ACCORDION PEG RACK by fjzhxb

VIEWS: 124 PAGES: 2

									ACCORDION PEG RACK
The hardware included with your new Accordion Peg Rack is listed below. Take time to identify the hardware as well as the individual parts of this product. As you unpack and prepare to assemble the Accordion Peg Rack, clear an area for assembly. The parts should be placed on a carpeted or padded area to protect them from damage. If you have any questions about this product or its assembly, please call The Land of Nod Customer Service Department at 800.933.9904.

Hardware Included: (a) Plastic anchor 3 pcs. (b) Screw 3 pcs. (c) Wood plug 3pcs. Assembly or Hanging Instructions:

Tools Needed (not provided): Hammer Philip’s Head screw driver Pencil

1. Position accordion peg rack on wall to desired height and width. While holding the rack in place, have a friend use a pencil to mark screw positions through the pre-drilled holes. 2. Drill holes as marked on the wall and insert the plastic anchors (a). Tap each anchor gently into wall with hammer until the anchor’s head is flush with the wall.

ACCORDION PEG RACK
3. Position the accordion peg rack on the wall so that the holes and anchors are aligned. Insert the screws (b) into the pre-drilled holes on the peg rack as shown above and tighten with screwdriver. 4. Place the wood plugs (c) into each hole to cover the screw heads. Cover each plug with a soft cloth and tap gently with hammer until plug is secure in place.


								
To top