On the instructions of Equiptrade Limited due to the

Document Sample
On the instructions of Equiptrade Limited due to the Powered By Docstoc
					             On the instructions of Equiptrade Limited due to the reorganisation of the company



                                   AUCTION
                                    Reconditioned and Used

  Crushers, Screens & Wash Plant
          Crusher Spares
         Workshop Equipment, Forklift truck, Peugeot Van
                 Office Furniture & Equipment
Crushers inc: 3 off Allis Chalmers Svedala Arba 4-36-8 & 1 off model H2000
hydraulic cone crushers, Symonds 24” & Parker 900 skid mounted cone crushers,
Pegson 1200 cone crusher, 5 off Brown Lennox Kue-Ken jaw crushers (95M
36”x24”, 42”x6”, 30”x18”, 36”x10”, 36”x12”), Lightning BW impact crusher, 2 off
Goodwin jaw crushers (30”x6”, 36”x6”) and 4’ rotary media mill.

Screen/washing inc: Morgensen 2036 5 deck screen with feeder, Morgensen
1554 5 deck screen, Rhewum WA10/135x225/2 twin deck screen, Skako 70682
250tph feeder, Linatex wash plant with screen, Wileman 2mx4m wash barrel
(rubber), various hoppers and conveyors.

Large quantity of crusher spares inc: liners, jaws, shafts, bowls, topshells, motors,
gears and more.

Workshop & general equipment inc: compressor, radial arm drill, 48” welding
positioner, 20m light tower, welding rectifiers, pressure washer, power tools, lifting
slings, racking, site containers, consumables, furniture and computer equipment.

Mobile: Caterpillar 12 ton forklift truck & Peugeot Boxer diesel panel van (51 plate).

Auction: 12.00 noon Tuesday 26 October 2004

Viewing: Morning of sale from 9.00am (or by prior appointment)

At: Blidworth Industrial Park, Burma Road, Blidworth, Nottinghamshire
NG21 0RT

Photographs available from www.assetbid.com
                                       Conditions of Sale

