PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS For Customer: : APPROVAL FOR SPECIFICATION : APPROVAL FOR SAMPLE Module No. : Table of Contents No. 1 2 3 4 5 6 7 8 9 10 11 Item Cover Sheet (Table of Contents) History of Specification Revision LCD Module Block Diagram Maximum Ratings Electrical Characteristics Optical Characteristics Interface Specifications Reliability Tests Precautions for Operation and Storage Printing Page 1 2 3~5 6 7 8 9 ~ 11 12 ~14 15 16 17 MT18G13G Date: 2006.10.02 Version : P For Customer’s Acceptance : Approved by Comment This specification is proposed by Arima Display Corporation. Presented by Checked by Organized by Arima Display Corporation N0.248-47, Shin Sheng Rd., L.E.P.Z., Chian Jen Chiu, Kaohsiung 806, Taiwan, R.O.C. TEL: +886-7-8130666 FAX: +886-7-8310555 Module No. : MT18G13G This specification is the property of Arima Display Corporation , any copy or Date: 2006.10.02 Ver:P Page: 1 reproduction without permission is prohibited. 2. History of Specification Revision Date Rev. Page Contents Module No. : MT18G13G This specification is the property of Arima Display Corporation , any copy or Date: 2006.10.02 Ver: P Page: 2 reproduction without permission is prohibited. 3. LCD Module 3.1 Mechanical Data No. Item Contents 34 (W) x 47 (H) x 2.5(D) 28.512 (W) x 35.64 (H) 176 x 3 (R.G.B) (W) x220 (H) 162 x 162 • Transmissive 65K or 260k TFT (Negative type) • With glare type of upper polarizer (6) Viewing direction (7) Operating temperature (8) Storage temperature (9) Backlight (10) Power supply voltage (11) Weight (12) LCD controller/driver (13) Interface type 12 o‘clock -20 -30 White ~ +70 ~ +80 LED x 2 Unit mm mm dots um ° C ° C pcs V g 80-system - (1) Module size (2) Viewing area (3) Dot Number (4) Pixel Size (5) LCD type 2.4V ~ 3.3V (6.3) ILI9221 8/16-bit bus interface Module No. : MT18G13G This specification is the property of Arima Display Corporation , any copy or Date: 2006.10.02 Ver: P Page: 3 reproduction without permission is prohibited. 3.2OutlineDimension A/A) Max Module No. : MT18G13G This specification is the property of Arima Display Corporation , any copy or T=0.23 +0.02/-0   Date: 2006.10.02 Ver: P Page: 4 reproduction without permission is prohibited. 3.3 Interface Pin Connection Pin no 1 2 3 4 5 6 7 8~23 24 Symbol LED_A NC LED_K1 LED_K2 GND LCM_ID RESET DB15~DB0 RD Description Power Supply For LEDs (+) No Connected Power Supply For LEDs (-) Power Supply For LEDs (-) Ground Identify A reset pin. Initializes the ILI9221 with a low input. Be sure to execute a power-on reset after supplying power. Parallel Data Bus A read strobe signal and enables an operation to read out data when the signal is low. Fix to either IOVcc or DGND level when not in use. A write strobe signal and enables an operation to write data when the signal is low. Fix to either IOVcc or DGND level when not in use. SPI Mode: A synchronizing clock signal in SPI mode. A register select signal. Low: select an index or status register High: select a control register Fix to either IOVcc or DGND level when not in use. A chip select signal. Low: the ILI9221 is selected and accessible High: the ILI9221 is not selected and not accessible Fix to the DGND level when not in use. Gound A supply voltage to the internal logic: VDD = 2.4~3.3V A supply voltage to the internal logic: VDD = 2.4~3.3V No Connected Switch 8 or 16 bits data bus Pin. IM0=High:8 bit data bus(Choice DB8~DB15) IM0=Low:16 bit data bus(Choice DB0 ~DB15) Output a frame head pulse signal. The FLM signal is used when writing RAM data in synchronization with frame. Leave the pin open when not in use. 25 WR 26 RS 27 28 29 30 31 32 CS GND VDD VDD NC IM0 33 FLM Module No. : MT18G13G This specification is the property of Arima Display Corporation , any copy or Date: 2006.10.02 Ver:P Page: 5 reproduction without permission is prohibited. 