Product Manual PDF (PDF) by BluePacSolar

VIEWS: 142 PAGES: 1

									                                                                                                                             OPERATING INSTRUCTIONS                                                                                  Using the stove                                                                                    Preheating the stove                                                              2. After fuel has been primed to the stove, ignite the fuel through the ignition port with a
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Extinguishing the stove
                                                                                                       - Before using the Brunton Bantam stove, please read and follow all the steps                                                                                                                                    - Before using the stove with white gas, it is necessary to pre-heat the fuel. This is called     lighter or a match to preheat the generator pipe.                                                                           1. To extinguish the stove, turn the valve knob to the OFF position and flip the bottle over.
                                                                                                                                                                                                                       1. Unfold the stove legs and place the stove on a flat surface.
                                                                                                         below carefully.                                                                                                                                                                                               priming the stove.                                                                                3. After pre-heating (1-2minutes) slowly open the valve to allow fuel to flow through the                                   NOTE: The stove will continue to burn for a short time until all of the fuel in the generator tube


              BANTAM
                                                                                                TM
                                                                                                                                                                                                                                                                                                                                                                                                                          generator unit. The flame may appear yellow for the first minute of operation but should                                    and fuel hose is consumed.
                                                                                                                                                                                                                                                                                                                                                                                                                          settle to a crisp blue flame that is the normal cooking flame. If an excessively high yellow                                                                             Flip
                                                                                                                                                                                                                                                                                                                        1. Turn the valve knob counter clockwise to the (ON) position and wait 1-2 seconds until the
                                                                                                                      Filling the fuel bottle                                                                                                                                                                           jet emits a small amount of fuel onto the priming pad then close the valve by rotating the knob   flame is evident, turn off the stove and repeat the preheating process.
                                                                                                                                                                                                                                                                                                                        counter clockwise to the (OFF) Position. If fuel does not flow, the fuel bottle is low on         4. Never allow fuel to overflow from the stove base, as leaking fuel will ignite and may
                                                                                                        1. Pour the fuel up to the fill line on the bottle. Do not overfill.                                                                                                                                            gas and the bottle may need preasurizing or more fuel.                                            cause a fire hazard and serious injury.
                                                                                                        2. Insert pump and turn clockwise to tighten.                                                                                                                                                                                                                                                                     5. If the flame decreases in intensity, further pressurization of the fuel bottle is required.
Instructions for 81-100726



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     Small flame remains for 2-3
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     minutes consuming all the fuel in
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     the hose.
                                                                                                                          fill line

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      2. After the fire extinguishes, the stove will remain hot, wait until the stove cools down.
                                                                                                                                                                                                                                                                                                                                                                                               1-2 seconds                                                                                                                                            3. Separate the stove from pump.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      4. Fuel bottle and pump can be transported as a connected assembly. When separating the
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         pump from fuel bottle, turn the pump slowly so that the pressure retained inside the fuel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                y
                                                                                                        3. Before pumping pressure into the fuel                                                                                                                                                                                                                                                                                                                                                                                                         bottle can release gradually.
                                                                                                        bottle, ensure that the control valve for the
                                                                                                        stove unit is set to the OFF position. Pump                                                                    2. After connecting the flexible hose to
                                                                                                        the handle on the pump set to pressurize                                                                       the pump, ensure that the fuel bottle is                                                                                                                                                                     Manual ignition
                                                                                                        the fuel bottle (20 strokes).                                                                                  placed on a flat surface.
                                                                                                                                                                                             20-30 times
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Hissing
                                                                                                        NOTE: Less fuel in the bottle needs more                                                                                                                                                                                                                                                                                                                                                                Turn slowly counter-
                                                                                                        pumping strokes to pressurize the bottle.                                                                                                                                                                                                                                                                                                                                                               clockwise after preheating


Use outdoors only and do not allow children to reach                                                                                                                                                                                  WARNING
Please read, understand and follow all instructions and warnings before using this                                    WARNING                                                                                                Using the stove on uneven surface is very dangerous and may cause a fire hazard
product. The proper fuel bottle for this product is included.                                                                                                                                                                and serious injury.                                                                                       WARNING
                                                                                                            To avoid the possibility of serious injury, use only a Brunton pump and bottle.                                  When the fuel bottle has been connected to the pump be sure that the valve knob is set                                                                                                                                                                                                                                               Inner pressure exclusion                               Separation
                                                                                                                                                                                                                                                                                                                              Before igniting the stove, ensure that the valve knob is turned to
                                                                                                            Use only White Gasoline, other fuel could clog the nozzle and may cause a fire hazard.                           to the OFF position.                                                                                                                                                                                   Preheating                               Working
                                                                                                                                                                                                                                                                                                                              the clockwise (OFF) position.
                                                                                                            Keep away from children.                                                                                         When the stove is in use, keep fuel bottle as far away as possible.
                                                                                                                                                                                                                                                                                                                              Never place your head or body above the stove when lighting it.
                                    www.brunton.com


PARTS REPLACEMENT AND MAINTENANCE                                                                       Stove parts                                                                                                                    Poor performance & nozzle clogging                                                                                    WARRANTY

