Cat Mortice Locks V6

Document Sample
Cat Mortice Locks V6 Powered By Docstoc
					BRITISH STANDARD MORTICE LOCKS
ERA British Standard Mortice Locks are manufactured to conform to the BSI Specification for Thief Resistant Locks - BS3621:2007. This standard was created by a Standards Committee comprising of representatives from the police, government departments, local authorities, architects, window and door manufacturers and lockmakers. It provides a reference for type-testing and certification of thief resistant locks. Before the standard is awarded to a mechanical key operated lock, designed for fixing to hinged or sliding doors, it has to be passed by an independent panel of locksmith experts. SLOTS TO ACCOMMODATE BOLT THROUGH FURNITURE Once a lock has been accredited with the BS3621:2007 standard, it is recognised as giving the maximum protection generally available to the majority of both domestic and commercial premises. Many insurance companies recognise this and reduce premiums accordingly, whilst some will provide cover only if such locks are fitted. For a lock to be awarded BS3621:2007 it has to achieve the following criteria; HARDENED STEEL ANTI-DRILL PLATES • At least 1000 different key patterns (differs) and 999 different locks must be made before any key pattern can be used again. There must be at least 5 moveable levers used. If fewer than 9 levers are fitted there must be additional anti-picking precautions incorporated (such as false notching). If a key can be used on both sides of a door, both sides must offer equal security. Handles and knobs must not operate the bolt when deadlocked. Deadlocking must be effective before the key can be removed. The bolt must project not less than 20mm when locked. Both sides of the lock body must be protected by anti-drilling plates. Vulnerable fixing screws on all parts of the lock, cylinder and staple must be concealed or inoperable when the door is locked.

SPRING

FOREND

EASILY REVERSIBLE LATCH (NO NEED TO REMOVE TOP PLATE)

BOLT

•

• HARDENED STEEL PLATES BOLT THROWER STEEL LEVERS WITH FALSE NOTCHING • • • • •

REBATE SETS
For French doors, when a Mortice Deadlock or Sashlock is fitted, a Rebate Set should also be fitted to ensure secure closing. The measurement “A” must be either 1/2”or 1” where upon the appropriate sized rebate set should be used. Rebate Sets are supplied non-handed for use on either left or right handed fitment.

CROSS SECTION OF REBATE DOORS

INWARD OPENING

OUTWARD OPENING

LH
OUTSIDE OUTSIDE

LH

HANDING OF SASHLOCKS
Hinged doors can open in one of four ways and this will determine whether the door is left or right handed. All ERA Mortice Sashlocks are supplied handed left. Instructions are supplied for alteration to right handed fitment.

RH RH
OUTSIDE OUTSIDE

BRITISH STANDARD HIGH SECURITY FORTRESS CLASSIC MORTICE LOCK
This 5 lever British Standard High Security Mortice Lock to BS3621:2007 standard meets the exacting demands of the insurance companies and the Police. The Fortress Classic brings traditional style and craftsmanship to a modern mortice lock through its brass components. These brass components include 5 solid brass levers, key cam, follower, latchbolt, deadbolt, and 3 brass keys. Higher security levels are delivered by a 20mm bolt throw on every lock, and both the Sashlock and Deadlock have hardened steel plates to resist drilling, and four hardened steel rollers in the deadbolt resist hacksawing The Fortress Sashlock features a pull and twist action latch which can easily reverse the hand of the lock without the removal of the lock cover or screws. The Fortress Rebates are available in two sizes 12.7mm (1/2”) and 25.4mm (1”) - with a choice of either Brass effect, Satin or Chrome effect finishes to match the forends. The Sashlock rebates are non-handed and come complete with full fitting instructions.

