1 [Details of Tender TU/11-19(Tender)/2005/360-A, Dt. : 30-04-07]
A) Specifications of equipment for Electronics and Communication Engg.
Equipments for Digital Switching Circuit Laboratory, B TechSemester-III
Sr. 1. Equipment
Specification
TTL and CMOS Logic gate characteristics modular experiment kit a) CMOS/TTL NAND gates of all types b) Experiments to measurei) Voltage and Current parameters ii) Power dissipation iii) Sink current and source current iv) LOW and HIGH state fanout v) Wired AND operation vi) Open collector operation c) 8 Nos input toggle switches d) Output indicating LEDs (bicolour) e) Analog dc voltmeter and ammeter (mA and µA) f) Separate load resistors g) Potentiometers h) Variable voltage source( 0 to 5V , 20V) i) Sturdy patch chords j) Regulated power source with ground outputs k) High quality metal cabinet with good finishing l) Diagrams should be mimicked on the box top m) Detailed diagrams in manual a) TTL and CMOS NAND gates b) CMOS buffer and resistors as level translator c) Experiment to coveri) TTL and CMOS NAND interfacing ii) TTL output and CMOS input compatibility with level translator and buffer iii) CMOS output to TTL input compatibility with buffer and level translator d) 8 Nos input toggle switches a) Output indicating LEDs (bicolour) b) Separate load resistors c) Variable voltage source( 0 to 5V , 20V) d) Sturdy patch chords e) Regulated power source with ground outputs f) High quality metal cabinet with good finishing g) Diagrams should be mimicked on the box top n) Detailed diagrams in manual 1. Experiments to cover to prove De’morgans theorems. 2. Other specifications:
3.
TTL and CMOS interfacing experiment kit:
4.
De’morgans theorem kit
2 i) 8 Nos input toggle switches ii) Output indicating LEDs (bicolour) h) Separate load resistors i) Variable voltage source( 0 to 5V , 20V) j) Sturdy patch chords k) Regulated power source with ground outputs l) High quality metal cabinet with good finishing m) Diagrams should be mimicked on the box top n) Detailed diagrams in manual a) NAND , NOR and NOT gates b) Experiments to coveri) Verification of truth table of basic NOR gate based SR latch ii) Verification of truth table of basic NAND gate based SR latch iii) Verification of truth table of NAND gate based clocked SR F/F iv) Verification of truth table of NAND gate based clocked D F/F v) Verification of truth table of NAND gate based clocked JK F/F vi) Verification of truth table of NAND gate based clocked T F/F c) 8 Nos input toggle switches d) Output indicating LEDs (bicolour) e) Variable voltage source (0 to 5V, 20V) f) Sturdy patch chords g) Regulated power source with ground outputs h) High quality metal cabinet with good finishing i) Diagrams should be mimicked on the box top j) Detailed diagrams in manual a) Clocked RS, JK, D and T F/F b) Additional AND,NOT,OR , NOR NAND c) Experiments to coveri) Conversion of RS to JK ii) Conversion of RS to D iii) Conversion of JK to T iv) Conversion of T to JK v) Conversion of D to RS d) 8 Nos input toggle switches e) Output indicating LEDs (bicolour) f) Self and switched clock g) Sturdy patch chords h) Regulated power source with ground outputs i) High quality metal cabinet with good finishing j) Diagrams should be mimicked on the box top l) Detailed diagrams in manual
5.
Flip-Flop characteristics study kit:
6.
Flip-Flop design and conversion kit:
3 7. Flip-flop operating characteristics study kit: a) SR Flip-flops b) Experiments to be coveredi) Verification of asynchronous inputs (Pr) and (Cr) in a clocked SR F/F ii) Verification of propagation delay, setup time, hold time of a SR F/F using oscilloscope and logic analyzer iii) Verification of racing condition of a JK F/F using oscilloscope and logic analyzer iv) Operation of a master slave JK F/F v) Verification of bounchless switch operation using F/F Following parts to be available: a. toggle switches b. Output indicating LEDs (bicolour) c. Self and switched clock d. Sturdy patch chords e. Regulated power source with ground outputs f. High quality metal cabinet with good finishing g. Diagrams should be mimicked on the box top h. Detailed diagrams in manual
8.
Single mode asynchronous counter operation kit
1. 2 Nos IC 7493 2. Other specifications: a) toggle switches b) Output indicating LEDs (bicolour) c) Sturdy patch chords d) Self and switched clock e) Regulated power source with ground outputs f) High quality metal cabinet with good finishing g) Diagrams should be mimicked on the box top h) Detailed diagrams in manual 3. The following experiments to be covered: a) Development and operation of a 4 bit asynchronous ripple counter using 4 nos JK F/F b) Verification of a 4 bit ripple counter IC operation in mod-10,12,14,16,and mode-50 1. 2 Nos decade counters 2. NAND gates 3. Other specifications: a. toggle switches b. Output indicating LEDs (bicolour) c. Self and switched clock d. Sturdy patch chords e. Regulated power source with ground outputs
9.
Asynchrounous decade counter IC operation kit:
4 f. High quality metal cabinet with good finishing g. Diagrams should be mimicked on the box top h. Detailed diagrams in manual 10. Design and operation of synchronous multi-mode counter kit 1. 2. 3. 4. JK F/F ICs AND gate IC Up-down counter circuit arrangement Other specifications: a. toggle switches b. Output indicating LEDs (bicolour) c. Self and switched clock d. Sturdy patch chords e. Regulated power source with ground outputs f. High quality metal cabinet with good finishing g. Diagrams should be mimicked on the box top h. Detailed diagrams in manual Synchronous 4 bit binary counter IC(74163) Synchronous decade counter IC(74160) Synchronous up/down counter IC(74190/191) Synchronous 4 bit counter IC(74560/561) Synchronous programmable counter IC(74193) Other specifications: a. toggle switches b. Output indicating LEDs (bicolour) c. Self and switched clock d. Sturdy patch chords e. Regulated power source with ground outputs f. High quality metal cabinet with good finishing g. Diagrams should be mimicked on the box top h. Detailed diagrams in manual
11. Synchronous counter IC operation kit:
1. 2. 3. 4. 5. 6.
12. Pulse train generator kit
13.
Multiplexer/DEMUX kit
1. Crystal clock generator using CMOS inverter(7404) with crystal, capacitors, resistors and CMOS inverter. 2. Astable multivibrator using 555 with different C and R 3. Astable multivibrator using 741 with different C and R 4. Astable multivibrator using Schmitt trigger(7414) 7. Other specifications: a. toggle switches b. Output indicating LEDs (bicolour) c. Sturdy patch chords d. Regulated power source with ground outputs e. High quality metal cabinet with good finishing f. Diagrams should be mimicked on the box top g. 1. Design of a simple 4:1, 8:1 MUX 8. Other specifications: a. toggle switches b. Output indicating LEDs (bicolour)
5 c. Sturdy patch chords d. Regulated power source with ground outputs e. High quality metal cabinet with good finishing f. Diagrams should be mimicked on the box top
14. Encoder-Decoder kit
1. 2. 3. 4. 5.
3 to 8 line decoder BCD to decimal decoder BCD to 7 segment decoder Other types of decoders Other specifications: a. toggle switches b. Output indicating LEDs (bicolor) c. Sturdy patch chords d. Regulated power source with ground outputs e. High quality metal cabinet with good finishing f. Diagrams should be mimicked on the box top
15. Detector kit:
1. Experiments to be covered: a) Parity detector and checker b) Majority detectors 2. Other specifications: a) toggle switches b) Output indicating LEDs (bicolor) c) Sturdy patch chords d) Regulated power source with ground outputs e) High quality metal cabinet with good finishing f) Diagrams should be mimicked on the box top a) b) c) d) e) f) g) h) i) j) k) l) m) Microcontroller based BW: -3dB tr: 24nS Calb: 5mV/Div Accuracy: +/- 3% Zi: 1Mohms Parll 25 pF Vi: 500V Time base: 0.5 micro S/Div Trigger: Dual Hor: 6V/Div CRT: 76mm PS: stabilized Calb: 0.2V, 1Khz, square a) b) c) d) e) f) Microcontroller based BW: -3dB tr: 24nS Calb: 5mV/Div Accuracy: +/- 3% Zi: 1Mohms Parll25 pF
16. Microcontroller based Oscilloscope with pulse generator and power supply: 15 MHz
17. Microcontroller based Oscilloscope with pulse generator and power supply: 35 MHz
6 g) h) i) j) k) l) m) 18. Digital Handheld Multimeter: Vi: 500V Time base: 0.5 micro S/Div Trigger: Dual Hor: 6V/Div CRT: 76mm PS: stabilized Calb: 0.2V, 1KHz, square
19. Power supply:
20. Power supply:
21. Digital breadboard(general purpose)
3 ½ digit , 300mV-1000 V DC; Resolution- 1% 3- 750 V AC, Res- 1.5% ; 300 micro- 10 milli A - DC Current ; Res- 1 micro Amps ; 0.1 ohm- 30 Mohms- Resistance ; Freq300 KHz; Freq response: 45- 450HZ; Max Volt: 750V; form factor : 1.1 high resolution, genuine quality a) 0-30V,1A, Coarse and fine b) 5 V fixed,1A c) Current limit: 10mA-1A d) Resolution: 10mV,2mA e) Zi< 15 mohm f) Regulation<0.05 g) Ripple<1mV h) Display: 3 digit, 31/2 digit i) Accuracy: +/- 1% j) Over range, overload protector k) Weight, 4 kg a) 0-30V,2A, Coarse and fine l) 5 V fixed,1A m) Current limit: 100mA-2A n) Resolution: 10mV,5mA o) Zi< 15 m ohm p) Regulation<0.05 q) Ripple<1mV r) Display: 3 digit, 31/2 digit s) Accuracy: +/- 1% t) Over range, overload protector u) Weight, 4 kg a) size: 172.5 x 128.5 b) tie: 1685 c) Power: +5V,1A ; 5V,500mA, +3V-15V,500mA(Variable); -3V-15V,500mA(Variable) d) Pulse: 1HZ to 1 MHZ in steps, 3V-15V (CMOS),5V(TTL) e) Duty: 50% f) 2 nos switches g) 8 nos logic switches ( toggle) ) for both TTL & CMOS h) Disply: 7 segment – 3 Nos, i) Bicolor LEDs j) Logic probe: TTL & CMOS k) Size: 450 x 100 x 260 mm ( approx) l) High quality bread board and cabinet
7 22. Programmable logic device kit a) b) c) d) e) f) g) 16 DIP switch input 16 LED indicator Keyboard interface Pulse inputs- 2 nos 7 segment display- 8 digit compatible any PLD IC sample CPLD chip a) 8 bit variable continuous data b) Clock: 240 KHz( internal); 1 MHz( external) c) Rise time< 100 nS
23. Variable digital signal generator:
24. Digital IC tester
25. Microcontroller based Oscilloscope with pulse generator and power supply: 25 MHz
a) Socket for 10,16,20,20,40 pin IC b) TTL/CMOS testing c) Display: OK, Damaged, empty etc. d) IC number display e) IC safeguard/protect n) Microcontroller based o) BW: -3dB p) tr: 24nS q) Calb: 5mV/Div r) Accuracy: +/- 3% s) Zi: 1Mohms Parll25 pF t) Vi: 500V u) Time base: 0.5 micro S/Div v) Trigger: Dual w) Hor: ).6V/Div x) CRT: 76mm y) PS: stabilized z) Calb: 0.2V, 1Khz, square
Equipments for Analog Circuit Laboratory, B Tech- Semester-III,
Sr. 1. Equipment
Specification
Analog breadboard kit 1. General board: a. Regulated DC: +5V- 1A, fixed, +/- 12V, 500 mA ( Fixed), +/- 12 V, 500mA ( variable) b. Regulated ac: 18 V with centre tap, 500 mA c. Bread board: size: 172.5 x 128.5, tie: 1685 d. Pulse: sine,square/triangular, 1 Hz- 10 KHZ e. Short cKt tester with beep sound f. Good quality patch cords g. All input/output terminals positioned properly h. Good quality cabinet i. Weight, 4 kg 2. Add on boards compatible with item above:
8 a) b) c) d) e) f) g) h) i) j) k) l) FET characteristics CE amplifer charatc. CB amplifier charatc. CC amplifier charatc. Class A amplifier charatc. Class B amplifier charatc. Class C amplifier charatc. Pushpull amplifier charatc. UJT character. MOSFET chartract. Photocell Charact. Photo transitor charact.
