&
Extruder
Expander
Guide
Welcome to our section on Extruders and Expanders
In this section, you will find comprehensive comparison charts
NOT IN THE GUIDE YET? for current machinery on the market
CLICK HERE to download an application for You will also find suppliers of:
the 2010/11 Extruder & Expander guide. • Expanders
Entry to the guide is 100% FREE • Extruder dies
• Extruders, laboratory
Closing date 16/04/10 • Extruders, single-screw
• Extruders, twin-screw
www.internationalmilling.com
Extruder & Expander Guide
Almex BV
Model
Contvar 300
AL 350
Contvar 150
Contvar 200
Contvar 300
Contvar 350
Contvar 400
AL 400
AL 350
AL 300
AL 200
AL 150
Single screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Twin screw co rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Twin screw counter rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Modular screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
screw diameter 150 200 300 350 400 400 350 300 200 150
oil ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
water/steam ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
heat
✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
heat
electric
1000- 5000- 10000- 30000- 45000- 8000- 6000- 3500- 1000- 500-
capacity throughput rangeKg/hr 6000 10000 30000 45000 80000 15000 8000 6000 3500 1000
liquids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
solids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Extruder & Expander Guide
venting/vacuum ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
154 | International Milling Directory 2009
pressure monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
temperature monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
segmented barrel ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
horizontally split barrel ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
steam preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
through hardened screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
through hardened liner ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
ALMEX
132- 315- 400- 400- 315- 132- 75-
drive power range (Kw) 45-75 75-132 45-75
barrel options
barrel options
315 400 500 500 400 315 132
variable speed drive ✘ ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✔ ✔
single speed drive ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
two speed drive ✘ ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✔ ✔
torque overload protection ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
variable speed cutter ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
start/stop ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
feed rate ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Drive speed
Drive speed
screw speed ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
process temperature ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid feed addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
pressure ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘ ✘ ✘
residence time ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
energy output ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
shear ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Automatic control
moisture
Automatic control
animal feed ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
human food ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Contivar expander avaliable with cone or slide for pressure control. Complete plants for
essential ancillary equipment avaliable aquaculture or petfood. Active disc
Extruder & Expander Guide
Special features avaliable on all models. Extrusion before pelleting or just extrusion in
special features /additional information feed mils. Cold forming extruders. A/C and D/C drive. Expansion in oil mills. Expansion
International Milling Directory 2009 | 155
in feed mills.
Services Key
ST - Training of customers’ staff ST
PP - Pilot plant facility/product developent
AS - After sales operational backup PP
PP - Pilot plant facility/product developent
AS - After sales operational backup
● Optional
● Optional
Extruder & Expander Guide
Almex
Extruder & Expander Guide
Amandus Kahl GmbH & Co KG
Expander Extruder
Model
OER45
OER38
OER30
OER30
OER23
OER15
OER15
OER8
OER8
OEE30
OEE23
OEE23
OEE15
OEE8
OEE8
Single screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Twin screw co rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Twin screw counter rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Modular screw ✔ ✔ ✔ ✔ ✔ ● ✔ ✔ ✔ ●
screw diameter ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
oil ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
water/steam ✔ ✔ ✔ ✔ ✔ ● ✔ ✔ ✔ ●
Heat
electric ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
35000- 20000- 10000- 5000- 1000- 300- 4000- 2000- 1000- 100-
capacity throughput rangeKg/hr 70000 35000 20000 10000 2500 500 6000 3000 1500 300
liquids addition ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
solids addition ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
venting/vacuum ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Extruder & Expander Guide
156 | International Milling Directory 2009
pressure monitoring ✘ ✘ ✘ ✘ ✘ ● ✘ ✘ ✘ ●
temperature monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
segmented barrel ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔ ✘
horizontally split barrel ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
steam preconditioning ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
liquid preconditioning ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
through hardened screw ✘ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔ ●
AMANDUS
through hardened liner ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔ ✘
500-630 250-520 200-315 110-160 45-75 18 315 160 75 18
barrel options
drive power range (Kw)
variable speed drive ✘ ✘ ✘ ✘ ✘ ✘ ● ● ● ●
single speed drive ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
two speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
torque overload protection ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔ ✘
variable speed cutter ✘ ✘ ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✔
start/stop ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Drive speed
feed rate ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
screw speed ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
process temperature ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid feed addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
pressure ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
residence time ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
energy output ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
KAHL
Automatic control
shear ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
moisture ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
animal feed ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
human food ✘ ✘ ✘ ✘ ✘ ✘ ● ● ● ✔
Complete plants for the production of compound feed, fishfeed, petfood & cereals
essential ancillary equipment avaliable for human food.
Extruder & Expander Guide
Extruders type OEE are fitted with hydraulically adjustable die.
special features /additional information
● Optional
Very short die change.
International Milling Directory 2009 | 157
Services Key
ST
ST - Training of customers’ staff
PP - Pilot plant facility/product developent PP
AS - After sales operational backup
PP - Pilot plant facility/product developent AS
AS - After sales operational backup
Extruder & Expander Guide
Extruder & Expander Guide
Amandus Kahl
Extruder & Expander Guide
Anderson International Corp
Model
Cooker 8”
EEC
4-5” EEC
6” EEC
Cooker 8”
EEC
10” EEC
12” EEC
Single screw ✔ ✔ ✔ ✔ ✔
Twin screw co rotating ✘ ✘ ✘ ✘ ✘
Twin screw counter rotating ✘ ✘ ✘ ✘ ✘
Modular screw ✘ ✘ ✘ ✘ ✔
screw diameter 114 152 203 254 305
oil ✘ ✘ ✘ ✘ ✘
water/steam ✔ ✔ ✔ ✔ ✔
heat
heat
electric ✘ ✘ ✘ ✘ ✘
10- 200- 500- 4000-
capacity throughput rangeKg/hr 3600-9100
200 500 4000 9000
liquids addition ✔ ✔ ✔ ✔ ✔
solids addition ✔ ✔ ✔ ✔ ✘
venting/vacuum ✘ ✘ ✘ ✘ ✘
Extruder & Expander Guide
pressure monitoring ✔ ✔ ✔ ✔ ✔
158 | International Milling Directory 2009
temperature monitoring ✔ ✔ ✔ ✔ ✔
segmented barrel ✘ ✘ ✔ ✔ ✔
horizontally split barrel ✘ ✘ ✘ ✘ ✘
steam preconditioning ✘ ✘ ✘ ✘ ✘
liquid preconditioning ✘ ✘ ✘ ✘ ✘
through hardened screw ✔ ✔ ✔ ✔ ✔
ANDERSON
through hardened liner ✔ ✔ ✔ ✔ ✔
37- 112-
drive power range (Kw) 18 37 110-260
barrel options
barrel options
112 373
variable speed drive ✔ ✔ ✔ ✔ ✔
single speed drive ✔ ✔ ✔ ✔ ✔
two speed drive ✘ ✘ ✘ ✘ ✘
torque overload protection ✘ ✘ ✘ ✘ ✘
variable speed cutter ✔ ✔ ✔ ✔ ✔
start/stop ✔ ✔ ✔ ✔ ✔
feed rate ✔ ✔ ✔ ✔ ✔
✔
Drive speed
Drive speed
screw speed ✘ ✘ ✘ ✘
process temperature ✔ ✔ ✔ ✔ ✔
liquid feed addition ✘ ✘ ✘ ✘ ✘
pressure ✔ ✔ ✔ ✔ ✔
residence time ✘ ✘ ✘ ✘ ✘
energy output ✘ ✘ ✘ ✘ ✘
shear ✘ ✘ ✘ ✘ ✘
✔
Automatic control
Automatic control
moisture ✘ ✘ ✘ ✘
animal feed ✔ ✔ ✔ ✔ ✔
human food ✔ ✔ ✔ ✔ ✔
essential ancillary equipment avaliable Complete process line
Extruder & Expander Guide
Patented water & steam injection PID
special features /additional information control for motor/temp control. Also
International Milling Directory 2009 | 159
serve oil industry with additional models.
