SECTION: 3.20.190
FM1572 0706 Supersedes 0106 MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347 SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961 (502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624
Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies.
visit our web site: www.zoeller.com
ZOELLER ON-SITE WASTEWATER PRODUCTS
Zoeller Septic Tank Risers
Septic tank risers are an important part of any on-site treatment system. Risers allow access to septic or pump tanks in order to monitor system performance. Periodic maintenance costs are lowered due to accessibility to tanks. Many codes require risers on new installations. Zoeller Septic Tank Risers can be adapted to both new and existing installations. All materials are noncorrosive and environmentally safe. 12", 24" & 30" Diameter Riser Features: • Height is easily adjustable in the field by cutting riser between any two ribs. • Cover is green in color and has attractive texture to blend in with surroundings. • All risers and covers are wheel load rated for 2500 pounds for added strength and durability. • Riser pipes are ribbed for extra strong construction. • Components are watertight to avoid unwanted ground water infiltration. • Screws are square head (#3 Robertson) for extra added security. • PVC riser, stainless steel screws, and fiberglass UV stabilized cover are all included for easy, quick ordering. Lifetime Warranty - Every Zoeller riser is guaranteed to be free from defects in materials and workmanship for the lifetime of the homeowner/ purchaser. Free repair or replacement, excluding labor, will be made on return of the riser prepaid to the factory. This warranty is limited to product proven to be free from abuse or improper installation.
12" SEPTIC TANK RISER 24" SEPTIC TANK RISER P/N 014514
30" SEPTIC TANK RISER
12" SEPTIC TANK RISER
Part Number Riser Height
24" SEPTIC TANK RISER
Part Number Riser Height
30" SEPTIC TANK RISER
Part Number Riser Height
--5083-0001 --5083-0003 5083-0004 5083-0002 -------
--1' --2' 3' 38" -------
172-0018 172-0003 172-0044 172-0004 172-0005 172-0006 172-0007 172-0008 172-0009
8" 1' 18" 2' 3' 4' 5' 6' 7'
172-0028 172-0029 172-0045 172-0030 172-0031 172-0032 172-0033 172-0034 172-0035
8" 1' 18" 2' 3' 4' 5' 6' 7'
© Copyright 2006 Zoeller Co. All rights reserved.
Mounting Options
CAST IN PLACE P/N 172-0058 for 24" dia. risers. Deluxe coupling and sealant extension kit. Risers can be cast in place and coupling can be used to extend riser. BOLT DOWN KIT P/N 172-0047 (24" dia. risers) P/N 172-0057 (12" and 30" dia. risers) Bolt down kit with sealant for securing riser to flat tank top where riser will cover tank opening.
SEALANT
LOUISVILLE, KY
SK2294B
FLAT END OF RISER RING
SEAL RING P/N 172-0048 34" outer diameter ring for 24" dia. risers. P/N 172-0049 36" outer diameter ring for 30" dia. risers. P/N 172-0052 Expanding foam sealant. For mounting risers to oversized opening. (Uses expanding foam sealant to secure)
EXPANDING FOAM SEALANT
SEALANT
SK2294A
(24" SEAL RING) 24" MAX ROUND OPENING 24" MAX SQUARE OPENING (30" SEAL RING) 30" MAX ROUND OPENING 25.5" MAX SQUARE OPENING
SK2294C
CAST IN PLACE (Alternative) Coupling can be cast in place.
EPOXY MOUNTING P/N 172-0019 Quart Wgt. 1.0 lb. For mounting riser in a precast groove.
EPOXY
SEALANT
SK2294F
2" WIDE X 1 1/2" DEEP GROOVE RECOMMENDED
SK2294D
Lockable Latch 172-0020* 24" Diameter Riser 172-0056* 30" Diameter Riser
*3/16" Shackled locks required (Not Included)
Accessories
Wgt. 1.0 lb. Wgt. 1.0 lb. Pipe Seals
NOMINAL PIPE SIZE HOLE SAW SIZE
Part Number
Nominal Pipe Size
38
Hole Saw Dia.
Weight
014502 014503 014504 014505 008813
/"
IPS IPS IPS IPS
1" 1.25" 1.25" 1.75" 2" 2.5" 3" 4" 5"
0.5 lb. 0.5 lb. 0.5 lb. 0.5 lb. 0.5 lb. 0.5 lb. 0.5 lb. 0.5 lb. 0.5 lb.
½" ¾" 1"
1¼" IPS 1½" IPS 2" 3" 4" IPS IPS IPS
SK2294E SK1838B
005882 005588 005587 005196
Lid Only with SS Screws 5083-0006 Lid only 12" Wgt. 2 lbs. 17-0275 Lid only 24" Wgt. 16 lbs. 17-0342 Lid only 30" Wgt. 24 lbs.
ALL ZOELLER ON-SITE WASTEWATER PRODUCTS MUST BE INSTALLED IN ACCORDANCE WITH LOCAL AND/OR STATE PLUMBING AND/OR HEALTH DEPARTMENT CODES. © Copyright 2006 Zoeller Co. All rights reserved.