BS3621:2007

Deadlock Brass 64mm (21/2”) Satin 64mm (21/2”) Chrome Effect 64mm Brass 76mm (3”) Satin 76mm (3”) Chrome Effect 76mm Sashlock Brass 64mm (21/2”) Satin 64mm (21/2”) Chrome Effect 64mm Brass 76mm (3”) Satin 76mm (3”) Chrome Effect 76mm

ORDERING DETAILS
231-31 231-51 231-61 331-31 331-51 331-61 232-31 232-51 232-61 332-31 332-51 332-61

(21/2”)

HIGH SECURITY FORTRESS CLASSIC MORTICE DEADLOCK

(3”)

(21/2”)

(3”)

All the above products are also available Clam-packed

Spare Keys – Cut key Key blank Deadlock Rebates Brass Effect 12.7mm (1/2”) Satin 12.7mm (1/2”) Chrome Effect 12.7mm (1/2”) Brass Effect 25.4mm (1”) Satin 25.4mm (1”) Chrome Effect 25.4mm (1”) Sashlock Rebates Brass Effect 12.7mm (1/2”) Satin 12.7mm (1/2”) Chrome Effect 12.7mm (1/2”) Brass Effect 25.4mm (1”) Satin 25.4mm (1”) Chrome Effect 25.4mm (1”) Locksmith Kit Deadlock
37 23

502-06 602-06 426-31 426-51 426-61 427-31 427-51 427-61 428-31 428-51 428-61 429-31 429-51 429-61 503103-00 Sashlock
37 23 13

HIGH SECURITY FORTRESS CLASSIC MORTICE SASHLOCK

44 (56) 67 (79) 180 19 89 54

44 (56) 67 (79)

96
19 57 109 162

178

178

26

134

30

23

23

All dimensions in mm.

BS3621:2007

BRITISH STANDARD HIGH SECURITY FORTRESS MORTICE LOCK
This 5 lever British Standard High Security Mortice Lock to BS3621:2007 standard meets the exacting demands of the insurance companies and the Police. Higher security levels are delivered by a 20mm bolt throw on every lock, and both the Sashlock and Deadlock have hardened steel plates to resist drilling, and two hardened steel plates in the deadbolt resist hacksawing The Fortress Sashlock features a latch bolt which can be easily reversed without the removal of the lock cover. The keys have 1,000 variations for added security. All steel levers have false notching to resist lock picking. The Fortress Rebates are available in two sizes 12.7mm (1/2”) and 25.4mm (1”) - with a choice of either Brass effect, Satin or Chrome effect finishes to match the forends. The Sashlock rebates are non-handed and come complete with full fitting instructions.

ORDERING DETAILS
Deadlock Brass Effect 64mm (21/2”) Satin 64mm (21/2”) Chrome Effect 64mm (21/2”) Brass Effect 76mm (3”) Satin 76mm (3”) Chrome Effect 76mm (3”) Sashlock Brass Effect 64mm (21/2”) Satin 64mm (21/2”) Chrome Effect 64mm (21/2”) Brass Effect 76mm (3”) Satin 76mm (3”) Chrome Effect 76mm (3”) Spare Keys – Cut key Key blank Deadlock Rebates Brass Effect 12.7mm (1/2”) Satin 12.7mm (1/2”) Chrome Effect 12.7mm (1/2”) Brass Effect 25.4mm (1”) Satin 25.4mm (1”) Chrome Effect 25.4mm (1”) Sashlock Rebates Brass Effect 12.7mm (1/2”) Satin 12.7mm (1/2”) Chrome Effect 12.7mm (1/2”) Brass Effect 25.4mm (1”) Satin 25.4mm (1”) Chrome Effect 25.4mm (1”) Locksmith Kit 261-31 261-51 261-61 361-31 361-51 361-61 262-31 262-51 262-61 362-31 362-51 362-61

HIGH SECURITY FORTRESS MORTICE DEADLOCK

All the above products are also available Clam-packed

502-56 602-56 426-31 426-51 426-61 427-31 427-51 427-61 428-31 428-51 428-61 429-31 429-51 429-61 502102-00

HIGH SECURITY FORTRESS MORTICE SASHLOCK

Deadlock
37 23 23 37

Sashlock

13

44 (56) 67 (79) 180 19 89

44 (56) 67 (79)

96
19 57 109 162

178

178

26

134

30

23

All dimensions in mm.

