Docstoc

ERA BRITISH STANDARD MORTICE LOCKS

Document Sample
ERA BRITISH STANDARD MORTICE LOCKS Powered By Docstoc
					ERA BRITISH STANDARD MORTICE LOCKS
ERA British Standard Mortice Locks are manufactured to conform to the BSI Specification for Thief Resistant Locks - BS3621:1998. This standard was created by a Standards Committee comprising of representatives from the police, government departments, local authorities, architects, window and door manufacturers and lockmakers. It provides a reference for type-testing and certification of thief resistant locks. Before the standard is awarded to a mechanical key operated lock, designed for fixing to hinged or sliding doors, it has to be passed by an independent panel of locksmith experts. SLOTS TO ACCOMMODATE BOLT THROUGH FURNITURE EASILY REVERSIBLE LATCH (NO NEED TO REMOVE TOP PLATE) Once a lock has been accredited with the BS3621:1998 standard, it is recognised as giving the maximum protection generally available to the majority of both domestic and commercial premises. Many insurance companies recognise this and reduce premiums accordingly, whilst some will provide cover only if such locks are fitted. For a lock to be awarded BS3621:1998 it has to achieve the following criteria; • BOLT HARDENED STEEL ANTI-DRILL PLATES At least 1000 different key patterns (differs) and 999 different locks must be made before any key pattern can be used again. There must be at least 5 moveable levers used. If fewer than 9 levers are fitted there must be additional anti-picking precautions incorporated (such as false notching). If a key can be used on both sides of a door, both sides must offer equal security. Handles and knobs must not operate the bolt when deadlocked. Deadlocking must be effective before the key can be removed. The bolt must project not less than 14mm when locked. Both sides of the lock body must be protected by anti-drilling plates. Vulnerable fixing screws on all parts of the lock, cylinder and staple must be concealed or inoperable when the door is locked.

SPRING

FOREND

•

• HARDENED STEEL ROLLERS • BRASS LEVERS WITH FALSE NOTCHING • • • •

BOLT THROWER

REBATE SETS
For French doors, when a Mortice Deadlock or Sashlock is fitted, a Rebate Set should also be fitted to ensure secure closing. The measurement “A” must be either 1/2”or 1” where opon the appropriate sized rebate set should be used. Rebate Sets are supplied non-handed for use on either left or right handed fitment.

CROSS SECTION OF REBATE DOORS

INWARD OPENING

OUTWARD OPENING

LH
OUTSIDE OUTSIDE

LH

HANDING OF SASHLOCKS
Hinged doors can open in one of four ways and this will determine whether the door is left or right handed. All ERA Mortice Sashlocks are supplied handed left. Instructions are supplied for alteration to right handed fitment.

RH RH
OUTSIDE OUTSIDE

BS INVINCIBLE MORTICE LOCK RANGE
The ERA Invincible Range of British Standard 5 Lever Locks are certified to BS3621:1998 and fully meet insurance company requirements for thief resistance. They are recommended by insurance companies and the police. The Invincible Dead Lock features an in-line arrangement of the bolt, bolt stump and levers when the bolt is in the locked position. This is a continuous and near-impregnable line of metal to resist jemmying. Hardened steel rollers in the bolt resist hacksawing. The Invincible Sash Lock features a latch which can be easily reversed without having to remove the cover. The advanced design of this lock is such that critical dimensions for fixing such as backset and hole centres are similar to existing ordinary sash locks allowing easy replacement with minimum cutting and drilling of doors. The keys, manufactured from manganese bronze, have over 1,000 variations for added security. All levers have false notching to resist lock picking. ERA Invincible Rebate Sets are available in two sizes - 12.7mm (1/2”) and 25.4mm (1”) - with a choice of finishes to match forends. Sash Lock Rebate Sets are non-handed to reduce stock-holding. Full fitting instructions are supplied. BS INVINCIBLE MORTICE DEAD LOCK