Services Key
ST
ST - Training of customers’ staff
PP - Pilot plant facility/product developent PP
AS - After sales operational backup
PP - Pilot plant facility/product developent AS
INTERNATIONAL
AS - After sales operational backup
● Optional
● Optional
Anderson International
Extruder & Expander Guide
Extruder & Expander Guide
Extruder & Expander Guide
Andritz Feed & Biofuel A/S
Extruder Expander
Model
EX1250
FEX25
EX617
EX620
EX917
EX920
EX1250
FEX25
FEX34
FEX42
Single screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Twin screw co rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Twin screw counter rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Modular screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
screw diameter 175 210 175 210 250 250 340 420
oil ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘
water/steam ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
heat
electric ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
6500- 5000- 4500- 5000- 15000- 4000- 10000- 30000-
capacity throughput rangeKg/hr 80000 10000 7500 10000 20000 12000 40000 80000
liquids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
solids addition ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
venting/vacuum ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Extruder & Expander Guide
pressure monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
160 | International Milling Directory 2009
temperature monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
segmented barrel ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
horizontally split barrel ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
steam preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid preconditioning ● ● ● ● ● ● ● ●
through hardened screw ● ● ● ● ● ✔ ✔ ✔
ANDRITZ
through hardened liner ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘
200- 250- 250- 315- 90- 132- 132-
drive power range (Kw) 250
barrel options
250 315 315 630 200 355 355
variable speed drive ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘
single speed drive ✘ ✘ ✘ ✘ ✘ ✔ ✔ ✔
two speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
torque overload protection ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
variable speed cutter ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘
start/stop ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
feed rate ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘
✔ ✔ ✔ ✔ ✔
Drive speed
screw speed ✘ ✘ ✘
process temperature ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid feed addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
pressure ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
residence time ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘
energy output ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
shear ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘
Automatic control
moisture ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
animal feed ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
human food ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
essential ancillary equipment avaliable Complete extrusion process lines.
Extruder & Expander Guide
International Milling Directory 2009 | 161
special features /additional information PIC controller, monitors, printers. Expansion control unit.
Services Key
ST
ST - Training of customers’ staff
PP - Pilot plant facility/product developent PP
AS - After sales operational backup
PP - Pilot plant facility/product developent AS
AS - After sales operational backup
FEED & BIOFUEL
● Optional
Andritz Feed & Biofuel
Extruder & Expander Guide
Extruder & Expander Guide
Extruder & Expander Guide
Baker Perkins Group Inc
Model
MPF 19
MPF 19
MPF 24
MPF 160
MPF 160
SBX 65
SBX 80
SBX 100
SBX 100
BPF200
MPF 125
MPF 125
GLS 40
GLS 50
Single screw ✘ ✘ ✘ ✘ ✘ ✘ ✔ ✘ ✘ ✘
Twin screw co rotating ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Twin screw counter rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Modular screw ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔
screw diameter 19 24 160 65 80 100 ✘ 125 40 50
oil ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
water/steam ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
heat
heat
electric ✘
12- 3200- 300- 600- 1200- 1800 - 30 - 160 -
capacity throughput rangeKg/hr 6 - 20 1000
40 12000 1100 2200 4400 6600 280 560
liquids addition ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔
solids addition ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔
venting/vacuum ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔
Extruder & Expander Guide
pressure monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
162 | International Milling Directory 2009
temperature monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
segmented barrel ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔
horizontally split barrel ✔ ✔ ✔ ✘ ✘ ✘ ✘ ✔ ✔ ✔
steam preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔
liquid preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
BAKER
through hardened screw
through hardened liner ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
drive power range (Kw) 2 5.5 600 105 200 300 30 350 27 42
barrel options
barrel options
variable speed drive ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
single speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
two speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
torque overload protection ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
variable speed cutter ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
start/stop ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
feed rate ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Drive speed
Drive speed
screw speed
process temperature ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔
liquid feed addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
pressure ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔
residence time ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔
energy output ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔
shear ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Automatic control
Automatic control
moisture ✘
animal feed ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔
human food ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ ✔
Solids feeders, liquids feeders, dies, cutters, flaking, shredding, drying,
essential ancillary equipment avaliable mixing, toasting, flavour drum, turnkey plant
Extruder & Expander Guide
International Milling Directory 2009 | 163
special features /additional information Option of bimetallic wear coating for barrels
PERKINS
Services Key
ST - Training of customers’ staff
PP - Pilot plant facility/product developent
AS - After sales operational backup
PP - Pilot plant facility/product developent
AS - After sales operational backup
● Optional
● Optional
Extruder & Expander Guide
Extruder & Expander Guide
Baker Perkins Group
Extruder & Expander Guide
Brabender GmbH & Co KG
Model
Stand Alone
19/25
LAB MODEL
19/20
Stand Alone
DSE 20/40D
Stand Alone
19/25
LAB MODEL
19/20
DSE 25
LAB-MODEL
30/25
Stand Alone
DSE 20/40D