2.
Audio generator:
a) b) c) d) e) f) g) h) i) j) k) a) b) c) d) e) f) g) h) i) j)
Distortion: sine- 10 Hz to 100 KHz Mode: sine and square Freq: 10 Hz - 100 KHz in decade steps Stability: 0.1% over 1 hr Accuracy: +/- 1 digit, 30 V pp- +/- 3% Rise/fall tme: 70nS Voc: 30Vpp Dl: 15Vpp Zo: 50 ohms Freq response: +/- 0.2 dB(LP), 0.5dB(HP)
3.
High Frequency function generator: 10 MHZ
4.
Microcontroller based Oscilloscope with pulse generator and power supply: 20 MHz
Output: sine, square, ramp, trianular, pulse Freq: 1Hz- 10MHz Accuracy: +/- 2% Rise/fall time< 50nS Duty cycle: variable Voc: 20Vpp Zo: 50 ohms Offset: +/-5V Modulation:AM,FM,ASK,FSK,PWM Dist: 1.5% - 2% a) Microcontroller based b) BW: -3dB( DC -20MHz) c) tr: 24nS d) Calb: 5mV/Div e) Accuracy: +/- 3% f) Zi: 1Mohms Parll25 pF g) Vi: 500V h) Time base: 0.5 micro S/Div i) Trigger: Dual j) Hor:.6V/Div k) CRT: 76mm l) PS: stabilized m) Calb: 0.2V, 1Khz, square
9 n) 3 1/2 digit display for function generator 5. OrCad Circuit Design Software 6 Arbitrary Function Generator a) ORCAD capture with 5 user license b) PSPICE A/D with 5 user license
1) Capable of Generating Standard Waveforms like : Pulse , Sine, Square, Triangle, Ramp at 20 MHz 2) Instrument Should generate Arbitrary Customized waveforms. 3) Should have capability of AM, FM, PM, FSK, PWM Linear & Logarithmic Sweep and Burst Mode of Operation. 5) Compatible with IBM PC through USB, GP – IB and LAN. It should also be compatible with LXI Class C Specifications. 6) It should have graph mode for visual verification of Signal settings. 7) It should have the required Software for control and generation of Arbitrary waveform from PC. SPECIFICATION :-i) 1 micro Hz. to 20 MHz for Sine & Square waveforms. ii) Resolution : 10 micro Hz. iii) Frequency Accuracy : 1 micro Hz. iv) Amplitude : 10 v (pp) in 50 ohms. v) Harmonic distortion in Sinewave spectral : better than - 40 dB vii) Phase Noise : - 115 dbc / Hz. At 10 KHz. Offset. vi) Sweep : Linear & log., Up & down with Programmable start/stop frequency. vii) Burst : Count up to 50 Kc/s., Infinite , Gated, Phase -360 deg. to +360 deg. viii) AM : Source both Internal & External , Depth 0 to 120 %. ix) FM : Source both Internal & Frequency :
External Deviation DC. to 10 MHz.
x) PM : Source both Internal & External , Deviation 0 to 360 deg. C. : Source both Internal & External. Deviation 0 % to 100 %.
xi) PWM
10
Equipments for Electrical Technology Laboratory, B Tech- Semester-III, Sl.No
Items with Specifications
Regenerative breaking of D.C.series motor
Specifications: 3 HP, 220 Volts, 1500-RPM D. C. Series Motor with Interpoles coupled with 2 KW, 220 Volts, 1500 RPM with Interpoles, D.C. Series Generator. Above Machine are mounted on common M. S. Bed Plate and coupled with each other directly with Flexible coupling CONTROL PANEL: 1. Control Panel for above M. G. Set consisting of following Items: 2. Construction: 3. M. S. Fabricated complete with Powder coating. MOTOR : 1. 2. 3. 4. 5. 6. 7. M. C. B (DP) Type Fuses (Appropriate current capacity) Indicating Lamp D. C. Starter – 3 Point – Hand Operated Voltmeter 0 – 300 Volts, M. C. Type (96X96) Ammeter 0 – 20 Amps M. C. Type, (96X96) Ammeter 0 – 2 Amps M. C. Type (96X96) 1 No. 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No.
1.
GENERATOR : 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. M. C. B (DP) Type 1 No. Fuses (Appropriate current capacity) 2 Nos. Indicating Lamp 1 No. Field Regulator of Appropriate Capacity 1 No. Voltmeter 0 – 300 Volts, M. C. Type (96X96) 1 No. Ammeter 0 – 20 Amps M. C. Type, (96X96) 1 No. Ammeter 0 – 2 Amps M. C. Type (96X96) 1 No. Tachogenerator 2 Nos All above Meters should be Standard Make (AE, MECO) One Bakelite sheet provided with all necessary educational type terminals. All necessary connectors for Motor and Generator with Internal wiring to be provided inside the Panel.
11 Method of starting and speed control of 3-phase induction motor Specifications:
2.
SQUIRREL CAGE INDUCTION MOTOR WITH LOADING ARRANGEMENT WITH CONTROL PANEL 3 HP, 415 Volts, 1440-RPM, 3-Phase, Squirrel Cage Induction Motor. The above Motor ito be provided with complete Mechanical Loading arrangement, which includes drum pulley, 2 Nos. Spring Balance, Belt with Liner and complete M. S. Structure CONTROL PANEL: 1. Control Panel for above Motor consisting of following Items: 2. Construction: 3. M. S. Fabricated complete with Powder coating. MOTOR : M. C. B (TP) Type 1 No. Fuses (Appropriate current capacity) 3 Nos. Indicating Lamp 3 Nos. D. O. L Starter 1 No. Star Delta Starter 1 No. Voltmeter 0 – 500 Volts, M. I. Type (96X96) 1 No. Ammeter 0 – 10 Amps M. I. Type, (96X96) 1 No. Wattmeter 500 Volts, 5 Amps (96X96) 2 Nos. Tachogenerators 2 Nos One Bakelite sheet provided with all necessary educational type terminals. All necessary connectors for Motor and Generator with Internal wiring to be provided inside the Panel. All above Meters are of Standard Make (AE, MECO) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
3.
Parallel operation of transformer Specifications:
Parallel Operation of 1 KVA, 3-Phase Transformer Set up with Panel: Complete with voltmeters, ammeters, switches, fuses, connectors, 3 phase inductive and resistive balanced load, wattmeter for power measements.
Synchronous motor V curves Equipment :
4. Specifications: SYNCHRONOUS MOTOR: 3 HP, 415 Volts, 3-Phase, 50 Hz, 4 Pole, Frame Size: 132, 1500 RPM Auto Synchronous Motor with Mechanical Loading (Breaking Unit) Arrangement consisting of Drum Pulley, 2 Nos. Spring Balance, Belt with Liner to determine the V-Curve and Inverted V-Curve
CONTROL PANEL: M. S. Fabricated, Powder Coated Control Panel Fitted with following Items and complete with Internal Wiring. All the Terminals to be brought out on a Bakelite Sheet and Fitted with Banana Socket.