ORDERING DETAILS
Dead Lock Brass 64mm (21/2”) Satin 64mm (21/2”) Brass 76mm (3”) Satin 76mm (3”) Sash Lock Brass 64mm (21/2”) Satin 64mm (21/2”) Brass 76mm (3”) Satin 76mm (3”) Spare Keys - Manganese Bronze Cut key Key blank 210-31 210-51 310-31 310-51 508-06 608-06 208-31 208-51 308-31 308-51

Above locks are suitable for sprung furniture only

Dead Lock Rebate Sets for Invincible Locks Brass 12.7mm (1/2”) Rebate 400-31 Satin 12.7mm (1/2”) Rebate 400-51 Brass 25.4mm (1”) Rebate 401-31 Satin 25.4mm (1”) Rebate 401-51 Sash Lock Rebate Sets Brass 12.7mm (1/2”) Rebate BS INVINCIBLE MORTICE SASH LOCK Satin 12.7mm (1/2”) Rebate Brass 25.4mm (1”) Rebate Satin 25.4mm (1”) Rebate 402-31 402-51 404-31 404-51

the above products are also available Clam-Packed 5 Lever Dead Lock 5 Lever Sash Lock

All dimensions in mm. Numbers in brackets relate to 3” version of lock

BS PRO-FIT MORTICE LOCK RANGE
The ERA Pro-Fit Range of British Standard 5 Lever Locks are certified to BS3621:1998 and fully meet insurance company requirements for thief resistance. They are recommended by insurance companies and the police. Both the Pro-Fit Sash Lock and the Pro-Fit Deadlock have hardened steel plates to resist drilling, and hardened steel rollers in the deadbolt to resist hacksawing. The Pro-Fit Sash Lock features a latch which can be easily reversed without having to remove the cover. The keys, manufactured from manganese bronze, have over 1,000 variations for added security. All brass levers have false notching to resist lock picking. ERA Pro-Fit Rebate Sets are available in two sizes - 12.7mm (1/2”) and 25.4mm (1”) - with a choice of finishes to match forends. Sash Lock Rebate Sets are non-handed to reduce stockholding. Full fitting instructions are supplied. BS PRO-FIT MORTICE DEAD LOCK

ORDERING DETAILS
Dead Lock Brass 64mm (21/2”) Satin 64mm (21/2”) Brass 76mm (3”) Satin 76mm (3”) Sash Lock Brass 64mm (21/2”) Satin 64mm (21/2”) Brass 76mm (3”) Satin 76mm (3”) Dead Lock Rebate Sets Brass 12.7mm (1/2”) Rebate Satin 12.7mm (1/2”) Rebate Brass 25.4mm (1”) Rebate Satin 25.4mm (1”) Rebate Sash Lock Rebate Sets Brass 12.7mm (1/2”) Rebate Satin 12.7mm (1/2”) Rebate Brass 25.4mm (1”) Rebate Satin 25.4mm (1”) Rebate Spare Keys Pro-Fit cut key Pro-Fit blank key
5 Lever Dead Lock
37 14 14

220-31 220-51 320-31 320-51

221-31 221-51 321-31 321-51

434-31 434-51 435-31 435-51

436-31 436-51 437-31 437-51 BS PRO-FIT MORTICE SASH LOCK 509-06 609-06
5 Lever Sash Lock

37

44 (56) 65 (77)

44 (56) 18 180 55 57 65 (77) 27

96

87

168

87 134

108 162

40

30

21

19

All dimensions in mm. Numbers in brackets relate to 3” version of lock

BS EURO PRO-FIT MORTICE LOCK RANGE
The ERA British Standard Euro Pro-Fit is certified to BS3621:1998, fully meeting insurance company requirements and recommended by the police. The BS Euro Pro-Fit features a High Security 6 pin Euro Profile Double Cylinder resistant against picking or drill attack. Solid brass bolt through heavy-duty security roses protect the cylinder. The BS Euro Pro-Fit Sash Lock features an easily reversible latch bolt. The deadbolt has hardened steel rollers to resist hacksawing. The BS Euro Pro-Fit is available as either complete with cylinder or as case only (this is not certified to BS3621:1998). ERA BS Euro Pro-Fit Rebate Sets are available in two sizes - 12.7mm (1/2”) and 25.4mm (1”) with a choice of finishes to match forends. Sash Lock Rebate Sets are non-handed to reduce stock holding. Full fitting instructions are supplied.