Single screw ✔ ✔ ✘ ✔ ✘
Twin screw co rotating ✘ ✘ ✔ ✘ ✔
Twin screw counter rotating ✘ ✔ ✔ ✘
Modular screw ✘ ✘ ✔ ✘ ✔
screw diameter 19 19 25 30 20
oil ✘ ✘ ✘ ✘ ✘
water/steam ✔ ✔ ✔ ✔ ✔
heat
✔ ✔ ✔ ✔ ✔
heat
electric
capacity throughput rangeKg/hr 5 5 20 10 20
liquids addition ✘ ✘ ✔ ✘ ✔
solids addition ✘ ✘ ✔ ✘ ✔
Extruder & Expander Guide
venting/vacuum ✘ ✘ ✔ ✘ ✔
164 | International Milling Directory 2009
pressure monitoring ✔ ✔ ✔ ✔ ✔
temperature monitoring ✔ ✔ ✔ ✔ ✔
segmented barrel ✘ ✘ ✔ ✘ ✔
horizontally split barrel ✘ ✘ ✘ ✘ ✔
steam preconditioning ✘ ✘ ✘ ✘ ✔
liquid preconditioning ✘ ✘ ✘ ✘ ✘
through hardened screw ✔ ✔ ✔ ✔ ✔
through hardened liner ✘ ✘ ✔ ✘ ✔
BRABENDER
barrel options
barrel options
drive power range (Kw) 1.5 3.3 16 7.5 12
variable speed drive ✔ ✔ ✔ ✔ ✔
single speed drive ✘ ✘ ✘ ✘ ✘
two speed drive ✘ ✘ ✘ ✘ ✘
torque overload protection ✔ ✔ ✔ ✔ ✔
variable speed cutter ✔ ✔ ✔ ✔ ✔
start/stop ✔ ✔ ✔ ✔ ✔
feed rate ✔ ✔ ✔ ✔ ✔
Drive speed
✔ ✔ ✔ ✔ ✔
Drive speed
screw speed
process temperature ✔ ✔ ✔ ✔ ✔
liquid feed addition ✘ ✘ ✔ ✔ ✔
pressure ✔ ✔ ✔ ✔ ✔
residence time ✘ ✘ ✘ ✘ ✘
energy output ✔ ✔ ✔ ✘ ✘
shear ✔ ✔ ✔ ✘ ✘
Automatic control
Automatic control
moisture ✘ ✘ ✘ ✘ ✘
animal feed ✔ ✔ ✔ ✔ ✔
human food ✔ ✔ ✔ ✔ ✔
Prehumidifying, loss in weight control 2nd & 3rd
essential ancillary equipment avaliable component feed.
Extruder & Expander Guide
special features /additional information
International Milling Directory 2009 | 165
ST
Services Key
PP
ST - Training of customers’ staff
PP - Pilot plant facility/product developent
AS
AS - After sales operational backup
PP - Pilot plant facility/product developent
AS - After sales operational backup
● Optional
● Optional
Extruder & Expander Guide
Brabender
Extruder & Expander Guide
Buhler Extrusion Systems
Model
BCTM-30
BCTM-30
BCTL-42
BCTG-62
BCTG-62
BCTF-93
BCTH-125
BCTH-125
BCTJ-175
BCTH-125
BCTH-125
ECOtwin
BCTJ-175
ECOtwin
ECOtwin
BCXA-185
BCXO-210
Single screw ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✔ ✔
Twin screw co rotating ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘
Twin screw counter rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Modular screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘
screw diameter 30 42 62 93 125 175 125 175 185 210
oil ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘
water/steam ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✔ ✔
✔ ✔ ✔ ✔ ✔
heat
heat
electric ✘ ✘ ✘ ✘ ✘
10- 50- 100- 400- 600- 10000- 600- 10000- 800-
capacity throughput rangeKg/hr 1500-2000
100 400 1200 3000 10000 20000 10000 20000 1000
liquids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
solids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
venting/vacuum ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Extruder & Expander Guide
pressure monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
166 | International Milling Directory 2009
temperature monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
segmented barrel ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘
horizontally split barrel ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
steam preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
through hardened screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘
BUHLER
through hardened liner ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
drive power range (Kw) -30 -110 -200 -630 -710 -900 -450 -900 -56 -75
barrel options
barrel options
variable speed drive ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
single speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
two speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
torque overload protection ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
variable speed cutter ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ●
start/stop ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
feed rate ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
screw speed -1200 -1800 -1000 -1000 -800 -600 -800 -600 ✔ ✔
Drive speed
Drive speed
process temperature ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid feed addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
pressure ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
residence time ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
energy output ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
shear ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘
Automatic control
Automatic control
moisture ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
animal feed ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
human food ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✔ ✔
Ancillary equipment for coextrusion, bicolourextrusion, density: Full range of up and
downstream equipmentfor cleaning, size reduction, mixing, screening, metering,
essential ancillary equipment avaliable preconditioning, batchcooking, forming, prehydrating, flaking, drying, toasting,
Extruder & Expander Guide
coating, cooling, material handeling: Complete plant, plant automatisation
International Milling Directory 2009 | 167
Screw push out device, movable cutter,
Lab Patented forming
special features /additional information modularextrusion platform for the widest range
equipment & cutting head
of applications, fully parameterized PLC control
Services Key
ST
ST - Training of customers’ staff
PP - Pilot plant facility/product developent AS
AS - After sales operational backup
PP - Pilot plant facility/product developent PP
● Optional
● Optional
EXTRUSION SYSTEMS
AS - After sales operational backup
Buhler Extrusion Systems
Extruder & Expander Guide
Extruder & Expander Guide
Buhler Extrusion Systems
Extruder & Expander Guide Extruder & Expander Guide
Buhler Extrusion Systems: Profile
With its extrusion technology, By applying a high degree of modularity, Buhler is in a position to provide the optimal
PROFILE
extruder configuration at reasonable cost and within a short time to suit specific
applications. Easy cleaning and accessibility of all critical zones ensure excellent
Buhler masters the processes sanitation.
The Buhler extruder family covers the entire capacity range, from laboratory scale to
for continuous processing high capacity production machines, the entire torque and shear range from low
shear pasta formers to high shear cereal and snack extruders. The process configu-
of starch and protein containing ration of the machine is carefully matched to the specific application.
The basic modules in various versions allow an almost unlimited number of combina-
raw materials. tions and lengths. Reliability and a long service life are achieved on the basis.
Not least, easy operation of the machine also contributes to product reliability. The
control system gives consideration to this important aspect. The local control panel
featuring all the essential operating functions is fitted to the machine. Compliance
with international standards and the modular design enable the system to be easily
incorporated in a process control system. The control system regulates the feed of
up to ten different independent ingredients and can cool or heat up to ten barrel
sections on the basis of the specific requirements.
