How to Configure a Speedtouch 516 DSL Modem

							                       How to Configure a Speedtouch 516 DSL Modem


Step 1.
Open up Internet Explorer and enter the address shown below (10.0.0.138) in the address bar.




Note: If a logon Screen Appears like in Wizard Step 8 then Enter “Administrator” for the User Name
and for the Password enter your Login Password, if it was preconfigured by us or leave blank if it is
from factory default settings..
Step 2.
Once you enter the information you will see this screen.
Click on the Advanced Option on the left hand side of the screen.
Click on the Easy Setup menu option.
Step 3.
Once you click on Easy Setup a new window will appear.
Click on Next
Step 4.
Select Routed PPPoE – DHCP – NAPT
Click Next
Step 5.
Set VPI/VCI to 0.35
Click Next
Step 6.
Enter your User Name: provided to you by your Internet Service Provider
Enter your Password: provided to you by your Internet Service Provider
Click Next
Step 7.
Enter User Name: DSL
Enter your Password: provided to you by your Internet Service Provider
Click Next
Step 8.
Click Start
Step 9.
Once you start your modem will be configuring.
Wait a moment.
Step 10.
Enter User Name: DSL
Enter your Password: provided to you by your Internet Service Provider
Click OK
Step 11.
Click Finish
Step 12.
Once you click Finish you will see this screen.
You may begin to surf the internet.