BRITISH STANDARD HIGH SECURITY FORTRESS EURO CYLINDER LOCK
This British Standard High Security Euro Cylinder Lock to BS3621:2004 standard meets the exacting demands of the insurance companies and the Police. Higher security levels are delivered by a 20mm bolt throw on every lock, and both the Sashlock and Deadlock have hardened steel plates to resist drilling, and four hardened steel rollers in the deadbolt to resist hacksawing. Each lock comes complete with a High Security 6 pin Euro Profile Cylinder resistant against picking or drill attack. Bolt through heavy-duty security roses protect the cylinder. The Fortress Sashlock features a pull and twist action latch which can easily reverse the hand of the lock without the removal of the lock cover or screws. The Fortress Rebates are available in two sizes 12.7mm (1/2”) and 25.4mm (1”) - with a choice of either Brass effect, Satin or Chrome effect finishes to match the forends. The Sashlock rebates are non-handed and come complete with full fitting instructions.

BS3621:2004
BS 3621: 004 2

ORDERING DETAILS
Deadlock Brass Effect 64mm (21/2”) Satin 64mm (21/2”) Chrome Effect 64mm (21/2”) Brass Effect 76mm (3”) Satin 76mm (3”) Chrome Effect 76mm (3”) Sashlock Brass Effect 64mm (21/2”) Satin 64mm (21/2”) Chrome Effect 64mm (21/2”) Brass Effect 76mm (3”) Satin 76mm (3”) Chrome Effect 76mm (3”) Deadlock Rebates Brass Effect 12.7mm (1/2”) Satin 12.7mm (1/2”) Chrome Effect 12.7mm (1/2”) Brass Effect 25.4mm (1”) Satin 25.4mm (1”) Chrome Effect 25.4mm (1”) Sashlock Rebates Brass Effect 12.7mm (1/2”) Satin 12.7mm (1/2”) Chrome Effect 12.7mm (1/2”) Brass Effect 25.4mm (1”) Satin 25.4mm (1”) Chrome Effect 25.4mm (1”) Deadlock 263-31 263-51 263-61 363-31 363-51 363-61 264-31 264-51 264-61 364-31 364-51 364-61

HIGH SECURITY FORTRESS EURO CYLINDER DEADLOCK

All the above products are also available Clam-packed

426-31 426-51 426-61 427-31 427-51 427-61 428-31 428-51 428-61 429-31 429-51 429-61

HIGH SECURITY FORTRESS EURO CYLINDER SASHLOCK

Sashlock

37 23 23

37 13

44 (56) 67 (79) 180 28 89 54

44 (56) 67 (79)

96
28 48 109 162

178

178

26

134

30

23

23

All dimensions in mm.

BS8621:2004
BS 8621: 004 2

BRITISH STANDARD KEYLESS EGRESS MORTICE LOCK
The conflict between a secure British Standard accredited front door lock and fire safety recommendations has now been overcome thanks to the new Keyless Egress Range. The new BS8621:2004 standard mirrors the BS3621:2004 but is for ‘escape’ locks. The locks are classified as providing keyless egress at all times. This applies where there is a requirement for an easy action method of opening an external door from the inside with no need for keys or similar devices for unlocking. Especially relevant for entrance doors in multi-residential and other buildings. A keyless lever on the inside of the door ensures its possible to make an emergency escape in the event of a fire.

ORDERING DETAILS
Euro Thumbturn Dead Lock Brass 64mm (21/2”) Satin 64mm (21/2”) Chrome Effect 64mm (21/2”) Brass 76mm (3”) Satin 76mm (3”) Chrome Effect 76mm (3”) Euro Thumbturn Sash Lock Brass 64mm (21/2”) Satin 64mm (21/2”) Chrome 64mm (21/2”) Brass 76mm (3”) Satin 76mm (3”) Chrome 76mm (3”) Oval Thumbturn Dead Lock Brass 64mm (21/2”) Satin 64mm (21/2”) Chrome 64mm (21/2”) Brass 76mm (3”) Satin 76mm (3”) Chrome 76mm (3”) Oval Thumbturn Sash Lock Brass 64mm (21/2”) Satin 64mm (21/2”) Chrome 64mm (21/2”) Brass 76mm (3”) Satin 76mm (3”) Chrome 76mm (3”) 233-31 233-51 233-61 333-31 333-51 333-61 234-31 234-51 234-61 334-31 334-51 334-61 235-31 235-51 235-61 335-31 335-51 335-61 236-31 236-51 236-61 336-31 336-51 336-61

