COMPONENT MAINTENANCE MANUAL WITH ILLUSTRATED PARTS LIST by olliegoblue26

VIEWS: 64 PAGES: 67

									           COMPONENT MAINTENANCE MANUAL
                        WITH
                ILLUSTRATED PARTS LIST

                          Decorative Window Shade Assembly
                                      A320-113M2165




Second Issue: JAN 10/05




                                      25-23-08               JAN 10/05
  Lou Martin & Assoc., Inc.
Component Maintenance Manual




     25-23-08
                                   Lou Martin & Assoc., Inc.
                                 Component Maintenance Manual

                                          Record of Revisions

Rev.      Issue         Date         By      Rev.      Issue      Date          By
No.       Date        Inserted               No.       Date     Inserted
 IR    07 DEC 04    07 DEC 04    C. MEDINA
  A     10 JAN 05    10 JAN 05   C. MEDINA




                                                                           Record of Revisions
                                                                                      PAGE 1
                                                                                    JAN 10/05
                                      25-23-08
  Lou Martin & Assoc., Inc.
Component Maintenance Manual




     25-23-08
                       Lou Martin & Assoc., Inc.
                     Component Maintenance Manual

                         Record of Temporary Revisions

Temporary    Page      Issued          By             Date           By
 Rev No.    Number      Date                        Removed




                                                      Record of Temporary Revisions
                                                                           PAGE 1
                                                                         JAN 10/05
                           25-23-08
  Lou Martin & Assoc., Inc.
Component Maintenance Manual




     25-23-08
                 Lou Martin & Assoc., Inc.
               Component Maintenance Manual

                   Record of Temporary Revisions

 SB Number           Included in Revision      Date Of Incorporation
And Revision




                                               Record of Temporary Revisions
                                                                    PAGE 1
                                                                  JAN 10/05
                    25-23-08
                            Lou Martin & Assoc., Inc.
                          Component Maintenance Manual

                             TABLE OF CONTENTS

                                                         Page

RECORD OF REVISIONS                                        1
RECORD OF TEMPORARY REVISIONS                              1
SERVICE BULLETIN LIST                                      1
TABLE OF CONTENTS                                          1
LIST OF EFFECTIVE PAGES                                    1
INTRODUCTION                                               1
1.    General                                              1
2.    Layout of manual                                     1
3.    Revision of the document                             2
4.    Certification of operations                          3
5.    WARNINGS-CAUTIONS-NOTES                              3
6.    List of Abbreviations                                4
DESCRIPTION AND OPERATION                                  1
1.    Description                                          1
2.    Technical Data                                       3
TESTING AND FAULT ISOLATION                                1001
1.    Testing                                              1001
2.    Fault Isolation                                      1002
SCHEMATIC AND WIRING DIAGRAMS                              NOT APPLICABLE
UNINSTALLING WINDOW ASSY.                                  3001
1.    General                                              3001
2.    Job set-up information                               3001
3.    Preliminary Steps                                    3001
4.    Upper window removal                                 3002
5.    Lower window clip removal                            3003
DISASSEMBLY                                                4001
1.    General                                              4001
2.    Job set-up information                               4001
3.    Preliminary Steps                                    4001
4.    Decorative mask removal                              4002
5.    Inner lens removal                                   4002
6.    Blind mod. assy. removal                             4002
CLEANING                                                   5001
1.    General                                              5001
2.    Job set-up information                               5001
3.    Procedure                                            5002

                                                         TABLE OF CONTENTS
                                                                     PAGE 1
                                                                   JAN 10/05


                               25-23-08
                                  Lou Martin & Assoc., Inc.
                                Component Maintenance Manual

AIRWORTHINESS LIMITATIONS                                         6001
1.    General                                                     6001
INSPECTION/REPLACEMENT & REPAIR                                   7001
1.    General                                                     7001
2.    Job set-up information                                      7001
3.    Inspection of window unit                                   7002
4.    Replacement of Parts                                        7002
5.    Replacement procedure for outer lens                        7003
6.    Replacement procedure for broken shade string               7004
7.    Replacement procedure for a damaged inner lens              7005
ASSEMBLY                                                          8001
1.    General                                                     8001
2.    Job set-up information                                      8001
3.    Blind mod. Reattachment                                     8002
4.    Inner Lens reattachment                                     8002
5.    Decorative Mask reattachment                                8002
FITS AND CLEARANCES                                               9001
1.    General                                                     9001
2.    Clearances                                                  9001
SPECIAL TOOLS, FIXTURES, EQUIPMENT                                10001
1.    Special tools, fixtures and equipments                      10001
STORAGE                                                           11001
1.    General                                                     11001
ILLUSTRATED PARTS LIST                                            INTRO IPL 1
1.    Introduction                                                INTRO IPL 1
2.    How to use the Illustrated Parts List                       INTRO IPL 2
3.    Alphanumerical Index                             ALPHANUMERICAL INDEX
DETAILED PARTS LIST                                               12001




                                                                 TABLE OF CONTENTS
                                                                             PAGE 2
                                                                           JAN 10/05

                                       25-23-08
                         Lou Martin & Assoc., Inc.
                       Component Maintenance Manual

                        LIST OF EFFECTIVE PAGES

SUBJECT         PAGE    DATE            SUBJECT        PAGE          DATE

TITLE PAGE        1    JAN 10/05        DISASEMBLY      4001      JAN 10/05
                                                        4002      JAN 10/05
RECORD OF         1    JAN 10/05
REVISION                                CLEANING        5001      JAN 10/05
                                                        5002      JAN 10/05
RECORD OF         1    JAN 10/05                        5003      JAN 10/05
TEMPORARY                                               5004      BLANK
REVISIONS
                                        AIRWOTHINESS    6001      JAN 10/05
SERVICE           1    JAN 10/05        LIMITATIONS     6002      BLANK
BULLERIN LIST
                                        INSPECTION/     7001     JAN 10/05
TABLE OF          1    JAN 10/05        REPLACEMENT     7002     JAN 10/05
CONTENTS          2    JAN 10/05        & REPAIR        7003     JAN 10/05
                                                        7004      JAN 10/05
LSIT OF           1    JAN 10/05                        7005      JAN 10/05
EFFECTIVE         2    JAN 10/05
PAGES                                   ASSEMBLY        8001      JAN 10/05
                                                        8002      JAN 10/05
INTRODUCTION      1    JAN 10/05                        8003      JAN 10/05
                  2    JAN 10/05
                  3    JAN 10/05        FITS AND        9001     JAN 10/05
                  4    JAN 10/05        CLEARANCES      9002     JAN 10/05
                  5    JAN 10/05
                  6    BLANK            SPECIAL TOOLS, 10001     JAN 10/05
                                        FIXTURES, AND
DESCRIPTION       1    JAN 10/05        EQUIPTMENT
AND               2    JAN 10/05
OPERATION         3    JAN 10/05        STORAGE        11001     JAN 10/05