1)    All lots sold by the Auctioneer (being Tallon and Associates including employees, agents and
      any other parties nominated by Tallon and Associates) are sold subject to these conditions of
      sale and any further special conditions of sale stated in the catalogue. Where a special
      condition of sale is inconsistent with these conditions of sale then the special conditions will
      prevail.
2)    All Buyers bid on their own behalf as Principal. In instances where a bidder is acting as an
      agent for a named Principal then the Auctioneer should be notified in writing by the named
      Principal expressing authority for another to bid on their behalf. Following notification, the
      Auctioneer will consider the request and confirm their decision in writing. Under no
      circumstances should any bidder act on another’s behalf without this written consent.
3)    The Auctioneer reserves the right to:
       3.1)     Request proof of identity off any person(s) attending at the sale site and premises.
       3.2)     Refuse admission to the sale site and premises.
       3.3)     Request a registration deposit off any person(s) registering.
4)    The Auctioneer cannot be held responsible for any descriptive errors or authenticity of lots. No
      lots are sold as new and all goods are sold as seen without any warranty and with all faults and
      imperfections. Neither the vendor nor the Auctioneer shall be liable for any loss or damage
      suffered by the buyer. Prospective purchasers are therefore strongly advised to inspect lots
      prior to bidding to satisfy themselves. Tallon and Associates act as agent for the Seller and not
      as Principal.
5)    Unless otherwise stated the Seller reserves the right to sell any lot subject to a reserve and
      withdraw any lot subject to a reserve not being reached.
6)    Unless otherwise stated the Seller, their Representative or the Auctioneer may bid for any lots.
      7.1)      The Auctioneer may also reject any bid at his sole discretion.
7)    The auction will be conducted in accordance with the following conditions.
      8.1)      The highest bidder for each lot prior to the fall of the hammer will be the
                buyer of that lot. Should there be any dispute between bidders then the Auctioneers
                decision will be final and the Auctioneer also reserves the right to re-offer the lot.
      8.2)      The Auctioneer reserves the right to change, alter or withdraw any lot, to accept
                commission bids and to purchase goods on behalf of buyers.
      8.3)      No bid may be withdrawn after the fall of the hammer.
      8.4)      Buyers are strongly advised to insure all goods upon the fall of the hammer, as all
                risks in relation to lots shall pass to the buyer upon the fall of the hammer.
      8.5)      Title to the goods will not pass until all invoices relating to that sale are paid in
                full.
8)    All lots must be paid for in accordance with the payment terms stated in the catalogue. Should
      an account not be settled within the specified time scale, then the Auctioneer reserves the right
      to resell or dispose of the lots without incurring any liability to the buyer or without prejudice to
      any claims of the Vendor or Auctioneer against the buyer, for breach of contract. The buyer
      also forfeits any deposit paid to the Auctioneer. The Auctioneer also reserves the right to
      charge interest on outstanding accounts at 4% above the Natwest base rate.
9)    All lots must be removed from site in accordance with the site clearance terms stated in the
      catalogue. Should lots not be removed within the specified time scale, then the Auctioneer
      reserves the right to resell or dispose of the lots without incurring any liability to the buyer or
      without prejudice to any claims of the Vendor or Auctioneer against the buyer for breach of
      contract. The buyer also forfeits any deposit paid to the Auctioneer. The Auctioneer also
      reserves the right to charge the buyer rent and costs incurred due to non-removal of lots.
10)   All lots must be removed in accordance with the Health and Safety guidelines set out in the
      catalogue. In addition any lots purchased at the sale must not be used in the removal process
      unless the Auctioneer expresses in writing that he is satisfied the equipment complies with
      current Health and Safety standards. The Vendor nor the Auctioneer are liable for
      injury/accident sustained by any person(s) at the premises for whatever purpose.
11)   No electrical disconnection, flame burning, cutting, removal of dangerous and hazardous
      substances, mechanical lifting will be permitted until the buyer has completed risk assessments
      and method statements and the same has been authorised by the Auctioneer. In addition a
      copy of the Buyer’s or the Buyer’s contractors insurance will be required.
12)   Certain premises may hold plant and installations containing substances and chemicals
      governed by the 1974 Health and Safety at Work Act and the 1988 Control of Substances
      Hazardous to Health Regulations or any other act and legislation. It is the sole responsibility of
      the purchaser to comply with any relevant act and legislation. This may involve the use of
      licensed contractors at the Purchasers expense. The Vendor, Auctioneer, Agents or Servants
      cannot be held responsible for person(s) coming into contact with hazardous substances and
      chemicals.
13)   The Buyer will be responsible for all damage caused to the building, plant and machinery or
      other lots, be it caused by the Buyer or an his appointed contractor.
14)   No software or data, business records, plans, drawings, patents, tools or any other intellectual
      property is included with any lot unless stated in the lot description.
15)   All motor vehicles are sold as seen with no warranty given that the vehicle is safe or legal for
      use on Public Highways or private land.
16)   All bidding is exclusive of VAT and Buyers Premium (if applicable).
                        NOTICE TO PURCHASERS

   1. DIRECTIONS: From M1 Junction 28: Follow A608 towards Mansfield. From
      Mansfield take A60, sign posted Nottingham. Continue along this road until
      you reach the B6020 and turn left at the junction, sign posted Blidworth.
      Continue into Blidworth and through the town centre until you reach the fire
      station (on the right hand side). Turn right after the fire station onto Burma
      Road and continue down to the end. Equiptrade Ltd is located on the right
      hand side of this road.

   2. All persons entering the site must sign the visitors register and adhere
      to the site rules, as displayed on entry point to site.

   3. VIEWING: The site will be open for viewing form 9.00am on the morning of
      the sale until sale commencement or before by prior appointment with the
      auctioneers.

   4. Some items may be sold prior to the sale day and it is advisable to
      check with the auctioneers before travel on lot availability.

   5. SALE: The sale will commence at 12.00 noon on Tuesday 26 October 2004.

   6. BUYER’S PREMIUM: All lots will be subject to a 10% buyer’s premium and
      VAT @ 17.5% without exception.

   7. REGISTRATION: Any person wishing to bid must complete a registration
      form to obtain a bidder’s card. Full identification with address must be
      provided to the Auctioneers satisfaction. In the event that identification to the
      Auctioneers satisfaction cannot be provided, then the Auctioneer reserves the
      right to charge a refundable deposit (not less than £ 200) or not to issue a
      bidder’s card.

