ESCOREZ
Hydrocarbon Resin
®
Escorez 1310
PRODUCT SPECIFICATIONS
Specification R&B Softening Point Initial Colour(3) Wax Cloud Point(4)
(EVA/Resin/Wax=20/40/40)
Test Method(1) ETM-E-22(2) ETM-E-13 ETM-E-10 ETM-E-301 ETM-E-99
Unit YI — vol%
Specification Range 91.0-97.0 60.0max. 90max Stay clear 0.05max
ZDBC Test Insolubles
1. Product specifications were developed pursuant to ExxonMobil testing and sampling procedures, some of which are equivalent to industry standard test methods. Applicable sampling and testing methods subject to change without notice and available for review on request. 2. Test Method based on ASTM E-28-96. 3. By spectrophotometric analysis of a toluene solution containing 50% resin, in YI (Yellowness Index) unit. 4. EVA=Escorene UL 02528 CC; Wax=Paraffin wax at 68 melting point.
(1)Jinsen products are sold based on the product specifications listed above unless otherwise agreed in writing by Jinsen. No representation, warranty (expressed or implied, of merchantability, fitness or otherwise) or guarantee is made as to the suitability or fitness for use of the product in the customer's specific application. It is the user's responsibility to confirm the suitability and fitness for use of the product. Specifications are pursuant to ExxonMobil Chemical's sampling and testing procedures in effect at the time of production. Analysis may be performed on representative samples and not the actual product shipped. (2)This product, including the product name, shall not be used or tested in any medical application without the prior written acknowledgement of Shanghai Jinsen Hydrocarbon Resins Co., Ltd. and ExxonMobil Chemical Asia Pacific, a division of ExxonMobil Asia Pacific Pte. Ltd. (for sales outside China) as to the intended use. ESCOREZ® is a trademark of Exxon Mobil Corporation, used under license by Shanghai Jinsen Hydrocarbon Resins Co., Ltd.
JSIMS-16-03, Version 9 Feb. 8, 2008
Page 1 of 1
ESCOREZ
石油树脂
®
Escorez 1310
产品规格
规格 软化点 色相(3) 蜡雾点(4)
(EVA/Resin/Wax=20/40/40)
试验方法(1) ETM-E-22(2) ETM-E-13 ETM-E-10 ETM-E-301 ETM-E-99
单位 YI
规格范围 91.0-97.0 60.0max. 90max
ZDBC 试验 不溶物
— vol%
澄清 0.05max
1.产品规格是按照埃克森美孚的试验和抽样程序建立的， 这些程序中有些与工业标准试验方 法一样。所有采用的抽样和试验方法可以改变而无须通知，金森公司可以应要求提供这些 方法。 2.试验方法是根据 ASTM E-28-96 建立的。 3.通过分光光度计分析 50%甲苯/50%树脂溶液，以黄色指数(YI)为单位。 4.EVA 牌号：UL 02528 CC；微晶蜡：熔点 68 。
(1)除非金森另行书面同意，金森的产品是基于以上的产品规格出售的。金森对产品在客户特定应用中的适用性或适当性未作任何其它 (明示或隐含的、关于适销性、适用性 或其它的)陈述、担保或保证。使用方应负责确认使用该产品的适用性和适当性。产品规格指标根据的是产品生产当时 ExxonMobil 采用的采样和测试程序。分析的是具有代表 性的样品，而不一定是实际发出的产品。 (2)在未获得上海金森石油树脂有限公司和埃克森美孚亚太区私人有限公司部门-埃克森美孚化工亚太区(如在中国以外销售)对该意欲使用目的之书面同意之前，此产品，包括 其产品名称，不可用于任何有关医疗的用途及测试。 ESCOREZ®是Exxon Mobil Corporation的注册商标，上海金森石油树脂有限公司取得许可使用权。
JSIMS-16-03, Version 9 Feb. 8, 2008
Page 1 of 1