Docstoc
EXCLUSIVE OFFER FOR DOCSTOC USERS
Try the all-new QuickBooks Online for FREE.  No credit card required.

buspirone hydrochloride buspirone hydrochloride contains not less

Document Sample
buspirone hydrochloride buspirone hydrochloride contains not less Powered By Docstoc
					Buspirone Hydrochloride
Buspirone Hydrochloride

Top Previous Next

C21H31 N5 O2·HCl

421.96

8-Azaspiro[4,5]decane-7,9-dione, 8-[4-[4-(2-pyrimidinyl)-1-piperazinylbutyl-, monohydrochloride. N-[4-[4-(2-Pyrimidinyl)-1-piperazinyl]butyl]-1,1-cyclopentanediacetamide monohydrochloride [33386-08-2; 36505-84-7].

» Buspirone Hydrochloride contains not less than 97.5 percent and not more than 102.5 percent of C21H31N5O2·HCl, calculated on the as-is basis.
Packaging and storage— Preserve in tight, light-resistant containers, at controlled room temperature. USP Reference standards 11 — USP Buspirone Hydrochloride RS. Identification— A: Infrared Absorption 197K .

B: The relative retention time of the major peak in the chromatogram of the Assay preparation corresponds to that in the chromatogram of the Standard preparation, as obtained in the Assay. Water, Method I 921 : not more than 0.5%. 281 : not more than 0.5%. 231 : not more than 0.002%.

Residue on ignition

Heavy metals, Method II

Content of chloride— Dissolve about 400 mg, accurately weighed, in 20 mL of water. Add 3 mL of nitric acid and 20.0 mL of 0.1 N silver nitrate VS. Gently boil the mixture for about 5 minutes. Filter, rinse the flask with about 80 mL of water divided into small portions, and filter each portion. Add 2 mL of 8% ferric ammonium sulfate. While stirring rapidly, titrate the excess silver nitrate with 0.1 N ammonium thiocyanate VS from a buret to a faint red-brown endpoint. Perform a blank determination (see Residual Titrations under Titrimetry 541 . Each mL of 0.1 N silver nitrate consumed is equivalent to 3.545 mg of chloride: between 8.0% and 8.8% is found. Assay— Buffer solution— Transfer 1.36 g of monobasic potassium phosphate to a 1000-mL volumetric flask, dissolve in and dilute with water to volume, and mix. Adjust the solution with 10% sodium

hydroxide (w/v) to a pH of 7.5, and filter. Mobile phase— Prepare a filtered and degassed mixture of Buffer solution and acetonitrile (60:40). Make adjustments if necessary (see System Suitability under Chromatography 621 ).

Internal standard solution— Prepare a stock solution of propylparaben in methanol having a concentration of 2.5 mg per mL. Dilute 25.0 mL of the stock solution quantitatively with water to 500.0 mL, and mix. Standard stock solution— Transfer about 50 mg of USP Buspirone Hydrochloride RS, accurately weighed, to a 100-mL volumetric flask, dissolve in 25 mL of 1 N hydrochloric acid, dilute with water to volume, and mix. Standard preparation— Transfer 10.0 mL of the Standard stock solution to a 50-mL volumetric flask, add 10.0 mL of Internal standard solution, dilute with water to volume, and mix. Assay preparation— Transfer about 50 mg of Buspirone Hydrochloride, accurately weighed, to a 100-mL volumetric flask, add 25 mL of 1 N hydrochloric acid, dilute with water to volume, and mix. Transfer 10.0 mL of this solution to a 50-mL volumetric flask, add 10.0 mL of the Internal standard solution, dilute with water to volume, and mix. Chromatographic system (see Chromatography 621 )— The liquid chromatograph is equipped with a 254-nm detector and a 3.9-mm × 30-cm column that contains packing L1. The flow rate is about 2 mL per minute. Chromatograph the Standard preparation, and record the peak responses as directed for Procedure: the resolution, R, between buspirone hydrochloride and the internal standard is not less than 4; and the relative standard deviation determined from the buspirone peak response for replicate injections is not more than 2.0%. Procedure— Separately inject equal volumes (about 25 µL) of the Standard preparation and the Assay preparation into the chromatograph, record the chromatograms, and measure the responses for the major peaks. The relative retention times of propylparaben and buspirone hydrochloride are about 0.55 and 1.0, respectively. Calculate the quantity, in mg, of C21H 31N 5O2·HCl in the portion of Buspirone Hydrochloride taken by the formula: 500C(R / R )
U S

in which C is the concentration, in mg per mL, of USP Buspirone Hydrochloride RS in the Standard preparation; and R and R are the peak response ratios of buspirone hydrochloride to
U S

propylparaben obtained from the Assay preparation and the Standard preparation, respectively. Auxiliary Information— Staff Liaison : Ravi Ravichandran, Ph.D., Senior Scientist Expert Committee : (MDPP05) Monograph Development-Psychiatrics and Psychoactives USP30–NF25 Page 1569 Pharmacopeial Forum : Volume No. 31(3) Page 742 Phone Number : 1-301-816-8330


				
DOCUMENT INFO
Shared By:
Stats:
views:27
posted:12/20/2009
language:English
pages:2
Description: buspirone hydrochloride buspirone hydrochloride contains not less