BS EURO PRO-FIT DEAD LOCK INCLUDING CYLINDER

ORDERING DETAILS
Dead Lock Brass 64mm (21/2”) Satin 64mm (21/2”) Brass 76mm (3”) Satin 76mm (3”) Sash Lock Brass 64mm (21/2”) Satin 64mm (21/2”) Brass 76mm (3”) Satin 76mm (3”) 251-31 251-51 351-31 351-51 259-31 259-51 359-31 359-51

For ‘CASE ONLY’ - please add ‘CASE’ on end of above codes. Note: Does not conform to BS: 3621:1998. Above locks are suitable for sprung furniture only

Dead Lock Rebate Sets Brass 12.7mm (1/2”) Rebate Satin 12.7mm ( /2”) Rebate Brass 25.4mm (1”) Rebate Satin 25.4mm (1”) Rebate Sash Lock Rebate Sets Brass 12.7mm (1/2”) Rebate Satin 12.7mm ( / ”) Rebate
2 1 1

434-31 434-51 435-31 435-51 436-31 436-51 437-31 437-51

BS EURO PRO-FIT SASH LOCK INCLUDING CYLINDER

Brass 25.4mm (1”) Rebate Satin 25.4mm (1”) Rebate

The above products are also available Clam-Packed. Dead Lock Sash Lock Cylinder

96

87

40

19

All dimensions in mm. Numbers in brackets relate to 3” version of lock

HIGH SECURITY FORTRESS MORTICE LOCK
This 5 lever British Standard High Security Mortice Lock to BS3621:2004 standard meets the exacting demands of the insurance companies and the Police. Higher security levels are delivered by a 20mm bolt throw on every lock, and both the Sashlock and Deadlock have hardened steel plates to resist drilling, and four hardened steel rollers in the deadbolt resist hacksawing The Fortress Sashlock features a pull and twist action latch which can easily reverse the hand of the lock without the removal of the lock cover or screws. The keys, manufactured of manganese bronze have 1,000 variations for added security. All steel levers have false notching to resist lock picking. The Fortress Rebates are available in two sizes 12.7mm (1/2”) and 25.4mm (1”) - with a choice of either Brass, Satin or Chrome finishes to match the forends. The Sashlock rebates are non-handed and come complete with full fitting instructions.

ORDERING DETAILS
HIGH SECURITY FORTRESS MORTICE DEADLOCK Deadlock Brass 64mm (2.5”) Satin 64mm (2.5”) Chrome 64mm (2.5”) Brass 76mm (3”) Satin 76mm (3”) Chrome 76mm (3”) Sashlock Brass 64mm (2.5”) Satin 64mm (2.5”) Chrome 64mm (2.5”) Brass 76mm (3”) Satin 76mm (3”) Chrome 76mm (3”) Spare Keys – Cut key Key blank Deadlock Rebates Brass 1/2” Satin 1/2” Chrome 1/2” Brass 1” Satin 1” Chrome 1” Sashlock Rebates Brass 1/2” Satin 1/2” Chrome 1/2” Brass 1” Satin 1” Chrome 1” 261-31 261-51 261-61 361-31 361-51 361-61 262-31 262-51 262-61 362-31 362-51 362-61

All the above products are also available Clam-packed

502-06 602-06 426-31 426-51 426-61 427-31 427-51 427-61 428-31 428-51 428-61 429-31 429-51 429-61

HIGH SECURITY FORTRESS MORTICE SASHLOCK

Deadlock

Sashlock

All dimensions in mm.