HIGH SECURITY FORTRESS EURO THUMBTURN CYLINDER DEADLOCK

Thumbturn 35/35 Double Euro Cylinder 35/35 Brass (6 Pin) 4270-31 35/35 Satin (6 Pin) 4270-51 35/35 Chrome (6 Pin) 4270-61 HIGH SECURITY FORTRESS EURO THUMBTURN CYLINDER SASHLOCK Thumbturn 35/35 Double Oval Cylinder 35/35 Brass (6 Pin) 4273-31 35/35 Satin (6 Pin) 4273-51 35/35 Chrome (6 Pin) 4273-61 Sashlock
37 23 13

Deadlock
37 23

44 (56) 67 (79) 180 28 89 54

44 (56) 67 (79)

96
28 48 109 162

178

178

26

134

30

23

23

All dimensions in mm.

EURO PRO-FIT (NON BS) MORTICE LOCK RANGE
The ERA Euro Pro-Fit offers total versatility allowing for most Euro Profile locking cylinders. Available as both Sashlock and Deadlock. They are ideal for replacing most existing door locks with minimal change to existing fittings. The lock has hardened steel rollers in the bolt to resist hacksawing. The Euro Pro-Fit Sashlock features an easily reversible latch bolt, making the lock suitable for left or right hinged doors. Rebate Sets for the Euro Pro-Fit Range are available separately. Oval Cylinder versions are also available.

ORDERING DETAILS
Deadlock Brass Effect 64mm (21/2”) Satin 64mm (21/2”) Brass Effect 76mm (3”) Satin 76mm (3”) Sashlock Brass Effect 64mm (21/2”) Satin 64mm (21/2”) Brass Effect 76mm (3”) Satin 76mm (3”) 226-31 226-51 326-31 326-51 225-31 225-51 325-31 325-51 EURO PRO-FIT (NON BS) DEADLOCK

The above products are also available Clam-Packed.

Deadlock Rebate Sets Brass Effect 12.7mm (1/2”) Rebate Satin 12.7mm ( /2”) Rebate
1

434-31 434-51 435-31 435-51

Brass Effect 25.4mm (1”) Rebate Satin 25.4mm (1”) Rebate Sashlock Rebate Sets Brass Effect 12.7mm (1/2”) Rebate Satin 12.7mm ( /2”) Rebate
1

436-31 436-51 437-31 437-51

Brass Effect 25.4mm (1”) Rebate Satin 25.4mm (1”) Rebate Euro Profile Cylinders See Cylinders section for more details

EURO PRO-FIT (NON BS) SASHLOCK

Deadlock

Sashlock

96

87

40

19

All dimensions in mm. Numbers in brackets relate to 3” version of lock

VISCOUNT MORTICE LOCK RANGE
The ERA 5 Lever Viscount range of door locks are suitable to replace existing 2 and 3 lever door locks. They are available as both Sashlock and Deadlocks. Ideal for the volume user, the Viscount offers long service in demanding situations and is the right choice for replacement or new build projects. The Viscount is also available as a rebated lock, suitable for rebated French doors. The latch is easily reversed. Hardened steel rollers in the bolt resist hacksawing and levers have false notching to resist lock picking. ERA Viscount Rebate Sets are also available individually, in two sizes - 12.7mm (1/2”) and 25.4mm (1”). Sashlock Rebate Sets are nonhanded to reduce stock-holding. Full fitting instructions are supplied.

ORDERING DETAILS
VISCOUNT 5 LEVER DEADLOCK Deadlock Brass Effect 64mm (21/2”) Satin 64mm (21/2”) Brass Effect 76mm (3”) Satin 76mm (3”) Sashlock Brass Effect 64mm (21/2”) Satin 64mm (21/2”) Brass Effect 76mm (3”) Satin 76mm (3”) Rebated Sashlock Brass Effect 64mm (21/2”) Satin 64mm (21/2”) Spare Keys Cut key Key blank Deadlock Rebate Sets Brass Effect 12.7mm (1/2”) Rebate Satin 12.7mm (1/2”) Rebate Brass Effect 25.4mm (1”) Rebate Satin 25.4mm (1”) Rebate Sashlock Rebate Sets Brass Effect 12.7mm (1/2”) Rebate Satin12.7mm (1/2”) Rebate VISCOUNT 5 LEVER SASHLOCK Brass Effect 25.4mm (1”) Rebate Satin 25.4mm (1”) Rebate 436-31 436-51 437-31 437-51 202-31 202-51 302-31 302-51 201-31 201-51 301-31 301-51

The above products are also available Clam-Packed.

