Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

CT

VIEWS: 75 PAGES: 3

CT

More Info
									Coatings
TASK GROUP MEETING AGENDA January 23-26, 2006 Crowne Plaza Redondo Beach 300 N. Harbor Drive Redondo Beach, California 90277

The Coatings Task Group is conducting audits to demonstrate compliance to SAE AS7109 series of standards. These documents contain the Nadcap requirements for the following processes:
Thermal Spray Vapor Deposit Coating Evaulation Plating of Coated Parts Heat Treating of Coated Parts

Cementation Processes
Stripping

All meetings will begin with Opening Comments consisting of: Call to Order/Quorum Check, Introductions & Routing of the Attendance List MONDAY 8:00 AM Closed 1.0 Opening Comments TUESDAY 1.0 Opening Comments WEDNESDAY
Open

Open

THURSDAY 1.0 Opening Comments

FRIDAY The Coatings Task group will not be meeting this day

8:15 AM Closed 1.1 Expectations 1.2 Auditor Feedback 8:30 AM Closed 2.0 Closed Meeting Issues (to include audit review if necessary) 8:45 AM

Open

1.1 Expectations 1.3 Approval of April 2005 Minutes 1.4 Review Action Item List

Open

17.0 Objective Evidence Initiative (cont'd) - The AC7109, AC7109/5, and AC7109/7 will be reviewed with suggested objective evidence for compliance comments. Any improvements will be suggested and evaluated at this time.

9:00 AM

Open

9:15 AM

3.0 Task Group Tutorial - A tutorial will be given so that new members may understand the functions of the Task Group

Open

Nadcap Management Council Meeting (8:30AM-10:00AM) - Task Group Chairs and PRI Staff are required to attend, and all members are encouraged to attend this informative and important meeting

9:30 AM

Open

9:45 AM

10:00 AM

Open

4.0 NMC Metrics-J. Lewis will present Nadcap Management Council-Coatings Metrics to the Task Group. The metrics identify the health of the Task Group in terms of audit review, audit capacity, supplier merit and prime support. Actions will be Chart - J. targeting 5.0 Cycle Timedeveloped Lewis will how present the Cycle Time Chart. This chart identifies the number of rounds of responses and time required for closure 6.0 Auditor Feedback - Summary of Post Audit Questionnaires will be reviewed.

10:15 AM

Open

10:30 AM

Open

10:45 AM

11:00 AM

11:15 AM

Open

11:30 AM

11:45 AM

7.0 Supplier Training - The results of the survey will be discussed. If the results are favorable, training will be developed for future trainings. The goal of this meeting will be to identify topics to be discussed and assign responsibility for developing presentations. The goal of the training will be to 8.0 AMS2750D/AC7109/7 AC7109/7 will be reviewed to ensure that requirements meet the requirements of AMS2750D. A decision will also be made as to the applicability of AMS2750 for global suppliers
LUNCH

Open

1.0 Opening Comments

Open

Open

Open

11.0 Supplier Support Committee Report - D. Harmon will present a summary of the Supplier Support CommitteeMeeting Report - J. Doherty 12.0 NMC meeting. will present a summary of the Nadcap Management Council meeting. 13.0 Lapsed Certifications - Status of previous actions will be reviewed. Data for lapsed accreditations versus characteristics of suppliers will be reviewed.

12:00 PM

LUNCH

LUNCH

LUNCH

12:15 PM

12:30 PM

This agenda is subject to change. (Please see www.pri-network.org for additional information)

1

Coatings
TASK GROUP MEETING AGENDA January 23-26, 2006 Crowne Plaza Redondo Beach LUNCH 300 N. Harbor Drive Redondo Beach, California 90277

The Coatings Task Group is conducting audits to demonstrate compliance to SAE AS7109 series of standards. These documents contain the Nadcap requirements for the following processes:
Thermal Spray Vapor Deposit LUNCH Coating Evaulation Plating of Coated Parts LUNCH Heat Treating of Coated Parts LUNCH

Cementation Processes
Stripping

All meetings will begin with Opening Comments consisting of: Call to Order/Quorum Check, Introductions & Routing of the Attendance List MONDAY 12:45 PM TUESDAY WEDNESDAY THURSDAY FRIDAY The Coatings Task group will not be meeting this day

1:00 PM Closed 2.0 Closed Meeting Issues (to include audit review if necessary) 1:15 PM

Open

9.0 Baseline Checklist Comment Resolution - Comments from balloting of Revision B (Baseline) checklists and standards will be discussed and resolved.

Open

14.0 Pre-audit Letter to Audit Contact The letter to be supplied to audit contact identifying resources prior to audit will be reviewed and finalized. 15.0 Chemical Analysis of Diffusion Coatings - The status of the Materials Teting requirements for microanalysis of aluminide coatings will be discussed as well as any actions necessary by the Coatings Task group to incorporate and use the requirements. 16.0 Hardness/Microhardness Requirements Update - Materials Testing Task group is currently revising hardness and microhardness requirements. Any changes relevant to testing of coatings will be discussed. A plan Objective Evidence Initiative 17.0 to implement changes will be - The AC7109, AC7109/5, and AC7109/7 will be reviewed with suggested objective evidence for compliance comments. Any improvements will be suggested and evaluated at this time.

Open

1:30 PM

Open

17.0 Objective Evidence Initiative (cont'd) - The AC7109, AC7109/5, and AC7109/7 will be reviewed with suggested objective evidence for compliance comments. Any improvements will be suggested and evaluated at this time.

1:45 PM

2:00 PM

Open

2:15 PM

2:30 PM

Open

2:45 PM

3:00 PM

Open

3:15 PM

10.0 Accreditation of Stripping Suppliers - Controls for auditng and accrediting stripping suppliers will be reviewed. The necessity of controlling all methods of stripping or only selected ones will also be discussed and resolved.
Open

3:30 PM

3:45 PM

18.0 Review Expectations/New Business - Expectations expressed at the beginning of the meeting will be reviewed to ensure that they have or will be addressed. Any new business will also be addressed.

4:00 PM

4:15 PM

4:30 PM

ADJOURNMENT

ADJOURNMENT

Open

4:45 PM

Open

5:00 PM Closed Nadcap Planning and Ops Meeting (5:00PM-6:00PM) - Task Group Chairs and Staff Engineers are required to attend.

Open

Supplier Support Committee Meeting (5:00PM-7:30PM) - All suppliers are encouraged to attend.

ADJOURNMENT

19.0 Review Action Item List/Assign Responsibilities - Action Items identified during the meeting will be reviewed to ensure that an expected completion 20.0 Agenda for April 2006 Meeting Task Group will develop agenda for April 2006 meeting ADJOURNMENT

This agenda is subject to change. (Please see www.pri-network.org for additional information)

2

Coatings
TASK GROUP MEETING AGENDA January 23-26, 2006 Crowne Plaza Redondo Beach 300 N. Harbor Drive Redondo Beach, California 90277

The Coatings Task Group is conducting audits to demonstrate compliance to SAE AS7109 series of standards. These documents contain the Nadcap requirements for the following processes:
Thermal Spray Vapor Deposit Coating Evaulation Plating of Coated Parts Heat Treating of Coated Parts

Cementation Processes
Stripping

All meetings will begin with Opening Comments consisting of: Call to Order/Quorum Check, Introductions & Routing of the Attendance List MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY The Coatings Task group will not be meeting this day

This agenda is subject to change. (Please see www.pri-network.org for additional information)

3


								
To top