5420139pdf
Document Sample


- - - - - - - - - - - - - - - - MATERIAL SAFETY DATA SHEET - - - - - - - - - - - - - - -
Durvet DURVAC ERYSIPELAS BACTERIN
MANUFACTURED FOR DURVET, INC. -----------------------------------------------------------
BY BIOCOR, INC SECTION 7 - PRECAUTION FOR SAFE HANDLING AND USE
----------------------------------------------------------- -----------------------------------------------------------
SECTION 1 - PRODUCT INFORMATION STEPS TO BE TAKEN IF PRODUCT IS RELEASED OR SPILLED:
----------------------------------------------------------- For small spills mop or wipe up.
MANUFACTURER: BIOCOR, INC For large spills absorb with non-combustible material.
2720 N. 84TH STREET Keep out of sewers, storm drains, surface water and soil.
P.O. BOX 34325 WASTE DISPOSAL METHOD: Incinerate in accordance with
OMAHA, NE 68134 federal, state and local regulations.
DATE: March 25, 1994 PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Shake
PRODUCT NAME: Erysipelothrix Rhusiopathiae Bacterin well. Use entire contents when first opened. Do not
PRODUCT CODE: 2641.00 (Prefix No. 23) vaccinate within 60 days of slaughter. Store at 2 to 7
EMERGENCY PHONE: (402) 393-7440 deg C (35 to 45 deg F). Contains merthiolate as a
----------------------------------------------------------- preservative.
SECTION 2 - HAZARDOUS INGREDIENTS -----------------------------------------------------------
----------------------------------------------------------- SECTION 8 - CONTROL MEASURES
Ingredient CAS RN OSHA PEL ACGIH TLV -----------------------------------------------------------
----------------------------------------------------------- RESPIRATORY PROTECTION: Not applicable
Formaldehyde 50-00-0 0.75 ppm (TWA) 0.3 ppm (c) VENTILATION: Local exhaust
2 ppm (STEL) PROTECTIVE GLOVES: Recommended (latex)
----------------------------------------------------------- EYE PROTECTION: Safety glasses with side shields.
SECTION 3 - PHYSICAL/CHEMICAL CHARACTERISTICS -----------------------------------------------------------
----------------------------------------------------------- SECTION 9 - DISCLAIMER
BOILING POINT: NA -----------------------------------------------------------
SPECIFIC GRAVITY: 1.01-1.03 The information contained herein is believed to be correct,
VAPOR PRESSURE: NA but is offered only as a guide. BioCor, Inc. disclaims any
SOLUBILITY IN WATER: Aqueous express or implied warranty as to the accuracy of the
EVAPORATION RATE: NA information, and shall not be held liable for any direct,
MELTING POINT: NA incidental, or consequential damages resulting from
APPEARANCE AND ODOR: Cream to light brown, opaque liquid. reliance on the information.
----------------------------------------------------------- -----------------------------------------------------------
SECTION 4 - FIRE AND EXPLOSION HAZARDS MSDS: #1/#2024
----------------------------------------------------------- -----------------------------------------------------------
FLASH POINT: NA DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIES: Although
LEL/UEL: NA reasonable care has been taken in the preparation of this
SPECIAL FIRE FIGHTING PROCEDURES: None document, we extend no warranties and make no
UNUSUAL FIRE AND EXPLOSION HAZARDS: None representation as to the accuracy or completeness of the
----------------------------------------------------------- information contained therein, and assume no responsibility
SECTION 5 - REACTIVITY regarding the suitability of this information for the
----------------------------------------------------------- user's intended purposes or for the consequences of its
STABILITY: Stable use. Each individual should make a determination as to the
INCOMPATIBILITY: None suitability of the information for their particular
HAZARDOUS DECOMPOSITION PRODUCTS: CO, CO2, and NOx. purpose(s). A request has been made to the manufacturer to
HAZARDOUS POLYMERIZATION: Does not occur approve the contents of this material safety data sheet.
CONDITIONS TO AVOID: None Upon receipt a new MSDS will be made available.
----------------------------------------------------------- -----------------------------------------------------------
SECTION 6 - HEALTH HAZARD DATA COMPAS Code: 54201390
-----------------------------------------------------------
Health hazards are not anticipated for persons using this
product as directed under field conditions. In case of
accidental exposure, follow the instructions listed
below:
EYE CONTACT: Flush eyes with flowing tap water for 15
minutes.
SKIN CONTACT: Wash thoroughly with soap and water.
INGESTION: Contact a physician or poison control center.
INJECTION: Contact a physician or poison control center.
Review status of tetanus immunization. Consider
antibiotic therapy to control infection.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:
Allergies to product constituents.
Page 1 of 1
Get documents about "