217-32 217-52 509-56 609-56 434-31 434-51 435-31 435-51

5 Lever Deadlock

5 Lever Sashlock

37 14 14

37

44 (56) 65 (77)

44 (56) 18 180 55 57 27 65 (77)

96

87

168

87 134

108 162

40

30

21

19

All dimensions in mm. Numbers in brackets relate to 3” version of lock

2 AND 3 LEVER MORTICE LOCKS
The ERA Range of 2 and 3 Lever Mortice Locks are low cost and offer added security for internal doors and outside applications such as sheds. The 2 Lever Sashlock is available in 21/2” and 3”, in both brass effect and satin finishes. The numbered steel keys are supplied with over 36 variations. The 3 Lever Locks are available as Sashlock or Deadlock, 21/2” and 3”, in both brass effect and satin finishes. Two numbered steel keys are supplied with over 100 variations. Both the 2 and 3 Lever Sashlocks have easily reversible bolts.

ORDERING DETAILS
2 Lever Sashlock Brass Effect 64mm (21/2”) Brass Effect 76mm (3”) 3 Lever Deadlock Brass Effect 64mm (21/2”) Satin 64mm (21/2”) Brass Effect 76mm (3”) 3 Lever Sashlock Brass Effect 64mm (21/2”) Satin 64mm (21/2”) 473-31 473-51 573-31 573-51 472-31 472-51 572-31 468-31 568-31 DEADLOCK

Brass Effect 76mm (3”) Satin 76mm (3”)

The above products are also available Clam-Packed.

Spare steel key blank Note: Order according to key differ number. C01:C15-S01:S50 C16:C30-S51:S100 D01:D20 D21:D40 605-56LH 605-56RH 606-56LH 606-56RH

SASHLOCK

3 Lever Deadlock

2 and 3 Lever Sashlock

44 (56) 65 (77) 65 (77)

44 (56)

All dimensions in mm. Numbers in brackets relate to 3” version of lock

REBATED & BATHROOM DOOR LOCKS
The ERA Rebated Door Lock is ideally suited for 13mm (1/2”) Rebated French Doors. Available in both brass effect and satin finish, the Rebated Door Lock features a reversible forend and sashbolt allowing fixing to both left or right hinged, inward or outward opening doors. The 2 Lever Rebated Door Lock is supplied with 2 cut keys. The ERA Bathroom Door Lock has been specially designed for bathroom doors. Available in both brass and satin finish, the Bathroom Lock features a deadbolt which is operated by a thumb turn handle. The latch bolt can be easily reversed, fitting both left or right hinged inward or outward opening doors.

ORDERING DETAILS
Rebated Door Lock REBATED DOOR LOCK Brass Effect 64mm (21/2”) Satin 64mm (21/2”) Brass Effect 76mm (3”) Satin 76mm (3”) 287-31 287-51 387-31 387-51

Bathroom Door Lock Brass Effect 64mm (21/2”) Satin 64mm (21/2”) 243-31 243-51 343-31

Brass Effect 76mm (3”)

Satin 76mm (3”) 343-51 Rounded forends and keeps available please contact for more information. The above products are also available Clam-Packed.

BATHROOM DOOR LOCK

Rebated Door Lock

Bathroom Door Lock

44 (56) 65 (77)

44 (56) 65 (77)

All dimensions in mm. Numbers in brackets relate to 3” version of lock.

GARAGE DOOR LOCK
The ERA Garage Door Lock offers extra security to metal canopy style garage doors. Each pack contains two locks, one for each side of the door. They are lockable from both inside and outside with one key operating both locks.

ORDERING DETAILS
Garage Door Locks Brass 76mm (3”) 318-32

Garage Door Lock
37

14

134

180

56

77

30

87

All dimensions in mm.


				
DOCUMENT INFO
Shared By:
Tags: Mortice, Locks
Stats:
views:229
posted:1/17/2010
language:English
pages:10
Description: Cat Mortice Locks V6