The screw shafts of the Buhler twin-screw extruders’ serie can be ejected at the
front end at the push of a button. The high forces available can easily and quickly
eject even badly jammed screws.
As a leading system provider with a century old history, Buhler can apply its vast
experience in the production and handling of the raw materials to such tasks. Buhler
stands not only for machines and plants. Buhler provides processes, Buhler pro-
Extruder & Expander Guide
vides solutions and Buhler provides the solution behind the solution.
Extruder & Expander Guide
Bühler AG
Pasta & Extruded Products
CH-9240 Uzwil, Switzerland
T +41 71 955 11 11
extrusion@buhlergroup.com
www.buhlergroup.com
168 | International Milling Directory 2009 International Milling Directory 2009 | 169
Extruder & Expander Guide
Clextral
Model
BC21
BC21
BC45
BC72
BC 92
BC 160
Evolum
HT32
HT32
Evolum
Evolum
HT53
HT53
Evolum
Evolum
HT68
HT68
Evolum
Evolum
HT88
HT88
Evolum
Evolum
LT145
LT145
Evolum
LT187
LT187
Single screw ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Twin screw co rotating ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Twin screw counter rotating ✔ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Modular screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
screw diameter 25 55.5 88 115 200 32 53 68 88 145 187
oil ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘ ✘ ✘ ✘
water/steam ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
heat
electric ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
50- 200- 500- 4000- 100- 250- 500- 500- 1000-
capacity throughput rangeKg/hr 5-100 5- 60
700 3000 6000 16000 300 2000 4500 15000 30000
liquids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
solids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
venting/vacuum ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Extruder & Expander Guide
170 | International Milling Directory 2009
pressure monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
temperature monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
segmented barrel ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
horizontally split barrel ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
steam preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
through hardened screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
CLEXTRAL
through hardened liner ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
15- 48- 98- 416- 195- 300- 600-
drive power range (Kw) 2.2-9 10- 50 43-227 92-482
barrel options
66 226 453 2060 1025 650 1300
variable speed drive ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
single speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
two speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
torque overload protection ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
variable speed cutter ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
start/stop ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
feed rate ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ 1200 1200 1200 1200 1200 1200
Drive speed
screw speed
process temperature ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid feed addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
up to up to up to up to up to up to
pressure ✔ ✔ ✔ ✔ ✔
275 275 275 275 125 125
residence time ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
energy output ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
shear ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Automatic control
moisture
animal feed ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
human food ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
essential ancillary equipment avaliable Complete plants, feeders, cutters, dryers coating, packaging
Extruder & Expander Guide
International Milling Directory 2009 | 171
Modular barrels, automatichydraulic barrel opening (patented), double temperature
special features /additional information regulating system (heating & cooling). Advance PLC control (FITSYS+EVOLUM)
Services Key
ST
ST - Training of customers’ staff
PP - Pilot plant facility/product developent PP (2 in France)
AS - After sales operational backup
PP - Pilot plant facility/product developent AS
AS - After sales operational backup
● Optional
Extruder & Expander Guide
Extruder & Expander Guide
Clextral
Extruder & Expander Guide
La Meccanica
(Condex UK Ltd)
Lamec
305 STHT
Model
Lamec
305 STHT
Processor
Lamec
230 STHT
Processor
Single screw ✔ ✔
Twin screw co rotating ✘ ✘
Twin screw counter rotating ✘ ✘
Modular screw ✘ ✘
screw diameter 305 230
oil ✘ ✘
water/steam ✔ ✔
heat
electric ✘ ✘
15000- 6000-
capacity throughput rangeKg/hr 20000 10000
liquids addition ✔ ✔
solids addition ✘ ✘
venting/vacuum ✘ ✘
Extruder & Expander Guide
172 | International Milling Directory 2009
pressure monitoring ✘ ✘
temperature monitoring ✔ ✔
segmented barrel ✔ ✔
horizontally split barrel ✘ ✘
steam preconditioning ✔ ✔
liquid preconditioning ✔ ✔
through hardened screw ✔ ✔
through hardened liner ✘ ✘
LA MECCANICA
drive power range (Kw) 200 132
barrel options
variable speed drive ✘ ✘
single speed drive ✔ ✔
two speed drive ✘ ✘
torque overload protection ✔ ✔
variable speed cutter ✔ ✔
start/stop ✔ ✔
feed rate ✔ ✔
✘ ✘
Drive speed
screw speed
process temperature ✔ ✔
liquid feed addition ✔ ✔
pressure ✘ ✘
residence time ✘ ✘
energy output ✔ ✔
shear ✔ ✔
Automatic control
moisture ✘ ✘
animal feed ✔ ✔
human food ✘ ✘
essential ancillary equipment avaliable
Extruder & Expander Guide
International Milling Directory 2009 | 173
special features /additional information
Services Key
(CONDEX UK)
ST - Training of customers’ staff
PP - Pilot plant facility/product developent
AS - After sales operational backup
PP - Pilot plant facility/product developent
AS - After sales operational backup
● Optional
Extruder & Expander Guide
Condex UK
Extruder & Expander Guide
Coperion GmbH
Model
ZSK 18 MEGAlab
ZSK 26 Mc
ZSK 34 Mv PLUS
ZSK 43 Mv PLUS
ZSK 43 Mv PLUS
ZSK 54 Mv PLUS
ZSK 54 Mv PLUS
ZSK 62 Mv PLUS
ZSK 76 Mv PLUS
ZSK 98 Mv PLUS
ZSK 125 Mv PLUS
ZSK 32 Mc PLUS
ZSK 40 Mc PLUS
ZSK 50 Mc PLUS
ZSK 58 Mc PLUS
ZSK 70 Mc PLUS
ZSK 70 Mc PLUS
ZSK 92 Mc PLUS
ZSK 92 Mc PLUS
ZSK 119 Mc PLUS
ZSK 133 Mc PLUS
ZSK 177 Mc
ZSK 177 Mc
Single screw ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Twin screw co rotating ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Twin screw counter rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Modular screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
screw diameter 18 26 34 43 54 62 76 98 125 32 40 50 58 70 92 119 133 177
oil ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
water/steam ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
heat
electric
50- 100- 200- 350- 500- 800- 1000- 10- 50- 200- 400- 600- 800- 1000-
capacity throughput rangeKg/hr 1-30 5-100 5-200 40-950
750 1500 2200 3700 6000 9000 15000 450 1500 2500 5000 10000 14000 20000
