Wireless PSC programming Programming Steps by isp11018

VIEWS: 7 PAGES: 2

									                                                          PSC Scanner Programming

Wireless PSC programming

    1. Scan the base station ID to verify the two are communicating. A beep will sound
       indicating connectivity.
    2. Scan SET.
    3. Scan Disable all Symbologies.
    4. Scan Enable Code 39, UPC-A, UPC-E, EAN-13, and EAN-8.
    5. Scan END.
    6. Scan Transmit Scanner Configuration to Base Station.

Programming Steps
SET



Disable all Symbologies



Enable Code 39



Enable UPC-A



Enable UPC-E



Enable EAN-13



Enable EAN-8



END



Transmit Scanner Configuration to Base Station



PSC Wireless Scanner Programming V1.0.doc   Page 1 of 2              Last Updated 10/15/2004
                                                          PSC Scanner Programming



Resetting Scanner to Factory Setting

Use only when the scanner will not accept programming. After completing the following
steps, proceed to the programming section.
    1. Scan the base station ID to verify the two are communicating. A beep will sound
        indicating connectivity.
    2. Scan SET.
    3. Scan Return to Factory Setting
    4. Scan END.
    5. Scan Transmit Scanner Configuration to Base Station.
Set



Return to Factory Setting



END



Transmit Scanner Configuration to Base Station




PSC Wireless Scanner Programming V1.0.doc   Page 2 of 2              Last Updated 10/15/2004

								
To top