12
a) Voltmeter 96 x 96 AE/MECO - 0 – 500 Volts AC with Selector Switch 1 No. b) Ammeter 96 x 96 AE/MECO - 0 – 15 Amp AC 1 No. c) Frequency Meter 96 x 96 AE/MECO (45 Hz to 55 Hz) AC 1 No. d) Power Factor Meter 96 X 96 AE/MECO 1 No. e) Ammeter 96 x 96 AE/MECO – 0 – 3 Amps DC 1 No. f) Variable Auto Transformer (Variac), 10 Amps with Rectifier Bridge 1 No. g) Start Run Switch 1 No. h) D. O. L. Starter 1 No. d) Knife & Blade Switch 1 No. j) Tachogenerators 2 Nos All necessary Terminals & Connectors, Fuses, MCB, Indicating Lamp & Switches to be provided with the setup.
List of Componets and Handtools for Basic Electronics Lab, B.Tech (ECE) Program. Sl no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Item Screw driver 15 cm Screw driver 20 cmx 9mm blade Screw driver 100 mm blade Screw driver kit (set of 6 ) Allen key sets Hammer 110 gm with handle Steel rule 300 mm Long nose plier 15cm insulated Diagonal cutter 15cm insulated Tweezer Watch makers screw driver set Neon tester (pen type) Wire striper Knife Electrician double bladed Heat sink plier Tool box/bag Soldering iron 25W,35W,65W Hand drill with bits Portable electric drill Hacksaw frame 200mm with blade File flat smooth 200mm File round 200mm 2nd cut File half round 250mm File triangular 150mm Instruments file set of 12
13 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 Crimping tool Wire gauge Spanner double ended(set of 12) 6 to12mm Spanner adjustable Soldering station De-soldering station De-soldering pump Flux Soldering lead Hook-up wire 4 diff colours Connecting wire 4 diff colours Wire striper Bread board Crocodile connectors Insulation tape diff colours Soldering Iron stand Transistor diff types Diodes diff types Capacitors electrolytic diff ratings Capacitors mica type diff ratings Capacitors ceramic, paper type diff ratings Resistors diff ratings Inductor diff ratings Zener diode Potentiometer diff values Preset diff values LED diff colours Transformer 6-0-6v,9-0-9v,12-0-12v Switches (Dip,Rotary,Push button,Toggle,Rocker type etc. LED display (7-segment) unit Crystal diff ratings SCR diff types Component container (cabinet type) Manuals and Data books Misc.
B) SPECIFICATIONS FOR HARDWARE & SOFTWARE FOR THE DEPARTMENT OF MATHEMATICAL SCIENCES
14 The following are details of software and other accessories for which price quotations and necessary details are called from authorized dealers, suppliers, to be purchased for the ongoing DST project on Computational Seismology under the Department of Mathematical Sciences, Tezpur University. PART -I
Software Details:
I. MATLAB & SIMULINK and their Modules and Tools
1. MODULES MATLAB MATLAB Compiler MATLAB Report Generator MATLAB Web Server MATLAB Runtime server Development Kit MATLAB Runtime Distribution MATLAB Runtime Toolbox Distribution MATLAB Excel Builder MATLAB COM Builder 2. MATLAB Toolboxes: Math and Analysis Optimization Toolbox Statistics Toolbox Neural Network Toolbox Symbolic Math Toolbox Extended Symbolic Math Toolbox Partial Differential Equation Toolbox Mapping Toolbox Spline Toolbox Curve Fitting Toolbox Virtual Reality Toolbox 3. MATLAB Toolboxes: Data Acquisition & Import Data Acquisition Toolbox Instrument Control Toolbox Database Toolbox Excel Link 4. MATLAB Toolboxes: Signal & Image Processing Signal Processing Toolbox Image Processing Toolbox MATLAB Link For Code Composer Studio Communication Toolbox System Identification Toolbox Wavelet Toolbox Filter Design Toolbox 5. MATLAB Toolboxes: Control Design & Analysis Control System Toolbox Fuzzy Logic Toolbox Robust Control Toolbox Mu Analysis and Synthesis Toolbox LMI Control Toolbox
15
Model Predictive Control Toolbox Model-Based Calibration Toolbox 6. MATLAB Toolboxes: Finance & Economics Financial Toolbox Financial Time Series Toolbox GARCH Toolbox Data feed Toolbox Financial Derivatives Toolbox 7. Simulink Simulink Simulink Performance Tools Stateflow Stateflow Coder Real-Time Workshop Real-Time Workshop Embedded Coder Embedded Target For Motorola MPC555 Real-Time Windows Target XPC Target XPC Target Embedded Option Simulink Report Generator Requirements Management Interface SimMechanics Embedded Target for TI.C6000 DSP 8. Simulink Blocksets DSP Blockset Fixed-Point Blockset SimPower Systems Blockset Dials & Gauges Blockset Communications Blockset
II. MATHEMATICA and its tools
1. Mathematica Professional Software Ver 5.2/Later 2. MATHEMATICA ADD-ON TOOLS Advanced Numerical Methods Control System Professional Control System Professional Suite Digital Image Processing Dynamic Visualizer Electrical Engineering Examples Experimental Data Analyst Finance Essentials Fuzzy Logic Mathematica Link for Excel Mechanical Systems Neural Networks A New Kind of Science Explorer: Mathematica Kit Parallel Computing Toolkit
16
Scientific Astronomer Signals and Systems Structural Mechanics Time Series Wavelet Explorer 3. MATHEMATICA ADD-ON TOOLS (Third Party) Analog Insydes Artlandia Derivatives Expert Geometrica Global Optimization 4.0/Higher version Industrial Electromagnetism Industrial Optimization Industrial Thermics Machine Learning Framework MathCode C++ MathCode F90 Mathematica for ActiveX Mathematica Link for LabVIEW MathEverywhere Courseware Series MathModelica 2.1 / Higher version - Complete simulation MathStatica MathOptimizer Professional MathTensor nVizx Operations Research 3.0/Higher Version PathwayLab Research Edition PrimeKit SchematicSolver Tensors in Physics Tsi ProPac UnRisk PRICING ENGINE UnRisk STANDARD VisualDSolve 4. MATHEMATICA ADD-ON MODULES(Others) Calculus WIZ Database Access Kit Database Access Kit (Build in Base Model) Leibniz Optica
Important specifications for the software mentioned above i.e. MATLAB & MATHEMATICA:1. Prices for each of the above mentioned products and their modules must be quoted for 1 user, 2 users, 3 users, 4 users, 5 users, 10 users and also unlimited users( wherever available) licenses respectively over floating license scheme. Prices unmentioned for any modules and any users’ scheme will be considered incomplete specification and hence
17 quotation may lose the benefit of quoted price for other modules etc. for that particular product. 2. All the modules must be quoted for supply with media and installation support for Windows 2003 Server, Linux Servers and Sun Solaris systems concurrently. License to number of users should not be restricted to any single platform (viz. any of the above mentioned operating systems) or any single machine alone, rather it can be used for the entire above mentioned OS platform and any number of client machine. However the use of number of license over a network at any time can be restricted to the number of license purchased using feasible technology of the software. 3. Installation should be free of cost .Necessary training, after sale support and warranty details must be quoted specifically. Tax and other charges as per applicable must be mentioned separately. 4. All the necessary documents, manuals (hard copy and soft copy both) and original edition of books (study materials) must be accompanied for each of the product modules. 5. If the quotation is given by original manufacturer or sole distributor or only authorized dealer then they must provide their sole authorization certificate as proof of their claim. 6. Apart from above mentioned details quotation providing prices of other new modules related to the product will be given preference. 7. If a newer/advanced version of the software is already launched in the market other than the above specified one at the time of quoting, then quotation for the newer/advanced version should also be additionally mentioned. If prices etc. for newer/advanced version are not quoted under the circumstances mentioned above, then the tender may lose the benefit of quoted price for the modules etc. for that particular product, if newer/advanced version is purchased. III. SPSS and Its Additional Tools
1. SPSS Version 15.0 – Full SPSS suite which combines the full SPSS Base product with no limitations, plus an additional 12 add-on modules for extended functionality. The add-on modules include: SPSS Advanced Models SPSS Regression Models SPSS Conjoint SPSS Categories SPSS Tables SPSS Trends SPSS Exact Tests SPSS Maps SPSS Complex Samples SPSS Missing Values SPSS Data Validation SPSS Classification Trees 2. Additional SPSS add-on modules SPSS Programmability Extension SPSS Data Preparation
18
3. SPSS stand-alone products Amos SPSS Text Analysis for Surveys SPSS Data Entry AnswerTree SmartViewer Web Server SamplePower DecisionTime and WhatIf? SmartViewer for Windows SPSS Web App Framework Dimensions 4. Licensing Type – Give details and prices for i) Enterprise Licensing The SPSS enterprise license which enables unlimited distribution of SPSS for Windows software. This includes site license and network license installations and one can customize each license by choosing any combination of SPSS add-on modules and platforms. ii) Other Licencing Options SPSS network license, SPSS consortia license , SPSS site license, SPSS network license, SPSS mobile computing solutions
Important specifications for SPSS1. Prices for each of the above mentioned products and their modules must be quoted for stand alone as well as floating license for all types of licensing options specified. Prices unmentioned for any modules will be considered incomplete specification and hence quotation may lose the benefit of quoted price for other modules etc. for that particular product. 2. All the modules must be quoted for supply with media and installation support for Windows NT/XP/2003 and also for Linux and Sun Solaris platforms if available. 3. Installation should be free of cost .Necessary training, after sale support and warranty details must be quoted specifically. Tax and other charges as per applicable must be mentioned separately. 4. All the necessary documents, manuals (hard copy and soft copy both) and original edition of books (study materials) must be accompanied for each of the product modules. 5. If the quotation is given by original manufacturer or sole distributor or only authorized dealer then they must provide their sole authorization certificate as proof of their claim. 6. Apart from above mentioned details quotation providing prices of other new modules related to the product will be given preference. 7. If a newer/advanced version of the software is already launched in the market other than the above specified one at the time of quoting, then quotation for the newer/advanced version should also be additionally mentioned. If prices etc. for newer/advanced version are not quoted under the circumstances mentioned above, then the tender may lose the benefit of quoted price if newer/advanced version is purchased. IV. ANTIVIRUS
19
1. Efficient and robust Antivirus, Anti spyware, Anti spamware for desktop and laptops with unlimited bulk license option is required which can detect and rectify dangerous Trojans and similar others without degrading the performance of the system. Moreover the license should not be any machine specific. 2. Demo of the product must be given and also detail specification with warranty, updating options etc. must be given exactly. 3. If the quotation is given by original manufacturer or sole distributor or only authorized dealer then they must provide their sole authorization certificate as proof of their claim.
