5420135pdf

							MATERIAL SAFETY DATA SHEET




         PRODUCT NAME:
       Durvet Duramycin 10




   MANUFACTURED FOR DURVET
        BY WADE JONES




           A Service of
MATERIAL SAFETY DATA SHEET
DURVET – DURAMYCIN 10

SECTION 1 – PRODUCT INFORMATION

Manufacturer: Wade Jones Company
Address: Hwy 71 North, P.O. Box 309, Lowell, AR 72745
Emergency Telephone Number: (800) 344-9400 Chemtrec (800) 424-9300
Product Identification: TET SOL 10
Chemical Name: N/A
Chemical Family: Tetracycline HCI
Formula: Proprietary
Revised: 6/28/94


SECTION 2 – HAZARDOUS INGREDIENTS

None specified. Regulated by the F.D.A.
HMIS RATING: 0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe
HAZARD RATING SCALE: Health: 0; Fire: 0; Reactivity: 0


SECTION 3 – PHYSICAL DATA

Boiling Point: N/A
Vapor Pressure (mm Hg): N/A
Vapor Density (Air = 1): N/A
Specific Gravity (H2O=1): N/A
Melting Point: N/A
Evaporation Rate (H20 = 1): N/A
Water Solubility: Soluble to 20% in water
Appearance, Color, Odor: Yellow powder, bitter, typical tetracycline odor.


SECTION 4 – FIRE AND EXPLOSION HAZARD DATA

Flash Point (Method Used): N/A
Flammable Limits: N/A
LEL/UEL: N/A
Extinguishing Media: Water, Foam, Carbon Dioxide
Special Fire Fighting Procedures: N/A
Unusual Fire and Explosion Hazards: Avoid dust in air concentration that could produce
autoignition.


SECTION 5 – HEALTH HAZARD INFORMATION

Routes of Entry: Skin, ingestion & inhalation.
Health Hazards (Acute & Chronic): With normal use, no unusual physical or health hazards have
been determined.
Carcinogenicity: None established.
Signs & Symptoms of Exposure: None specified.
Medical Conditions Generally Aggravated by Exposure: None specified.
Emergency First Aid Procedures: Exercise reasonable care to prevent misuse.


SECTION 6 – REACTIVITY INFORMATION

Stability: Tet Sol 10 is stable
Conditions to Avoid: None
Incompatibility (Materials to Avoid): Moisture, alkaline materials, and oxidizers.
Hazardous Decomposition Products: None specified.
Polymerization: Will not occur.
Conditions to Avoid: None.


SECTION 7 – SPILL OR LEAK PROCEDURES

Steps to be taken in Case Material is Spilled or Released: Sweep and pick up powder. Flood
small amounts with water into drain.
Waste Disposal Method: Contain and dispose of in accordance with all local, state and federal
regulations.


SECTION 8 – SPECIAL PROTECTION INFORMATION

Respiratory Protection: NIOSH approved dust mask
Ventilation: Local Exhaust: Yes; Mechanical (General): N/A; Special: N/A; Other: N/A
Skin Protection: None
Eye Protection: Glasses with side shields.
Other Clothing or Equipment: None.
Work/Hygienic Practices: None


SECTION 9 – SPECIAL PRECAUTIONS

Cautions To Be Taken In Handling and Storing: Avoid high heat and moisture. Keep container
tightly closed.
Other Precautions: None.


While the information and recommendations set forth herein are believed to be accurate as of the
date hereof, Durvet, Inc. makes no warranty with respect thereto and disclaims all liabilities from
reliance thereon.