JM PVC Inside Corners and JM PVC Pipe Boots by broverya72

VIEWS: 17 PAGES: 1

									                                                                  Single Ply Roofing Systems (PVC)
                                                                  JM PVC Inside Corners



Description                                                       Weight Per Box
JM PVC Inside Corners are manufactured with a flexible, non-      5 lb (2.3 kg)
reinforced thermoplastic membrane using an ultraviolet-
resistant polyvinyl chloride and an Elvaloy® KEE (ketone          Storage
ethylene ester) formulation.                                      JM PVC Inside Corners should be kept dry and clean prior to
                                                                  installation.
The PVC Inside Corners are designed specifically for inside
corner flashings.                                                 Installation
                                                                  Refer to JM PVC Applicator Guides or Detail Drawings for
Colors
                                                                  instructions.
White, Grey, Sandstone
                                                                  Precautions
Packaging
                                                                  Refer to the Material Safety Data Sheet prior to using JM PVC
24 per box                                                        Inside Corners. Material Safety Data Sheet is available by
                                                                  calling (800) 922-5922 or on the Web at www.jm.com/roofing.
Size
6½" x 6" x 6" (16.51 cm x 15.24 cm x 15.24 cm)



RS-8308 4-08 (Replaces 3-06)



                                                                  JM PVC Pipe Boots
Description                                                       Weight Per Piece
JM PVC Pipe Boots are manufactured with a flexible, nonrein-      1" - 4" (25.4 mm - 10.16 cm): 1.0 lb (0.5 kg)
forced thermoplastic membrane using an ultraviolet-resistant      3" - 7" (7.62 cm - 17.78 cm): 1.0 lb (0.5 kg)
polyvinyl chloride and an Elvaloy® KEE (ketone ethylene ester)    7" - 12" (17.78 cm - 30.48 cm): 2.0 lb (0.9 kg)
formulation. They are used to flash vent stacks and other round
penetrations.                                                     Storage
                                                                  JM PVC Pipe Boots must be kept clean and dry prior to instal-
Sizes                                                             lation.
1" - 4" (25.4 mm - 10.16 cm)
3" - 7" (7.62 cm - 17.78 cm)                                      Installation
7" - 12" (17.78 cm - 30.48 cm)                                    Refer to JM PVC Applicator Guides or Detail Drawings for
                                                                  instructions.
Colors
White, Grey, Sandstone                                            Precautions
                                                                  Refer to the Material Safety Data Sheet prior to using JM PVC
Packaging                                                         Pipe Boots. Material Safety Data Sheet is available by
12 per box                                                        calling (800) 922-5922 or on the Web at www.jm.com/roofing.




RS-8318 4-08 (Replaces 2-08)

								
To top