4. Block Diagram for LCM G1 1.8" TFT LCD Panel G220 Y1 Y528 Gate Driver Source Driver DC/DC Convert Gate Driver Timing Controller with Memory CS RS WR RD RESET DB[0:15] VDD(2.4~3.3V) Connection with Host Module No. : MT18G13G This specification is the property of Arima Display Corporation , any copy or Date: 2006.10.02 GND Ver: P Page: 6 reproduction without permission is prohibited. 5. Maximum Ratings 5.1 Electrical Absolute Maximum Ratings. Min. -0.3 -0.3 Ta=25 Max. Unit 3.3 V VDD+0.3 V Item Supply voltage(VDD) Input voltage Symbol VDD-VSS VI Storage Operating Remark MIN. MAX. MIN. MAX. Ambient Temperature -30° C 80° C -20° C 70° C Note1, 2, Humidity Note 3 Note 3 No Condensation Note 1. The response time will become lower when operated at low temperature. Note 2. Background color changes slightly depending on ambient temperature. The phenomenon is reversible. Note 3. Ta<=70° : 90%RH MAX. C Ta> 70° : Absolute humidity must be lower than the humidity of 85% RH at 40° C C. Item 5.2 Environmental Absolute Maximum Ratings Module No. : MT18G13G This specification is the property of Arima Display Corporation , any copy or Date: 2006.10.02 Ver: P Page: 7 reproduction without permission is prohibited. 6. Electrical Characteristics 6.1 Electrical Characteristics of LCD Item Supply voltage Input Signal Voltage Power Supply Current Note (1) Symbol VDD VIH VIL IDD Condition VDD-VSS “H” Level “L” Level VDD=2.8V MIN. (2.4) 0.8 VDD -0.3 Typ. (2.8) Max. (3.3) VDD 0.2 VDD Unit V V mA (5.0) Please refer to the detail specification of LSI device ILI9221 (ILITEK) 6.2 Electrical Characteristics of Backlight Item Power Supply for LED Symbol ILED=40mA Min. Typ. (3.5) Max. Unit V ( Ta=25°C ) Remark NOTE(1) Note (1) : LED 2 PCS Parallel Module No. : MT18G13G This specification is the property of Arima Display Corporation , any copy or Date: 2006.10.7 Ver: P Page: 8 reproduction without permission is prohibited. 7. Optical Characteristics 7.1 Optical Characteristics of Main Item Viewing Angle Range Brightness Contrast Ratio R G Color Tone (CIE Coordinate) B W 1 2 Symbol X axle Y axle B CR X Y X Y X Y X Y Condition CR>10 CR>10 =0° Min. (-35) (-15) Typ. 200 200 (0.61) (0.33) (0.32) (0.53) (0.14) (0.09) (0.30) (0.31) 40 - Max. (45) (45) (0.66) (0.38) (0.37) (0.58) (0.19) (0.14) (0.35) (0.36) - Unit Deg. cd/ - (Ta= 25° C) Remark Note 1,2 170 150 Normal viewing (0.56) angle (0.28) At the center of (0.27) (0.48) panel (0.09) ° (0.04) (0.25) (0.26) (80) Note 3,4 Response Time Tr+ Tf Luminance Uniformity - Note 5 Note 1. Definition of θ and φ φ2 Eye from (θ,φ1) Note 2. Definition of Viewing angle φ1 and φ2 CR Y(θ=180°) φ1 Eye from (θ,φ2) X θ Y(θ=0°) X‘ 10.0 φ1 φ1<0°<φ2 φ2 CR vs Viewing and φ Module No. : MT18G13G This specification is the property of Arima Display Corporation , any copy or Date: 2006.10.02 Ver: P Page:9 reproduction without permission is prohibited. Note 3. CR= Definition of Contrast Ratio “CR” Brightness at selected dot (B1) Brightness at non-selected