   8. PAYMENT: All accounts must be settled no later than 5.00pm on the day of
      the sale unless other arrangements have been made with the Auctioneers.
      Methods of payment may be Cash (up to a limit of £ 1,000), Bank Draft, Bank
      Transfer, Cheque supported with guarantee card to limit or Cheque supported
      by an original Bank Reference stating that cheque number ‘XXXX’ made
      payable to Tallon & Associates will be honoured to a level not exceeding
      £’XXXX’.

   9. CLEARANCE: The buyer, no later than Wednesday 3rd November 2004 must
      remove all lots purchased, unless prior arrangements have been made with
      Auctioneers.

HEALTH & SAFETY: All persons attending the sale must not switch on any
equipment, move any lots (until their invoice is paid in full) or enter any “ NON
ENTRY “areas. In addition, as stated in the conditions of sale, the removal of
some lots will be subject to risk assessments and method statements.
Standard forms will be issued and must be approved by the Auctioneer prior to
removing any lots.
Lot No Description


 1-32   Spare lots


        Stores

 33     A SIP Startmaster battery charger (12/24V)

 34     A 13 amp extension reel

 35     8 - 7' Phereical washers

 36     A Kue Ken 120 diaphragm with bolts

 37     A quantity of 7', 4 1/2' & 3' U Bolts

 38     A quantity of nails as lotted

 39     7 - Allis concave wear plates

 40     An electronic temperature control melting tank with MCP
        temperature probe

 41     A quantity of branding clips, bands with bander and tools

 42     3 - relief valves as lotted

 43     4 - boxes of assorted end caps as lotted

 44     A quantity of hydraulic fittings as lotted

 45     A quantity of welding hoses and equipment as lotted

 46     2 part bags of absorbent cloth as lotted

 47     A quantity of workshop consumables as lotted

 48     A 6 way multi-purpose hydraulic bearing puller (in case)

 49     4 - Markus stamp sets

 50     A quantity of drill bits and cup brushes

 51     A quantity of hand tools as lotted with snap on 2 tier tool chest

 52     A quantity of O rings

 53     Approx 8 ratchet straps (new)
54   A Cromwell lifting sling (new)

55   A quantity of First Aid equipment as lotted

56   A welding mask and accessories

57   A quantity of 100mm flat rubber seals

58   2 - Turfer ratchets

59   A quantity of assorted head nut spanners as lotted

60   A box of brand transfers (for crusher plants) as lotted

61   A box of protective gloves as lotted

62   A quantity of oils, grease and degreasers as lotted

63   A quantity of H/D morse taper drills

64   A quantity of spring housings, bolts and bearing pins as lotted

65   A Bux 110 Volt magnetic base drill

66   A hydraulic pipe tightening unit

67   A CP 1" pneumatic drive

68   A 110 Volt mobile oil pump

69   9 - boxes of 2 1/2 size belt fasteners

70   A large quantity of nuts, bolts, washers and general crusher fasteners

71   A quantity of bespoke extraction tools, bolts and threaded bar as lotted on 3 tiers of
     racking

72   A Rotabrouck 110 Volt magnetic base drill, ref no: 61

73   A similar drill, ref no: 67

74   A Makita 5703R 110 Volt portable circular saw

75   A Makita 110 Volt power drill

76   A Makita 3/4" 110 Volt drive

77   A Bosch GWS 7-115 110 Volt 4 1/2" grinder (boxed and unused)
78    A Bosch GWS 7-115 110 Volt 4 1/2" grinder

79    A similar lot

80    A similar lot

81    A Makita 9069 110 Volt 7 1/2" grinder

82    A Bosch GWS 20-230 110 Volt 7 1/2" grinder

83    A Metabo 550 240 Volt jigsaw

84    A Sealey 240 Volt polisher

85    A 240 Volt extension cable on reel

86    A 110 Volt extension cable on reel

87    A similar lot

88    A similar lot

