Step By Step Instructions

							Step By Step Instructions

Getting Started:
To begin the Ralph Lauren Fabric Techniques,
you will need to divide your room into equal
increments. Follow these instructions for the
Denim, Chambray and Linen Techniques.

Measure:
• Measure the width of your walls and
  divide into equal sized sections.     We
  recommend each panel be approximately
  42” wide. The exact measurement will
  depend upon the length of your walls.
• Use a level and pencil to draw even lines
  from top to bottom of the wall. Lay down
  2” Painter’s Masking Tape along the edge
  of the line. Make sure to keep the tape
  straight.

Tape:
• Press firmly on the tape to secure the
   edges.
• After completing each section, remove
   tape while glaze is still wet.
• Allow first sections to dry for 24 hours.
• To tape second section, place the tape on the dried glaze with the edge ending
   exactly where the dried glaze ends.