Get documents about "AVR-4308CI 3808CI Upgrade New Feature Instructions
Document Sample
AVR-4308CI / 3808CI
Upgrade New Feature
Instructions
Table of Contents
1. Before Updating
- Requirements --------------------------------------- P1
- Recommendations ------------------------------------- P1
- Key Notes on Network Environment Configuraitons - P1
- About System Setup Memory ------------------------- P1
2. Basic Operations ---------------------------------------- P2
3. Install New Feature ---------------------------------------- P3 - P5
4. After The Upgrade ---------------------------------------- P6
10/1/2008
Denon Electronics (USA), LLC.Denon Electronics (USA), LLC. Denon Brand Company
100 Corporate Drive, Mahwah, New Jersey 07430 USA D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
TEL: 201-762-6500 usa.denon.com Kanagawa, 210-8569, Japan
1. Before Updating AVR-4308CI
AVR-3808CI
Requirements
- Broadband Internet Access
- Cable/DSL Modem
- Network Router or Hub
- Proper configuration of the Denon A/V component to work on a particular Network Environment
- Ethernet ‘Straight’ Cable for Direct connection to the Network Environment
Recommentations
- If you did not install, or configure, the Denon A/V Component with your Network Environment, please
contact your Network Installer/Integrator to assist.
- If connecting the Denon A/V Component to your Network Environment for the first time, please read the
following sections in the ‘Instruction Manual’ provided with your component.
‘Network Audio’ : AVR-3808/4308CI Instruction Manual, page 20
‘Network Setup’ : AVR-3808CI Instruction Manual, page 32, AVR-4308CI Instruction Manual, pages 32-34
- Connect the Denon A/V Component directly to your Network Environment via an Ethernet ‘Straight’ Cable.
Denon does not recommend using Wi-Fi network connectivity when updating/upgrading the components. This is due to the higher
possibility of errors in the update/upgrade process from decreased, and/or drop outs of Wi-Fi signals as well as interruption from other nearby
Wi-Fi, or other Radio Frequency generating devices.
- Once the Denon A/V Component is connected and configured properly to your Network Environment,
please test that you can receive and listen to Internet Radio stations on the ‘Net//USB’ input.
This will show you have, at a minimum, a good Internet connection to the component.
- Be sure not to 'Power Off' the unit during the update/upgrade process as this will cause a failure in the
process.
If this does occur and the unit will not respond normally, please contact Denon USA Customer Service at 1-800-497-8921.
Key Notes on Network Environment Configurations
- Denon A/V Components are not compatible with PPPoE (Point to Point Protocol over Ethernet).
Contact you Internet Service Provider (ISP) to assist in procuring a PPPoE Router.
- Denon A/V Components are not UPnP (Universal Plug and Play) compliant.
This could be an issue with some routers on the market (we have seen this on some NetGear products). You can disable UPnP in the
router’s setup configuration, however changing this setting can affect the normal operation of other devices on your Network.
Contact your Router manufacturer for assistance.
- Some ‘Firewall’ settings in your network router may not permit the Updating/Upgrading functionality of
Denon A/V Components. Contact your Router manufacturer for assistance.
- Be sure to disable "VPN" on any PC on your network environment. Company or office network
connections will cause a failure in the process.
About System Setup Memory
- The Update Firmware will not reset the system setup configurations of your Denon A/V component.
Note that after downloading and installing the Upgrade Feature Pack (from October 1st, 2008), you will need to recalibrate your system using
the Audyssey Room EQ in the component. This is required for you to get the best level of performance from the newly added Audyssey
features of Dynamic Volume and Dynamic EQ.
Denon Electronics (USA), LLC.Denon Electronics (USA), LLC. Page 1 Denon Brand Company
100 Corporate Drive, Mahwah, New Jersey 07430 USA D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
TEL: 201-762-6500 usa.denon.com Kanagawa, 210-8569, Japan
2. Basic Operations AVR-4308CI
AVR-3808CI
Basic Operations
Menu Icon Highlight Cursor
Selectable Item
Text guidance
On-Screen Interactive Display
A/V Receiver (shown 4308CI)
'MENU Key' : Show On-Screen Interactive Display
'ENTER Key' : Select
'Cursor Keys' : Move Highlight Cursor
NOTE:
Be sure 'AMP key' is flashing, and that the
Front Panel Remote Control remote is in "Main Zone" mode, see the
following instruction manual section
"Remote ControlUnit Operations".
