ASSEMBLING INSTRUCTION ROUND CONFERENCE TABLE COMPONENTS HARDWARE

Document Sample
ASSEMBLING INSTRUCTION ROUND CONFERENCE TABLE COMPONENTS HARDWARE Powered By Docstoc
					         ASSEMBLING INSTRUCTION                                                                                    COMPONENTS

                                       SERIES




                                                            1   DESKTOP                        2       BASE DRUM




                                                                                                                    HARDWARE

                                                            3                   4
      ROUND CONFERENCE TABLE

                                                         1/4" x 1 3/8"
                                                                               GLIDE
                                                           SCREW


 TOOL REQUIRED :
 - PHILLIPS HEAD SCREW DRIVER AND FLAT HEAD SCREW DRIVER


                                                                                                                            3
                                                                                                                      3                  3
                                                                                                                                   3                                      4
                                                                                                                                                        4
                                                                                                                                                                                        4
                                                                                                                                                                              4


                                                                                                               Detail 1                               Detail 2




Step 1                                              Step 2
  a. Place the tabletop on the soft carpet          a.   Put the table base drum on the table top.
     (recommended) at the final position with the   b.   Position the base drum so that the predrilled holes at the upper front / rear braces of the base drum meet the holes at the tabletop.
     drilled surface on the top.                    c.   Attach the table base drum to the tabletop by using ¼ " x 1 3/8" screws.(See detail 1)
                                                    d.   Insert the glides into the base drum .(See detail 2)




                                                                                                                   COMPONENTS




                                                           1    DESKTOP                            2    BASE DRUM




                                                                                                                    HARDWARE

                                                           3                   4
                SINGLE TOP
             CONFERENCE TABLE
                                                         1/4" x 1 3/8"
                                                                               GLIDE
                                                           SCREW


 TOOL REQUIRED :
 - PHILLIPS HEAD SCREWDRIVER


                                                                                                                            3
                                                                                                                      3                  3
                                                                                                                                   3                                      4
                                                                                                                                                        4
                                                                                                                                                                                        4
                                                                                                                                                                              4


                                                                                                               Detail 1                               Detail 2




Step 1                                              Step 2
  a. Place the tabletop on the soft carpet          a.   Put the table base drum on the table top.
     (recommended) at the final position with the   b.   Position the base drum so that the predrilled holes at the upper front / rear braces of the base drum meet the holes at the tabletop.
     drilled surface on the top.                    c.   Attach the table base drum to the tabletop by using ¼ " x 1 3/8" screws.(See detail 1)
                                                    d.   Insert the glides into the base drum .(See detail 2)