HIGH SECURITY FORTRESS EURO CYLINDER LOCK
This British Standard High Security Euro Cylinder Lock to BS3621:2004 standard meets the exacting demands of the insurance companies and the Police. Higher security levels are delivered by a 20mm bolt throw on every lock, and both the Sashlock and Deadlock have hardened steel plates to resist drilling, and four hardened steel rollers in the deadbolt to resist hacksawing. Each lock comes complete with a High Security 6 pin Euro Profile Cylinder resistant against picking or drill attack. Bolt through heavy-duty security roses protect the cylinder. The Fortress Sashlock features a pull and twist action latch which can easily reverse the hand of the lock without the removal of the lock cover or screws. The Fortress Rebates are available in two sizes 12.7mm (1/2”) and 25.4mm (1”) - with a choice of either Brass, Satin or Chrome finishes to match the forends. The Sashlock rebates are non-handed and come complete with full fitting instructions.

ORDERING DETAILS
HIGH SECURITY FORTRESS EURO CYLINDER DEADLOCK Deadlock Brass 64mm (2.5”) Satin 64mm (2.5”) Chrome 64mm (2.5”) Brass 76mm (3”) Satin 76mm (3”) Chrome 76mm (3”) Sashlock Brass 64mm (2.5”) Satin 64mm (2.5”) Chrome 64mm (2.5”) Brass 76mm (3”) Satin 76mm (3”) Chrome 76mm (3”) Deadlock Rebates Brass 1/2” Satin 1/2” Chrome 1/2” Brass 1” Satin 1” Chrome 1” Sashlock Rebates Brass 1/2” Satin 1/2” Chrome 1/2” Brass 1” Satin 1” Chrome 1” 263-31 263-51 263-61 363-31 363-51 363-61 264-31 264-51 264-61 364-31 364-51 364-61

All the above products are also available Clam-packed

426-31 426-51 426-61 427-31 427-51 427-61 428-31 428-51 428-61 429-31 429-51 429-61

HIGH SECURITY FORTRESS EURO CYLINDER SASHLOCK

Deadlock

Sashlock

All dimensions in mm.

HIGH SECURITY FORTRESS OVAL CYLINDER LOCK
This British Standard High Security Oval Cylinder Lock to BS3621:2004 standard meets the exacting demands of the insurance companies and the Police. Higher security levels are delivered by a 20mm bolt throw on every lock and deadbolts with four hardened rollers to protect against drilling and hacksawing. The Fortress Sashlock features a pull and twist action latch which can easily reverse the hand of the lock without the removal of the lock cover or screws. Both the Sashlock and Deadlock have hardened steel plates to resist drilling, and hardened steel rollers in the deadbolt to resist hacksawing. Each lock comes complete with a High Security 6 pin Oval Profile Cylinder resistant against picking or drill attack. Bolt through heavy-duty security roses protect the cylinder. The Fortress Rebates are available in two sizes 12.7mm (1/2”) and 25.4mm (1”) – with a choice of either Brass, Satin or Chrome finishes to match the forends. The Sashlock rebates are non-handed and come complete with full fitting instructions.

HIGH SECURITY FORTRESS OVAL CYLINDER DEADLOCK

ORDERING DETAILS
Deadlock Brass 64mm (2.5”) Satin 64mm (2.5”) Chrome 64mm (2.5”) Brass 76mm (3”) Satin 76mm (3”) Chrome 76mm (3”) Sashlock Brass 64mm (2.5”) Satin 64mm (2.5”) Chrome 64mm (2.5”) Brass 76mm (3”) Satin 76mm (3”) Chrome 76mm (3”) Deadlock Rebates Brass 1/2” Satin 1/2” Chrome 1/2” Brass 1” Satin 1” Chrome 1” Sashlock Rebates Brass 1/2” Satin 1/2” Chrome 1/2” Brass 1” Satin 1” Chrome 1” 266-31 266-51 266-61 366-31 366-51 366-61 267-31 267-51 267-61 367-31 367-51 367-61 426-31 426-51 426-61 427-31 427-51 427-61 428-31 428-51 428-61 429-31 429-51 429-61

HIGH SECURITY FORTRESS OVAL CYLINDER SASHLOCK

Deadlock

Sashlock

All dimensions in mm.

