Mechanical Seal Cartridge Type by ill20582


									                                                                    Mechanical Seal
                                                                     Cartridge Type

!      Sealing shafts to prevent powder leakage
!      Replaces high-maintenance gland packing seals
!      Used on rotary valves, screw conveyors and similar equipment
!      Especially suitable for abrasive materials
!      Essential where minimum downtime is required

The mechanical seal principle is well proven on our range of rotary valves. The seal uses 2
lapped ni-hard rings to create a seal through which product cannot ingress. Elastomeric rings
push these faces together so they can automatically compensate for wear.

Each seal set us mounted onto the flat face of the end cover. Spring forces are factory preset
and do not require any on site adjustment.

These have been used successfully with gypsum, ash, alumina ceramic powder, slate, flint and
other very aggressive materials. When long term maintenance costs and downtime are taken
into consideration, these seals are an extremely cost effective solution to the problem of effective
shafts sealing.

                                                                  Midland Industrial Designers Limited
                                                  Common Lane • Watnall • Nottingham • England • NG16 1HD
                                                             T: (+44)(0)115 9382154 • F: (+44)(0)115 9386315
                                                            E: • W:
                                                    Manufacturers of powder handling equipment since 1962

To top