Alligator® Conveyor Belt Lacing Selection Guide Clipper® Fastener by byrnetown69

VIEWS: 468 PAGES: 2

									One of the most popular methods of joining a belt is the use of mechanical fasteners. Various styles and alloys make it an easy and durable splice that can be installed by
the customer himself. Cost savings are a big factor when avoiding the installation charges of a belt technicien or downtime from a failed splice. Mechanical fasteners also
allow the removal of the belt without disassembling the conveyor. Below are the standard styles available'




                                              Alligator® Conveyor Belt Lacing Selection Guide




                                                                                                                 Belt Thickness
                 Connecting Pin
Minimum Pulley                  Up to 1/16"      1/16"           3/32"          1/8"             9/64"         5/32"        3/16"            7/32"    1/4"          9/32"         5/16"         3/8"
                    Diameter
   Diameter                       1.6mm         1.6mm           2.4mm          3.2mm            3.6mm         4.0mm        4.8mm            5.6mm    6.4mm         7.1mm         7.9mm         9.5mm
   1" / 25mm     .047" / 1.19mm     00
 1 1/2" / 38mm   .062" / 1.57mm                           1
   2" / 51mm     .062" / 1.57mm                                                  7
 2 1/2" / 63mm   .094" / 2.39mm                                                                  15
   3" / 76mm     .109" / 2.77mm                                                                                         20
  4" / 102mm     .125" / 3.17mm                                                                                                        25
  5" / 127mm     .125" / 3.17mm                                                                                                                       27
  7" / 175mm     .141" / 3.58mm                                                                                                                                             35
 9" / 228.6mm    .187" / 4.75mm                                                                                                                                                           45




                                              Clipper® Fastener Selection Guide




                                                                                                                 Belt Thickness
                 Connecting Pin
Minimum Pulley                  Up to 3/64"      1/16"           3/32"          1/8"             5/32"         3/16"        7/32"            1/4"     9/32"         5/16"        11/32"         25/64"
                    Diameter
   Diameter                       1.2mm         1.6mm           2.4mm          3.2mm            4.0mm         4.8mm        5.6mm            6.4mm    7.1mm         7.9mm         9.0mm         10.0mm
 15/16" / 24mm    .065" / 1.7mm            25
                  .065" / 1.7mm                          36SP
                  .065" / 1.7mm                          1XSP
                  .065" / 1.7mm                                           36
   2" / 51mm      .065" / 1.7mm                                          1SP
                  .065" / 1.7mm                                                          1
                  .093" / 2.4mm                                                         2SP
                  .093" / 2.4mm                                                                          2
   3" / 76mm      .093" / 2.4mm                                                                                         3
  4" / 102mm      .125" / 3.2mm                                                                                                        4
  5" / 127mm      .125" / 3.2mm                                                                                                                               5
  6" / 152mm      .156" / 4.0mm                                                                                                                                             6
  7" / 175mm      .156" / 4.0mm                                                                                                                                                           7




                                              Clipper® Unibar® Fastener Selection Guide



                                                                                           Belt Thickness
                 Connecting Pin
Minimum Pulley                  Up to 3/64"  1/16"      3/32"       1/8"       5/32"     3/16"        7/32"     1/4"                                  9/32"         5/16"        11/32"         25/64"
                    Diameter
   Diameter                       1.2mm     1.6mm      2.4mm       3.2mm      4.0mm     4.8mm        5.6mm     6.4mm                                 7.1mm         7.9mm         9.0mm         10.0mm
                  .065" / 1.7mm      UCM36SLXSP
15/16" / 24mm
                  .065" / 1.7mm                 UCM36SLSP
                  .065" / 1.7mm       UCM36XSP
                  .065" / 1.7mm                  UCM36SP
                  .065" / 1.7mm                        UX1SP
   2"/51mm        .065" / 1.7mm                               UCM36
                  .065" / 1.7mm                                          UX-1
                  .093" / 2.4mm                                          U2SP
                  .093" / 2.4mm                                                      U2
   3" / 76mm      .093" / 2.4mm                                                                  U3
  4" / 102mm      .109" / 2.8mm                                                                             U4
  5" / 127mm      .125" / 3.2mm                                                                                                                               U5
  6" / 152mm      .156" / 4.0mm                                                                                                                                             U6
  7" / 175mm      .156" / 4.0mm                                                                                                                                                           U7