89    A CP pneumatic pickling chisel

90    A heavy duty air pick with attachments

91    An inline pneumatic filler as lotted

92    2 - sledge hammers as lotted

93    A quantity of electrics as lotted

94    A quantity of taps and dies as lotted

95    A quantity of slogging spanners and large wrenches as lotted

96    A quantity of grinding and cutting wheels, discs and cloth as lotted

97    A RS manual hydraulic pump and ram

98    A SPX Power Team 110 Volt hydraulic power pump

99    A Dynapac 110 Volt hydraulic power pump

100   2 - 35 ton hydraulic rams as lotted

101   2 - 90 ton hydraulic rams as lotted

102   2 - 10 ton hydraulic rams as lotted
103   A 30 ton hydraulic ram as lotted

104   A quantity (6 off) hydraulic rams as lotted with various packing blocks, rings and
      fittings

105   A quantity of heavy duty sockets (1" & 1½”) with torque wrench, ratchet and quantity of
      slogging spanners

106   A quantity of flexible hose and drive belts as lotted

107   A quantity of shims as lotted

108   2 inner and 3 outer test nuts

109   A 7', 5½’, 4½’ flinger housings

110   8 - step plates (4¼’) as lotted with pins

111   An Allis 36" head nut

112   A pair of Allis 36" step plates

113   An Omnicone socket liner

114   A Pegson bottom sheet bush pin

115   A 4¼’ outer plastic bush

116   2 - 5½’ short head to unit rings

117   A bespoke bearing jig (bearing to shaft)

118   An Allis 36" counter shaft

119   A quantity of head ring gauges as lotted

120   A 7' step plate upper and centre steel plate

121   A 48" gyro bearing

122   A 2' outer brass bush

123   2 - 7' counter shaft brash bushes

124   A similar lot

125   A similar lot

126   2 - Omnicone brass socket liners
127   2 - 7' flingers

128   2 - 5½’ flingers

129   Approx 9 main frame brass bushes

130   A quantity of various spares as lotted

131   6 - 4¼’ cluster bolts

132   2 - oil pumps as lotted

133   A quantity of 4¼’ lock links, bolts and packing plates as lotted

134   10 - bays of 3 tier height adjustable racking (reserved delivery)

135   A Moore & Wright 150mm to 3m internal micrometer

136   A Mitutoyo 16" - 20" external micrometer

137   A Mitutoyo 20" - 24" external micrometer

138   A Starret 75mm - 200mm internal micrometer

139   A Moore & Wright 6" - 10" external micrometer

140   A Moore & Wright 11" - 12" external micrometer

141   A Moore & Wright 12" - 18" external micrometer

142   A GKN 75mm - 100mm external micrometer

143   A Mitutoyo 100mm - 125mm external micrometer

144   A Mitutoyo 125mm - 150mm external micrometer

145   A Mitutoyo universal bevel protractor

146   A Mitutoyo dial gauge

147   A Draper DG1 dial gauge mounted on magnetic stand

148   A Moore & Wright gear verneirs

149   An Oxford 4 set of external micrometers, 0 - 25mm, 25mm - 50mm, 50mm - 75mm
      & 75mm - 100mm

150   A Mitutoyo 45cm external / internal verneir caliper

151   A set of dividers & callipers
152   A Bonson 50" boxed vernier caliper

153   A 2m boxed vernier caliper as lotted

154   A SIR portable boring machine (40") with control panel and mountings

      Mezzanine Floor

155   10 - bays of 3 tier racking with a quantity of cross beams (note: reserved delivery)

156   A large quantity of patterns for the casting of various crusher parts (a full list is available
      from the auctioneers)

      Workshop

157   6 - bays of multi tier adjustable racking (note: reserved delivery)

158   4 – Omnicone oil seals as lotted

159   2 – ABM 3' std sealing rings

160   A pallet of 4½’ cluster studs as lotted

161   2 – 4¼’ keyed oil sealing rings

162   2 – 4¼’ hydraulic rams

163   4 – 3' clearing rams

164   2 – heavy duty electric motors as lotted (30kW)