                                                                                                                                                                                                                       - Colgging inside the nozzle or generator tube may disturb the fuel and create poor stove          Brunton warrants this product to be free of defects in workmanship and materials for the
          Checking & replacing seals and 0-rings                                                                                                                                                                                                                                                                          lifetime of the original owner, and is nontransferable. If you have any problems with your
                                                                                                                                                                                                                         performance.
                                                                                                                                                                                            head
                                                                                                                                                                                                                       - Remove clogging inside the nozzle hole with a nozzle pin.                                        Brunton stove, the stove should be returned to the dealer or sent to Brunton, 2255
Dried or torn parts need to be replaced. Check the color and size and any printed                                                                         leg pin                                                      - If clogging persists inside of the nozzle or generator tube, a more thorough cleaning            Brunton Court, Riverton, WY 82501 U.S.A. Please contact Brunton at the number below
markings and contact your nearest Brunton stock list or retailer for replacements.                                                    leg A                                                 oil plate
                                                                                                                                                                                                                         is required.                                                                                     to obtain RA#. Clean food and soot from stove before shipping. Shipping cost to Brunton
(Oil seals, Oil, Nozzle, Tool kit)                                                                                                    o-ring                                                                                                                                                                              is the responsibility of the purchaser. Return postage will be paid by Brunton. Please
                                                                                                                                                                                           leg B                               A) How to clean with nozzle pin
                                                                                                                                      leg B                                                                                       1. Turn off the stove valve and wait until the stove has completely                     return this warranty card to Brunton as a proof of purchase. This warranty does not cover
                                                                                                                                                                                                                                                                                                                          damage caused by accident, misuse, abuse, or tampering. A nominal charge will be
                                                                                      pump knob                                                                                                                                      cooled down.
                                                                                                                                                                                                                                                                                                                          assessed to repair such damage.
                                                                                                                                                                                                                                                                                                                                                                                                                                          VISIT OUR WEBSITE AT www.brunton.com
                                                                                                                                                                                                                                  2. Remove the Jet by disassembling and removing the generator tube
                                                                                    pipe bolt
 Pump parts                                                                                                                                                                                                                          assembly from the stove with the tool kit.
                                                                                pipe bushing                                                                                   ring                                               3. Clean the jet with the nozzle pin                                                                                 2255 Brunton Court, Riverton, WY USA 82501
                                                                                                                                                guide spring                                                                      4. Re-Assemble the stove and check for any fuel leaks.                                     www.brunton.com           PH: 307.857.4700
                                                                              guide spring                                                                                     wave washer
                                                                                                                                                      guide
                                                                                                                                                                               venturi



                                                                      guide
                                                                                                                                                                                                        nozzle
                                                                                                                                 pump knob                                                                                                                                                                                                                                                                                 Warranty card must be filled out completely and returned within 30 days with proof of purchase for warranty to be valid.
                                                                                                                                                                                                        filter                                                                                                                                        LIMITS OF LIABILITY
                              packing washer                                                                                                       nozzle
                                                                                                            nozzle            hose cap             body nut           heating pipe                      heating pipe                                                                                                                                                                                                      BRUNTON
                                                                                                            connect bolt                                              bolt                                                                                                                                                                                                                                                ATTN: WARRANTY DEPT.
                             guide washer                                                            nozzle                         nozzle
                                                                                                     connect nut      o-rings       connect               hose washer                                                                                                                                                    Brunton assumes no responsibility for any inconvenience, loss, or injury, direct or              2255 BRUNTON COURT
                           packing holder                                                                                                                                             nozzle body                      - If cleaning the Jet does not improve the stove efficiency, clean the generator tube as well.    consequential damage arising from possession or use of the goods. This warranty gives            RIVERTON, WYOMING 82501
                         packing rubber                                                                                                                                                                                        B) How to clean the generator tube                                                        you specific legal rights which may vary from state to state. Check with your local state        307.857.4700

                    connect bushing
                                                         setting bushing                                                                       hose            valve                                                              1. Begin by removing the generator tube assembly from the stove with                   about your rights.
                                                                                                              pipe bolt
                                                                 spindle                                                                                       connect                                                               the tool kit.                                                                                                                                                                        BRUNTON WARRANTY REGISTRATION
       head assembly                                                 setting bolt                        pipe bushing                                                                                                             2. Pull the wire out brush clean of any debris and replace
                                                                                                                                                 valve connect bolt                                                                                                                                                                                                                                                       NAME_______________________________________________________
                                                                                                                                                                                                                                  3 . Re-Assemble the stove and check for any fuel leaks                                                                                                                                  ADDRESS___________________________________________________
                   housing cap
                                            housing
                                                                   knob
                                                                                                                                                                                                                                                                                                                                                                                                                          CITY_________________________ST/PROV_______ZIP__________
         nylon hose
                                                         o-rings                                                                                                                                                                                                                                                                                                                                                          PHONE _______________________EMAIL_______________________
                                                pipe                                                                                                                                                                                                                                                                                                                                                                      MODEL#__________________DATE PURCHASED____________
     filter                                    o-rings                                                                                                                                                                                                                                                                                WARNING                                                                             PURCHASED FROM_______________________________________
                                     air bushing body                                                                                                                                                                                                                                                                                                                                                                     CITY_________________________ST/PROV_______ZIP__________
                                    o-ring
                                                                                                                        WARNING                                                                                                                                                                                             Only use in well ventilated areas.          Keep well away from children.
                                                                                                                                                                                                                                                                                                                                                                                                                          PRICE PAID $___________________                         1006
                                    air bushing                                                                                                                                                                                                                                                                             Do not leave unattended while in use.       Do not operate near flammable materials.
              air bolt                                                                                      After disassembling and assembling, be sure to check for leakage with soapy water.
                                  air spring

								
To top