dot (B2) B1 φ B1 Brightness Sensor B2 Back light B2 Sensor : BM-7 Aperture : 1° Distance : 50 cm Operation voltage Note 4. Definition of “CR”and “VGH” CR VGH Note 5. Operation Voltage Definition of optical response time Non-selected state Selected state Non-selected state Brightness 100% 90% tr Rise time tf Fall time Module No. : MT18G13G This specification is the property of Arima Display Corporation , any copy or Date: 2006.10.02 10% Ver: P Page:10 reproduction without permission is prohibited. Note 6: Definition of uniformity (Un) Un = Bmin Bmax x100% Module No. : MT18G13G This specification is the property of Arima Display Corporation , any copy or Date: 2006.10.02 Ver: P Page:11 reproduction without permission is prohibited. 8. Interface Specifications 8.1 DC Characteristics (VCC = 2.40 ~ 3.30V, IOVCC = 1.65 ~ 3.30V) Item Input high voltage Input low voltage Output high voltage(1) ( DB0-17 Pins) Output low voltage ( DB0-17 Pins) I/O leakage current Current consumption during normal operation (VCC – DGND ) Current consumption during standby mode (VCC – DGND ) IST µA VCC=3V , Ta=25 ° C 5 10 VCC=3.0V , Ta=25° , fOSC = C IOP µA 177KHz 100 (VCC) VOL1 ILI V µA Symbol VIH VIL Unit V V Test Condition VCC= 1.8 ~ 3.3V VCC= 1.8 ~ 3.3V Min. 0.8*IOVCC -0.3 Typ. Max. IOVCC 0.2*IOVCC VOH1 V IOH = -0.1 mA IOVCC=1.65~3.3V VCC= 2.4 ~ 3.3V IOL = 0.1mA Vin = 0 ~ VCC 0.8*IOVCC - - -0.1 - 0.2*IOVCC - 0.1 VCC=3V,VGAM1OUT=5.0V DDVDH=5.5V , LC Drive Power Supply Current ( DDVDH-DGND ) ILCD mA fOSC = 177KHz (160 line) , Ta=25 ° GRAM data = 0000h, C, REV=”0”, SAP=”001”, ON4-0=”0”, OP4-0=”0”, MP52-00=”0”, MN52-00=”0”, CP12-00=”0” LCD Driving Voltage ( DDVDH-DGND ) Output voltage deviation 3.0 - DDVDH V - 4.5 - 6 mV - 5 - Dispersion of the Average Output Voltage V mV - -10 - 10 Module No. : MT18G13G Date: 200.10.02 Ver.: P Page:12 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 8.2 Reset Timing Characteristics Reset Timing Characteristics (VCC = 1.8 ~ 3.3 V, IOVCC = 1.65 ~ 3.3 V) Item Reset low-level width Reset rise time Symbol tRES trRES Unit ms µs Min. 1 Max. 10 nRESET VIL tRES trRES VIH 8.3 AC Characteristics i80-System Interface Timing Characteristics Normal Write Mode (IOVCC = 1.65~3.3V, VCC=2.4~3.3V) Item Symbol Unit Min. Max. Bus cycle time Write low-level pulse width Write high-level pulse width Read low-level pulse width Read high-level pulse width Write / Read rise / fall time Setup time Address hold time Write data set up time Write data hold time Read data delay time Read data hold time Write Read tCYCW tCYCR PW LW PW HW PW LR PW HR tWRr/tWRf tAS tAH tDSW tH tDDR tDHR ns ns ns ns ns ns ns ns ns ns ns ns ns 100 300 50 50 150 150 10 5 5 10 15 5 500 25 100 - Write ( RS to nCS, E/nWR ) Read ( RS to nCS, RW/nRD ) Module No. : MT18G13G Date: 2006.10.02 Ver.:P Page:13 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 8.4 80 mode bus interface timing characteristics Module No. : MT18G13G Date: 2006.10.02 Ver.:P Page:14 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 9. Reliability Tests This standard reliability test is done only for the first lot of MP products. Customer and supplier must hold a discussion if other reliability test is requested by customer. No 1 2 3 Test Item High temperature and high humidity Under storage High temperature under storage Low temperature under storage -20° C 4 Thermal shock (under storage) Drop test (Packing box with full samples inside) 30min Test Condition 40° , C 90%RH, 120hrs (But no condensation of dew) 80° , C -30° , C 120hrs 120hrs 70° C 30min 25° C 5min 1 cycle total 30 cycles 5 (X,Y,Z) x 2 total 6 directions drop from 1 meter to ground Operation : Supply 2.8V for logic system and Vop voltage for LCD module. Module No. : MT18G13G This specification is the property of Arima Display Corporation , any copy or Date: 2006.10.02 Ver:P Page:15 reproduction without permission is prohibited. 