Cardboard ( x2 ) Shuriken v1.0 ( x2 ) ( x1 ) Assembly 1. Print out this sheet of paper. 2. Cut out each of the patterns. Make sure to cut out the holes in the center. 3. On a piece of correagated cardboard, trace 1 of the large, 2 of the small and 1 of the circle 4. Cut out the pieces out of cardboard 5. Glue the pieces together (suggested to use hot-glue). See Figure 1 6. Using hotglue, smooth the edge from the circle to the layer below it. Add hot-glue around the edges an then smooth it out using the tip of the hot-glue gun 7. Repeat between the smaller shruiken and the larger, using the hot-glue to build up the edge so that it flows from one piece to the other 8 . Take your glue-gun and cover the edges of the shruiken with hot glue, using the glue gun to smooth the edges out. 9. Using an exacto knife, carefully trim the excess hotglue from the edges if there is any. 10. Paint your shuriken and then use a fine tip sharpie to detail. Original Concept by Featherweight. Edited by Unknowbie.
Pages to are hidden for
"how to make a paper shuriken"Please download to view full document