TESTING AND       1    JAN 10/05        ILLUSTRATED INTRO IPL 1    JAN 10/05
FAULT             2    JAN 10/05        PARTS LIST  INTRO IPL 2    JAN 10/05
                                                    INTRO IPL 3    JAN 10/05
UNINSTALLING 3001      JAN 10/05                    INTRO IPL 4    JAN 10/05
WINDOW ASSY. 3002      JAN 10/05                    INTRO IPL 5    JAN 10/05
             3003      JAN 10/05                    INTRO IPL 6    BLANK
             3004      JAN 10/05
                                                        LIST OF EFFECTIVE PAGES
                                                                          PAGE 1
                                                                        JAN 10/05




                             25-23-08
                          Lou Martin & Assoc., Inc.
                        Component Maintenance Manual
                        LIST OF EFFECTIVE PAGES

SUBJECT        PAGE      DATE

ALPHANUMERICAL 1       JAN 10/05
INDEX          2       JAN 10/05

DETAILED     12001-0   JAN 10/05
PARTS LIST   12001-1   JAN 10/05
             12002-0   JAN 10/05
             12002-1   JAN 10/05
             12003-0   JAN 10/05
             12003-1   JAN 10/05
             12004-0   JAN 10/05
             12004-1   JAN 10/05
             12005-0   JAN 10/05
             12005-1   JAN 10/05




                                                       LIST OF EFFECTIVE PAGES
                                                                         PAGE 1
                                                                       JAN 10/05



                             25-23-08
                                    Lou Martin & Assoc., Inc.
                                  Component Maintenance Manual
                                           Introduction

TASK 25-23-08-990-801


1.    General

      A.    This document writing follows the directives of the “A.T.A Specification No. 100”
            updating N° 36. The instructions in this manual give the information necessary to do
            maintenance functions ranging from simple checks and replacement to complete shop
            type repair for the equipment, manufactured and supported by:

                                    Lou Martin & Assoc., Inc.
                                       2107 Danbury Drive
                                   San Antonio, TX. 78217 USA
                           Tel.: (210) 930-8181 – Fax: (210) 930-8184

      B.    This document is applicable to the following equipment:

                   Decorative Window Shade Assy.          A320-113M2165

TASK 25-23-08-990-802

2.    Layout of manual

      A.    This manual contains a general description and operation followed by data for
            maintenance, repair, disassembly and assembly of the equipment. This is followed by an
            illustrated parts list (IPL), which gives detailed information.

      B.    The manual is divided into separate sections:

            (1)    Title Page

            (2)    Record of Revisions

            (3)    Table of Contents

            (4)    Introduction

            (5)    Procedures and IPL Sections


                                                                                            INTRO
                                                                                           PAGE 1
                                                                                         JAN 10/05


                                       25-23-08
                                   Lou Martin & Assoc., Inc.
                                 Component Maintenance Manual
      C.    This manual will be updated as required by revisions: Service Bulletins may be issued
            separately. Their effect on this manual will be made evident by reissue of the appropriate
            list of Service Bulletins.

TASK 25-23-08-990-803

3.    Revision of the document

      A.    Two types of revisions of the manual are used to follow the evolution of this equipment/

            (1)    Normal revision

                   (a)     Normal revisions are periodically issued.

                   (b)     They are printed on white paper

                   (c)     A List of Revisions gives a better follow-up of these revisions.

                   (d)     The changes in the text are shown by a vertical line drawn in the left
                           margin.

            (2)    Temporary revision

                   (a)     Temporary revisions can be issued in advance of the normal revision.

                   (b)     They are printed on yellow paper.

                   (c)     A List of Temporary Revisions gives their follow-up.

                   (d)     A letter comes with these temporary revisions to give all the necessary
                           information about the insertion of these revisions.




                                                                                                 INTRO
                                                                                                PAGE 2
                                                                                              JAN 10/05




                                        25-23-08
                                     Lou Martin & Assoc., Inc.
                                   Component Maintenance Manual
             (3)     General rules for the insertion of temporary revisions

                     (a)     A yellow page (with a higher sequential number) can replace a yellow
                             page.

                     (b)     A yellow page cannot replace a white page.

TASK 25-23-08-990-804

4.    Certification of operation

             A.      The maintenance operations described in the present COMPONENT
                     MAINTENANCE MANUAL have been checked in the manufacturer’s workshop
                     by observing the disassembly, assembly, testing, and trouble-shooting instructions
                     detailed in this document.



TASK 25-23-08-990-805

      5.     WARNINGS-CAUTIONS-NOTES

             A.      Special adjuncts to the text are expressed by the following headings:

                     WARNING : CALL ATTENTION FOR THE USE OF MATERIALS,
                     PROCESSES, METHODS, PROCEDURES OR TOLERANCES WHICH MUST
                     BE ADHERED TO CAREFULLY IN ORDER TO AVOID ANY INJURY.

                     CAUTION: CALL ATTENTION TO METHODS AND PROCEDURES,
                     WHICH MUST BE ADHERED TO IN ORDER TO AVOID DAMAGE TO
                     EQUIPMENT.

                     NOTE: Call attention to methods, which make the procedures easier.




                                                                                                INTRO
                                                                                               PAGE 3
                                                                                             JAN 10/05


                                         25-23-08
                                    Lou Martin & Assoc., Inc.
                                  Component Maintenance Manual
TASK 25-23-08-990-805

6.    List of Abbreviations

             ASSY             : ASSEMBLY
             ATA              : AIR TRANSPORT ASSOCIATION OF AMERICA
             FAA              : FEDERAL AVIATION ADMINSTRATION
             FAR              : FEDERAL AVIATION REGULATION
             IPL              : ILLUSTRATED PARTS LIST
             LB.              : POUND
             MS               : MILITARY STANDARD
             NAS              : NATIONAL AEROSPACE STANDARD
             REV              : REVISION
             SB               : SERVICE BULLETINS
             TR               : TEMPORARY REVISION




                                                                          INTRO
                                                                         PAGE 4
                                                                       JAN 10/05


                                       25-23-08
     Lou Martin & Assoc., Inc.
   Component Maintenance Manual




PAGE INTENTIONALLY LEFT BLANK




                                     INTRO
                                    PAGE 5
                                  JAN 10/05


        25-23-08
                                    Lou Martin & Assoc., Inc.
                                  Component Maintenance Manual
TASK 25-23-08-870-801

                                DESCRIPTION AND OPERATION


1.    Description

      A.     General

      Basically, the decorative window shade assy. is made of a fiberglass shell, blind assy., inner &
      outer lenses and a decorative mask.

      For attachment, the cabin window assy. is supplied with two thru inserts to pick-up existing
      attach point for upper attachment and three Airbus clips for lower attachment.