10. Precautions for Operation and Storage 10.1 Precautions for Operation (1) Since LCD panel is made of glass, in order to prevent from glass broken or color tone change, please do not apply any mechanical shock or impact or excessive force to it when installing the LCD module. (2) If LCD panel is broken and liquid crystal substance leaks out and contact your skin or clothes, please immediately wash it off by using soap and water. (3) The polarizer on the LCD surface is soft and easily scratched. Please be careful when handling. (4) If LCD surface becomes contaminated, please wipe it off gently by using moisten soft cloth with normal hexane, do not use acetone, ketone, ethanol, isopropyl alcohol or water. If there is saliva or water on the LCD surface, please wipe it off immediately. (5) When handling LCD module, please be sure that the body and the tools are properly grounded. And do not touch I/F pins with bare hands or contaminate I/F pins. (6) Do not attempt to disassemble or process the LCD module. (7) LCD module should be used under recommended operating conditions shown in chapter 6 and 7. (8) Response time will be extremely slower at lower temperature than at specified temperature and LCD will show different color when at higher temperature. The phenomenon will disappear when returning to specified condition. (9) Foggy dew, moisture condensation or water droplets deposited on surface and contact terminals will cause polarizer stain or damage, the deteriorated display quality and electrochemical reaction then leads to the shorter life time and permanent damage to the module probably. Please pay attention to the environmental temperature and humidity. 10.2 Precautions for Storage (1) Please store LCD module in a dark place, avoid exposure to sunlight, the light of fluorescent lamp or any ultraviolet ray. (2) Keep the environment temperature at between 10° and 35° and at normal humidity. C C Avoid high temperature, high humidity or temperature below 0° C. (3) That keeps the LCD modules stored in the container shipped from supplier before using them is recommended. (4) Do not leave any article on the LCD module surface for an extended period of time. Arima display Corp. warrants for a period of 12 months from shipping date when stored or used under normal condition. 10.3 Warranty period Module No. : MT18G13G Date: 2006.10.02 Ver:P Page:16 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 11. Printing 11.1 Printing (on product) Module No., Lot No., and manufactory will be shown on every product . For example: MT18G13G 6A021 11.2 Lot No. Definition 6 A 0 2 1 Manufacture year Manufacture month Manufacture date Manufacture place 4: 5: 6: 7: 8: 2004 2005 2006 2007 2008 1: 2: 3: 4: 5: 6: Jan. Feb. Mar. Apr. May. Jun. 7: Jul. 8: Aug. 9: Sep. A: Oct. B: Nov. C: Dec. 01: 1 02: 2 . . . 31:31 1: Taiwan 2: China Module No. : MT18G13G Date: 2006.10.02 Ver:1 Page:17 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited.