Get documents about "MS4477 NEW Minerva MZX-c Conventional Panels Marketing Bulletin
Document Sample
Bulletin Number: MS4477 Date Of Issue: 03 September 2009
Sales Channel Product Range Campaign
All FIRE DETECTION Product Launch
New Minerva MZX-c Conventional Twin Wire Panel
Tyco Safety Products are pleased to announce the
introduction of the Minerva MZX-c range of
conventional twin wire fire alarm control panels. The
Minerva MZX-c range will satisfy a wide range of
applications from 2 to 8 zones and has many features
that are normally associated with more expensive
addressable systems.
The Minerva MZX-c range of conventional fire
detection control panels are designed to be both
installer and user friendly. A high degree of flexibility
and programmability allows the systems to be
customised without the need for any configuration
software. The range consists of 2, 4 and 8 zone
panels together with an 8 zone repeater which is
compatible with the 4 and 8 zone variants. The
matching repeater panel has an inbuilt 240Vac power
supply.
All the units are designed and manufactured to the highest standard and the range is approved by the Loss
Prevention Certification Board (LPCB) to EN54 parts 2 and 4.
FEATURES:
• 2, 4 and 8 zone versions available.
• Supports the complete range of EN54 approved series 600 detectors including photo multi-sensor and
CO multi-sensor.
• Supports Tyco twin wire sounders on all eight detection zones.
• Drives up to 3 repeater panels (4 and 8 zone panels).
• Access to controls via key switch.
• Space for 2 x 3.4 A/H batteries providing up to 72 hour standby.
• Remote control inputs for class change, alert, evacuate, silence alarms and reset.
• Zone 1 configurable for latching or non latching.
• Selectable zonal or general alarm sounder operation.
• Alert sounder option.
• Configurable zone co-incidence for automatic detectors.
• Fully monitored fire signalling output.
• Single pole volt free change over fire relay output.
• Single pole volt free change over fail safe fault relay output.
• Short circuit fire option
• Auxiliary 24VDC 250mA power supply output.
• Open collector output for buzzer active, disablement active and evacuate active.
• Earth fault monitoring.
• Zone/Output disablement for each zone, fire signal output and all sounders.
• Buzzer disable feature.
• One man zone test.
• One man sounder test.
• Automatic fire detector and manual alarm call point fire event discrimination.
• Alarm counter.
• Compatible with diode bases for detector removal
MS4477 Page 1 of 3 Date Of Issue: 03/09/2009
Tyco Confidential Document
TRAINING:
A Sales Information Document (SID) and training resource material is available for download from the TYCO
EMEA website. Please contact your local Business Development Manager for sales training.
The following Minerva MZX-c Controllers, Repeaters and Spares are stocked at the Letchworth Tyco Shared
Service Distribution Centre.
Part Number Description
508.031.004.EG MZX-c 2 ZONE PANEL TYCO 2 WIRE
508.031.005.EG MZX-c 4 ZONE PANEL TYCO 2 WIRE
508.031.006.EG MZX-c 8 ZONE PANEL TYCO 2 WIRE
508.031.016.EG MZX-c 8 ZONE REPEATER PANEL
2605508 2 ZONE 2 WIRE MZX-c MOTHERBOARD SPARE
2605509 4 ZONE 2 WIRE MZX-c MOTHERBOARD SPARE
2605510 8 ZONE 2 WIRE MZX-c MOTHERBOARD SPARE
2605505 MZX-c MOTHERBOARD 8 ZONE REPEATER SPARE
BAQ35T-24 MZX-c POWER SUPPLY SPARE
Prices are available on your ERP system or please contact customer services at the Tyco Shared Service
Distribution Centre.
The MZX -c panels and repeater replace the MXC panels and repeater. Spares for the MXC panels and
repeater will continue to be available.
The following parts will be made obsolete once stock is exhausted:-
Part Number Description
508.030.102 MXC104PU UK 4 ZONE STANDARD EN54 PANEL
508.030.201 MXC202PU UK 2 ZONE LOOP POWERED EN54 PANEL
508.030.202 MXC204PU UK 4 ZONE LOOP POWERED EN54 PANEL
508.030.203 MXC208PU UK 8 ZONE LOOP POWERED EN54 PANEL
509.030.001 MXCIOP UK I/O PANEL EXPANSION CARD
508.030.301 MXC ADVANCED PROGRAM OVERLAY
MS4477 Page 2 of 3 Date Of Issue: 03/09/2009
Tyco Confidential Document
For further information contact your local Tyco Safety Products Business Development Manager.
Business Region Contact Number E-Mail
Development Manager
Mike Fanthorpe U.K. +44 (0) 7703 34 0192 mfanthorpe@tycoint.com
Brian Kluyskens Northern Europe +31(0) 6250 91415 bkluyskens@tycoint.com
Martin Nerad Central Europe +420 (0) 724 205 795 mnerad@tycoint.com
Peter Hauser Southern Europe +34 (0) 618778650 pjhauser@tycoint.com
Jason Mather Middle East +971 (0) 50 557 3803 jamather@tycoint.com
Jonathan Gilbert Marine & Special Hazard +44 (0) 7713 332919 jgilbert@tycoint.com
Til Mittlmeier Care Communications +49 89 354754 36 tmittlmeier@tycoint.com
TSP European Technical Support Centre: +800 CALL TYCO (+800 2255 8926)
European Direct Number: +31 475 352 722
Website: http://www.tycoemea.com/English/Products/Fire.asp
Bulletin Distribution: ADT UK X TFIS UK X Marine
ADT Europe TFIS Europe EMEA ACVS
Asia X Australia
Bulletin Web Location: Fire Detection/Minerva/MX Control Panels/MZX-c
PCT Reference No: N/A
MS4477 Page 3 of 3 Date Of Issue: 03/09/2009
Tyco Confidential Document
Related docs