Hardware Details:
1. IBM Data Storage – Type : Mobile External Hard Disk Size : Slim with firmware protection built in. Communication: Via USB port Power Connection: Via same USB port used for Communication 2. Laser Printer (HP) – Network ready laser printer 3. External DVD writer (Slim) – Make: IBM / HP Data Transfer : Min 24x from DVD and 52x from CD Communication : Via USB port 4. Automatic Slide Changer ( Both wired and Remote enabled) Specification: It should be able to work with Microsoft Power Point slides, .pdf files, .ps files in windows environment and also enables its functionality for Linux platform.
PART – II
Specifications for a Sun Server Processor
Processor : Up to two 1.8 GHz or 1.5GHz UltraSPARC IV+ processors Architecture : 64-bit, 4-way Superscalar SPARC V9, ECC Protected Processor modules : One or two dual processor/memory modules Cache per UltraSPARC IV+ processor: Level 1: 64-KB data and 64-KB instruction per pipeline Level 2: 2 MB shared on-chip
20 Level 3: 32 MB shared external
Main Memory
Main Memory : 4 GB ; Support up to 16 GB or higher; DIMM slots, DDR2 with Chipkill and DRAM Sparing, ECC registered DIMMs; Support for 512 MB, 1 GB, 2 GB, and 4 GB DIMMs
Standard Interfaces
Network I/O Serial Expansion capability : Two 10/100/1000 Mbps Ethernet : FC-AL disk controller : Two TIA/EIA-232-F (RJ45) Port, One TIA/EIA-232-F asynchronous (DB9) Port. : 1. Three PCI Express (PCIe) slots for low-profile cards (support x1, x4, and x8 width cards) 2. Two PCI-X slots, for 64-bit 133MHz lowprofile cards : One USB 1.1 port supporting speeds of 12 Mbps and four USB 2.0 ports supporting speeds of 480 Mbps. (two of them preferably in front) : 1 Graphics;1 VGA;1 Mouse;1 Keyboard : Optional Sun Crypto 500 Accelerator card, offering protocol acceleration via a daughter card
USB
Other Ports Security security
Mass Storage and Media
Host adapters drive) Internal disk : Internal IDE (supports DVD and/or DVD R/W : Up to four 73 GB 2.5 in., 10K RPM SAS disks, providing a maximum capacity of 292 GB; Internal hardware RAID 1 (mirroring) and RAID 0 (striping) supported. OR Up to two hot-swap Ultra160SCSI 73/146 GB disks. Mixing of drives is permitted in the following combinations: 1 x 73 GB and 146 GB. OR Up to 2 3.5" x 1.0" 15K-RPM FC-AL disks (146-GB capacity) providing a maximum total capacity of 292 GB : One slimline DVD-RW :
Internal DVD External Disk
21 - Sun StorageTek D240 - Sun StorageTek S1 - Sun StorageTek 3120 - Sun StorageTek 3310 SCSI RAID/JBOD - Sun StorageTek 3320 - Sun StorageTek 3510 FC RAID/JBOD - Sun StorageTek 3511 - Sun StorageTek 6140 Array - Sun StorageTek 6920 - Sun StorageTek 9910/9960/9970/9980 External Tape : - Sun StorageTek DAT 72 Tape Drive - Sun StorageTek Tape Drives, including SDLT 600, SDLT 320, LTO 1, LTO 2, LTO 3 - Sun StorageTek C2 Autoloader - Sun StorageTek C4 Tape Library - Sun StorageTek L100 Tape Library - Sun StorageTek L180 Tape Library - Sun StorageTek L25 Tape Library - Sun StorageTek L500 Tape Library - Sun StorageTek L700 Tape Library - Sun StorageTek L7 Autoloader - Sun StorageTek L8 Autoloader
Power Supplies
Power Supplies KVM switch : Two redundant, hot-swappable power supplies : 16 port KVM switch with related cables & accessories
Console
Console Display with keyboard and touchpad ( All Sun Make) : Slide IN and OUT type rack mountable 17’’TFT
Key RAS Features
- Hot-pluggable disk drives - Redundant, hot-swappable power supplies - Environmental monitoring and fault detection - Automatic System Recovery (ASR) capabilities - Remote Lights Out Management capability - Dual-loop enabled FC-AL subsystem - Support for disk and network multipathing with automatic failover capability - Error correction and parity checking for improved data integrity - Easy component replacement - Internal hardware drive mirroring (RAID 1) - RAID 0 , 1 to 5 support
22
Software for the sun System
Operating System : 64 bit Solaris 10 11/06 Operating System
Enterprise infrastructure software : 1. Sun Java Enterprise System >> Network Identity Services > Sun Java System Directory Server > Sun Java System Access manager > Sun Java System Directory Proxy Server >> Web and Application Services > Sun Java System Application Server Enterprise Edition > Sun Java System Message Queue Enterprise Edition > Sun Java System Web Server & Service Pack >> Portal Services > Sun Java System Portal Server > Sun Java System Portal Server Mobile Access > Sun Java System Portal Server Secure Remote Access Communication and Collaboration Services > Sun Java System Messaging Server > Sun Java System Calendar Server > Sun Java System Instant Messaging >> Availability Services > Sun Cluster > Sun Cluster Agents for Sun ONE Services (Web, App, Directory, Messaging and Calendar Servers and Message Queue) 2. Sun Management Center 3. Sun N1 System Manager 4. Cool Tools (includes CoolTuner, Sun Studio 11, GCC for SPARC systems) 5. FORTRAN, C, C++ compilers with parallel support for SPARC system.
C. specifications of Hardware and networking items for Computer Centre
Rack Mount Server 1A: Dual Core Intel Xeon Processor Item Processor Max. Processor Support Front Side Bus Speed Memory Graphics Optical Drive Specification Single Dual-Core Intel Xeon Processor 3.0 GHz or higher with 4MB L2 Cache (2MB*2) Two 1066 MHz FSB or higher 4GB PC2-5300 DDR2 Fully Buffered DIMM 667MHz Integrated Graphics with 16MB VRAM(Non-Shared) DVD Writer
23
DIMM Slots Hard Disk Total Hotswap Disk bays Disk Redundancy Network Form Factor Slots Ports Power Supply Mounting Hardware OS Compatibility Warranty 8(Min) 4*146 GB 15K RPM Hot Swap SAS/SCSI HDD 6(Min) Hardware RAID-0, RAID-1 & RAID-10 Support 2 * 10/100/1000 Auto-sensing Integrated Ethernet 2U to 4U Rack Mount 4 PCI-Express Slots 2*PS/2, 4*USB 2.0, 2*SVGA, 1*9-Pin Serial, 1*Parallel, 2*RJ45, 1 SAS/SCSI External-Interface, 1*Keyboard,1*Mouse 1+1 Redundant Hot Plug SMPS (230V AC) Rack Mounting Hardware & accessories Windows 2000/2003 Server, RHEL 3.0 or Higher 3 years comprehensive onsite warranty from the date of commissining
Optional Items to be quoted separately along with the base system
A B C D
Processor Memory Harddisk Console
Additional one processor for dual processor configuration as per the base system Additional 2GB DIMM(as per the base specs.) Additional 146GB Hardisk(as per the base specs.) Console with Display, Keyboard and Pointing Device with rack mounting option
E F G H
Rack 42U Rack 22U KVM Switch Operating System
42 U Rack with Fan, Power panel, Trays, Cable Manager, Mounting Hardware, Server Mount Rails for 2 servers, Castors, etc. 22U or 20U Rack with Fan, Power panel, Trays, Cable Manager, Mounting Hardware, Server Mount Rails, Castors, etc. 8 Port KVM Switch With Related Cables and Accessories 1. Windows 2003 Server 20 User with Media & Licenses 2. Redhat Enterprise Linux 4.0 ES 3. Redhat Enterprise Linux 4.0 AS 1. Norton/Symantec Antivirus for Win2003 Server 2. Bitdefender Antivirus for SAMBA File Server RHEL ES/AS
I
Antivirus
1B. Single Core Xeon Processor Item Processor Max. Processor Support Front Side Bus Speed Memory Graphics Optical Drive DIMM Slots Hard Disk Total Hotswap Disk bays Disk Redundancy Network Form Factor Slots Ports Specification Single Intel Xeon Processor 3.0 GHz or higher with 2MB L2 Cache Two 800 MHz FSB or higher 2GB DDR2 DIMM 400MHz Integrated Graphics with 8MB VRAM(Non-Shared) DVD Writer 6(Min) 2*146 GB 10K RPM Hot Swap SAS/SCSI HDD 6(Min) Hardware RAID-0 & RAID-1 Support 2 * 10/100/1000 Auto-sensing Integrated Ethernet 2U to 4U Rack Mount 2 PCI-Express and 2 PCI 2*PS/2, 4*USB 2.0, 2*SVGA, 1*9-Pin Serial, 1*Parallel, 2*RJ45, 1 SAS/SCSI External-Interface, 1*Keyboard,1*Mouse
24
Power Supply Mounting Hardware OS Compatibility Warranty 1+1 Redundant Hot Plug SMPS (230V AC) Rack Mounting Hardware & accessories Windows 2000/2003 Server, RHEL 3.0 or Higher 3 years comprehensive onsite warranty from the date of commissining
Optional Items to be quoted separately along with the base system
A B C D
Processor Memory Harddisk Console
Additional one processor for dual processor configuration as per the base system Additional 2GB DIMM(as per the base specs.) Additional 146GB Hardisk(as per the base specs.) Console with Display, Keyboard and Pointing Device with rack mounting option
E F G H
Rack 42U Rack 22U KVM Switch Operating System