      B.     Composition

             (See FIGURE 1 / GRAPHIC 25-23-08-991-001 next page)




                                                                                               PAGE 1
                                                                                             JAN 10/05


                                         25-23-08
     Lou Martin & Assoc., Inc.
   Component Maintenance Manual




FIGURE 1 / GRAPHIC 25-23-08-991-001
                                        PAGE 2
                                      JAN 10/05


         25-23-08
                                              Lou Martin & Assoc., Inc.
                                            Component Maintenance Manual
       TASK 25-23-08-870-802

          2.     Technical data


                                                                                        DECORATIVE
ASSY.          REVEAL         INNER LENS          OUTER LENS          BLIND MOD.                           HANDLE ASSY.
                                                                                           MASK
 -1        A319-113M001-1    A320-113M2165-111   A320-113M2165-109   A320-113M2165-51   A319-113M004-1     A320-113M2165-41
 -5        A319-113M001-43   A320-113M2165-115   A320-113M2165-109   A320-113M2165-55   A319-113M004-73    A320-113M2165-41
 -7        A319-113M001-45   A320-113M2165-117   A320-113M2165-109   A320-113M2165-57   A319-113M004-75    A320-113M2165-41
 -9        A319-113M001-55   A320-113M2165-111   A320-113M2165-109   A320-113M2165-51   A319-113M004-1     A320-113M2165-41
 -11       A319-113M001-11   A320-113M2165-121   A320-113M2165-109   A320-113M2165-61   A319-113M004-11    A320-113M2165-41
 -13       A319-113M001-13   A320-113M2165-123   A320-113M2165-109   A320-113M2165-63   A319-113M004-13    A320-113M2165-41
 -15       A319-113M001-51   A320-113M2165-125   A320-113M2165-109   A320-113M2165-65   A319-113M004-61    A320-113M2165-43
 -17       A319-113M001-17   A320-113M2165-127   A320-113M2165-109   A320-113M2165-67   A319-113M004-17    A320-113M2165-43
 -19       A319-113M001-53   A320-113M2165-129   A320-113M2165-109   A320-113M2165-69   A319-113M004-63    A320-113M2165-43
 -21       A319-113M001-41   A320-113M2165-131   A320-113M2165-109   A320-113M2165-71   A319-113M004-65    A320-113M2165-41
 -23       A319-113M001-47   A320-113M2165-133   A320-113M2165-109   A320-113M2165-73   A319-113M004-67    A320-113M2165-41
 -25       A319-113M001-25   A320-113M2165-135   A320-113M2165-109   A320-113M2165-75   A319-113M004-25    A320-113M2165-41
 -27       A319-113M001-57   A320-113M2165-111   A320-113M2165-109   A320-113M2165-51   A319-113M004-1     A320-113M2165-41
 -29       A319-113M001-55   A320-113M2165-111   A320-113M2165-109   A320-113M2165-51   A319-113M004-1     A320-113M2165-41
 -31       A319-113M001-1    A320-113M2165-111   A320-113M2165-109   A320-113M2165-51   A319-113M004-77    A320-113M2165-41
 -32       A319-113M001-1    A320-113M2165-111   A320-113M2165-109   A320-113M2165-51   A319-113M004-79    A320-113M2165-41
 -33       A319-113M001-33   A320-113M2165-139   A320-113M2165-109   A320-113M2165-79   A319-113M004-33    A320-113M2165-41
 -35       A319-113M001-35   A320-113M2165-141   A320-113M2165-109   A320-113M2165-81   A319-113M004-35    A320-113M2165-41
 -37       A319-113M001-37   A320-113M2165-143   A320-113M2165-109   A320-113M2165-83   A319-113M004-69    A320-113M2165-41
 -39       A319-113M001-39   A320-113M2165-145   A320-113M2165-109   A320-113M2165-85   A319-113M004-71    A320-113M2165-41


                                       FIGURE 2/ GRAPHIC 25-23-08-991-002




                                                                                                            PAGE 3
                                                                                                          JAN 10/05


                                                   25-23-08
                              Lou Martin & Assoc., Inc.
                            Component Maintenance Manual

                      TESTING AND FAULT ISOLATION

TASK 25-23-08-700-801

1.    Testing

      A.    General

            (1)        The tests check the different adjustments, components and mechanisms of
                       the window shade unit.

            (2)        The defective parts must be repaired in workshops or can be replaced by
                       serviceable parts.


      B.        Job set-up information

            (1)        Tools, fixtures, equipment and materials

                       NOTE: Refer to “SPECIAL TOOLS, FIXTURE AND EQUIPMENTS”
                             for full details on the items used.

      C.    Procedure

            (1)        Make sure the shade unit operates with the desired tension




                                                                                    PAGE 1001
                                                                                     JAN 10/05

                                   25-23-08
                                  Lou Martin & Assoc., Inc.
                                Component Maintenance Manual



TASK 25-23-08-700-802

      2.    Fault isolation

            A.     Faults you can find during the operations are given here under together with their
                   probable causes and their corrective actions.

            B.     After the necessary corrective action is done, do an inspection of the window unit
                   to make sure that the fault is corrected.

            C.     Mechanical fault isolation

                           TROUBLE                POSSIBLE CAUSE                CORRECTION
                   SHADE ASSY.
                   Shade assy. does not         Incorrect tension          Adjust spring by resetting
                   operate with the desired                                ball catch as required to
                   tension                                                 add release tension
                                                                           (Refer to section 3)
                   DECORATIVE MASK
                   Panel is loose               Screws holding mask in     Tighten attachment
                                                place are loose            screws




                                                                                         PAGE 1002
                                                                                          JAN 10/05

                                       25-23-08
                                    Lou Martin & Assoc., Inc.
                                  Component Maintenance Manual
TASK 25-23-08-700-802


   3.         Procedure for adjusting shade tension

         A.      Remove window shade unit that requires adjustment from aircraft. See
                 (“UNINSTALLING WINDOW SHADE UNIT”, section 6 & 7 pages 3002 & 3003)

                     NOTE: Assure window unit lenses, plated parts, and decorative mask parts are
                          protected at all times when work is being done.

         B.      Locate tension spring at lower back of window housing. Tension assy. is secured in
                 place w/ stop nut and loop clamp.

         C.      To remove loop clamp, un-screw stop nut and slide clamp off retainer clip

         D.      Slide loop clamp & shrink tube to side w/ spring to access ball catch assy.

         E.      Adjust ball catch assy to desired tension (See FIGURE 3, GRAPHIC 25-23-08-991-
                 003 page 3004) next page. Make adjustments one link at a time. Optimal tension does
                 not allow blind mod. to fall freely. Run shade up and down to assure it operates
                 smoothly.

         F.      When desired tension is achieved, complete steps C & D in reverse order to complete
                 adjustment.

         G.      Re-install window unit. See (“UNINSTALLING WINDOW SHADE UNIT”, section
                 6 & 7 pages 3002 & 3003). Complete these steps in reverse order.