                                              Flexco® SR™ Scalloped Edge™ Fastener System




                                                                         Belt Thickness
                 Connecting Pin
Minimum Pulley                      1/8"         7/32"           5/16"         3/8"      7/16"                 19/32"         11/16"
                   Diameter
   Diameter                        3.2mm        5.6mm           7.9mm        9.5mm      11.1 mm               15.1 mm        17.5 mm
  5" / 127mm      .25" / 6.4mm                           R2
  9" / 228mm      .25" / 6.4mm                                           R5
 12" / 305mm     .375" / 9.5mm                                                         R5 1/2
 18" / 457mm     .375" / 9.5mm                                                                           R6




                                                                                                          Transforce Beltal Inc.
                                                                                           2664 Principale Dunham, Quebec Canada J0E 1M0
                                                                                        Tel. (800)363-2358 Tel. (450)263-3735 Fax (450)263-8958
                                                                                                        www.transforcebeltal.com
                                                Alligator® Spiral Lace Selection Guide




                                               Belt Thickness
                 Connecting Pin
Minimum Pulley                       1/16"           1/8"        3/16"
                   Diameter
   Diameter                         1.6mm          3.2mm        4.8mm
  1/2" / 13mm     .035" / 0.9mm              ASL60
  5/8" / 16mm     .047" / 1.2mm                           ASL90




                                                Alligator® Ready Set™ Staple Fastener Selection Guide




                                                      Belt Thickness
                 Connecting Pin
Minimum Pulley                       1/16"          1/8"         3/16"             1/4"
                   Diameter
   Diameter                         1.6mm          3.2mm        4.8mm             6.4mm
   2" / 51mm      .080" / 2.0mm               62
   3" / 76mm      .141" / 3.6mm                             125
  4" / 102mm      .203" / 5.2mm                                             187




                                                Flexco® Bolt Solid Plate Fastener System



                                                                                                  Belt Thickness
                 Connecting Pin
Minimum Pulley                       3/16"          5/16"          7/16"           9/16"        11/16"       13/16"    3/4"      15/16"       1"       1 3/16"
                   Diameter
   Diameter                         4.8mm          7.9mm          11.1 mm         14.3 mm      17.5 mm      20.6 mm   19 mm     23.8 mm    25.4 mm    30.1 mm
  12" / 305mm            -                            1
  14" / 356mm            -                           140
  18" / 457mm            -                                          190
  18" / 457mm            -                                                         1 1/2
  30" / 762mm            -                                                                        2
  36" / 914mm            -                                                                                            2 1/4
 42" / 1067mm            -                                                                                                       2 1/2
 48" / 1219mm            -                                                                                                                  3




                                                Flexco® Bolt Hinged Fastener System




                                              Belt Thickness
                 Connecting Pin
Minimum Pulley                       1/4"          13/32"          5/8"
                   Diameter
   Diameter                         6.4mm         10.3mm          16 mm
  6" / 152mm      .25" / 6.4mm               375x
  9" / 229mm      .25" / 6.4mm                      550




                                                                                    BELTALOK
                                                      -ELEVATOR BELT SPLICE CLAMP




                 Note:            Each clamp fastens a 2" wide section of the splice area. Clamps should be indented at least 1/4" from both edges,
                                  but not more than 1" from both edges.




                                                                                                              Transforce Beltal Inc.
                                                                                               2664 Principale Dunham, Quebec Canada J0E 1M0
                                                                                            Tel. (800)363-2358 Tel. (450)263-3735 Fax (450)263-8958
                                                                                                            www.transforcebeltal.com

								
To top