165   A large quantity of crusher spares including; fasteners, springs, valves and pipe fittings

166   3 - 4' main shaft sleeves

167   2 - 5½’ step plates

168   4 - 7' main frame pins

169   2 - 3' std feed plates

170   2 - Marelli motor driven oil pumps

171   3 - 2' head nuts

172   4 - boxed bearings as lotted

173   2 – shuttle valves as lotted
174   20 - various size floating seals for Omnicone

175   8 - 36" gyro disc head rings

176   A 4¼” main shaft sleeve

177   A large quantity of lifting chain, slings and eye bolts as lotted

178   3 - 3' std head nuts & 1 - 4' std head nut

179   A Barmac 6900 rotor

180   Spare lot

181   An ABM 4¼’ sealing ring

182   An ABM 3' sealing ring

183   3 - short head 3' sealing rings

184   A pallet of various chain & 8 ratchets as lotted

185   8 – bottom 3' cluster plates with a quantity of bolts

186   A 5½’ locking collar

187   3 - 2' split nuts

188   A 2' crusher head

189   A 36" gyro disc head

190   A 4' short head

191   2 - 2' pinions

192   An Eccrintric 3' gear with 2 - standard pinions

193   A 36" gyro disc upper thread section with a quantity of various nuts

194   A quantity of Allis 36" spares as lotted and stillage

195   A mobile shot blast cabinet with 6 bags of shot

196   A 5' x 5' platform scales

197   A shrink heat gun with roll of shrink film

198   24 - thermic lances
199   A 110 Volt portable sprayer with gun

200   An Atlas Copco GA II packaged air compressor, serial no: 235581 (1998) with
      Abbott vertical air receiver and inline filter, recorded hours: 3,173

201   An Asquith Powerthrust 6PT-19-72 radial arm drill with T-slot table, serial no:
      36563 (1979)

202   4 - wooden crusher mounting blocks

203   An alloy extension ladder

204   A propane gas bottle trolley with torch

205   A BOC Transarc DC525 stick welding rectifier

206   A Butters 500 mig welding rectifier with wire feed unit

207   A SIP Plasma 120 portable plasma cutter

208   A propane cutting set

209   A Welding Machines 2 axis rotating / tilting welding positioner with pre heat unit,
      serial no: 2097 (1990)

210   A Plymovent 2100 swing type fume extractor

211   An Ehrle HD840 diesel heated pressure washer, serial no: 441120104 (2004)

212   A 4 point lifting sling as lotted

213   A similar lot

214   A Brit 3000kg pallet truck

215   A Wilms VA1621 110 Volt oil space heater

216   A Caterpillar 12 ton capacity 12' reach heavy duty diesel driven forklift truck,
      serial no: 49H240, recorded hours: 7,948 (reserved delivery)

217   A Peugeot Boxer 1.9D panel van, registration no: KN51 HHB (09/01), recorded
      mileage: 57,373, MOT: September 2005, Tax: December 2004