42 U Rack with Fan, Power panel, Trays, Cable Manager, Mounting Hardware, Server Mount Rails for 2 servers, Castors, etc. 22U or 20U Rack with Fan, Power panel, Trays, Cable Manager, Mounting Hardware, Server Mount Rails, Castors, etc. 8 Port KVM Switch With Related Cables and Accessories 1. Windows 2003 Server 20 User with Media & Licenses 2. Redhat Enterprise Linux 4.0 ES 3. Redhat Enterprise Linux 4.0 AS 1. Norton/Symantec Antivirus for Win2003 Server 2. Bitdefender Antivirus for SAMBA File Server RHEL ES/AS
I
Antivirus
Tower Server
2A: Dual Core Intel Xeon Processor Item Processor Max. Processor Support Front Side Bus Speed Memory Graphics Optical Drive DIMM Slots Hard Disk Total Hotswap Disk bays Disk Redundancy Network Form Factor Slots Ports Power Supply Monitor Keyboard Mouse OS Compatibility Warranty Specification Single Dual-Core Intel Xeon Processor 3.0 GHz or higher with 4MB L2 Cache (2MB*2) Two 1066 MHz FSB or higher 4GB PC2-5300 DDR2 Fully Buffered DIMM 667MHz Integrated Graphics with 16MB VRAM(Non-Shared) DVD Writer 8(Min) 4*146 GB 15K RPM Hot Swap SAS/SCSI HDD 6(Min) Hardware RAID-0, RAID-1 & RAID-10 Support 2 * 10/100/1000 Auto-sensing Integrated Ethernet TOWER 4 PCI-Express Slots 2*PS/2, 4*USB 2.0, 2*SVGA, 1*9-Pin Serial, 1*Parallel, 2*RJ45, 1 SAS/SCSI External-Interface, 1*Keyboard,1*Mouse 1+1 Redundant Hot Plug SMPS (230V AC) 17" LCD Monitor(Same Make as that of server) US Standard Keyboard Optical Scroll Mouse with pad Windows 2000/2003 Server, RHEL 3.0 or Higher 3 years comprehensive onsite warranty from the date of commissining
25
Optional Items to be quoted separately along with the base system
Additional one processor for dual processor configuration as per the base system A Processor
B C D
Memory Harddisk Operating System
Additional 2GB DIMM(as per the base specs.) Additional 146GB Hardisk(as per the base specs.) 1. Windows 2003 Server 20 User with Media & Licenses
E
Antivirus
2. Redhat Enterprise Linux 4.0 ES 3. Redhat Enterprise Linux 4.0 AS 1. Norton/Symantec Antivirus for Win2003 Server 2. Bitdefender Antivirus for SAMBA File Server RHEL ES/AS
2B. Single Core Xeon Processor Item Processor Max. Processor Support Front Side Bus Speed Memory Graphics Optical Drive DIMM Slots Hard Disk Total Hotswap Disk bays Disk Redundancy Network Form Factor Slots Ports Power Supply Monitor Keyboard Mouse OS Compatibility Warranty Specification Single Intel Xeon Processor 3.0 GHz or higher with 2MB L2 Cache Two 800 MHz FSB or higher 2GB DDR2 DIMM 400MHz Integrated Graphics with 8MB VRAM(Non-Shared) DVD Writer 6(Min) 2*146 GB 10K RPM Hot Swap SAS/SCSI HDD 6(Min) Hardware RAID-0 & RAID-1 Support 2 * 10/100/1000 Auto-sensing Integrated Ethernet TOWER 2 PCI-Express and 2 PCI 2*PS/2, 4*USB 2.0, 2*SVGA, 1*9-Pin Serial, 1*Parallel, 2*RJ45, 1 SAS/SCSI External-Interface, 1*Keyboard,1*Mouse 1+1 Redundant Hot Plug SMPS (230V AC) 17" LCD Monitor(Same Make as that of server) US Standard Keyboard Optical Scroll Mouse with pad Windows 2000/2003 Server, RHEL 3.0 or Higher 3 years comprehensive onsite warranty from the date of commissining
Optional Items to be quoted separately along with the base system
Additional one processor for dual processor configuration as per the base system A Processor
B C D
Memory Harddisk Operating System
Additional 2GB DIMM(as per the base specs.) Additional 146GB Hardisk(as per the base specs.) 1. Windows 2003 Server 20 User with Media & Licenses
26
E CD/ DVD Storage Server SN 1 Item CD-DVD Storage Server Specification -Capacity to hold 1000+ CDs or DVDs -Software to automatically index the loaded CD/ DVDs - Web Based Access to CD/DVD Volumes to the 25 network users simultaneously - Suitable for Digital Libraries - One year warranty 2 CD-DVD Image Storage Server - Hard Disk Space to hold 1000+ CD or DVD Volumes - Software to automatically index the recorded CD/ DVDs Volumes -- Easy CD/DVD Copy and transfer to server - Web Based Access to CD/DVD Volumes to the 25 network users simultaneously - Suitable for Digital Libraries - One year warranty Antivirus 2. Redhat Enterprise Linux 4.0 ES 3. Redhat Enterprise Linux 4.0 AS 1. Norton/Symantec Antivirus for Win2003 Server 2. Bitdefender Antivirus for SAMBA File Server RHEL ES/AS
Personal Computer 1- Personal Computer with Intel Core 2 Duo Item Microprocessor Mother Board Memory Graphics Drives Display Keyboard Mouse Optical Drive Audio Ports Slots Cabinet Network Compatibility Warranty Softwares Specification Intel Core 2 Duo Intel 945G chipset or Better Motherboard 512MB 400MHz DDR2 RAM Integrated Graphics with DVMT 3.0 80GB SATA HDD(7200RPM) 1.44MB FDD 15" LCD Monitor US- Standard Keyboard with Hand-rest Optical Scroll Mouse with Pad DVD-CDRW Combo Drive Embedded Audio Ports: 6 USB Ports(2 in front), 1 Serial, 1 Parallel, 1 PS/2 Keyboad and 1 PS/2 Mouse Port Two PCI slots, One PCI Express X4 slot , One PCI Express X16 Mini Tower 10/100/1000 on board integrated ethernet port Windows and Linux Compatible 3 years comprehensive onsite warranty from the date of commissining Windows XP Professional SP2 preloaded with media and certificate of authenticity Norton Antivirus with 1 year subscription Energy Star qualified, Screen Blanking, Hard Disk and System Idle Mode in Power On, Set up Password, Power Supply SMPS Surge Protected Win Logo for Windows OS and Linux Certifications
Power Management OS Certifications Options A B C
17" LCD in lieu of 15" 1GB Memory in lieu of 512MB Windows Vista in lieu of Windows XP Pro SP2
27
D E 800W PMPO Speaker Set Microphone with Stand
2: Personal Computer with Intel Pentium 4 Dual Core Item Specification Microprocessor Intel Pentium Dual Core 2.8 Ghz or higher, EM64T, 2 X 1 MB L2 cache, 800 Mhz FSB Mother Board Memory Graphics Drives Display Keyboard Mouse Optical Drive Audio Ports Slots Cabinet Network Compatibility Warranty Softwares Intel 945G chipset or Better Motherboard 512MB 400MHz DDR2 RAM Integrated Graphics with DVMT 3.0 80GB SATA HDD(7200RPM) 1.44MB FDD 15" LCD Monitor US- Standard Keyboard with Hand-rest Optical Scroll Mouse with Pad DVD-CDRW Combo Drive Embedded Audio Ports: 6 USB Ports(2 in front), 1 Serial, 1 Parallel, 1 PS/2 Keyboad and 1 PS/2 Mouse Port Two PCI slots, One PCI Express X4 slot , One PCI Express X16 Mini Tower 10/100/1000 on board integrated ethernet port Windows and Linux Compatible 3 years comprehensive onsite warranty from the date of commissining Windows XP Professional SP2 preloaded with media and certificate of authenticity Norton Antivirus with 1 year subscription Energy Star qualified, Screen Blanking, Hard Disk and System Idle Mode in Power On, Set up Password, Power Supply SMPS Surge Protected Win Logo for Windows OS and Linux Certifications
Power Management OS Certifications Options A B C D E
17" LCD in lieu of 15" 1GB Memory in lieu of 512MB Windows Vista in lieu of Windows XP Pro SP2 800W PMPO Speaker Set Microphone with Stand
Laptop 1 Laptop PC with Intel Core 2 Duo Processor Processor Intel Core 2 Duo T5500 with Intel Centrino Duo Mobile Technology Motherboard Mobile Intel 945GM Express or equivalent chipset Wireless 802.11a/b/g compatiple integrated wireless adapter RAM 512MB PC2-5300/667MHz Display 15" TFT Antiglare Display Graphics Integrated 3D graphics Intel GMA 950 with shared memory Harddisk 60GB(Min)Hard Disk Drive (5400 RPM) Optical Drive 8X Double Layer DVD Writer Battery 6 Cell Lithium Ion Battery Pointing Device Touch Pad Modem Integrated 56K Modem Network Interface Integrated 10/100/1000 Base-TX Ethernet Ports 2*USB 2.0, 1*SVGA, 1* RJ45, 1*RJ11, 1*IEEE 1394, 1*Stereo Headphone, 1*Mic Additional Features Integrated Bluetooth & Card Reader Slots 1 Type I / Type II PC Card slot Carry Case Leather Carry Case Softwares 1. Windows XP Professional SP2 preloaded with media and certificate of authenticity
28
Warranty 2 2. Norton Internet Security (Latest) with media & License 3. Complete Driver Set with media Three years comprehensive onsite warranty from the date of commissining
Laptop PC with Intel Core Duo Processor Processor Intel Core Duo T2500 with Intel Centrino Duo Mobile Technology Motherboard Wireless RAM Display Graphics Harddisk Optical Drive Battery Pointing Device Modem Network Interface Ports Additional Features Slots Carry Case Softwares Mobile Intel 945GM Express or equivalent chipset 802.11a/b/g compatiple integrated wireless adapter 512MB DDR2 533MHz Memory 15" TFT Antiglare Display Integrated 3D graphics Intel GMA 950 with shared memory 60GB(Min)Hard Disk Drive (5400 RPM) DVD CDWriter Combo 6 Cell Lithium Ion Battery Touch Pad Integrated 56K Modem Integrated 10/100/1000 Ethernet 2*USB 2.0, 1*SVGA, 1* RJ45, 1*RJ11 Integrated Bluetooth & Card Reader 1 Type I or 1 Type II PC Card slot Leather Carry Case 1. Windows XP Professional SP2 preloaded with media and certificate of authenticity 2. Norton Internet Security (Latest) with media & License 3. Complete Driver Set with media Three years comprehensive onsite warranty from the date of commissining
