HOW TO USE
UniBond No More Big Gaps
HOW TO USE
1. Ensure that the surface is sound, dry and free from grease and dust.
2. Hold the can away from your face whilst removing the cap.
3. Lightly spray the cavity with water using a plant spray.
4. Carefully screw the nozzle fully on to the valve. Do not over tighten. Do
not push nozzle onto the valve.
5. Shake the can vigorously for 15 seconds before use.
6. *No More Big Gaps can be used at any angle, but for optimum results
TURN THE CAN UPSIDE DOWN AND SQUEEZE THE TRIGGER GENTLY.
7. IF THE FOAM SHOULD FAIL TO DISPENSE. DO NOT TAMPER WITH THE
CAN OR VALVE. NEVER USE TOOLS IN OR ON THE VALVE.
8. Carefully apply the foam to the base of the cavity and work upwards.
Occasionally stop applying foam, and shake the can before recommencing
application.
9. The foam will expand to double the initial dispensed volume.
10. The foam will be tack free in about 20 minutes, and be fully cured in
about 24 hours.
11. Cured foam can be cut, sanded, plastered or painted.
12. The cured foam must be coated if it is exposed to sunlight.
CLEANING
• Spillages on skin should be removed with a dry clean cloth.
• Spillages on other surfaces should be removed immediately with nail
varnish remover. Cured foam can only be removed mechanically.
For further technical or practical advice on this or any other Henkel product, please email
technical.info@henkel.co.uk
Call 01606 593933 (Monday to Friday 9am to 5pm. Saturday 9am to 12 noon)
Or Write to:
Technical Information
Henkel Consumer Adhesives
Road 5
Winsford Industrial Estate
Winsford
Cheshire CW7 3QY
HOW TO USE
UniBond No More Big Gaps
HOW TO USE
1. Ensure that the surface is sound, dry and free from grease and dust.
2. Hold the can away from your face whilst removing the cap.
3. Lightly spray the cavity with water using a plant spray.
4. Carefully screw the nozzle fully on to the valve. Do not over tighten. Do
not push nozzle onto the valve.
5. Shake the can vigorously for 15 seconds before use.
6. *No More Big Gaps can be used at any angle, but for optimum results
TURN THE CAN UPSIDE DOWN AND SQUEEZE THE TRIGGER GENTLY.
7. IF THE FOAM SHOULD FAIL TO DISPENSE. DO NOT TAMPER WITH THE
CAN OR VALVE. NEVER USE TOOLS IN OR ON THE VALVE.
8. Carefully apply the foam to the base of the cavity and work upwards.
Occasionally stop applying foam, and shake the can before recommencing
application.
9. The foam will expand to double the initial dispensed volume.
10. The foam will be tack free in about 20 minutes, and be fully cured in
about 24 hours.
11. Cured foam can be cut, sanded, plastered or painted.
12. The cured foam must be coated if it is exposed to sunlight.
CLEANING
• Spillages on skin should be removed with a dry clean cloth.
• Spillages on other surfaces should be removed immediately with nail
varnish remover. Cured foam can only be removed mechanically.
UNIBO ND NO MO RE BIG G A PS
Contains Diphenylmethane – 4,4’ -
diisocyanate.
Extremely flammable.
Harmful by inhalation.
Irritating to eyes, respiratory system and
skin.
HA RMFUL EXTREMELY FLAMMABLE
May cause sensitisation by inhalation and skin contact. Contains isocyanates. See
information supplied by manufacturer. Do not breathe vapour. Wear suitable
protective clothing and gloves. Avoid contact with skin and eyes. In case of contact
with eyes, rinse immediately with plenty of water and seek medical advice. In case of
accident or if you feel unwell, seek medical advice immediately (show the label where
possible). Use only in well ventilated areas. Keep away from sources of ignition – NO
SMOKING. Keep out of the reach of children. Do not empty into drains. This material
and its container must be disposed of in a safe way.
Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50ºC.
Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material.
Henkel Consumer Adhesives, Winsford, Cheshire CW7 3QY. Tel: 01606 593933.
For further technical or practical advice on this or any other Henkel product, please email
technical.services@henkel.co.uk
Call 01606 593933 (Monday to Friday 8.30am to 6pm. Saturday 9am to 4pm)
Or Write to:
Technical Information
Henkel Consumer Adhesives
Road 5
Winsford Industrial Estate
Winsford
Cheshire CW7 3QY