Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

5884 Install electronic security

VIEWS: 6 PAGES: 4

									5884 version 4 Page 1 of 4

Install electronic security intercom equipment and peripheral devices
Level Credits Purpose 3 16 People credited with this unit standard are able to: – install intercom control equipment; – install intercom peripheral devices; and – test intercom control equipment and peripheral devices. Electronic Engineering Electronic Security Registered 18 November 1997 21 November 2008 31 December 2014 Open. Evaluation of documentation and visit by NZQA and industry. ElectroTechnology Industry Training Organisation 0003

Subfield Domain Status Status date Date version published Planned review date Entry information Accreditation

Standard setting body (SSB)

Accreditation and Moderation Action Plan (AMAP) reference

This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do. Special notes 1 2 This unit standard has been developed for learning and assessment on-job. Persons working or intending to work as a security officer or in related security employment may require a Security Guards Licence or, if an employee of a Security Guard Licence holder, a Certificate of Approval to be the Responsible Employee of a Security Guard. These licences are issued by the Registrar of Private Investigators and Security Guards.

 New Zealand Qualifications Authority 2009

5884 version 4 Page 2 of 4 3 References Building Act 1991; Electricity Act 1992; Electricity Regulations 1997; Health and Safety in Employment Act 1992; Health and Safety in Employment Regulations 1995; Private Investigators and Security Guards Act 1974; AS/NZS 3000:2007, Electrical installations (known as the Australian/New Zealand Wiring Rules); Local territorial authority requirements; and all subsequent amendments and replacements. Intercom system types include but are not limited to – audio only systems, audio video systems, all master systems, master slave systems. Systems may be hard wired audio or video, or radio. Peripheral devices include but are not limited to – remote slave audio units, remote slave audio video units, power supplies, microphone, speakers, impedance matching transformer, horn speaker, interfaces to other systems. Evidence is required for five peripheral devices.

4

5

Elements and performance criteria
Element 1 Install intercom control equipment. Range equipment includes but is not limited to – master and slave audio stations, video interphone master and slave, single and multi station call up panel, power supply, amplifier.

Performance criteria 1.1 Control equipment required is listed according to installation specification or agreed customer needs. Control equipment is verified against design or supplied installation specification before installation. Installation of control equipment is completed in accordance with manufacturer’s installation requirements and current industry practice. Interconnections between control equipment items are completed with efficient technique, and allow for ease of servicing and identification. Range efficient technique includes but is not limited to – cable dressing, terminations, looming, tidiness, cleanliness, soldering, crimping, timing.

1.2

1.3

1.4

 New Zealand Qualifications Authority 2009

5884 version 4 Page 3 of 4 Element 2 Install intercom peripheral devices. Performance criteria 2.1 Installation of peripheral devices is in accordance with manufacturer’s recommendations. Installation of peripheral devices is completed to customer satisfaction and in accordance with industry practice. Interconnections between peripheral devices and control equipment are completed with efficient technique, and allow for ease of servicing and identification. Range efficient technique includes but is not limited to – cable dressing, cable selection, terminations, looming, tidiness, cleanliness, soldering, crimping, timing.

2.2

2.3

Element 3 Test intercom control equipment and peripheral devices Performance criteria 3.1 Control equipment and peripheral devices are confirmed to be operational and fit for purpose. The performance of the control equipment and peripheral devices is recorded and compared to the manufacturer’s specification. The performance of the control equipment and peripheral devices meets customer expectations and design specifications. Tests are completed to identify typical system deficiencies. Range typical system deficiencies – audible hum, electronic noise, poor speech reproduction, poor quality video, audio feedback.

3.2

3.3

3.4

3.5 3.6

Test results are recorded according to enterprise requirements. Adjustments or replacements are completed to remedy any detected system performance failure or deficiency.

Please note Providers must be accredited by NZQA, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.

 New Zealand Qualifications Authority 2009

5884 version 4 Page 4 of 4 Industry Training Organisations must be accredited by NZQA before they can register credits from assessment against unit standards. Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards. Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Comments on this unit standard Please contact the ElectroTechnology Industry Training Organisation at reviewcomments@etito.co.nz if you wish to suggest changes to the content of this unit standard.

 New Zealand Qualifications Authority 2009


								
To top