USER MANUAL of CLIENT by bzh37299

VIEWS: 10 PAGES: 13

									Digital Network Surveillance Recorder System




      USER MANUAL of CLIENT
                                INDEX
            . System configuration and software installation       ---------- P2
                 1. System configuration ----------------------------------- P2
                 2. CLIENT (CMS) S/W installation       --------------------- P2
                 3. HOW TO SET CLIENT PC’S NETWORK ------------------ P4


           . HOW TO USE CLIENT -------------------------------------------- P5
                   - Default screen and function explanation------------- P5
                   - 2-Way Audio -------------------------------------------- P6
                   - CLIENT’s CIRCUMSTANCES SETTING ----------–----- P8
                   - SERVER & GROUP MANAGEMENT –------------------ P9
                   - REMOTE SERVER SETUP ------------------------------- P11
                   - REMOTE ACCESS / SAVING ---------------------------- P13
                   - HOW TO SEARCH THE DATA VIA CLIENT ------------- P13




                                                                                   1
Digital Network Surveillance Recorder System


   . System configuration & Software installation
 1. System configuration
=====================================================
        CLIENT is software to access server problem via network.
        After accessed to server program via network, CLIENT software can do remote viewing, searching,
        recording, setting, and controlling, and can control of server functions.
        CLIENT can access 16 UDVR4’s and accordingly can do 80 cameras’ monitoring.


 2. CLIENT software installation
=====================================================
        Insert the CD with CLIENT program into the proper PC.
        (E.g.: Click “E: X-DVR Program setup.exe”)
        It is installed as follows. (Next –> Install –> Finish)


1. Double click “setup.exe”                              2. Click, “Next(N)”




 E.g.) D: UDVR-HQ Program setup.exe




                                                                                                    2
Digital Network Surveillance Recorder System

3. Click “Next(N)”                             4. Click “Next(N)”




5. Click “Next(N)”                         6. Click “Next(N)”




7. Decompress and copy                     8. Installation completed




                                                                       3
Digital Network Surveillance Recorder System

 3. HOW TO SET CLIENT PC’S NETWORK
=====================================================
   1. TCP/IP SETTING
        Example of Windows XP


                                                            Network connection setting
                                                        1. Click “network connection”.
                                                        2. “Begin”-“Set”-“Network set”




Double click “Local area set” or click the
right button of the mouse to “Properties”




          Select “Internet protocol (TCP/IP)” and then click “properties”.
          “The following IP address selection(S):” After choosing this, input IP addess, Subnet mask, Basic
          gateway.
          If you don’t use static IP, (e.g. ADSL, VDSL, cable modem etc which runs DHCP server
          through static IP) select “Automatically receives IP adress”.

                                                                                                        4
Digital Network Surveillance Recorder System


  . HOW TO USE CLIENT

 1. Default screen and function explanation
=====================================================




                             < CLIENT defult screen >

       Monitoring screen windows: camera images, camera connection information is shown.
       [Camera information]
               Camera title: Set camera title
               Saving and event: [R]Recording, [S]Sentor, [M]Motion
       Select cameras: You can select cameras.


                                      ~~~~


                                      ~ ~ ~ ~…

                 Push the number of the cameras you will select.

                                                                                     5
Digital Network Surveillance Recorder System

       Screen splt / screen switch
         [Screen split]


                              : 1, One split (Auto/manual)



                              : 4, Four split (Auto/manual)



                              : 6, Six split(Auto/manual)



                              : 9, Nine split (Auto/manual)


                              : 10, Ten split(Auto/manual)


                              : 13, Thirteen split(Auto/manual)


                              : 16, Sixteen split(Auto/manual)



                              : Switch to full monitor(frame screen siwtch: click the right button

                of the mouse)


                             :   Auto screen switch (designate the time at switch over time

                designation, default time: 3 seconds)
        Mic connection / Disconnection: Connect mic or disconnect. (2- Way Audio)
                The function for output of CLIENT PC’s mic input through server speaker.
                 (Usage: remote alarming, voice call etc)


              : Activate bidirectional audio. (May be failed due to network error / server access denied)
               [Reference, “2-5 Network” (page23)


              : Disconnect bidirectional audio.




                                                                                                            6
Digital Network Surveillance Recorder System


        Speaker’s volume control
                The function to hear DVR Server’s audio signal via CLIENT program
                               : To eliminate audio

                                                 Volume controlling
                                                  scroll bar
                                                : To recover the eliminated audio




        Index information: Current date / time, saving info, recycled saving info




                                                 HDD capacity of recording

                        : One time recording (HDD gets full(100%), it stops recording.
                        : Recycled recording (HDD gets full, the oldest data are erased to continue
                  recording.