                                                                                               PAGE 1003
                                                                                                JAN 10/05

                                         25-23-08
  Lou Martin & Assoc., Inc.
Component Maintenance Manual




 FIGURE 3, GRAPHIC 25-23-08-991-003
      Showing tension adjustment




                                      PAGE 1004
                                       JAN 10/05

     25-23-08
     Lou Martin & Assoc., Inc.
   Component Maintenance Manual




PAGE INTENTIONALLY LEFT BLANK




                                  PAGE 1005
                                   JAN 10/05

        25-23-08
                                    Lou Martin & Assoc., Inc.
                                  Component Maintenance Manual

                          UNINSTALLING WINDOW SHADE ASSY.

TASK 25-23-08-000-801

1.    General

      A.     The overhaul instructions contained in this manual are usually implemented in
             mechanical overhaul workshops.

      B.     Avoid removing identification plates, unless manufacturer authorization.

      C.     Assure window unit inner and outer lens, and any decorative plated parts are protected at
             all times when removed from the aircraft.

      D.     When removing and transporting the window unit assure the shade is in the up position.


TASK 25-23-08-940-801

2.    Job set-up information

      A.     Tools, Fixtures, equipment and materials
             None.

TASK 25-23-08-000-802


3.    Preliminary Steps

      A.     Before the uninstalling, make note of the window assy. location for efficient re-
             installation and to prevent errors.




                                                                                            PAGE 3001
                                                                                             JAN 10/05

                                         25-23-08
                                 Lou Martin & Assoc., Inc.
                               Component Maintenance Manual

TASK 25-23-08-040-801

4.    Upper window removal (Refer to FIGURE 4/ GRAPHIC 25-23-08-991-004)

      A.    Remove valance panel according to Sogerma Spec. DIT/BC/2165/015/04.

      B.    Remove curtain cartridge according to Sogerma Spec. DIT/BC/2165/015/04.

      C.    To remove upper window attachment, refer to FIGURE 4/ GRAPHIC 25-23-08-991-004
            steps 1 & 2. See page 3004




                                                                                      PAGE 3002
                                                                                       JAN 10/05

                                     25-23-08
                                Lou Martin & Assoc., Inc.
                              Component Maintenance Manual

TASK 25-23-08-040-802

5.    Lower window removal (Refer FIGURE 4/ GRAPHIC 25-23-08-991-004)

      A.    To remove lower window attachment, refer FIGURE 4/ GRAPHIC 25-23-08-991-004
            step 3. See next page.




                                                                               PAGE 3003
                                                                                JAN 10/05

                                    25-23-08
     Lou Martin & Assoc., Inc.
   Component Maintenance Manual




FIGURE 4/ GRAPHIC 25-23-08-991-004
                                     PAGE 3004
                                      JAN 10/05
         25-23-08
                                    Lou Martin & Assoc., Inc.
                                  Component Maintenance Manual

                                           DISASSEMBLY
TASK 25-23-08-000-803


1.    General

      A.     The overhaul instructions contained in this manual are usually implemented in
             mechanical overhaul workshops.

      B.     Avoid removing identification plates, unless manufacturer authorization.

      C.     Only disassemble what is necessary to do the repairs or to replace defective part(s).

      D.     When applying the following instructions, never disassemble those components, which
             have been proved to be in good condition after inspection unless their disassembly is
             necessary to get access to the defective part.

      E.     All the parts must be identified before the disassembly in order to prevent the error and to
             make the reassembly easier.

      F.     For the identification of damage or functional failure refer to:

             “INSPECTION/REPLACEMENT & REPAIR” Page 7002

TASK 25-23-08-940-803

2.    Job set-up information

      A.     Tools, fixtures, equipment and materials
             None.

TASK 25-23-08-000-804

3.    Preliminary Steps

      A.     Before the disassembly, put marks on all the parts to help the reassembly and to prevent
             errors.




                                                                                            PAGE 4001
                                                                                             JAN 10/05

                                         25-23-08
                                    Lou Martin & Assoc., Inc.
                                  Component Maintenance Manual

TASK 25-23-08-040-804

4.    Decorative mask removal

      A.     Remove mask attachment screws from back side of window assy (5 places).

      B.     Gently move mask left or right to access and remove decorative handle screws.

      C.     Remove mask

             NOTE:          Assure the decorative mask & handles are protected at all times.

TASK 25-23-08-040-805

5.    Inner lens removal

      A.     Remove screws holding the inner lens in place.

      B.     Remove inner lens protecting both sides from damage.

TASK 25-23-08-040-806

6.    Blind mod. assy. removal

      A.     Locate Tension spring at lower back of window housing (reveal). Spring is secured in
             place w/ stop nut & loop clamp.

      B.     To remove loop clamp, un-screw stop nut and slide clamp off retainer clip.

      C.     Slide loop clamp & shrink tube to side w/ spring to access tension assy.

      D.     Carefully un-tie shade string from tension assy. Assure that all components (ball chain,
             spring, shrink tube, loop clamp, & stop nut) are stored in a safe location to prevent
             damage or loss of parts during service.

      E.     Upper blind mod. is attached with two or three screws and stop nuts depending on size,
             remove stop nuts to free blind upper rail.

      F.     Slide blind mod lower rail to top of reveal to free glides from slide track, thus freeing
             blind mod. from reveal.



                                                                                              PAGE 4002
                                                                                               JAN 10/05

                                          25-23-08
                                     Lou Martin & Assoc., Inc.
                                   Component Maintenance Manual

                                          CLEANING

TASK 25-23-08-100-801

1.    General

      A.      A full cleaning is necessary before each accurate inspection to find the correct location
              and the extent of the damage.

      B.      Cleaning removes all the remaining particles, which can have an unwanted effect on the
              performance of the equipment. It also helps the possible repair.

TASK 25-23-08-940-802

2.    Job set-up information

      A.      Tools, Fixtures, equipment and materials

      NOTE:          Refer to “SPECIAL TOOLS, FIXTURES, EQUIPMENT AND MATERIALS”
                     for full details on the items used.


REFERANCE                          QTY                                  NAME
#PC-10                               AR                     NOVUS PLASITC POLISH
BRILLIANIZE                          AR                     CLEANER & POLISH
39139 (Prepsol)                      AR                     CLEANER FOR NON-FABRIC PARTS




                                                                                             PAGE 5001
                                                                                              JAN 10/05

                                          25-23-08
                                  Lou Martin & Assoc., Inc.
                                Component Maintenance Manual



TASK 25-23-08-100-802

3.    Procedure

      A.    How to use Novus Plastic Polish No. 1

            Remove surface dust with soft cloth. Shake bottle contents and apply a light mist. Spread
            evenly and buff with a clean, soft, lint-free cloth.

      B.    How to use BRILLIANIZE Cleaner & Polish

            Shake contents firmly and apply evenly to any hard, shiny, non-absorbent surface at room
            temperature. Rub gently. Before surface dries, polish with a dry lint-free cloth or non-
            damaging material, until the surface feels “as smooth as ice”.




                                   FIGURE 5/ GRAPHIC 25-23-08-991-005




                                                                                         PAGE 5002
                                                                                          JAN 10/05

                                       25-23-08
                               Lou Martin & Assoc., Inc.
                             Component Maintenance Manual

C.     Mask fabric

       The lustrous feel of Ultra Suede HPC can be maintained by a light brushing with a
medium bristle brush. In the event of a mishap, stains can be removed with detergent. Only when
required use a mild cleaning fluid from your local hardware store.