Warranty 3
Laptop PC with Intel Celeron M Processor Processor Intel Celeron M Processor 420 (1.60GHz, 1MB L2 Cache, 533MHz) Motherboard Mobile Intel 945GM Express or equivalent chipset Wireless 802.11a/b/g compatiple integrated wireless adapter RAM 512MB DDR2 533MHz Memory Display 15" XGA TFT LCD Antiglare Display Graphics Integrated 3D graphics Intel GMA 950 with shared memory Harddisk 60GB(Min)Hard Disk Drive (5400 RPM) Optical Drive 8X Double Layer DVD Writer Battery 6 Cell Lithium Ion Battery Modem Integrated 56K Modem Network Interface Integrated 10/100/1000 Ethernet Ports 2*USB 2.0, 1*SVGA, 1* RJ45, 1*RJ11 Additional Features Bluetooth & Card Reader Slots 1 Type I or 1 Type II PC Card slot Carry Case Leather Carry Case Softwares 1. Windows XP Professional SP2 preloaded with media and certificate of authenticity 2. Norton Internet Security (Latest) with media & License 3. Drivers with media Warranty Three years comprehensive onsite warranty from the date of commissining
Structured Cable Network (All items should be of single make except item Nos. 16,17,18 and 19) SNo 1 2 3 4 5 6 7 8 Item UTP Cat 5e Cable Per 300Mtr UTP Cat 6 Cable Per 300Mtr OFC Cable Per Mtr OFC LIU ST-ST Coupler ST Connector SC-ST MM Duplex Patch Cord ST-ST MM Duplex Patch Cord Specification
6 Core MM/62.5 Micron For housing 12Nos Fibre Termination
2 Mtr 2 Mtr
29
9 10 11 12 13 14 15 16 SC-SC MM Duplex Patch Cord Patch Cord UTP Patch Cord UTP Patch Cord UTP Information Outlet(I/O) I/O Surface Mount Box Patch Panel Floor Mount 19" Rack along with standard fittings:Front Glass Door, Cable Channel, Castors, Fan, Power Distribution Panels, Mouting Hardwares, etc. Floor Mount 19" Rack along with standard fittings:Front Glass Door, Cable Channel, Castors, Fan, Power Distribution Panels, Mouting Hardwares, etc. Wall Mount 19" Rack along with standard fittings:Front Glass Door, Cable Channel, Fan, Power Distribution Panels, Mouting Hardwares, etc. Wall Mount 19" Rack along with standard fittings:Front Glass Door, Cable Channel, Fan, Power Distribution Panels, Mouting Hardwares, etc. 2 Mtr 1 Mtr (Different Colour Option required) 2 Mtr (Different Colour Option required) 3 Mtr (Different Colour Option required)
24 Port Size: 42 U
17
Size: 20U or 22 U
18
Size: 10U/12U
19
Size: 7U or 8U
Structured Cable Network Services SNo 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Item Patch Panel Fitting Per unit I/O Termination Per Unit OFC Cable Termination Per Core LIU Fixing Under Ground Laying for OFC Under Ground Laying for OFC Under Ground Laying for UTP Under Ground Laying for UTP Indoor OFC Laying Per Mtr Indoor UTP Laying Per Mtr Documentation Charges below 100 nodes Documentation Charges for 101-300 nodes Documentation Charges for 301-500 nodes Documentation Charges for 501-700 nodes Using G.I. Pipes, 3' Trench, Sand Filling, Brick Layering, Route Marking Per 25 Mtrs Using PLB-HDPE Pipes, 3' Trench, Sand Filling, Brick Layering, Route Marking Per 25 Mtrs Using G.I. Pipes, 3' Trech, Sand Filling, Brick Layering, Route Marking Per 25 Mtrs Using PLB-HDPE Pipes, 3' Trench, Sand Filling, Brick Layering, Route Marking Per 25 Mtrs Including Supply of Casing Caping Including Supply of Casing Caping Specification
Wireless Networking SN Item All make Dlink 1 Outdoor Access Point
Specification Make:Dlink/ 54Mbps or Higher/ with built-in antenna/ External Antenna Provision/ Power over Ethernet(PoE)/ Routing Bridging Capability/ DHCP/ Manual and auto speed select/ atmospheric shield cabinet/ Mounting Hardwares Make:Dlink/ 54Mbps or Higher/ with built-in antenna/ External Antenna Provision/ Power over Ethernet(PoE)(optional) /DHCP/ Manual and auto speed select/ Wall or ceiling mountable/ Mounting Hardwares Make:Dlink, 8dB, compatible with above access points Make: Dlink, 15dB compatible with above access points Make:Dlink, 8dB, compatible with above access points Make:Dlink, 15dB , compatible with above access points
2
Indoor Access Point
3A 3B 4A 4B
Omni-Directional Antenna Directional Antenna
30
5 6 7 8 PCI Wireless Network Adapter USB Wireless Network Adapter All make CISCO Notebook Wireless Network Adapter Outdoor Access Point Make:Dlink, 54Mbps or higher, 802.11b/g compatible Make:Dlink, 54Mbps or higher, 802.11b/g compatible Make:Dlink, 54Mbps or higher, 802.11b/g compatible Make:Cisco/ 54Mbps or Higher/ with built-in antenna/ External Antenna Provision/ Power over Ethernet(PoE)/ Routing Bridging Capability/ DHCP/ Manual and auto speed select/ atmospheric shield cabinet/ Mounting Hardwares Make:Cisco/ 54Mbps or Higher/ with built-in antenna/ External Antenna Provision/ Power over Ethernet(PoE)(optional) /DHCP/ Manual and auto speed select/ Wall or ceiling mountable/ Mounting Hardwares Make:Cisco, 8dB, compatible with above access points Make:Cisco, 15dB compatible with above access points Make:Cisco, 8dB, compatible with above access points Make:Cisco, 15dB , compatible with above access points Make:Cisco, 54Mbps or higher, 802.11b/g compatible Make:Cisco, 54Mbps or higher, 802.11b/g compatible Make:Cisco, 54Mbps or higher, 802.11b/g compatible
9
Indoor Access Point
10A 10B 11A 11B 12 13 14
Omni-Directional Antenna Directional Antenna PCI Wireless Network Adapter USB Wireless Network Adapter Notebook Wireless Network Adapter
Wireless Networking (Services) SNo Item 1A 1B Charges for Fixing & Testing Outdoor Wireless Access Point over Roof-top Charges for Fixing & Testing Outdoor Wireless Access Point over G.I. Mast
Specification Roof-top mounting using 10 feet(1") G.I. Pipe like lightning arrestor. Materials supply, fabrication and civil works if any to be done by the party. At 50' height from ground using G.I. Mast and supported by G.I. tension wires. Mast Base should have min. diametre 2" and top 1". Adequate foundation work to be done to support the base of the G.I. mast. Materials supply, fabrication and civil works to be done by the party. Indoor Access fixed using provided clamps over indoor wall. Indoor Access fixed using provided clamps under indoor ceiling. 5Amp Socket with Switch in 4"x4" white sunmica board to be fixed at the site of wireless installations. with 3 single (Phase, Neutral, Earth) 2.5mm sq. insulated copper wire including cap-on-casing wiring from nearest distribution point per metre Standard Copper Earth for outdoor access point, including connection to the Access Point from the Earth Pit(50 Feet Approx.) with 2.5 mmsq. multistrand copper wire with proper routing through building wall. 1' x 1' Brick Foundation to be done around the earth pit
1C 1D 2 3 4
Charges for Wall Fixing & Testing Indoor Access Point Charges for Ceiling Fixing & Testing Indoor Access Point Electical Outlet Fixing(excluding wiring) Electrical Wiring to the Electrical Outlets Earthing Job for outdoor Access Point
Online UPS Systems UPS Rating(Refer Tech. Specification below) 1.a b c d 2.a b c d 3.a b c 1 KVA Online UPS with 30Min Backup 1 KVA Online UPS with 1Hr. Backup 1 KVA Online UPS with 2Hr. Backup 1 KVA Online UPS with 3Hr. Backup 2 KVA Online UPS with 30Min Backup 2 KVA Online UPS with 1Hr. Backup 2 KVA Online UPS with 2Hr. Backup 2 KVA Online UPS with 3Hr. Backup 3 KVA Online UPS with 30Min Backup 3 KVA Online UPS with 1Hr. Backup 3 KVA Online UPS with 2Hr. Backup
Min. VAH Rating 750 1500 3000 4500 1500 3000 6000 9000 1870 3740 7200
31
d 4.a b c d 5.a b c d 6.a b c d 7.a b c d A. 3 KVA Online UPS with 3Hr. Backup 5 KVA Online UPS with 30Min Backup 5 KVA Online UPS with 1Hr. Backup 5 KVA Online UPS with 2Hr. Backup 5 KVA Online UPS with 3Hr. Backup 6 KVA Online UPS with 30Min Backup 6 KVA Online UPS with 1Hr. Backup 6 KVA Online UPS with 2Hr. Backup 6 KVA Online UPS with 3Hr. Backup 7.5 KVA Online UPS with 30Min Backup 7.5 KVA Online UPS with 1Hr. Backup 7.5 KVA Online UPS with 2Hr. Backup 7.5 KVA Online UPS with 3Hr. Backup 10 KVA Online UPS with 30Min Backup 10 KVA Online UPS with 1Hr. Backup 10 KVA Online UPS with 2Hr. Backup 10 KVA Online UPS with 3Hr. Backup 10900 4300 7050 11760 16800 4600 7560 12600 18000 4990 9360 15120 33600 7500 11700 19200 33600