       Function buttons: Circumstances setting, Searching function


                 Circumstances setting: for CLIENT System
        [Authentication]: Needs authentication for setting.




                                        (Default password: “1111”)




                                                                                                7
Digital Network Surveillance Recorder System

        [Client’s circumstances setting]




         System
               Auto screen switching interval(unit: sec): auto screen switching interval set(second)
               Overlay check: Use or non-use and font selection
               Default screen mode: Default screen mode selction
         Dynamic IP server: dynamic IP server set
              Dynamic IP server address: Default genesisinc.dyndns.org, default port: 130
              Server response : In dynamic IP request, setting of response time

         Recording setting
              To select drive for recording
               Overwrite: In case of HDD full, it overwrites the oldest data gradually.


               Reconnect setup
               Reconnect: To automatically reconnect due to unexpected disconnect
               Use: Check or uncheck
               Connect interval: To set the reconnecting trying
          [Password change]



                                                                                                       8
Digital Network Surveillance Recorder System

       [Server management]




           Server: To manage IP address (DDNS address) for the connection with server
program.
             [Add]: To add new remote site’s IP address.


                                   Server name: Input server name.
                                   IP / DDNS ID: Server IP address or DDNS registered (supports
                                   dynamic IP using DDNS ID.)
                                   Port: Port for connecting server(default: 2000 port)
                                   Login save: To save user ID and password.
                                                           (Check it)
                                   User ID: Input user ID(default ID : admin)
                                   Password / Password confirm: (default: 1111)
                                   Click OK, and then it is registered.
                                   Click Cancel, and then it cancels registration.
           [Modify]: To modify the registered information


           [Remove]: To remove the registered information.



                                                                                            9
Digital Network Surveillance Recorder System


            Group: To manage the remote IP addresses in group.


            [Add]: To add a new group




                                                 Group name
                                                 Description




            [Modify]: To modify the registered group.




            [Remove]: To remove the registered group.


                  Search: To search the data.


                   Please refer to the part of “Search” on UDVR4 User manual [Page 30].




       Functions tap buttons: Camera status, PTZ control, server management, group
management etc.
        [Channel A]: #1 camera ~ #16 camera status
        [Group]: To show multiple servers in groups.
        [Server]: To show each server name that is registered at server management.
        [PTZ]: Can be used with P/T/Z cameras.
        [Channel B]: Not being used at the moment (Going to be activated in the future
        soon.)

                                                                                          10
Digital Network Surveillance Recorder System


               [Server]: To manage remote address lists registered at server management.
                            [Remote access order]
                                  Right click the server name that you need to access on the list.
                                  If you do right click, it shows “Connect”/”Remote setup”


                                  Select “Connect”, and then it tries to access that server.
                                  (All the cameras connected to the server are accessed.)


                                  If it fails to access, this windows will be disappeared




        [How to do remote setup]
             Select “Remote setup”, and it tries to do remote setup.
             If it fails to access, this window will be disappeared.
             If it succeeds, you will see the screen below.




                 Please refer to the page 16 on UDVR4 User manual.




                                                                                                     11
Digital Network Surveillance Recorder System


              [Group]: To manage the group lists which are registed at group server management.
                           [Group access order]
                               Right click the proper group name on the list.
                               If you do right click on a group, “connect” will be shown.
                               Select “Connect”, and then it tries to access the registered servers.
                               (All the registered servers at the proper group)


                               If it fails to access, this window will be disappeared.




                                                                                                       12
Digital Network Surveillance Recorder System

          Remote access /Saving


                                                  [Server access order]


                                                             Click “connect” icon.
                                                  Select server name
                                                  Input user ID
                                                  Input password
                                                  “Server connect”: Click “Server connect”
                                                  If it fails to access, this window will be disappeared.




            [Group connect order]


                        Click “connect” icon.
                On the window above, select group name at Group connect mode.
                If it fails to access, this window will be disappeared.
            [How to save the data after connection]
                                                        Click “Channel A” icon.


                                                 Under already connected situation, do left click blue-
                                                 activated camera icons on the Pic 1, it turns into Pic 2 as
                                                 shown on the left.
                                                 If the camera icons turn into red color as Pic 2, it means
                                                 “saving”.
  Pic 1                      Pic 2


 2. How to search the data via CLIENT
      please refer to the part 4 of UDVR4 user manual.




                                                                                                            13

								
To top