        Everyday Stains: Remove any free matter with knife or spoon. Pat the stained area with
water and mild detergent. Remove detergent solution with a clean cloth and water. Dry on warm
setting with hair dryer or naturally in the air.

        Extremely Tough Stains: For severe stains such as automotive grease use a mild solvent.
Moisten a clean cloth with a mild cleaning fluid. Pat the stained area until clean. Blot with a
clean, dry cloth.

D.     Shade fabric

         Lou Martin easy-glide shade systems utilize a metallized fabric, which is inherently anti-
static. They actually repel dust and seldom require cleaning. An occasional light sweep of a
vacuum is all that should be needed.

       In the event of a mishap, Lou Martin easy-glide shades may be cleaned with a mild
detergent and water. However, water spotting can occur. If a detergent is required, we suggest a
mild detergent such as woolite.

       NOTE:           Do not use ammonia cleaners near the Lou Martin easy-glide shade.
                       Ammonia cleaners will damage the shade.




                                                                                       PAGE 5003
                                                                                        JAN 10/05

                                    25-23-08
     Lou Martin & Assoc., Inc.
   Component Maintenance Manual




PAGE INTENTIONALLY LEFT BLANK




                                  PAGE 5004
                                   JAN 10/05


        25-23-08
                                 Lou Martin & Assoc., Inc.
                               Component Maintenance Manual
TASK 25-23-08-200-801

                              AIRWORTHINESS LIMITATIONS

1.    General

      A.     The Airworthiness Limitations section is FAA-approved and specifies maintenance
            required under §§43.16 and 91.403 of the Federal aviation regulations, unless an
            alternative program has been FAA approved.




                                                                                      PAGE 6001
                                                                                       JAN 10/05

                                      25-23-08
     Lou Martin & Assoc., Inc.
   Component Maintenance Manual




PAGE INTENTIONALLY LEFT BLANK




                                  PAGE 6002
                                   JAN 10/05

        25-23-08
                                      Lou Martin & Assoc., Inc.
                                    Component Maintenance Manual

                           INSPECTION/REPLACEMENT & REPAIR

TASK 25-23-08-300-801

1.    General

      A.     The procedures given in these chapters are general inspection and repair procedures and
             are not applicable to the riveted or welded parts. The manufacturer must repair the riveted
             or welded junctions, which are damaged.

TASK 25-23-08-940-803

2.    Job set-up information

      A.     Tools, fixtures, equipment and materials

      B.     It is recommended that the completion center contact Lou Martin & Assoc., Inc. for
             replacement parts to insure quality and operation

             NOTE: Assure window unit lenses, plated parts, decorative mask parts are protected at all
                   times when work is being done.


             (1) Repair materials


       REFERANCE                          QTY                              NAME
      #4945                                AR                     3M Acrylic foam tape
      FMR-604 (.06 Thk.)                   AR                     Replacement outer lens
      FMR-604 (.13 Thk.)                   AR                     Replacement inner lens
      8-MIL CORD (WHITE)                   AR                     Replacement shade string
      MS21044-N08                          AR                     Replacement stop nut
      MS21044-N06                          AR                     Replacement stop nut
      MS51092-6                            AR                     Replacement washer
      MS51092-8                            AR                     Replacement washer
      MS24693S-632                         AR                     Replacement screw
      MS24693S-832                         AR                     Replacement screw
      MS21059L08                           AR                     Replacement nut plate




                                                                                           PAGE 7001
                                                                                            JAN 10/05

                                         25-23-08
                                     Lou Martin & Assoc., Inc.
                                   Component Maintenance Manual
TASK 25-23-08-200-801

3.    Inspection of window unit

A.    When inspecting the window unit write all the damage detected, in some condition, the cause
      and/or the source. Immediately repair all the damage found.


B.    Visually check all hardware, detail parts and assemblies for the following criteria:

             (1)     Wear, tears, fraying of the shade & decorative mask fabric.

             (2)     Tightening of the screws and nuts

             (3)     Condition of the Inner and Outer Lenses for scratches, cracks or spots.

             (4)     Condition of the reveal for scratches, chipping or fading of the paint.

      C.     Do a careful check of all the parts for corrosion, distortion, incipient cracks, cracks,
             dents, nicks, scores, stripped threads, excessive wear, etc. which can damage the
             performance of the equipment and give it an unsatisfactory condition.

TASK 25-23-08-200-802

4.    Replacement of Parts

      After the replacement of an item, write a list of the defective parts you must replace and a list of
      the parts on which a repair or a new production is necessary.




                                                                                               PAGE 7002
                                                                                                JAN 10/05

                                          25-23-08
                                   Lou Martin & Assoc., Inc.
                                 Component Maintenance Manual
TASK 25-23-08-350-801

5.    Replacement procedure for outer lens (See FIGURE 6/ GRAPHIC 25-23-08-991-006)

      A.    Remove existing outer lens to be replaced. Note: Lens is attached w/ strong adhesive
            double-sided tape; some hard jerks may be required.

      B.    Remove used tape from reveal and clean surface with clean cloth damped with alcohol or
            prepsol.

      C.    Apply one layer of #4945 3M Acrylic foam tape to reveal, joining both ends of tape with
            a seam. (Do not overlay seam)

      D.    Locate new lens and decide which side of lens to be bonded to reveal. Remove this side’s
            protective film before bonding. Note, use a static blow-off gun to eliminate dust
            attraction.

      E.    Center the lens at one end and work towards the top evenly on both sides pressing firmly
            for bonding. Go back and press additional strokes to assure full contact all around lens.

      F.    Check lens and assure it follows reveal contour. Assure center of lens is not sunk, if so
            re-attaching lens may be required.




                                   Windows reveal snout
                            FIGURE 6/ GRAPHIC 25-23-08-991-006
                                                                                           PAGE 7003
                                                                                            JAN 10/05
                                        25-23-08
                                    Lou Martin & Assoc., Inc.
                                  Component Maintenance Manual
TASK 25-23-08-350-802

6.    Replacement procedure for broken shade string

      A.     For removal of blind mod. (See “DISASSAMBLY”, section 6 page 4002)

      B.     Remove broken string and replace with new string.

      C.     Tie upper left screw at mid way thru string and run string thru shade assy. (See FIGURE
             7/ GRAPHIC 25-23-08-991-007)

      D.     Reinsert glides into slide track and reattach to reveal.

      E.     Reattach upper blind mod. assy. (See “ASSEMBLY”, section 5 page 8002)




                              FIGURE 7/ GRAPHIC 25-23-08-991-007




                                                                                         PAGE 7004
                                                                                          JAN 10/05


                                          25-23-08
                                    Lou Martin & Assoc., Inc.
                                  Component Maintenance Manual
TASK 25-23-08-350-803

7.    Replacement procedure for a damaged inner lens

      A.     Remove decorative mask from window assy. (See “DISASSAMBLY”, section 4 page
             4002)

      B.     Mark both sides of inner lens on reveal to assure replacement inner lens is properly
             located during reassembly.

      C.     Remove inner lens from window assy. (See “DISASSEMBLY”, section 5 page 4002)

      D.     Trim replacement inner lens to size, ref table for proper sizing. (See FIGURE 8/
             GRAPHIC 25-23-02-991-008, Page 3) or match size w/ damaged inner lens.

      E.     Before attaching new lens decide which side of lens is to be attached to reveal. Remove
             this side’s protective film. Note: use a static blow-off gun to eliminate dust attraction.

      F.     Clamp replacement inner lens to window assy., assure lens follows window reveal’s
             contour. Note: it will help if the lower surface of lens is clamped first then force the lens
             to follow reveals contour then clamp upper lens surface. Test shade up & down to check
             for tension. Loose lens will ease the tension on the shade, if not refer to “Testing & Fault
             Isolation”

      G.     Attach new inner lens to window assy. Match drill lens with existing nut plate locations.
             Note: when drilling assure not to damage nut plates located on backside of reveal.
             Then remove clamps. (See “ASSEMBLY”, section 4 page 8002)




                              FIGURE 8/ GRAPHIC 25-23-08-991-008
                                                                                              PAGE 7005
                                                                                               JAN 10/05


                                          25-23-08
                                   Lou Martin & Assoc., Inc.
                                 Component Maintenance Manual
                                           ASSEMBLY

TASK 25-23-08-400-801

1.    General

      A.     Before the assembly, make sure that the CLEANING and the INSPECTION/REPAIR
             procedures of all parts are done.

      B.     Where it is possible, it is recommended to use new parts and genuine approved parts.

TASK 25-23-08-940-804

2.    Job set-up information

      A.     Tools, Fixtures, equipment and materials

             NOTE: Refer to SPECIAL TOOLS, FIXTURES, EQUIPMENT AND MATERIALS for
                   full details on the items used.


     REFFERENCE                           QTY                          NAME
      MS21044-N08                         AR                    Replacement stop nut
      MS21044-N06                         AR                    Replacement stop nut
      MS51092-6                           AR                    Replacement washer
      MS24693S-632                        AR                    Replacement screw
      MS24693S-832                        AR                    Replacement screw




                                                                                         PAGE 8001
                                                                                          JAN 10/05

                                        25-23-08
                                    Lou Martin & Assoc., Inc.
                                  Component Maintenance Manual
TASK 25-23-08-440-801

3.    Blind mod. Reattachment

      A.     Reinsert the lower rail glides into their slide tracks at top of reveal and slide down approx
             half way.

      B.     Reattach upper blind mod. to the reveal by inserting the upper rail’s screws thru the two
             existing holes in the top of the reveal cavity, and secure with MS21044-N04 or
             MS21044-N06 stop nuts.
             NOTE:          Assure a proper attachment with a min. two threads protruding thru nylon
                            nut.

      C.     Rethread shade string thru eyelets at bottom of reveal and reattach string to spring & ball
             chain.

      D.     Slide shrink tube & loop clamp over & past spring catch, re-connect spring and ball
             chain.

      E.     To adjust tension to desired level see (“Testing and Fault Isolation, section 3 page 1003)

      E.     Slide loop clamp & shrink tube to cover tension assy

      F.     Re-attach loop clamp to retainer clip and secure in place w/ MS21044-N06 stop nut.


TASK 25-23-08-440-802

4.    Inner lens reattachment

      A.     Reattach inner lens with MS24693S-832 screw and pick-up existing nut plate (8 places)

      B.     Remove protective film from inboard side of lens prior to reattaching decorative mask.




                                                                                             PAGE 8002
                                                                                              JAN 10/05


                                         25-23-08
                                  Lou Martin & Assoc., Inc.
                                Component Maintenance Manual
TASK 25-23-08-440-803

5.    Decorative mask reattachment

      A.    Place the mask over the window assy. and align decorative handle’s holes with the lower
            blind mod. attachment holes and attach using MS24693S-632 screw (2)

      B.    Align the attachment holes of the backside of reveal with those of the decorative mask,
            attach decorative mask with MS27039-832 screw pick-up existing insert (5 places)




                                                                                         PAGE 8003
                                                                                          JAN 10/05


                                       25-23-08
                                   Lou Martin & Assoc., Inc.
                                 Component Maintenance Manual
                                        FITS AND CLEARANCES

TASK 25-23-08-820-801

1.    General

      A.    The listed clearances are to insure the window is properly installed into the aircraft

TASK 25-23-08-820-802

2.    Clearances

      A.    Assure a min. clearance of .063 in. (1.59 cm) between the window shade assy. and
            existing structure.

      B.    Assure a min. clearance of .13 in. (3.18 cm) between the window assy’s outer lens and
            the inboard side of the aircraft’s existing pressure lens.

      C.    Assure a min. clearance of .04 in. (1.02 cm) between each decorative mask fwd & aft in
            the aircraft.




                                                                                            PAGE 9001
                                                                                             JAN 10/05


                                        25-23-08
     Lou Martin & Assoc., Inc.
   Component Maintenance Manual




PAGE INTENTIONALLY LEFT BLANK




                                  PAGE 9002
                                   JAN 10/05




        25-23-08
                                    Lou Martin & Assoc., Inc.
                                  Component Maintenance Manual

                               SPECIAL TOOLS, FIXTURES, EQUIPMENT

TASK 25-23-08-940-805

1.    Special tools, fixtures and equipments

      No special tools, fixtures and equipment are necessary for the maintenance or the overhaul to be
      performed on the standard equipment.

      Standard tools are used for these operations.




                                                                                         PAGE 10001
                                                                                           JAN 10/05


                                         25-23-08
                                   Lou Martin & Assoc., Inc.
                                 Component Maintenance Manual
                                             STORAGE

TASK 25-23-08-940-806

1.    General

      A.    When any of the window assay’s need to be removed from the aircraft, Lou Martin &
            Assoc., Inc. recommends to stow the shade is in the up position.

      B.    Store in a sheltered, ventilated place with normal hygrometric degree (70%)

      C.     Cover the window unit with large clean plastic bags or equivalent to protect it from dust
            and other airborne particles.

      D.    On the outside of the bag or cover add a tag with its location in the aircraft for tracking
            purposes and quicker reinstallation in the aircraft.




                                                                                            PAGE 11001
                                                                                              JAN 10/05


                                         25-23-08
     Lou Martin & Assoc., Inc.
   Component Maintenance Manual




PAGE INTENTIONALLY LEFT BLANK




                                  PAGE 11002
                                    JAN 10/05


        25-23-08
                                     Lou Martin & Assoc., Inc.
                                   Component Maintenance Manual
                                    ILLUSTRATED PARTS LIST

TASK 25-23-08-950-801

1.    Introduction

      A.     General

             (1)     The Illustrated Parts List (IPL) intends to show the details of the equipment and
                     permits easy provisioning of the spares necessary for the maintenance of this
                     equipment.