Technical Specifications for On-Line UPS 1 KVA - 3 KVA Technology True On-Line Double Conversion Architecture with Microprocessor Controlled IGBT-PWM Technology UPS rated Power (VA) / (KW) 1 KVA/700W, 2KVA/1400W, 3KVA/2100 W Input Input Voltage Input Power Factor Input Frequency Output Output Voltage Static Regulation Harmonic Distortion Overload Output Frequency Output Power Factor Efficiency Battery Criteria Type & Make Back-up time SMF (Sealed Maintenance Free) Lead Acid type of either EXIDE/ QUANTA / UPLUS makes The system must be capable of providing user configurable backup time at full load as per VAH chart(see above). Total number of batteries, Voltage, Ampere-Hour rating of each battery offered should be clearly mentioned. Total Volt-Ampere-Hour rating of the Battery Bank Offered should be clearly mentioned. Static & Manual Bypass Less than 47 dB at 1 meter from the machine LED/LCD indication for Normal, Battery, Fault, Bypass, Battery, Load, etc. Certification A) ISO 9001 B) ISO 14001(Certification copies should be enclosed) 200/208/220/240 V AC, 1 phase, Selectable +/- 2% < 3% There should be mechanism to sustain overload conditions upto 150% 50 Hz + / - 0.05 Hz (free running) 0.7 Better than 90% 175 – 280 V AC, 1 Phase (at full load) 130 – 280 V AC, 1 Phase (50% - 100% linear de-rating) 0.97 50 Hz +/- 5 Hz
Bypass Facility Audible Noise Indication
32
B. Technical Specifications for On-Line UPS 5 KVA - 10 KVA Technology True On-Line Double Conversion architecture with IGBT based High Frequency PWM technology UPS rated Power (VA) / (KW) 5 KVA/4000W, 6KVA/4800W, 7.5KVA/6000W, 10KVA/8000W Input AC Input Voltage Range 230 V AC, 1-Phase -20 % +15% Input Frequency Output AC Output Voltage Output Voltage Stability Output Frequency Output Waveform Output Power Factor Efficiency Overload Crest Factor Harmonic Distortion Transient Recovery Isolation Transformer Self Test & Diagnostic Features for: 230 V AC, 1 – Phase 1% for DC Input & Output Load Variations 50 Hz 0.05 Hz Sinusoidal (Sine Wave Output) 0.8 Better than 92% There should be mechanism to sustain overload conditions upto 150% Better than 4 : 1 Less than 3% Within 3 Cycles Output should be fully isolated by double conversion and isolation transformer(mandatory) Noise Level Indications & Audible Alarms: Auto-Restart Facility Battery Over Voltage Battery Under voltage Output AC Over Voltage 50 Hz 10%
Output Short Circuit / Overload Less than 55 dB at 1 meter from the machine Mains On, Inverter On, Overload, Load On Mains, Load On Battery, Battery Low, etc The UPS should automatically restart, upon restoration of mains supply, after the UPS has shut down due to low battery condition (due to an extended power failure) without any user intervention.
Digital Metering Battery Criteria Type & Make Back-up time
LCD display for measurement of AC Voltage, Battery Voltage, Load Current, Output Frequency.
SMF (Sealed Maintenance Free) Lead Acid type of either EXIDE/ QUANTA / UPLUS makes The system must be capable of providing user configurable backup time at full load as per VAH chart(see above). Total number of batteries, Voltage, Ampere-Hour rating of each battery offered should be clearly mentioned. Total Volt-Ampere-Hour rating of the Battery Bank Offered should be clearly mentioned. A) ISO 9001 B) ISO 14001(Certification copies should be enclosed)
Certification
Offline UPS Systems SN Item 1 600VA 2 3 4 600VA 1000VA 2000VA
Specification Offline/ Line Interactive type, No load shutdown, 20 Min. Backup, Battery Make to be specified Offline/ Line Interactive type, No load shutdown, 40 Min. Backup, Battery Make to be specified Offline/ Line Interactive type, No load shutdown, 20 Min. Backup, Battery Make to be specified Offline/ Line Interactive type, No load shutdown, 20 Min. Backup, Battery Make to be specified
33 Software:
Item SPSS Clementine for Windows Autodesk AutoCAD 2007 for Windows Adobe Macromedia Director MX 2004 for Windows Visual Paradigm for UML for Windows Aristo Visual Case for Windows Oracle 10g Oracle 10g Database Standard One Edition for Windows Oracle 10g Database Standard Edition for Windows Oracle 10g Database Enterprise Edition for Windows Internet Developer Suite for Oracle 10g Oracle 10g Application Server Standard One Edition Oracle 10g Application Server Standard Edition Oracle 10g Application Server Enterprise Edition License Upgradation Oracle 10g Database Server Upgradation Specification Academic Edition, Single user license, 5-user license, 10-user license Academic Edition, Single user license, 5-user license, 10-user license Academic Edition, Single user license, 5-user license, 10-user license Academic Edition, Single user license, 5-user license, 10-user license Academic Edition, Single user license, 5-user license, 10-user license Academic Edition, 5-named user license, 10-named user license, 20-named user, single processor licensing Academic Edition, 5-named user license, 10-named user license, 20-named user, single processor licensing Academic Edition, 5-named user license, 10-named user license, 20-named user, single processor licensing Academic Edition, Single user license, 5-user license, 10-user license Academic Edition, 5-named user license, 10-named user license, 20-named user, single processor licensing Academic Edition, 5-named user license, 10-named user license, 20-named user, single processor licensing Academic Edition, 5-named user license, 10-named user license, 20-named user, single processor licensing Additional amount for Standard Edition 10-user to Enterprise Edition-10-user Additional Enterprise Edition license per user Additional amount for Standard Edition 10-user to Enterprise Edition-10-user Additional Enterprise Edition license per user Additional amount for Java-Based Single user to Non-Java based Single User
Oracle 10g Application Server Upgradation
Internet Developer Suite for Oracle 10g ugradation
Note1: The cost of software items should include Media, License and Support for one year Note2: Add-on packages,if any, along with the base package should also be quoted. Note3: Other licensing option(s), if any, may also be quoted
D. Specifications for equipment for Department of Computer Science & Engineering Laboratory Equipment List
1.
Embedded System Lab based on 8051 Microcontroller
Software: I. MicroTutor’51 (10 user shared network license) II. Class Room Learning Resource Modules for 8051 (10 user shared network license) III. 8051 Simulator (10 user shared network license) IV. 8051 C-Cross Compiler (1 user shared network license)
34
V. 8051 Visual Program Builder (10 user shared network license) VI. MicroTutor’C (10 user shared network license ) Hardware: I. II. III. IV. V. VI. VII. VIII. IX. X. XI. XII. XIII. 8051 Educational Practice Board-EPB (10 units) LED interfacing Kit/Traffic Light controller Kit (1 unit) 7-Segment/Martix keyboard interfacing Kit (1 unit) LCD/Matrix Keyboard interfacing Kit (1 unit) RTC-EEPROM interfacing Kit (1 unit) DAC interfacing Kit (1 unit) Stepper Motor interfacing Kit (1 unit) Relay interfacing Kit (1 unit) 8-Bit Parallel ADC interfacing Kit (1 unit) 12-bit Serial ADC interfacing Kit (1 unit) I/O Expansion system (1 unit) I2C Protocol demonstration Kit (1 unit) General Purpose Project Card for 8051 (10 units)
Workbooks (1 set) 2. Embedded System Lab based on 32 Bit ARM Processor Consisting of: I. IDE for ARM7 platform (C-cross compiler, linker, assembler, project management facility) (10 users) II. Educational Practice Board for ARM-7 LPC2148 based (10 Nos.) III. LCD Keyboard Interfacing Kit (5 Nos.) IV. General Purpose I/O Interfacing Kit (5 Nos.) V. 7-Segment Interfacing Kit (1 No.) VI. Stepper Motor Interfacing Kit (1 No.) VII. Relay Interfacing Kit (1 No.) VIII. 320x240 Graphic LCD Interfacing Kit (1 No.) IX. Touch Screen Interfacing Kit (1 No.) X. GSM modem Interfacing Kit (1 No.) XI. Finger Print interfacing Kit (1 No.) XII. RF Development Kit (2 Nos.) XIII. Workbook (1 copy) Other Features: I. IDE with GNU C-cross compiler, linker, assembler, project management facility, Library option for fast development, built-in support for FREERTOS/uCOS binaries II. 10 units of Educational Practice Board focusing 16/32 bit LPC2148 CPU from
35
Philips with on-chip 512KB flash memory & 32Kb RAM, In system programming facility, availability of all I/O ports, on-Chip ADC, DAC & RTC, expansion headers for GPIO, SPI, I2C, interrupt signals, JTAG connector, USB (Optional) interface, Flash download utility etc RTOS port for LPC 2148 enabling demonstration of RTOS based experimentation Set of 10 interfacing kits for LED, Key, LCD, Matrix keyboard, 7-segment LED, Stepper Motor, Graphic LCD (320X240), Relay, MOSFET, Finger Print Sensor, GSM Modem, Touch Screen, RF Development kit etc Workbook on basic ARM concepts, programming techniques, basic laboratory programming, Real-time programming examples, interfacing cases etc. Separate workbook for RTOS based programs
III. IV.
V. VI.
3.
