Linksys ATA Setup Guide

Document Sample
Linksys ATA Setup Guide Powered By Docstoc
					                                                                                  Linksys ATA Setup Guide



The Linksys ATA Telephone Adapter with 2 Ports for Voice-over-IP

    •    Feature-rich telephone service through your Internet connection.
    •    Two standard telephone jacks for use with standard telephones including cordless phones or fax machines, with
         independent phone numbers.
    •    Compatible with all common telephone features: Caller ID, Call Waiting, Hook Flash Transfer, Voicemail, etc.




1. PLUG IN YOUR ATA
Follow the included instructions on plugging in the ATA adapter.

2. GET YOUR IP ADDRESS
From the analog telephone, dial ****
The operator says: configuration menu.
Dial 110#.
The prompt will repeat your entry.
Listen for the IP Address of the Linksys.

3. BROWSE YOUR ATA
Open your internet browser (internet explorer)
Type the IP Address that you heard in the Address bar. Press Enter or Click Go.

See Illustration:




www.broadcore.com                             1-800-942-4700                                               Page 1 of 2
                                                                    Linksys ATA Setup Guide


    4. CONFIGURE ATA
                2. CLICK LINE 1          1. CLICK ADMIN LOGIN




                                                    Auth ID:       See your account Rep
Line Enable:     Select yes                         Use Auth ID: Select yes.
Proxy:           See your account Rep               Choose Preferred Codec: (Default is G711u)
Display Name:    See your account Rep
User ID:         See your account Rep


Password:        See your account Rep

    www.broadcore.com                   1-800-942-4700                                           Page 2 of 2