      Yard

218   A 4¼’ standard steel head

219   An Allis 36" head

220   Spare lot
221   Spare lot

222   A 4¼’ short head

223   A 36" gyro disc head

224   A 3' standard bowl liner

225   A similar lot

226   A similar lot

227   A 66" gyro disc liner extension

228   A similar lot

229   A 3' short head bowl liner

230   A similar lot

231   A 4¼’ water seal

232   An Allis 36" head

233   A 4¼’ adjustment ring seal assembly

234   A 2' bowl

235   A short head 4¼’ bowl

236   A 4 ¼’ adjustment cap

237   6 - Pegson 48" gyrosphere hydraulic rams with 1 - pushing ram

238   A pallet of assorted wear plates

239   A 4¼’ feed hopper assembly

240   A similar lot

241   A 3' bowl

242   A similar lot

243   A 2' bowl

244   A 4¼’ feed hopper assembly

245   A 4' bowl (new)
246   A 4¼’ bolt on eccentric gear

247   An Allis 36" bottom shell

248   A 2' bowl

249   A 3' bowl

250   A 4¼’ bowl liner

251   A similar lot

252   A pallet of jaw plates

253   A similar lot

254   A 4¼’ motor crusher pulleys

255   A 36" gyro disc locking collar

256   A pallet of 2 electrical panels

257   An Allis 36" top shell taree arm

258   An Allis 36" feed hopper

259   A 2' bowl

260   A 3' bowl

261   A pallet of Pegson parts

262   A 2' adjustment cap

263   A pallet of Pegson parts

264   A 3' Norberg bowl

265   A 3' Norberg bowl (new)

266   A 5½’ bowl liner

267   A similar lot

268   2 - 3' & 1 - 4¼’ mainframe caps

269   A pallet of Pegson rams

270   A pallet of Allis 36" parts
271   2 - 4¼’ & 1 - 3' feed plates

272   An Allis 36" distribution feed hopper

273   A 5½’ short head bowl liner

274   A similar lot

275   A pallet of 3' adjustment rings, bolts and springs

276   A pallet of machining jigs

277   A pallet of 5½’ crusher pulleys

278   A pallet of Pegson rams

279   A pallet of H45 dust collars

280   An Allis 36" top shell

281   A 900 Omnico concave

282   A similar lot

283   A pallet of 4' bowl liners

284   A pallet of Allis bowl liners

285   An Allis 36" feed hopper

286   A 36" gyro disc adjustment cap

287   A similar lot

288   A feedcone

289   A pallet of assorted bottom plates

290   An Allis 36" bottom shelf

291   A pallet of Norberg hydraulic consoles

292   A pallet of Allis cluster plates

293   A pallet of hydraulic rams for Norberg

294   A pallet of assorted shafts

295   A 4¼’ mainframe liners
296   An Allis radiator

297   An Allis 45" top shelf

298   A pallet of Pegson parts, bottom plates and crusher pulley

299   A 3' bowl

300   A pallet of 4¼’ short head locking collars

301   A pump assembly

302   A 1144 Omnicone concave

303   An Allis 45" bottom shelf

304   A 4' bowl

305   An Allis 36" bottom assembly

306   2 - 3' mainframe caps

307   A pallet of 36" gyro disc parts

308   A pallet of Norberg extraction tools

309   A ram

310   A 3' eccentric tube & 2' nut

311   An Allis bottom shell

312   A 2' countershaft box

313   A 3' adjustment ring

314   A similar lot

315   An Allis 200 top shell

316   An Allis 45" eccentric tube

317   A pallet of Grizzley bars

318   A cage of 1½’ x 4" BSW bolts and nuts

319   A cage of 7' bowl liner plates

320   3 - jaw plates
321   A waste oil tank

322   A similar lot

323   A similar lot

324   A 4½’ bowl liner

325   A Symmonds adjustment cap

326   A 3' head wiper ring

327   A cage of 3' Norberg parts

328   A Pegson countershaft box

329   A Pallet of electrical vibrator and 5½’ knocking spanner

330   A locking cover

331   A pallet of screen parts

332   A 2' adjustment cap

333   A 3' adjustment cap

334   A 48" adjustment cap

335   A 3' giro disc

336   A cage of adjustment springs and plates as lotted

337   A pallet of Norberg parts

338   A 4¼’ locking nut collar and cover

339   A cage of assorted bolts and nuts

340   An Allis superior top shell

341   A Pegson 1200 autocone support bowl

342   A Warman pump

343   A Hazzimag rotor

344   3 - Wilkinson rubber linertex pumps, 2 - sandhopper cyclones, 1 - linertex pump and 1 -
      centrifugal pump as lotted
345   A Wiseman reduction gear box and motor

346   A vibrating feeder

347   An Allis hydraset tank and an Allis lube tank

348   An Allis 36" top shelf with 2 arms

349   A 7' Norberg motor and pulley

350   A 2' Norberg crusher pulley and motor pulley

351   A Siemen 155kW motor

352   An electric motor (all faults)

353   A 155 amp electric motor

354   A 90kW electric motor

355   An ABB 45kW electric motor

356   17 - bays of heavy duty bolted steel parts racking

357   A 4¼’ Norberg mainframe

358   A similar lot

359   A gas bottle cage

360   A 15' site container

361   A 5½’ standard machining jig

362   A 4¼’ Norberg mainframe stand

363   A set of trestles

364   A similar lot

365   A similar lot

366   A pallet of steel plates, steps and scrap steel as lotted

367   A fork lift skip

368   A lifting frame

369   4 - steel stillages
370   A quantity of railway sleepers with a pallet of heavy chocks