liquids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
solids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
venting/vacuum ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Extruder & Expander Guide
pressure monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
174 | International Milling Directory 2009
temperature monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
segmented barrel ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
horizontally split barrel ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
steam preconditioning ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
liquid preconditioning ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
through hardened screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
COPERION
through hardened liner ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
drive power range (Kw) 10 28 81 168 321 494 901 1651 3431 65 135 259 396 720 1319 2727 3980 4233
barrel options
variable speed drive ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
single speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
two speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
torque overload protection ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
variable speed cutter ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
start/stop ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
feed rate ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
screw speed 1200 1200 1800 1800 1800 1800 1800 1500 1500 1200 1200 1200 1200 1200 1000 1000 1000 550
Drive speed
process temperature ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid feed addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
pressure ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
residence time ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
energy output ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
shear ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Automatic control
moisture ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
animal feed ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
human food ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
essential ancillary equipment avaliable complete plants
Extruder & Expander Guide
International Milling Directory 2009 | 175
special features /additional information direct steam injection, twin screw vent port stuffer, side feeder, start-up and throttle valves
Services Key
ST - Training of customers’ staff
PP - Pilot plant facility/product developent
AS - After sales operational backup
PP - Pilot plant facility/product developent
AS - After sales operational backup
● Optional
Extruder & Expander Guide
Extruder & Expander Guide
Coperion
Extruder & Expander Guide
EEC-Eder Extrusion
Gmbh
Titan 35
Titan 45
Titan 58
Titan 68
Titan 68
Titan 80
Titan 80
Titan 92
Model
Single screw ✘ ✘ ✘ ✘ ✘ ✘
Twin screw co rotating ✘ ✘ ✘ ✘ ✘ ✘
Twin screw counter rotating ✔ ✔ ✔ ✔ ✔ ✔
Modular screw ✘ ✘ ✘ ✘ ✘ ✘
screw diameter 35 45 58 68 80 92
oil ✔ ✔ ✔ ✔ ✔ ✔
water/steam ✘ ✘ ✘ ✘ ✘ ✘
heat
electric ✔ ✔ ✔ ✔ ✔ ✔
80- 120- 250- 400-
capacity throughput rangeKg/hr 30-90 50-210
420 600 1000 1500
liquids addition ✔ ✔ ✔ ✔ ✔ ✔
solids addition ✘ ✘ ✘ ✘ ✘ ✘
venting/vacuum ✔ ✔ ✔ ✔ ✔ ✔
Extruder & Expander Guide
pressure monitoring ✔ ✔ ✔ ✔ ✔ ✔
176 | International Milling Directory 2009
temperature monitoring ✔ ✔ ✔ ✔ ✔ ✔
segmented barrel ✔ ✔ ✔ ✔ ✔ ✔
horizontally split barrel ✘ ✘ ✘ ✘ ✘ ✘
steam preconditioning ✘ ✘ ✘ ✘ ✘ ✘
liquid preconditioning ✘ ✘ ✘ ✘ ✘ ✘
through hardened screw ✘ ✘ ✘ ✘ ✘ ✘
EEC-EDER
through hardened liner ✘ ✘ ✘ ✘ ✘ ✘
40- 50- 90-
drive power range (Kw) 9,-20 15-30 30-72
barrel options
100 150 200
variable speed drive ✔ ✔ ✔ ✔ ✔ ✔
single speed drive ✘ ✘ ✘ ✘ ✘ ✘
two speed drive ✘ ✘ ✘ ✘ ✘ ✘
torque overload protection ✔ ✔ ✔ ✔ ✔ ✔
variable speed cutter ✔ ✔ ✔ ✔ ✔ ✔
start/stop ✔ ✔ ✔ ✔ ✔ ✔
feed rate ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔
Drive speed
screw speed
process temperature ✔ ✔ ✔ ✔ ✔ ✔
liquid feed addition ✔ ✔ ✔ ✔ ✔ ✔
pressure ✔ ✔ ✔ ✔ ✔ ✔
residence time ✘ ✘ ✘ ✘ ✘ ✘
energy output ✔ ✔ ✔ ✔ ✔ ✔
shear ✘ ✘ ✘ ✘ ✘ ✘
Automatic control
moisture ✘ ✘ ✘ ✘ ✘ ✘
animal feed ✔ ✔ ✔ ✔ ✔ ✔
human food ✔ ✔ ✔ ✔ ✔ ✔
Extruder & Expander Guide
Up and downstream equipment.
essential ancillary equipment avaliable
International Milling Directory 2009 | 177
Conical screws, screw diameter at the
output. Heat and coolable screws. Screws
special features /additional information can be dismantled to the rear, barrel
airpower cooled
Services Key ST
ST - Training of customers’ staff PP
PP - Pilot plant facility/product developent
AS - After sales operational backup
EXTRUSION
PP - Pilot plant facility/product developent
● Optional
AS - After sales operational backup
Extruder & Expander Guide
Extruder & Expander Guide
EEC-Eder Extrusion
Extruder & Expander Guide
Fudex Group Srl Extru-Tech Inc
Model Model
E-325
E-525
E-750
E-925
2FB 60
2FB 90
2FB 105
Single screw ✔ ✔ ✔ ✔
Single screw ✘ ✘ ✘
Twin screw co rotating ✘ ✘ ✘ ✘
Twin screw co rotating ✔ ✔ ✔
Twin screw counter rotating ✘ ✘ ✘ ✘
Twin screw counter rotating ✘ ✘ ✘
Modular screw ✔ ✔ ✔ ✔
Modular screw ✔ ✔ ✔
screw diameter 83 133 191 235
screw diameter 60 90 105
✔ ✔ ✔
oil ✘ ✘ ✘ ✘
oil
water/steam ✔ ✔ ✔ ✔
water/steam ✔ ✔ ✔
heat
electric ● ✘ ✘ ✘
heat
heat
electric ✔ ✔ ✔
50- 100- 1000- 3000-
60- 150- 500- capacity throughput rangeKg/hr
capacity throughput rangeKg/hr 360 1800 7250 13000
150 600 1000
✔ ✔ ✔ liquids addition ✔ ✔ ✔ ✔
liquids addition
solids addition ✔ ✔ ✔ solids addition ✘ ✘ ✘ ✘
✔ ✔ ✔ ✔
Extruder & Expander Guide
venting/vacuum ✔ ✔ ✔ venting/vacuum
178 | International Milling Directory 2009
pressure monitoring ✔ ✔ ✔ pressure monitoring ● ● ● ●
temperature monitoring ✔ ✔ ✔ ✔
temperature monitoring ✔ ✔ ✔
segmented barrel ✔ ✔ ✔ ✔
segmented barrel ✔ ✔ ✔
horizontally split barrel ✔ ✔ ✔
horizontally split barrel ✘ ✘ ✘ ✘
steam preconditioning ✔ ✔ ✔ ✔
steam preconditioning ✘ ✘ ✘
liquid preconditioning ✔ ✔ ✔ ✔
liquid preconditioning ✘ ✘ ✘
through hardened screw ✔ ✔ ✔ ✔
through hardened screw ✔ ✔ ✔
through hardened liner ✘ ✘ ✔ ✔
FUDEX
EXTRU-TECH
through hardened liner ✔ ✔ ✔
112- 150-
drive power range (Kw) 22 56-93
barrel options
barrel options
barrel options
drive power range (Kw) 32 100 300 225 450
variable speed drive ✔ ✔ ✔ variable speed drive ● ● ● ●
single speed drive ✘ ✘ ✘ single speed drive ✔ ✔ ✔ ✔
two speed drive ✘ ✘ ✘ two speed drive ✘ ✘ ✔ ✔
torque overload protection ✔ ✔ ✔ torque overload protection ✔ ✔ ✔ ✔
variable speed cutter ✔ ✔ ✔ variable speed cutter ✔ ✔ ✔ ✔
start/stop ✔ ✔ ✔ start/stop ✔ ✔ ✔ ✔
feed rate ✔ ✔ ✔ feed rate ✔ ✔ ✔ ✔
Drive speed
Drive speed
✔ ✔ ✔
Drive speed
screw speed screw speed ✔ ✔ ✔ ✔
process temperature ✔ ✔ ✔ process temperature ✔ ✔ ✔ ✔
liquid feed addition ✔ ✔ ✔ liquid feed addition ✔ ✔ ✔ ✔
pressure ✔ ✔ ✔ pressure ✘ ✘ ✘ ✘
residence time ● ● ● residence time ✘ ✘ ✘ ✘