AVR-4308CI : page 61
AVR-3808CI : page 59
Denon Electronics (USA), LLC.Denon Electronics (USA), LLC.
Page 2 Denon Brand Company
100 Corporate Drive, Mahwah, New Jersey 07430 USA D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
TEL: 201-762-6500 usa.denon.com Kanagawa, 210-8569, Japan
3. Install New Feature (1/3)
AVR-4308CI
AVR-3808CI
1. Select "Manual Setup"
- Press the ‘Menu’ key on the remote control or on the
Front Panel of the AVR.
- Pressing the ‘Down Cursor’ key, highlight the icon
(shown as a pair of pliers, a screwdriver and a wrench)
for “Manual Setup”
- Press the ‘Right Cursor’ key to enter “Manual Setup”
On-Screen Interactive Display Front Panel Display
2. Select "Option Setup"
- Pressing the ‘Down Cursor’ key, highlight the icon
(shown as a briefcase) for “Option Setup”
- Press the ‘Right Cursor’ key to enter “Option Setup”
On-Screen Interactive Display Front Panel Display
3. Select "Add New Feature"
- Pressing the ‘Up Cursor’ key, highlight
“Add New Feature”
On-Screen Interactive Display Front Panel Display
Denon Electronics (USA), LLC.Denon Electronics (USA), LLC. Denon Brand Company
100 Corporate Drive, Mahwah, New Jersey 07430 USA
Page 3 D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
TEL: 201-762-6500 usa.denon.com Kanagawa, 210-8569, Japan
3. Install New Feature (2/3)
AVR-4308CI
AVR-3808CI
4. Check "New Feature List"
- With the "Upgrade" button highlighted, press the
‘Enter’ key to Execute the Upgrade Process
On-Screen Interactive Display Front Panel Display
5. Confirming Upgrade
- With the "Yes" button highlighted, press the
'Enter' key to execute the update.
- If you do not wish to proceed with the update, press
the 'Right Cursor' key to highlight the "No" button,
then press the 'Enter' key to exit the update procedure.
On-Screen Interactive Display Front Panel Display
6. Start Upgrade
On-Screen Interactive Display Front Panel Display
Denon Electronics (USA), LLC.Denon Electronics (USA), LLC.
Page 4 Denon Brand Company
100 Corporate Drive, Mahwah, New Jersey 07430 USA D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
TEL: 201-762-6500 usa.denon.com Kanagawa, 210-8569, Japan
3. Install New Feature (3/3)
AVR-4308CI
AVR-3808CI
7. Firmware Upgrade is In Progress
- Unit goes into update mode.
- The 'Standby' power indicator will go "Red" and
the On Screen Interface will turn off.
- Update process information can be seen on the
Front Panel Display.
Power indicator will go RED
8. Complete Upgrade
- Unit will automatically complete process and
repower itself 'On'.
- The "Standby Power" indicator will turn green.
Power indicator will go Green
9. Confirm Upgrade Status
- Pressing "Down Cursor" key, highlight
“Upgrade Status” and press "Enter" key
- Upgrade Status page shows you the features added
in the Upgrade Feature Pack
Denon Electronics (USA), LLC.Denon Electronics (USA), LLC. Denon Brand Company
100 Corporate Drive, Mahwah, New Jersey 07430 USA
Page 5 D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
TEL: 201-762-6500 usa.denon.com Kanagawa, 210-8569, Japan
4. After The Upgrade
AVR-4308CI
AVR-3808CI
Perform Audyssey MultEQ System Calibration
- Once the Upgrade Feature Pack has been successfully downloaded and installed, you will
need to perform the Audyssey MultEQ System Calibration Setup again.
- Previous calibration settings have been erased as part of the upgrade.
This is required due to the new Audyssey Features (Dynamic Volume and EQ) that were added
as part of the upgrade.
- No other settings in your System Setup have been changed or deleted.
Support
If you have problem for updating, please contact Denon USA Customer Service
Customer Service hours of operation:
9:00 AM to 5:00 PM ET, M-F
1-800-497-8921
During peak call-in times or for after hours Tech and Operational self help support,
please use our online FAQ database.
http://denon.custhelp.com/
Denon Electronics (USA), LLC.Denon Electronics (USA), LLC.
Page 6 Denon Brand Company
100 Corporate Drive, Mahwah, New Jersey 07430 USA D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
TEL: 201-762-6500 usa.denon.com Kanagawa, 210-8569, Japan
Related docs
