Docstoc

Shirt Dress

Document Sample
Shirt Dress Powered By Docstoc
					Shirt Dress
Button your shirt fully. Machine a straight stitch from top to bottom of the shirt either side of the buttons. (Make sure you stitch just the front side of the shirt!). Cut off the arms and across the neck from shoulder to shoulder so you are left with a rectangular shaped piece of material. Turn your material inside out and cut down the side seams so you have two identical shaped pieces for the front and back of your shirt dress. To decide how long you want your dress, measure yourself from above your bust (where you want your neckline to be) down to your desired hem. (Remember to take into account the curve of your bust).

How to make a

1

Check this measurement against the length of your shirt material, starting 1 inch down from the top of the material (you need to add this inch so you can fold it down later to hem the neckline). Measure the largest circumference around the curve of your bust. Measure just underneath your bust – around the top of your rib cage

3 4 5

2

The last measurement you need is the circumference of your hips. Mark these points on the material with a horizontal line in

1

2 3 4

5
Sew up the front of your shirt using a running stitch alongside the buttons

continued

>>

continued
Now you need to make three more measurements on yourself ✽The circumference of your bust ✽the circumference just under your bust, ✽the circumference of your hips (measurement chart next page), For the circumference of your bust (the top horizontal line), halve the measurement (e.g. half of a 34 inch bust measurement is 17 inches) and measure that new halved measurement along the horizontal line, making sure it is central. For example, if your halved measurement is 17 inches, measure 8½ inches from the centre point out to both sides).

6

dot-to-dot outline of the dress.

10 11 12

7

Join up the dots with your chalk and draw a parallel line 2 inches out from this initial line on either side for hem allowance. Pin the two pieces together within the lines. Carefully cut out this larger outline. Using a straight stitch, machine sew up either side of the dress half an inch from the edge of the material. To stop these edges fraying use a zigzag stitch to finish (no diagram). Now you are going to elasticate the circumference underneath your bust. With the dress still inside out, pin the outer edges of a ribbon over the horizontal line around the circumference of the dress. Machine a straight stitch along the outer edges of the tape so you are creating a tunnel through

which you are going to thread your elastic.

13

Now to elasticate the neckline of your dress. Fold an inch of the material in on itself and press. To avoid it being baggy around the back you might want to fold it down around the back of the dress and cut off the excess. Machine a straight stitch half an inch from the fold, leaving a small gap at the end so you can again thread elastic through the tunnel you have created (no diagram). To thread elastic through both of these tunnels, tie the end of your elastic to a safety pin and then feed this through the tunnel. Once it is out the other end, pull it to gather the material a little. Knot the elastic to secure it and it wouldn’t hurt to do a few handsewn stitches to hold it in place.

14 15

8&9

Repeat this for the two other measurements (under bust and hips) along the relevant horizontal chalked lines and this should give you a sort of

13 7 8 10 12

9
You can thread anything by putting a safety pin on the end of cord or elastic like on a hoodie

15

Measuring
We all have a different idea as to where our hips and waist are. Here is a definitive guide to measuring yourself. It’s always a good idea to ask a friend to measure you as they will be more accurate and will stop you trying to breathe in!

1 Shoulder to bust curve 2 Armhole to armhole (across both chest and back) 3 Bust (around the body) 4 Neck to waist (front) 5 Waist – the thinnest part of your middle (around the body) 6 Waist to hem (front) 7 Waist to hem (side) 8 Shoulder to waist (front) 9 Hips – the widest part of your middle below the waist (around the body) 10 Inside arm. Keep the arm straight for this measurement

11 Base of neck to outer edge of shoulder 12 Shoulder to waist 13 Nape of neck to waist (back) 14 Shoulder to wrist. Bend the arm for this measurement, run the tape measure from point of shoulder to point of elbow to wrist bone, getting the longest measurement 15 Upper arm. Measure circumference of the widest part of your upper arm 16 Wrist circumference 17 Elbow circumference 18 Waist to hem (back)


				
DOCUMENT INFO
Shared By:
Tags: Shirt, Dress
Stats:
views:106
posted:1/22/2010
language:English
pages:3
Description: Shirt Dress