      B.     Use of the illustrated parts list

             (1)     “Introduction” section

                     The introduction contains all explanatory information for the individual sections
                     necessary for the use of this IPL.

             (2)     “Illustrated Parts List” section

                     The detailed parts list gives the list and the illustrations of parts making up the
                     considered assembly. The different columns of the parts list pages are organized
                     as follows:

                     1st column: Figure and item number
                     2nd column: Manufacturer’s part number
                     3rd column: Airline part number (not used)
                     4th column: Indenture
                     5th column: Designation
                     6th column: Usage from to
                     7th column: Quantity per Assembly

                     (a)     Figure and item number

                             1       Each illustration receives a figure number starting at 01 and
                                     carrying on in sequence.

                             2       Each illustration can be divided up into several folios

                             3       When it is necessary to add figures, alphabetic indexes are added
                                     to the original figure, from A to Z, except I and O
                                                                                             INTRO IPL
                                                                                                 PAGE 1
                                                                                              JAN 10/05


                                           25-23-08
              Lou Martin & Assoc., Inc.
            Component Maintenance Manual

      4       An item number is attributed to each part mentioned in the detailed
              parts list. Numbers start at 001A up to 999A per sequence of 10 by
              10 or else in order to insert additional items.

      5       Alternative parts have the same item as the initial part and are
              indexed.

      6       To follow the evolution of the standard of parts or assemblies
              modification, items are indexed from B to Z, except I and O.

      7       Non-illustrated items are identified by a dash placed in front of the
              item.

(b)   Manufacturer’s part number

      This column indicates the original manufacturer’s part number or the part
      manufacturer.

(c)   Airline part number

      This column is left blank; it is reserved for the airline.

(d)   Indenture

      The designation is presented according to indentations indicating as
      follows the relation between the different components:

      1 Assembly

      2 Sub-assemblies

      2 Attaching parts of the sub-assembly

      3 Constitutive parts of the sub sub-assembly

      3 Attaching parts of the sub sub-assembly

      4 Constitutive parts of the sub subassembly
        Etc.


                                                                       INTRO IPL
                                                                          PAGE 2
                                                                        JAN 10/05


                   25-23-08
                                Lou Martin & Assoc., Inc.
                              Component Maintenance Manual

                 (e)     Designation

                         The designation of the item can be followed by:

                         - The CAGE manufacturer’s code,

                         - Cross-references indicating numbers, figures, items where this very item
                           is illustrated.


                 (f)     Usage from to

                         The interchangeability relation of constitutive parts according to the
                         higher assembly is identified by the item number.

                         This code is only valid for the assembly dealt with in the corresponding
                         figure.

                         Example:


                                                  I                                   USAGE       UNITS
FIG-ITEM   PART MUMBER        AIRLINE PART        N   NOMENCLATURE                    FROM         PER
                                NUMBER            D                                     TO        ASSY.
  - 1A         PN1                                1   ASSEMBLY 1                                    RF
  - 1B         PN2                                1   ASSEMBLY 2                                    RF
  - 1C         PN3                                1   ASSEMBLY 3                                    RF
  10A          SPN1                               2   SUB-ASSEMBLY 1                   1AC           1
  10B          SNP2                               2   SUB-ASSEMBLY 2                    1B           1
  20A         SSNP1                               3   SUB SUB-ASSEMBLY 1               10A           1
  20B         SSPN2                               3   SUB SUB-ASSEMBLY 2               10B           1
  30A          SPN3                               2   SUB-ASDSEMBLY 3                                1




                                                                                         INTRO IPL
                                                                                            PAGE 3
                                                                                          JAN 10/05


                                       25-23-08
                             Lou Martin & Assoc., Inc.
                           Component Maintenance Manual
      (g)    Quantity per assy.

                     This column gives the number of parts required for an immediately higher
                     assembly.

                     If a same assembly or a same part appears in several figures, the quantity
                     is only given in the first parts list; the RF abbreviation appears in the
                     following parts list.

                     If the quantity of a component is to be established as required (EX. seal,
                     etc.) the quantity is replaces by the term AR (as required)

(2)   How to use the Illustrated Parts List

      (a)    When the part number is known:

             1       Turn to the numerical index and locate the part number.

             2       The figure and item number on the illustration where the part appears are
                     listed in the column to the right of the part number.

             3       The corresponding item number in the accompanying parts list will give
                     part number, description, assembly relationship and quantity required for
                     that particular application.

      (b)    When the part number is not known:

             1       Look through the illustrations and find the assembly of which the
                     component is part, or look through the illustrations and identify the part by
                     appearance. Note the item number in the exploded view and find part,
                     description and quantity required for that part.




                                                                                     INTRO IPL
                                                                                        PAGE 4
                                                                                      JAN 10/05


                                  25-23-08
                                Lou Martin & Assoc., Inc.
                              Component Maintenance Manual

(5)   List of abbreviations

      The following abbreviations have been used in this CMM:

      AR                       As Required. Indicates that an indefinite quantity is required
      ASSY                     Assembly
      CMM                      Component Maintenance Manual
      CAGE CODE                Commercial and Government Entity Code
      DET                      Detail
      FIG                      Figure
      H                        Horizontal
      IND                      Indenture
      IPL                      Illustrated Parts List
      LH                       Left Hand
      NHA                      Next Higher Assembly
      NP                       After any description means that this part number constitutes an
                               assembly of breakdown parts not supplied as a whole. Although
                               not procurable, a view of each assembly, sub-assembly, sub-sub-
                               assembly, or small unit, exploded as necessary to show detail parts,
                               is provided to illustrate each part in the detail parts list.
                               Illustrations of all parts will be technically correct in assembly
                               installation relation ships.
      QTY                      Quantity
      RF                       Reference indicates those parts which have their quantity listed
                               elsewhere in the Illustrated Parts List.
      R                        Recline
      RH                       Right Hand
      SYM                      Symmetrical
      V                        Vertical




                                                                                      INTRO IPL
                                                                                         PAGE 5
                                                                                       JAN 10/05


                                    25-23-08
                                 Lou Martin & Assoc., Inc.
                               Component Maintenance Manual




                            PAGE INTENTIONALLY LEFT BLANK




                                                              INTRO IPL
                                                                 PAGE 6
                                                               JAN 10/05
3.   Alphanumerical index

                                    25-23-08
                             Lou Martin & Assoc., Inc.
                           Component Maintenance Manual



     PART NUMBER             AIRLINE STOCK NUMBER     FIGURE        ITEM      TTL
                                                                            REQUIRED

     00-113M004-11                                        10         140       2

     00-113M004-13                                        10         120       2

      00-113M014-3                                        12          40       2

      00-113M014-5                                        12          10       2

     00-113M014-55                                        12          20       AR

      00-113M022-5                                        9          050       2

       875-XXXX                                           10          20       AR

        #9485PC                                           10          80       AR

    A319-113M001-51                                       13          20       3

   A319-113M004-XX                                        9          010       1
                                                          12         30

   A320-113M2165-XX                                       9          030       1

A320-113M2165-41 AND -43                                   9         020       2
                                                          10         70        2

   A320-113M2165-91                                       10          10       2

  A320-113M2165-XXX                                       9          060       1

  A320-113M2165-XXX                                       9          040       1

   A320-113M2165-93                                       12          50       AR

   A320-113M2165-109                                      9          070       2

                                                          10          90       2

        D7-XXX                                            10          30       1




                                                               ALPHANUMERICAL INDEX
                                                                             PAGE 1
                                                                           JAN 10/05
     PART NUMBER             AIRLINE STOCK NUMBER     FIGURE        ITEM      TTL
                                                                            REQUIRED

                                25-23-08
                       Lou Martin & Assoc., Inc.
                     Component Maintenance Manual

SUPPLIED W/ REVEAL                                  13          10       AR

   MS21044-N06                                      10          40       AR

   MS24693-440                                      12          30       AR

   MS24693S-632                                     10         60        AR
                                                    10         100       AR
                                                    12         60        AR

    MS51092-6                                       10          50       AR

   NAS1836-07-12                                    13          30       3

   NAS1836-08-07                                    11          20       4

    NAS548-P6                                       10         130       4




                                                         ALPHANUMERICAL INDEX
                                                                       PAGE 2
                                                                     JAN 10/05




                          25-23-08
     Lou Martin & Assoc., Inc.
   Component Maintenance Manual




   Decorative Window Shade Assy.
FIGURE 9/ GRAPHIC 25-23-08-991-009


                                     PAGE 12001-0
                                        JAN 10/05


         25-23-08
                                 Lou Martin & Assoc., Inc.
                               Component Maintenance Manual
9                                             I                       USAGE   UNITS
FIG-ITEM    PART MUMBER        AIRLINE PART   N   NOMENCLATURE        FROM     PER
                                 NUMBER       D                         TO    ASSY.
  010      A319-113M004-XX                    2   DECORATIVE MASK               1

  020      A320-113M2165-41                   3   HANDLE ASSY.                  2
               THRU -43
  030      A319-113M001-XX                    1   WINDOW REVEAL                 1

  040      A320-113M2165-XX                   1   INNER LENS                    1

  050        00-113M022-5                     1   SLIDE TRACK ASSY.             2

  060      A320-113M2165-XX                   2   BLIND MOD. ASSY.              1

  070      A320-113M2165-109                  1   OUTER LENS                    2




                                                                      PAGE 12001-1
                                                                         JAN 10/05


                                     25-23-08
      Lou Martin & Assoc., Inc.
    Component Maintenance Manual




          Blind Mod. Assy.
FIGURE 10/ GRAPHIC 25-23-08-991-010

                                      PAGE 12002-0
                                         JAN 10/05

         25-23-08
                                 Lou Martin & Assoc., Inc.
                               Component Maintenance Manual

10                                            I                             USAGE   UNITS
FIG-ITEM    PART MUMBER        AIRLINE PART   N   NOMENCLATURE              FROM     PER
                                 NUMBER       D                               TO    ASSY.
   10      A320-113M2165-91                   1   LOWER RAIL                          2

   20          875-XXX                        1   SHADE FABRIC (OUTBOARD)             1

   30          D7-XXX                         1   SHADE FABRIC (INBOARD)              1

   40        MS21044-N06                      1   STOP NUT                           AR

   50         MS51092-6                       1   WASHER                             AR

   60        MS24693S-632                     1   SCREW                              AR

   70      A320-113M02165-41                  1   HANDLE ASSY.                        2
                AND -43
   80           #9485PC                       1   3M DOUBLE SIDED TAPE               AR

   90                                         1   .05 THK. ALUM. SPACER               2

  100        MS24693S-632                     1   SCREW                              AR

  110        SUPPLIED W/                      1   END CAP                             4
                 BLIND
  120        00-113M004-13                    2   WOOD BLOCK                          2

  130        SUPPLIED W/                      1   UPPER RAIL                          1
                 BLIND
  140        00-113M004-11                    1   GLIDE                               2




                                                                            PAGE 12002-1
                                                                               JAN 10/05

                                     25-23-08
      Lou Martin & Assoc., Inc.
    Component Maintenance Manual




       Decorative Mask. Assy.
FIGURE 11/ GRAPHIC 25-23-08-991-011

                                      PAGE 12003-0
                                         JAN 10/05
         25-23-08
                               Lou Martin & Assoc., Inc.
                             Component Maintenance Manual




11                                          I                       USAGE   UNITS
FIG-ITEM   PART MUMBER       AIRLINE PART   N   NOMENCLATURE        FROM     PER
                               NUMBER       D                         TO    ASSY.
   10       SUPPLIED BY                     1   DECORAITVE FABRIC            AR
             CUSTOMER
   20       NAS1836-08-07                   1   INSERT                        4

   30      A319-113M004-XX                  1   FIBERGLASS PANEL              1




                                                                    PAGE 12003-1
                                                                       JAN 10/05




                                   25-23-08
      Lou Martin & Assoc., Inc.
    Component Maintenance Manual




            Handle Assy.
FIGURE 12/ GRAPHIC 25-23-08-991-012



                                      PAGE 12004-0
                                         JAN 10/05


         25-23-08
                                Lou Martin & Assoc., Inc.
                              Component Maintenance Manual
12                                           I                  USAGE   UNITS
FIG-ITEM   PART MUMBER        AIRLINE PART   N   NOMENCLATURE   FROM     PER
                                NUMBER       D                    TO    ASSY.
   10        00-113M014-5                    1   HANDLE                  AR

   20       00-113M015-55                    1   RETAINER                AR

   30       MS24693S-440                     1   SCREW                   AR

   40        00-113M014-3                    1   HANDLE                  AR

   50      A320-113M2165-93                  1   RETAINER                AR

   60       MS24693S-632                     1   SCREW                   AR




                                                                PAGE 12004-1
                                                                   JAN 10/05


                                    25-23-08
      Lou Martin & Assoc., Inc.
    Component Maintenance Manual




            Handle Assy.
FIGURE 13/ GRAPHIC 25-23-08-991-013


                                      PAGE 12005-0
                                         JAN 10/05

         25-23-08
                               Lou Martin & Assoc., Inc.
                             Component Maintenance Manual



13                                          I                    USAGE   UNITS
FIG-ITEM   PART MUMBER       AIRLINE PART   N   NOMENCLATURE     FROM     PER
                               NUMBER       D                      TO    ASSY.
   10      SIPPLIED WITH                    1   .25” FOAM CORE            AR
              REVEAL
   20      A319-113M001-51                  1   BLOCK                     AR

   30       NAS1836-07-12                   1   INSERT                   AR




                                                                 PAGE 12005-1
                                                                    JAN 10/05


                                   25-23-08

								
To top