dsp super eye color camera

					D.S.P Super Eye Color Camera
PIH - 70 Series
INSTRUCTION MANUAL

WARNING!
RISK OF ELECTRIC SHOCK DO NOT OPEN!
WARNING TO REDUCE RISK OF ELECTRIC SHOCK , DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION
Do not drop or strike this equipment. Sensitive electronics inside are vulnerable to excessive shock. Do not install the equipment near any naked flames or heat sources. Excessive heat could damage this unit. Do not expose this unit to rain or excessive moisture , avoid smoke and dust. Place the camera in an environmental housing for protection. If the camera gets wet , unplug it and have it checked by qualified service personnel. Do not cover cloth or to install this unit in poorly ventilated places. This may lead to overheating Do not continue to operate if there appears to be fault. If the unit ceases to function, contact qualified service personnel for help. Do not touch the power connection with wet hands. Risk of short circuit or electric shock. Do not damage the power cord or leave it under pressure. Risk of fire or shock circuit.

CONGRATULATIONS
Thank you for purchasing this high quality mono chrome camera. You now own one of the many fine products manufactured by us. This product has been carefully inspected under rigid quality standards before shipment. With reasonable care, it will provide years of reliable performance. We recommend that you read this installation and operation manual thoroughly before installing and operating your new system. Here you will find all the information you need to set up and use the system. For questions that are not answered in the manual, please contact your dealer.

IMPORTANT INFORMATION
Before proceeding, please read and observe all instructions and warnings contained in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service.

When unpacking your new camera, check for missing or damaged items. If any item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your dealer for assistance.

FOR YOUR PROTECTION
Complete the following product purchase information. The factory requests this information when contacted for technical support. It is also valuable in case of loss or theft. Purchase Date Serial Number

TABLE OF CONTENTS

FEATURES

....................................................................................................... 6 ..................................................................................... 9

MOUNTING THE LENS INSTALLATION

............................................................................................... 10 .......................................................................... 11

REAR PANEL CONNECTORS SPECIFICATION

.............................................................................................. 13

FEATURES
This 1/3" DSP Super Eye Color Camera has a Exview HAD CCD image sensor and all solid state circuitry, which will provide extremely long life and high reliability. The PIH-70 series camera offers excellent picture reproducibility with low lag and high burn resistance. It is resistant to distortion from magnetic fields, shock and vibration and will operate reliably in a wide range of temperatures. DIGITAL SIGNAL PROCESSOR DSP cameras can produce high color contrast images, enhance picture sharpness and enable the camera to work in wide range of lighting conditions. SENSITIVITY This is a highly sensitive camera with minimum scene illumination 380K/440K Pixels = 0.1 Lux at F/1.2, 0 Lux with IR (projection range 20 meters ; radiant power 300mW) ; 250K/270K Pixels = 0.01 Lux at F/1.2, 0 Lux with IR (projection range 20 meters ; radiant power 250mW) ensuring good quality images in low light environments. AUTOMATIC GAIN CONTROL Low light images are enhanced by increasing the AGC from 10dB, under normal light conditions, to 36dB under low light conditions.

ELECTRONIC SHUTTER When using manual or fixed iris lenses, the electronic shutter function controls the amount of light captured by the CCD by altering the shutter speed between 1/50(1/60) - 100,000 of a second. BACK LIGHT COMPENSATION Subjects lit from behind can be automatically enhanced through DSP control of the iris and shutter speeds, compensating for poorly illuminated scenes. AUTO WHITE BALANCE Automatic adjustment of the light source color temperature in order to maintain perfect picture color. APERTURE CORRECTION Refining captured image outlines for a sharper video image. INTERNAL / LINE LOCK With AC camera the Line Lock facility enables roll free picture switching. The Internal Sync. Function uses a crystal to control the camera frequency independently of the AC supply. (DC cameras have only Internal Sync, AC cameras have Line lock.)

ACCEPTS VIDEO OR DC DRIVE AUTO IRIS LENS Both types of Auto Iris lens can be used; video and direct (DC) drive. WIDE RANGE POWER SUPPLY 90 ~ 260Vac , 50-Hz / 60-Hz Mains versions can operate with different domestic supplies and endure spikes and power surges without risk to the camera. C OR CS MOUNT The 5mm ring can be removed fro CS mount lenses or left in place for C mount lenses.

MOUNTING THE LENS
1. 2. 3. 4. Remove the plastic cap installed to protect the CCD. Remove the silver 5mm ring if fitting a CS mount lens. Screw the lens tight into the C/CS mount. If the lens is auto iris, connect the wires to the 4-P plug pins as shown in table1, checking the instruction to see whether it is Video or DC drive. 5. If the lens is Video Drive ensure the switch at the rear of the camera is set to VS, if it is Direct Drive then set the switch to DC.
TABLE 1. Video drive 4 3 2 1 1 2 3 4 Not Used Vcc (+12V) Video Signal Ground DC drive Control (-) Control (+) Drive (+) Drive (-)

INSTALLATION
Fixing for mounting base

Adjustment for lens
71mm

126mm

UPPER / BOTTOM VIEW (Figure 1)

58.5mm

126mm

SIDE VIEW (Figure 2)

REAR PANEL CONNECTORS
4
IRIS

5
IRIS

3 2
POWER LL.PHASE IRIS LEVEL VIDEO OUT

6
POWER LL.PHASE IRIS LEVEL VIDEO OUT

1
DC12V

7

1
AC24V

PIH-7012 & PIH-7012H
IRIS

PIH-7024 & PIH-7024H
IRIS

POWER

LL.PHASE IRIS LEVEL VIDEO OUT

POWER

LL.PHASE IRIS LEVEL VIDEO OUT

1

1

PIH-7017 & PIH-7017H

PIH-7030 & PIH-7030H

1. Power input connector 2. Power LED 3. Auto iris connector 4. DC Auto Iris level adjust 5. Line lock phase adjust 6. Function switch setting OFF OFF OFF VS 7. Video output ON ON ON DC BACKLIGHT E.S AGC DC/Video Signal Auto Iris

SPECIFICATIONS
D.S.P SUPER EYE COLOR CAMERA
Model No. Power Input Voltage System Sync. Mode Pick Up Element Effective Pixels Chip Size Horizontal & Vertical Sync. Frequency Scanning System Resolution Minimum Illumination Auto Gain Control White Balance S/N Ratio Power Consumption Shutter Back Light Compensation Aperture Correction Wave Length Infra - Red Range Video Output Lens Mount Lens Selection Operating Temperature Gamma Characteristic Dimension Weight PIH-7012 PIH-7024 DC12V AC24V NTSC or PAL Internal 510(H) x 492(V) [NTSC] 500(H) x 582(V) [PAL] 6mm (H) x 4.96mm (V) 15.734KHz / 60Hz [NTSC] 15.625KHz / 50Hz [PAL] 2 1 Interlace 330TV Lines 0.01Lux , F/1.2 , 0Lux with IR (projection range 20 meters; radiant power 250mW) 36dB Variable Gain (ON/OFF) Auto More than 50dB (AGC OFF) NTSC = 3W PAL = 4W NTSC = 3.3W PAL = 4.2W 3.6W 4.5W PIH-7017 PIH-7030 AC90 ~ 260V NTSC PAL Line-lock

1/3" CCD Image Sensor (Exview HAD CCD)

(Auto or Off) 1/60(1/50) ~ 1/100,000sec. ON/OFF Horizontal and Vertical 380 ~ 1200nm 800 ~ 1200nm CVBS 1.0Vp-p , 75ohm C or CS mount DC or Video -10 ~ +50 =0.45 70mm(W) x 58mm(H) x 114mm(D) 600g

D.S.P SUPER EYE HIGH RESOLUTION COLOR CAMERA
Model No. Power Input Voltage System Sync. Mode Pick Up Element Effective Pixels Chip Size Horizontal & Vertical Sync. Frequency Scanning System Resolution Minimum Illumination Auto Gain Control White Balance S/N Ratio Power Consumption Shutter Back Light Compensation Aperture Correction Wave Length Infra - Red Range Video Output Lens Mount Lens Selection Operating Temperature Gamma Characteristic Dimension Weight PIH-7012H PIH-7024H DC12V AC24V NTSC or PAL Internal 768(H) x 494(V) [NTSC] 752(H) x 582(V) [PAL] 6mm (H) x 4.96mm (V) 15.734KHz / 60Hz [NTSC] 15.625KHz / 50Hz [PAL] 2 1 Interlace 480TV Lines 0.1Lux , F/1.2 , 0Lux with IR (projection range 20 meters; radiant power 300mW) 36dB Variable Gain (ON/OFF) Auto More than 50dB (AGC OFF) NTSC = 3.5W PAL = 4.5W NTSC = 3.7W PAL = 4.8W 4W 5W PIH-7017H PIH-7030H AC90 ~ 260V NTSC PAL Line-lock

1/3" CCD Image Sensor (Exview HAD CCD)

(Auto or Off) 1/60(1/50) ~ 1/100,000sec. ON/OFF Horizontal and Vertical 380 ~ 1200nm 800 ~ 1200nm CVBS 1.0Vp-p , 75ohm C or CS mount DC or Video -10 ~ +50 =0.45 70mm(W) x 58mm(H) x 114mm(D) 600g

DISTRIBUTOR:

PLP-7030CS-2


				
DOCUMENT INFO
Shared By:
Tags: super, color, camera
Stats:
views:137
posted:12/21/2009
language:English
pages:16
Description: dsp super eye color camera