EURO VISCOUNT (NON BS) MORTICE LOCK RANGE
The ERA Euro Viscount offers total versatility allowing for most Euro Profile locking cylinders. Available as both Sash Lock and Dead Lock. They are ideal for replacing most existing door locks with minimal change to existing fittings. The lock has hardened steel rollers in the bolt to resist hacksawing. The Euro Viscount Sash Lock features an easily reversible latch bolt, making the lock suitable for left or right hinged doors. Rebate Sets for the Euro Pro-Fit Range are available separately.

ORDERING DETAILS
Dead Lock Brass 64mm (21/2”) Satin 64mm (2 /2”) Brass 76mm (3”) Satin 76mm (3”) Sash Lock Brass 64mm (21/2”) Satin 64mm (2 / ”)
2 1 1

225-31 225-51 325-31 325-51 EURO VISCOUNT (NON BS) DEAD LOCK

226-31 226-51 326-31 326-51

Brass 76mm (3”) Satin 76mm (3”) Dead Lock Rebate Sets Brass 12.7mm (1/2”) Rebate Satin 12.7mm ( /2”) Rebate Brass 25.4mm (1”) Rebate Satin 25.4mm (1”) Rebate Sash Lock Rebate Sets Brass 12.7mm (1/2”) Rebate Satin 12.7mm ( /2”) Rebate Brass 25.4mm (1”) Rebate Satin 25.4mm (1”) Rebate Euro Profile Cylinders See Cylinders section for more details
1 1

434-31 434-51 435-31 435-51

436-31 436-51 437-31 437-51

The above products are also available Clam-Packed.

EURO VISCOUNT (NON BS) SASH LOCK

Dead Lock
3 37 37

Sash Lock

11 20 44 (56) 44 (56) 65 (77) 55 26 65 (77) 180 87 134 162

96
108

87

40
25 30 21 R

19

All dimensions in mm. Numbers in brackets relate to 3” version of lock

VISCOUNT MORTICE LOCK RANGE
The ERA 5 Lever Viscount range of door locks are suitable to replace existing 2 and 3 lever door locks. They are available as both Sash and Dead Locks. Ideal for the volume user, the Viscount offers long service in demanding situations and is the right choice for replacement or new build projects. The Viscount is also available as a rebated lock, suitable for rebated French doors. The latch is easily reversed. Hardened steel rollers in the bolt resist hacksawing and all brass levers have false notching to resist lock picking. ERA Viscount Rebate Sets are also available individually, in two sizes - 12.7mm (1/2”) and 25.4mm (1”). Sash Lock Rebate Sets are nonhanded to reduce stock-holding. Full fitting instructions are supplied.

ORDERING DETAILS
VISCOUNT 5 LEVER DEAD LOCK Dead Lock Brass 64mm (21/2”) Brass 76mm (3”) Sash Lock Brass 64mm (21/2”) Brass 76mm (3”) Rebated Sash Lock Brass 64mm (21/2”) Spare Keys Cut key Key blank Dead Lock Rebate Sets Brass 12.7mm (1/2”) Rebate Brass 25.4mm (1”) Rebate Sash Lock Rebate Sets Brass 12.7mm (1/2”) Rebate Brass 25.4mm (1”) Rebate 436-31 437-31 434-31 435-31 509-56 609-56 217-32 202-31 302-31 201-31 301-31

The above products are also available Clam-Packed.