371   A 20' ISO shipping container

      Machine Stock

372   A Wilkinson 4’ rotary ball media mill with Radicon drive and control

373   Spare lot

374   A Pegson Telsmith 24" gyrasphere cone crusher

375   A Mogensen model 2036 5 deck vibratory screen box (twin motor) serial no:
      84079, with Mogensen model AF72HD8 vibratory feeder, serial no: 84080

376   A Symons / Norberg skid mounted 24” cone crusher with motor drive (fully
      refurbished)

377   An Unnamed 5’ x 12’ vibratory washing/feed deck comprising: 3 tank wash
      recovery system with 2 section tank, sludge tanks and 2 cyclones

378   A Kue-Ken 80/1077/ 36” x 10” jaw crusher, serial no: 103830 (1960)

379   A Rhewun type WA10/135 x 225/2 5’ x 10’ 2 deck vibratory screen, serial no:
      103830 (1995)

380   A Goodwin 36" x 12" jaw crusher

381   A Skako 70682 250 ton per hour vibratory feeder/hopper, serial no: 374019


382   A Mogensen 1554 5 deck vibratory screen, serial no: 785E, with twin motor


383   A Goodman 36” x 6” frame mounted jaw crusher, serial no: 28116

384   A welded steel hopper with 10m continuous belt conveyor

385   A Kue-Ken 81-1371 36” x 12” jaw crusher, serial no: 1371 (1962) (Note: drive
      missing, 1 jaw removed – all faults)

386   A Parker 900 hydraulic cone crusher mounted on skid with hydraulic power pack
      motor and controls, serial no: H09590

387   An Allis Chalmers / Svedala Arbra model 36 hydrocone crusher, serial no: --, with
      powerpack type 442-3940-90, serial no: 484562-04 (advised refurbished)

388   An Allis Chalmers / Svedala Arbra model H-36-M-C2-29-10 hydrocone crusher,
      serial no: 7842, with power pack type 1442-6950-90, serial no: 580005-03 (advised
      refurbished)
389   An Allis Chalmers / Svedala Arbra type 436-8 hydrocone crusher, serial no: 7110,
      with power pack type 1442-5683-90, serial no: 982600-10 (advised refurbished)


390   An Allis Chalmers / Svedala Arbra type 2000 hydrocone crusher, serial no: --, with
      power pack type 1-442-6606-90, serial no: 2-81638-05

391   A Brown Lennox Kue-Ken 36” x 24” jaw crusher, serial no: 95M 5909

392   Spare lot

393   A Wileman 2m x 4m rotary throughfeed rubber lined barrel washer, serial no: 157

394   A 6’ x 6’ hydraulic dipper arm with FW hydraulic power pack

      End of sale
                            Commission Bid Form
In order to assist potential purchasers who cannot attend the sale, the Auctioneers
(Tallon and Associates) will bid on their behalf providing this Commission Bid Form is
completed correctly and handed to the Auctioneers prior to sale commencement with
the a deposit cheque for the appropriate amount. It is advisable that any lots are
inspected prior to the completion of this form. The Auctioneers will not be liable for
failure to execute any bids.

The Auctioneers: Tallon And Associates
                      5th Floor
                      Byrom House
                      Quay Street
                      Manchester
                      M3 3JD

                      Telephone: 0161 8327000           Fax: 0161 8327004

Please bid on our behalf at the Auction sale for the lots detailed below at or under the
limit marked against them. This request is given with the understanding that 10%
Buyers Premium and VAT @ 17.5% will be levied on the hammer price and will be
charged over and above the limit placed.

SALE: Equiptrade Limited                                 DATE: 26 October 2004

  Lot no:                         Description                            Limit (GBP)
                                                                               £




A deposit cheque is enclosed for £________ being 25% of the estimated amount of
purchase price.

We confirm to abide by all Conditions of Sale and Notice to Purchasers.



Name:                                        Company:

Address:



Telephone:                                   Fax:

Signature:                                   Date: