Docstoc

Multichoice DSTV Decoder

Document Sample
Multichoice DSTV Decoder Powered By Docstoc
					Multichoice DSTV Decoder
Part 1 Before setting up your decoder, please ensure that your decoder software is upgraded to the latest version. To perform a software upgrade:  Press the MENU button.  Select "ADVANCED OPTIONS" and press OK.  Select "DSD UPGRADE" and press OK. The decoder should start to upgrade the software now. If you are not sure about the version of your decoder software, you can contact Multichoice or your local DSTV technician/supplier and they will be able to help you. Part 2 How to setup your decoder to receive Impact Radio and other Christian television channels on the PUBLIC PAS7/10 bouquet:  Turn both your television set and decoder on. Then with your remote, follow the rest of the instructions.  Press the MENU button.  This gives you a list of options, scroll down to the 7th option "ADVANCED OPTIONS" using the down arrow and press OK.  On the new list which appears, select option 1, "DISH INSTALLATION" and press OK.  Enter the pin code, "9949" on this screen with the numbered buttons.  The next screen to appear is the "NETWORK CONFIGURATION" menu. To set up Network 2:  Scroll down to option 2 "NETWORK 2" and while it is highlighted, select "OTHER" with the left/right arrow button and press OK.  The Network 2 Configuration screen is displayed.  Check the "FREQUENCY" - option 6 - and ensure that is set to 11170Mhz. If the frequency is incorrect or not set at all, select option 6 with the up/down arrow button, press OK and enter the correct frequency with the numbered buttons. Press OK again after entering the frequency.  Check the "SYMBOL RATE" - option 7 - and ensure that is set to 26652. If the symbol rate is incorrect or not set at all, select option 7 with the up/down arrow button, press OK and enter the correct frequency with the numbered buttons. Press OK again after entering the symbol rate.

 Check the "FEC" - option 8 - and ensure that is set to "2/3". If the FEC is incorrect or not set at all, select option 8 with the up/down arrow button, press OK and select the correct FEC with the up/down arrow button. Press OK again after entering the FEC.  Check the "POLARISATION" - option 9 - and ensure that it is set to Vertical. If the polarisation is incorrect or not set at all, select option 9 with the up/down arrow button, press OK and select the correct polarisation with the up/down arrow button. Press OK again after entering the polarisation.  When the frequency, symbol rate, FEC and polarisation settings are all correct, select option 11 "ACCEPT ALL DISPLAYED VALUES AND LEAVE SCREEN" with the up/down arrow button and press OK.  The "NETWORK CONFIGURATION" menu is displayed again. To set up Network 3: Perform the same instructions as for Network 2, but change the following to:  (6)FREQUENCY: 11170;  (7)SYMBOL RATE: 26652;  (8)FEC: 5/6;  (9)POLARISATION: Vertical;  When the frequency, symbol rate, FEC and polarisation settings are all correct, select option 11 "ACCEPT ALL DISPLAYED VALUES AND LEAVE SCREEN" with the up/down arrow button and press OK.  The "NETWORK CONFIGURATION" menu is displayed again. To set up Network 4:  Scroll down to option 4 "MORE NETWORKS" and press OK.  Another menu screen appears listing Network 4, 5 and 6.  Highlight option 1 "NETWORK 4" and select "OTHER" with the left/right arrow button and press OK. Perform the same instructions as for Network 2, but change the following to:  (6)FREQUENCY: 12682;  (7)SYMBOL RATE: 26652;  (8)FEC: 3/4;  (9)POLARISATION: Horizontal;  When the frequency, symbol rate, FEC and polarisation settings are all correct, select option 11 "ACCEPT ALL DISPLAYED VALUES AND LEAVE SCREEN" with the up/down arrow button and press OK.  The "NETWORK CONFIGURATION" menu is displayed again. To set up Network 5:

Perform the same instructions as for Network 4, but change the following to:

 (6)FREQUENCY: 11170;  (7)SYMBOL RATE: 26652;  (8)FEC: 3/4;  (9)POLARISATION: Vertical;
 When the frequency, symbol rate, FEC and polarisation settings are all correct, select option 11 "ACCEPT ALL DISPLAYED VALUES AND LEAVE SCREEN" with the up/down arrow button and press OK.  The "NETWORK CONFIGURATION" menu is displayed again. To set up Network 6: Perform the same instructions as for Network 4, but change the following to: - (6)FREQUENCY: 11170; - (7)SYMBOL RATE: 26652; - (8)FEC: 3/4; - (9)POLARISATION: Vertical; - When the frequency, symbol rate, FEC and polarisation settings are all correct, select option 11 "ACCEPT ALL DISPLAYED VALUES AND LEAVE SCREEN" with the up/down arrow button and press OK. - The "NETWORK CONFIGURATION" menu is displayed again. To rescan all the network settings: Select "SCAN NEW NETWORKS" - option 5 - if it is available and press OK, else if it is grayed out, select option 6 "SCAN ALL NETWORKS" and press

OK.
The decoder will rescan all the channels on the public bouquet. This process might take some time, but be patient. After the scanning is complete, the decoder should return to the regular DSTV bouquet. To return to the public bouquet, press the TV button, select "PUBLIC PAS7/10" and press OK. To go to the audio channels, press the Music Note button - or if you have one button to switch between Audio and Video, you have to press the SHIFT button first.


				
DOCUMENT INFO
Shared By:
Stats:
views:1364
posted:12/19/2009
language:English
pages:3
Description: Multichoice DSTV Decoder