LCD Projector User Guide

							                       LCD Projector User Guide
Laptop Use
Step One
Ensure that the projector is switched on at the mains, using the power switch labeled Projector.
Step Two
Using the remote control press the power button (1) and select RGB (2)
Step Three
Connect up the laptop with the long lead marked with bright yellow ties. Ensure that the laptop is plugged
into the mains and the network lead is connected, then using the key attached to the network cable turn the
switch to 1, this activates the network socket.
Step Four
Turn on the laptop and log in, you will need to toggle with the FN and F5 keys to get the picture on the
screen and laptop screen simultaneously.

       2                                               1
3                                                                                3
                                 1                                                   2
                                     V1
                                                                                     V1 not
                                                                                     required on
                                                                                     this remote


                                                  V2                                                 V2




Video Use
Step One
Ensure that the projector is switched on at the mains, using the power switch labeled Projector.
Step Two
Using the remote control press the power button (1) and select Video (3)
Step Three
Turn on the Video player and put in your tape, press stop otherwise the tape may auto play.
Step Four
Press play on the video and adjust the volume by pressing (V1) then using the (V2) buttons.


To turn off the projector press power button (1) and follow on screen instruction