100 MHz, 2+16 Channel Mixed Signal Oscilloscope
Specifications:
Simultaneous viewing of Analog and Digital operations i.e Analog signal operations and Digital Logic timings analysis simultaneously on a screen. ii) Integration of Oscilloscope and Logic Analysis system. iii) Deep Memory to capture long events at high sampling speeds and Deep Memory transfer over interface bus. iv) Save and Recall feature. v) Auto store feature for infinite persistence of waveforms. vi) Automatic Parametric Measurement facility. vii) Built in help System . DETAILED TECHNICAL SPECIFICATIONS :1. OSCILLOSCOPE ( Vertical System ) a) b) c) d) NO. OF CHANNELS : 2 BANDWIDTH : 100 MHz. MAXIMUM INPUT : 400 V (peak ac + dc) VERTICAL SYSTEM ACCURACY : +/- 2.0 % i)
2. LOGIC CHANNELS (Vertical System) : a) NO. OF CHANNELS : 16
3. HORIZONTAL SYSTEM ( SCOPE & LOGIC CH.) : a) TIMEBASE RANGE : 2 nsec. to 50 sec/div Main & Delayed. b) HORIZONTAL SYSTEM ACCURACY: +/- 0.001 % c) TRIGGER SYSTEM : Edge, Pulse Width, Pattern, Duration, TV, Sequence , I 2 C , USB , SPI , CAN etc. 4. OSCILLOSCOPE ACQUISITION SYSTEM : a) Maxm. SAMPLING RATE : 2 GSa/s on each channel. b) Maxm. MEMORY DEPTH : 1 Mpts. Standard with option for upgrade . 5.LOGIC ACQUISITION SYSTEM : a) MAXIMUM SAMPLING RATE : 2 GSa/s on each channel . b) DISPLAY UPDATE RATE : Upto 100,000 waveforms / sec in real time mode. c) MEMORY DEPTH : 1 Mpts 6. DISPLAY SYSTEM : 6.3 inch Colour TFT LCD. High Definition XGA ( 1024*768 ) colour Display with 256 intensity
36
levels. 7. BUILT IN INTERFACE : USB 2.0 high speed device,Two USB 1.1 Ports,10/100 baseT LAN ,GPIB
4.
34 Channel, 800MHz timing, 200 MHz state, 512K depth PC Hosted Logic Analyzer Technical specifications: Window based user interface i.e. perform all operations from the main screen like WORD or EXCEL applications. Analysis should be of State, Timing and Transitional timing. Trigger sequences with graphical representation. Advanced triggering capability like Number of Edges, Edge and Pattern etc. Glitch Capture on all channels. PC hosted in nature through an interface with IEEE 1394 port with PC. Should be supplied with IEEE 1394 PCI Card and Cable. DETAILED TECHNICAL SPECIFICATIONS: a) No. of Channels : 34 b) State Analysis i) State Speed : 200 MHz. ii) State memory Depth : 256 kb iii) Minimum State Clock Pulse width : 1.2 n sec. iv) State Clock / Qualifiers : 2 v) Set up / Hold time : 2 nsec to 4.5 nsec. c) Timing Analysis i) Timing Speed : 400 MHz. On full channels ii) Timing Memory Depth : 512 kB on full channels . iii) Triggering Sequencer speed : 200 MHz. iv) Triggering range width : 32 bits v) Trigger Sequence levels : 16 d) Probes : 100 k ohms || 1.5 pf e) Maxm. Input voltage : +/- 40 Volt peak f) Minm. Voltage swing : 500 mV pk-pk. Accessories : E5383A 17 channel single ended flying leads connects to 40 pin LA cable : (2 Nos.)
E. Specifications of equipments/ components required for Dept. of Physics for M.Sc (Nanosci. and Tech.) programme
Components
High Energy Laser Focusing Lens
Quantity
2
Specification
Diameter 25mm (approx.), focal length 400mm (approx.), with AR coating. To be used specially for Nd-YAG laser (25mJ/ns).
37
1 Wave length range 523nm - 532nm , transmission 50/50, Laser type 2 harmonic Nd, damage threshold (pulsed) 1.5J/cm2 in one nanosecond , with ultra hard coating, dia = 25mm, thickness = 6mm. Wave length range 523nm - 532nm , transmission 60/40, Laser type 2nd harmonic Nd, damage threshold (pulsed) 1.5J/cm2 in one nanosecond , with ultra hard coating, dia = 25mm, thickness = 6 mm. Wave length range 1047nm – 1064nm, Transmission 50/50 , laser type Nd, damage threshold (pulsed) 6J/cm2 in one nanosecond , with ultra hard coating, dia = 25mm, thickness = 6mm. Wave length range 1047nm – 1064nm, transmission 60/40, laser type Nd, damage threshold (pulsed) 6J/cm2 in one nanosecond , with ultra hard coating, dia = 25mm,thickness = 6mm. Wave length range 523nm - 532nm, laser type Nd , reflection/reflectivity should be greater than 99.5%, damage threshold (pulsed ) 2J/cm2 in one nanosecond, damage threshold (continuous) 1MW/cm2, with ultra hard coating, dia = 25mm, thickness = 6mm, clear aperture = 22.5mm. Wave length range 1047nm - 1064nm, laser type Nd , reflection/reflectivity should be greater than 99.5%, damage threshold (pulsed ) 3J/cm2 in one nanosecond, damage threshold (continuous) 1MW/cm2, with ultra hard coating, dia = 25mm, thickness =6mm, clear aperture = 22.5mm. For Nd-Yag Laser Goggles with visible light transmission nearly 45% Very high sensitivity, fast response. wavelength range 261nm-266nm, acceptance angle 400 (approx.) Very high sensitivity, fast response. wavelength range 523nm-532nm, acceptance angle 400 (approx.) Very high sensitivity, fast response. wavelength range 1047nm-1064nm, acceptance angle 400 (approx.) Spectral range 400 - 1064nm (UV – Near IR), max power detectable = 50mW, minimum power detectable=0.01μW, Resolution =1nW, accuracy = 8%, max power density = 0.3W/cm2, To adjust the intensity of High Power Nd-YAG laser having threshold 1.5 J/cm2. 10mmx10mmx 50mm
nd
High energy non polarizing beam splitters
1
1
1
High energy laser mirror (high energy normal incidence high reflectors)
1
1 2 1
Laser safty goggles
Si-detectors
1 1
Optical Power meter
1
ND Filter Quartz Cuvette
3 1
F. SPECIFICATION FOR VERTICAL FURNACE & PRESSURE VESSEL FOR THE DEPT. OF CHEMICAL SC.
1. Vertical Furnace: a) Height of the Furnace 4 ft. b) Temp. of top zone (2ft)-3000 C c) Temp. of bottom Zone (2ft)-1000 C d) With provision for nitrogen purging e) Proper insulation & connector
38 2. Pressure Vessel: a) Working volume-100ml b) Pressure limit- 600psi c) Temp-max 800 c d) Provision for CO2 inlet-1 e) Pressure and Temp- gauze f) Viewing facility with proper digital camera.
Terms & Conditions.
1. The rates should be quoted against each item as shown in the list in the same chronological order along with specifications and supporting documents (technical details and brochures etc.). i)The quotations for Lab equipment for Electronics & Comm. Engg. ii) Hardware & Software for the Dept. of Mathematics. iii) Hardware & Networking items for Computer Centre iv) Lab Equipment for Computer Sc. & Engineering v) Optical Components for Dept. of Physics vi) Vertical Furnace & Pressure vessel for the Dept. of Chemical Sc. should be given separately, preferably with separate cover. 2. Quotations should be accompanied byi. A call deposit (earnest money) amounting to Rs. 5,000/- pledge in favour of the Registrar, Tezpur University, payable at Tezpur. ii. A Demand Draft of Rs.100/- as tender fee (the amount should not be clubbed along with the call deposit) in favour of the Registrar, payable at Tezpur (There is no need to give separate earnest money for each category of quotation) 3. The rates should be exclusive of taxes and applicable tax % should be clearly indicated. 4. At least one year warranty for all equipment should be provided. 5. Necessary training if required should be provided free of coast. 6. 10 % bank guarantee to be provided for all order value exceed Rs. 1 lakh (if insisted for). 7. AMC charge (in % of purchase value) must be specified for post warranty maintenance. 8. Income tax return for last two years and current sales tax clearance certificate should be provided along with the bid documents 9. The University is exempted from Custom & Excise duty. 10. Terms and Conditions of supply should be clearly indicated in the quotations. 11. The supplier should be in a position to deliver the ordered items within the stipulated time mentioned in the supply order. 12. Items must be delivered at Napaam campus of the University at the cost of the supplier. 13. The rates should be valid at least for a period of one year.
39 14. The University reserves the right to accept or reject any or all the quotations without assigning any reason. 15. Applications should be forwarded to the Registrar for release of call deposit against unaccepted quotations. 16. No separate tender paper will be issued from the office; one should only download the specifications form the web site.
For any clarification regarding specifications one can ring the following numbers. a) Electronics- 03712-267249 b) Mathematics.-03712-267012 c) Computer Sc.-03712-267109 d) Physics-03712-267007-5551 e) Chemical Sc.-03712-267173 ########################################################################