energy output ● ● ● energy output ✘ ✘ ✘ ✘
shear ● ● ● shear ✘ ✘ ✘ ✘
Automatic control
Automatic control
Automatic control
moisture ● ● ● moisture ✘ ✘ ✘ ✘
animal feed ✔ ✔ ✔ animal feed ✔ ✔ ✔ ✔
human food ✔ ✔ ✔ human food ✔ ✔ ✔ ✔
essential ancillary equipment Complete line Pneumatic conveying systems,
essential ancillary equipment dryers, coolers, material
avaliable from sil application systems, forming/
avaliable densification equipment
Extruder & Expander Guide
Continuos
special features /additional
production plant
International Milling Directory 2009 | 179
information Automatic process control.
in demonstration. special features /additional Data acquisition.
Services Key information
ST - Training of customers’ staff ST ST
Services Key
PP - Pilot plant facility/product
developent PP PP
ST - Training of customers’ staff
AS - After sales operational backup PP - Pilot plant facility/product
PP - Pilot plant facility/product AS AS
developent
developent AS - After sales operational backup
● Optional
● Optional
AS - After sales operational backup PP - Pilot plant facility/product
developent
● Optional
AS - After sales operational backup
Extruder & Expander Guide
Extruder & Expander Guide
Fudex Extru-Tech Inc
Extruder & Expander Guide
Extruder & Expander Guide
Insta Pro Europe
Model
2594
2500
2094
2000R
600
9800
9694
9600
2594
2500
2094
2000R
600
9800
9694
9600
Single screw
Single screw ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
Twin screw co rotating
Twin screw co rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Twin screw counter rotating
Twin screw counter rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Modular screw
Modular screw ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
screw diameter
screw diameter ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
oil
oil ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
water/steam
water/steam ✔
✔ ✘ ✔
✔ ✘ ✘ ✘ ✔
✔ ✘
heat
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
heat
electric
electric ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
1100-
1100- 650-
650- 260-
260-
capacity throughput rangeKg/hr
capacity throughput rangeKg/hr 2000+
2000+ 1300+
1300+ 4000+
4000+ 6300+
6300+ 3000+
3000+
1500
1500 1000
1000 400
400
liquids addition
liquids addition ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
solids addition
solids addition ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Extruder & Expander Guide
Extruder & Expander Guide
venting/vacuum
venting/vacuum ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
180 | International Milling Directory 2009
180 | International Milling Directory 2009
pressure monitoring
pressure monitoring ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
temperature monitoring
temperature monitoring ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
segmented barrel
segmented barrel ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✘ ✘
horizontally split barrel
horizontally split barrel ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
steam preconditioning
steam preconditioning ✔
✔ ✔
✔ ✘ ✔
✔ ✘ ✘ ✔
✔ ✘
liquid preconditioning
liquid preconditioning ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
through hardened screw
through hardened screw ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
INSTA-PRO
through hardened liner
through hardened liner ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
barrel options
90 90 55 55 37 250 250 250
barrel options
drive power range (Kw)
drive power range (Kw) 90 90 55 55 37 250 250 250
variable speed drive
variable speed drive ● ● ● ● ● ● ● ●
single speed drive
single speed drive ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
two speed drive
two speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
torque overload protection
torque overload protection ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
variable speed cutter
variable speed cutter ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
start/stop
start/stop ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
feed rate
feed rate ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
Drive speed
screw speed ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Drive speed
screw speed
process temperature
process temperature ● ● ● ● ● ● ● ●
liquid feed addition
liquid feed addition ● ● ● ● ● ● ● ●
pressure
pressure ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
residence time
residence time ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
energy output
energy output ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
shear
shear ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Automatic control
moisture ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Automatic control
moisture
animal feed
animal feed ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
human food
human food ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✘ ✔
✔
essential ancillary equipment avaliable Complete process lines
essential ancillary equipment avaliable Complete process lines
Extruder & Expander Guide
Extruder & Expander Guide
special features /additional information World wide service equipment and nutrition
special features /additional information World wide service equipment and nutrition
International Milling Directory 2009 | 181
International Milling Directory 2009 | 181
Services Key
Services Key
ST
ST
ST - Training of customers’ staff
ST - Training of customers’ staff
PP - Pilot plant facility/product developent
PP - Pilot plant facility/product developent PP
PP
AS - After sales operational backup
AS - After sales operational backup
PP - Pilot plant facility/product developent
PP - Pilot plant facility/product developent AS
AS
● Optional
AS - After sales operational backup
● Optional
AS - After sales operational backup
Extruder & Expander Guide
Extruder & Expander Guide Insta-Pro Europe
Extruder & Expander Guide
Müench-
Edelstahl GmbH
All
Models
Model
Single screw ✔
Twin screw co rotating ✘
Twin screw counter rotating ✘
Modular screw ✘
135-
screw diameter 230
oil ✔
water/steam ✔
heat
electric ✘
capacity throughput
0.5-6
rangeKg/hr
liquids addition ✔
✘
Extruder & Expander Guide
solids addition
182 | International Milling Directory 2009
venting/vacuum ✘
pressure monitoring ✔
temperature monitoring ✔
segmented barrel ✔
horizontally split barrel ✘
steam preconditioning ✔
liquid preconditioning ✘
✔
MÜENCH
through hardened screw
through hardened liner ✔
barrel options
drive power range (Kw) 55-250
variable speed drive ✘
single speed drive ✔
two speed drive ✔
torque overload protection ✔
variable speed cutter ✔
start/stop ✔
feed rate 0-140
Drive speed
screw speed ✔
process temperature ✔
liquid feed addition ✘
pressure ✔
residence time ✔
energy output ✘
shear ✘
Automatic control
moisture ✔
animal feed ✔
human food ✘
essential ancillary equipment
avaliable
Extruder & Expander Guide
special features /additional
International Milling Directory 2009 | 183
information
Services Key
ST - Training of customers’ staff
PP - Pilot plant facility/product
developent
AS - After sales operational
backup
PP - Pilot plant facility/product
EDELSTAHL
developent
AS - After sales operational
● Optional
backup
Extruder & Expander Guide
Extruder & Expander Guide
Müench-Edelstahl
Extruder & Expander Guide
Pavan Group
Model
G55
G70
G70
G90
G115
G130
G160
G180
G200
F55
F70
F70
F90
F90
F100
F100
F115
F115
F130
Single screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Twin screw co rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Twin screw counter rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Modular screw ✘ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘ ✘ ✘ ✘
screw diameter 55 70 90 115 130 160 180 200 55 70 90 100 115 130
oil ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
water/steam ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
heat
heat
electric ✘ ✘ ✘ ✘ ✘ ✘
10- 30- 80- 150- 250- 450- 600- 800- 20- 45- 90- 100- 150- 300-
capacity throughput rangeKg/hr 30 60 120 200 350 550 800 1000 40 80 140 200 200 400
liquids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
solids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Extruder & Expander Guide
venting/vacuum ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘ ✘ ✘ ✘
184 | International Milling Directory 2009
pressure monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
temperature monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
segmented barrel ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘ ✘ ✘ ✘
horizontally split barrel ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
steam preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘ ✘ ✘ ✘
liquid preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
through hardened screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
PAVAN
through hardened liner ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘ ✘ ✘ ✘ ✘
barrel options
barrel options
drive power range (Kw) 5 15 18 30 45 75 90 160 4 5.5 15 18 22 30
variable speed drive ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
single speed drive ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
two speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
torque overload protection ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
variable speed cutter ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
start/stop ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
feed rate ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Drive speed
Drive speed
screw speed ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
process temperature ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid feed addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
pressure ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
residence time ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
energy output ✘ ✘ ● ● ● ● ● ● ✘ ✘ ✘ ✘ ✘ ✘
shear ✘ ✘ ● ● ● ● ● ● ✘ ✘ ✘ ✘ ✘ ✘
Automatic control
Automatic control
moisture ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
animal feed ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
human food ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Complete processing line, vacume system, die washingmachines, driers, toasters, changing
essential ancillary equipment avaliable rolls
Extruder & Expander Guide
International Milling Directory 2009 | 185
special features /additional information PLC control, complete line supervision
Services Key
ST
ST - Training of customers’ staff
PP - Pilot plant facility/product developent PP
AS - After sales operational backup
PP - Pilot plant facility/product developent AS
AS - After sales operational backup
● Optional
● Optional
Extruder & Expander Guide
Extruder & Expander Guide
Pavan
Extruder & Expander Guide
Pavan Group
Model
F150
F175
F200
F230
F230
TT50
TT58
TT58
TT70
TT92
TT112
TT112
TT133
TT133
Single screw ✔ ✔ ✔ ✔ ✘ ✘ ✘ ✘ ✘ ✘
Twin screw co rotating ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
Twin screw counter rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Modular screw ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
screw diameter 150 175 200 230 50 58 70 92 112 133
oil ✘ ✘ ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✔
water/steam ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
✔ ✔ ✔
heat
electric ✘ ✘ ✘ ✘ ✘ ✘ ✘
500- 900- 1300- 1600- 100- 200- 500- 600- 1200- 2400-
capacity throughput rangeKg/hr 600 1000 1400 2100 200 400 800 2000 4000 800
liquids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
solids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Extruder & Expander Guide
venting/vacuum ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
186 | International Milling Directory 2009
pressure monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
temperature monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
segmented barrel ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
horizontally split barrel ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✘ ✘ ✘
steam preconditioning ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
liquid preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
through hardened screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
PAVAN
through hardened liner ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
barrel options
drive power range (Kw) 45 75 110 140 55 100 180 325 500 730
variable speed drive ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
single speed drive ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
two speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
torque overload protection ✘ ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✔ ✔
variable speed cutter ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
start/stop ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
feed rate ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Drive speed
screw speed ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
process temperature ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid feed addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
pressure ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
residence time ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
energy output ✘ ✘ ✘ ✘ ● ● ● ● ● ●
shear ✘ ✘ ✘ ✘ ● ● ● ● ● ●
Automatic control
moisture ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
animal feed ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
human food ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Complete processing line, vacume system, die washingmachines, driers,
essential ancillary equipment avaliable toasters, changing rolls
Extruder & Expander Guide
International Milling Directory 2009 | 187
special features /additional information PLC control, complete line supervision
Services Key
ST
ST - Training of customers’ staff
PP - Pilot plant facility/product developent PP
AS - After sales operational backup
PP - Pilot plant facility/product developent AS
AS - After sales operational backup
● Optional
Extruder & Expander Guide
Extruder & Expander Guide
Pavan
Extruder & Expander Guide
Setrem
Extruder Expander
Model
S50
X100
X125
Y200
Y270
Y270
TEC 200
TEC 300
Single screw ✔ ✔ ✔ ✔ ✔ ✔ ✔
Twin screw co rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘
Twin screw counter rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘
Modular screw ✔ ✔ ✔ ✔ ✔ ✔ ✔
screw diameter ✘ ✘ ✘ ✘ ✘ ✘ ✘
oil ✘ ✘ ✘ ✘ ✘ ✘ ✘
water/steam ✔ ✔ ✔ ✔ ✔ ✔ ✔
heat
electric ✘ ✘ ✘ ✘ ✘ ✘ ✘
250- 800- 900- 500- 1500- 2500- 4000-
capacity throughput rangeKg/hr 500 1000 1400 3500 2500 5000 8000
liquids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔
solids addition ✘ ✘ ✘ ✘ ✘ ✘ ✘
✔ ✔ ✔ ✔ ✔ ✔ ✔
Extruder & Expander Guide
venting/vacuum
188 | International Milling Directory 2009
pressure monitoring ✘ ✘ ✘ ✘ ✘ ✘ ✘
temperature monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔
segmented barrel ✔ ✔ ✔ ✔ ✔ ✔ ✔
horizontally split barrel ✘ ✘ ✘ ✘ ✘ ✘ ✘
steam preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✔
through hardened screw ✔ ✔ ✔ ✔ ✔ ✔ ✔
SETREM
through hardened liner ✔ ✔ ✔ ✔ ✔ ✔ ✔
37 75 90 160 200 160 200
barrel options
drive power range (Kw)
variable speed drive ✔ ✔ ✔ ✔ ✔ ✔ ✔
single speed drive ✔ ✔ ✔ ✔ ✔ ✔ ✔
two speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘
torque overload protection ✘ ✘ ✘ ✘ ✘ ✘ ✘
variable speed cutter ✔ ✔ ✔ ✔ ✔ ✔ ✔
start/stop ✔ ✔ ✔ ✔ ✔ ✔ ✔
feed rate ✔ ✔ ✔ ✔ ✔ ✔ ✔
Drive speed
screw speed ✔ ✔ ✔ ✔ ✔ ✔ ✔
process temperature ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid feed addition ✔ ✔ ✔ ✔ ✔ ✔ ✔
pressure ✔ ✔ ✔ ✔ ✔ ✔ ✔
residence time ✘ ✘ ✘ ✘ ✘ ✘ ✘
energy output ✘ ✘ ✘ ✘ ✘ ✘ ✘
shear ✘ ✘ ✘ ✘ ✘ ✘ ✘
Automatic control
moisture ✔ ✔ ✔ ✔ ✔ ✔ ✔
animal feed ✔ ✔ ✔ ✔ ✔ ✔ ✔
human food ✔ ✔ ✔ ✔ ✔ ✔ ✔
Conical Mixer - water pump are conditioner cooler/
essential ancillary equipment avaliable dryer, fat cooler.
Extruder & Expander Guide
International Milling Directory 2009 | 189
special features /additional information
Services Key
ST
ST - Training of customers’ staff
PP - Pilot plant facility/product developent PP
AS - After sales operational backup
PP - Pilot plant facility/product developent AS
AS - After sales operational backup
● Optional
Extruder & Expander Guide
Extruder & Expander Guide
Setrem
Extruder & Expander Guide
Wenger
Model
X-165
X-185
57 MAG ST
115 MAG ST
144 MAG ST
C2TX 16.2
X-115
X-165
X-185
X-235
57 MAG ST
85 MAG ST
115 MAG ST
144 MAG ST
C2TX 8.1
C2TX 16.2
Single Screw ✔ ✔ ✔ ✔ ✘ ✘ ✘ ✘ ✘ ✘
Twin screw co rotating ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
Twin screw counter rotating ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
Modular screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✘
screw diameter 115 165 216 235 57 85 115 144 Conical Conical
oil ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔
water/steam ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
heat
heat
electric ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
100- 1700- 4000- 6000- 50- 200- 500- 1000- 1000- 2500-
capacity throughput rangeKg/hr 1500 6000 13000 20000 500 1600 3000 8000 5000 13000
liquids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
solids addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Extruder & Expander Guide
venting/vacuum ✘ ✘
190 | International Milling Directory 2009
pressure monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
temperature monitoring ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
segmented barrel ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
WENGER
horizontally split barrel ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
steam preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid preconditioning ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
through hardened screw ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
through hardened liner ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
110- 185- 225- 30- 75- 75- 185-
Barrel options
Barrel options
drive power range (Kw) 75 150-450 185-1000
185 400 1000 150 185 400 1000
variable speed drive ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
single speed drive ✔ ✔ ✔ ✔ ✘ ✘ ✘ ✘ ✘ ✘
two speed drive ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘
torque overload protection ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
variablespeed cutter ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
start/stop ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
feed rate ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Drive speed
Drive speed
screw speed ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
process temperature ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
liquid feed addition ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
pressure ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
residence time ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
energy output ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
shear ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Automatic control
Automatic control
moisture ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
animal feed ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
human food ✘ ✘ ✘ ✘ ✔ ✔ ✔ ✔ ✘ ✘
essential ancillary equipment avaliable Dryers, coolers, enrobers, mixers, automated control systems
Extruder & Expander Guide
International Milling Directory 2009 | 191
Includes patented pre-conditioner, screw elements, barrel elements,
special features /additional information barrel venting system, back pressure valve
Services Key
ST
ST - Training of customers’ staff
PP
PP - Pilot plant facility/product developent
AS
● Optional
● Optional
AS - After sales operational backup
Extruder & Expander Guide
Wenger
Extruder
Expander
related listings
Expanders Extruders, twin-screw
Almex BV Baker Perkins Ltd
Amandus Kahl GmbH & Co KG Clextral
Anderson International Corp Clextral Inc
Dinnissen BV EEC-Eder Extrusion GmbH
Jiangsu Muyang Group Co, Ltd Händle GmbH Maschinen und Anlagenbau
Jiangsu Muyang Group Co, Ltd
Extruder dies Wenger Manufacturing Inc
Wenger Overseas Inc
Andritz Feed & Biofuel
Catchpole Peter, Process Milling Engineers
EEC-Eder Extrusion GmbH
Consultants - extrusion technology
Jiangsu Muyang Group Co, Ltd Almex BV
Pavan Group Frisby Extrusion Services Ltd
Extruders, laboratory
Brabender® GmbH & Co KG
Clextral
Clextral Inc
Coperion GmbH
Frisby Extrusion Services Ltd
Extruders, single-screw
Amandus Kahl GmbH & Co KG
Anderson International Corp
Andritz Feed & Biofuel
Catchpole Peter, Process Milling Engineers
Coperion GmbH
Dinnissen BV
Händle GmbH Maschinen und Anlagenbau
Insta-Pro International
Jiangsu Muyang Group Co, Ltd
Sarmaksan
Setrem
Wenger Manufacturing Inc
Wenger Overseas Inc
192 | International Milling Directory 2009