Material Safety Data Sheet May be used to comply with OSHA's Hazard Communication Standard, 29 CFR 1910.1200. Standard must be consulted for specific requirements.
U.S Department of Labor Occupational Safety and Health Administration (Non-Mandatory Form) Form Approved OMB No. 1218-0072
IDENTITY (As Used on Label and List)
Bonide Mite & Insect Spray Section I
ID No. 4115
Date: December 6, 1998
____________________________________________________________________________________________________________________________________________________________
Bonide Products, Inc. 2 Wurz Ave Yorkville, NY 13495
(800) 424-9300 (315) 736-8231
Section II - Hazardous Ingredients/Identity
____________________________________________________________________________________________________________________________________________________________
Hazardous Components (Specific Chemical Identity: Common Name(s)
OSHA PEL
ACGIH TLV
Other Limits
% (Optional)
Malathion RQ-ORM-A NA 2783 CAS #121-75-5 Lindane RQ-ORM-A NA 2761 CAS #58-89-9 Carbaryl CAS #63-25-2 Kelthane CAS115-32-2
Section III - Physical/Chemical Ingredients
____________________________________________________________________________________________________________________________________________________________
BOILING POINT: NA VAPOR PRESSURE 68 F (MM Mercury): NA VAPOR DENSITY (Air=1): NA EVAPORATION RATE (Butyl Acetate=1): NA MELTING OR FREEZING POINT: 10 F SPECIFIC GRAVITY (Water=1): 8.27 #/g PERCENT VOLATILE (by weight): NA SOLUBILITY IN WATER: Soluble APPEARANCE AND ODOR: Light amber, solvent odor pH: 7.8
Section IV - Fire and Explosion Data
____________________________________________________________________________________________________________________________________________________________
FLASHPOINT: 110 F TCC LEL: NA UEL: NA AUTO IGNITION TEMPERATURE: NA MINIMUM EXPLOSION CONCENTRATIONS (oz/cu ft): NA ENERGY TO IGNITE (Millijoules): NA EXTINGUISHING MEDIA: Foam, Alcohol Foam, CO2, Dry Chemical SPECIAL FIRE FIGHTING PROCEDURES: Backpacks and protective gear needed. Avoid use of water to reduce contamination hazard. UNUSUAL FIRE & EXPLOSION HAZARDS: None
Section V - Reactivity Data
____________________________________________________________________________________________________________________________________________________________
STABILITY: Stable CONDITIONS TO AVOID: Extreme hot or cold. HAZARDOUS DECOMPOSITION PRODUCTS: None CONDITIONS TO AVOID: None HAZARDOUS POLYMERIZATION: Will not occur INCOMPATIBILITY (Materials to Avoid): Note proper pesticide mixing procedures.
Section VI - Health Hazard Information
____________________________________________________________________________________________________________________________________________________________
RECOMMENDED HEALTH GUIDE TWA (Maximum time weighted average concentration for 8 hr. work period): None EFFECTS OF OVEREXPOSURE: Cholinesterase inhibition. EMERGENCY AND FIRST AID PROCEDURES: INHALATION: Move subject to fresh air. Apply artificial respiration if necessary and seek medical attention. EYE CONTACT: Flush eyes with water for 15 minutes. Call physician. SKIN CONTACT: Remove contaminated clothing. Wash with soap and water. INGESTION: Call physician. Do not induce vomiting-solvent presents aspiration hazard. Gastric lavage is recommended.
mitespry
Bonide Mite & Insect Spray
page 2 of 2
Section VII - Precautions for Safe Handling/Use
____________________________________________________________________________________________________________________________________________________________
STORAGE: Store in a cool, dry place. Maximum temperature of 90 F; Minimum temperature of 45 F. Store tightly sealed in area inaccessible to children and pets. PERSONAL PROTECTIONS AND CONTROL MEASURES: VENTILATION: Use outdoors. If spill indoors, open windows and use fans to air out. RESPIRATORY PROTECTION: Do not breath mist, spray or vapor. PROTECTIVE GLOVES: Rubber EYE PROTECTION: Goggles OTHER PROTECTIVE EQUIPMENT: Coveralls
Section VIII - Environmental and Disposal Information
____________________________________________________________________________________________________________________________________________________________
SPILL OR LEAK PROCEDURES: Avoid contact with spilled material. Extinguish all flames and pilot lights in vicinity. Soak up with absorbent material. If spill indoors, open windows and use fans. WASTE DISPOSAL METHOD: Soak up with absorbent material. Small spills may be placed in original container, wrapped in paper and placed in trash. For larger spill, contact State and local authorities.
KEEP OUT OF REACH OF CHILDREN
ABBREVIATION KEY
____________________________________________________________________________________________________________________________________________________________
N/A: NOT AVAILABLE OR APPLICABLE TLV: THRESHOLD LIMIT VALUE STEL: SHORT TERM EXPOSURE LIMIT
N/E: NOT ESTABLISHED TWA: TIME WEIGHTED AVG./8 HOUR WORKDAY D.O.T.: DEPARTMENT OF TRANSPORTATION
DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIES
Buyer assumes all risks of use, storage and handling of this material not in strict accordance with directions given herewith.
mitespry