Using A Logic Analyzer by klutzfu59

VIEWS: 0 PAGES: 7

									Using A Logic Analyzer
    (Tek TLA5201)
  ENGR433 Digital Design
       Fall 2004
                   Basic Steps

•   1. Turn on
•   2. Setup Channels
•   3. Trigger Definition
•   4. Waveform Configuration
•   5. Acquire Data
             Channel Setup

• Connect probes
  — Black wire is ground
  — Signals wires are
    channels 0-7, resistor
    color coded
                Channel Setup
•   Delete old groups
•   Enter unique channel names
•   Enter new group names
•   Add channels to groups
            Trigger Definition
• Select trigger program
  — Fill in trigger pattern information
• Drag trigger position
      Waveform Configuration

• Add waveforms
  — By group or by name
            Acquiring Data

• Click Run to start acquisition

								
To top