VISCOUNT 5 LEVER SASH LOCK

5 Lever Dead Lock

5 Lever Sash Lock

37 14 14

37

44 (56) 65 (77)

44 (56) 18 180 55 57 65 (77) 27

96

87

168

87 134

108 162

40

30

21

19

All dimensions in mm. Numbers in brackets relate to 3” version of lock

2 AND 3 LEVER MORTICE LOCKS
The ERA Range of 2 and 3 Lever Mortice Locks are low cost and offer added security for internal doors and outside applications such as sheds. The 2 Lever Sash Lock is available in 21/2” and 3”, in both brass and satin finishes. The numbered steel keys are supplied with over 36 variations. The 3 Lever Locks are available as Sash Lock or Dead Lock, 21/2” and 3”, in both brass and satin finishes. Two numbered steel keys are supplied with over 100 variations. Both the 2 and 3 Lever Sash Locks have easily reversible bolts.

ORDERING DETAILS
2 Lever Sash Lock Brass 64mm (21/2”) Brass 76mm (3”) 3 Lever Dead Lock Brass 64mm (21/2”) Satin 64mm (21/2”) 470-31 470-51 570-31 467-31 567-31 DEAD LOCK

Brass 76mm (3”) 3 Lever Sash Lock Brass 64mm (21/2”) Satin 64mm (21/2”) Brass 76mm (3”) Satin 76mm (3”) Spare steel key blank

471-31 471-51 571-31 571-51

Note: Order according to key differ number. 2 Lever key no. OL 1-20 3 Lever key no. OL 1-50 3 Lever key no. OR 51-100 Rebate Sets Brass 12.7mm (1/2”) Rebate for Dead Lock 480-31 Brass 12.7mm (1/2”) Rebate for Sash Lock 481-31
The above products are also available Clam-Packed.

606-56LH 606-56LH 606-56RH

SASH LOCK

3 Lever Dead Lock

2 and 3 Lever Sash Lock

44 (56) 65 (77) 65 (77)

44 (56)

All dimensions in mm. Numbers in brackets relate to 3” version of lock

REBATED & BATHROOM DOOR LOCKS
The ERA Rebated Door Lock is ideally suited for 13mm (1/2”) Rebated French Doors. Available in both brass and satin finish, the Rebated Door Lock features a reversible forend and sashbolt allowing fixing to both left or right hinged, inward or outward opening doors. The 2 Lever Rebated Door Lock is supplied with 2 cut keys. The ERA Bathroom Door Lock has been specially designed for bathroom doors. Available in both brass and satin finish, the Bathroom Lock features a deadbolt which is operated by a thumb turn handle. The latch bolt can be easily reversed, fitting both left or right hinged inward or outward opening doors.

ORDERING DETAILS
Rebated Door Lock REBATED DOOR LOCK Brass 64mm (21/2”) Satin 64mm (21/2”) Brass 76mm (3”) Satin 76mm (3”) 270-31 270-51 370-31 370-51

Bathroom Door Lock Brass 64mm (21/2”) Satin 64mm (21/2”) 240-31 240-51 340-31

Brass 76mm (3”)

Satin 76mm (3”) 340-51 Rounded forends and keeps available please contact for more information. The above products are also available Clam-Packed.

BATHROOM DOOR LOCK

Rebated Door Lock

Bathroom Door Lock

44 (56) 65 (77)

44 (56) 65 (77)

All dimensions in mm. Numbers in brackets relate to 3” version of lock.

GARAGE DOOR LOCK
The ERA Garage Door Lock offers extra security to metal canopy style garage doors. Each pack contains two locks, one for each side of the door. They are lockable from both inside and outside with one key operating both locks.

ORDERING DETAILS
Garage Door Locks Brass 76mm (3”) 318-32

Garage Door Lock

37

14

134

180

56
77

30

87

All dimensions in mm.


				
DOCUMENT INFO
Shared By:
Stats:
views:1221
posted:1/17/2010
language:English
pages:12
Description: ERA BRITISH STANDARD MORTICE LOCKS