Docstoc

V01_E_InlineScorpion

Document Sample
V01_E_InlineScorpion Powered By Docstoc
					Inline Scorpion
       Turn Key, High Speed, Inline In-Circuit Test Solution
       for High Volume Production

       In-Circuit test system (MDA)

       Up to 1,024 test pins

       Single or double sided testing – single fixture

       Complete fixture change in less than one minute

       Cycle time 4 seconds plus test time

       Maximum board size 350 mm x 400 mm

       Extended fault detection

       Built-in network analyzer

       SMEMA compliant conveyor

       Automatic program generation and debugging

       Optional functional testing

       Full software compatibility to Flying Scorpion

       Small Footprint: 1050 mm L x 1050 mm W x 1660 mm H
Technical Description

The    Inline Scorpion is a fully automated          The Inline Scorpion is ideally suited for the
in-circuit (MDA) test system for high                modern flexible manufacturing line requi-
volume production with the added advan-              ring a fast product change over. Upper and
tage of a very fast change over time for             lower fixtures are a single unified fixture
different assemblies – less than one minute,         with coding for proper conveyor width and
including fixture change.                            automatic call up of the test program.



Technical Notes
 Test Handling System:
 •   System footprint                     1050 mm L x 1050 mm W x 1660 mm H
 •   Weight                               500 kg
 •   Transport height                     900 mm ± 70 mm
 •   Conveyor width                       50 mm to 430 mm
 •   Controller                           Siemens S7 PLC with control panel
 •   Height of components                 60 mm max. top; 15 mm max. bottom
 •   Board conveyor clearance             3 mm
 •   Maximum board size                   350 mm x 400 mm
 •   Fixturing                            Multi level; single or optional double sided
 •   Electrical requirements              400 VAC (3 phase), 16 A
 •   Compressed air                       5 to 6 bar


 Test Handling Options:
 •   Independent signal interface for upper fixture for double sided testing
 •   Automatic conveyor adjustment
 •   Increased space for bottom side components
 •   Extended SMEMA protocol support
 •   Remote diagnostics



 Test System Specifications:
 • Test pins                  64 to 1,024 in increments of 64
 • Stimulus                   Two 4 quadrant DC Stimuli from 10 mV to 10 V and
                              2.44 nA to 1 A; One 25 mV to 100 V @ 20 mA
 • Relay matrix               4-wire measurements using any test point combination
 • Guarding                   Guarding at each test point. Up to 1 A with
                              programmable current limit
 • Voltage                    100 V
 • Current                    1 A max. continuous; 0.5 A switched
 • Measurement                12-bit DC voltmeter. Range from 80 mV to 100 V,
                              resolution 19 µV; measurement programmable
                              from 2 µsec to 16 sec. in 2 µsec increments
 •   Resistance               1 mΩ to 360 MΩ
 •   Capacitance              10 pF to 10 F
 •   Inductance               10 µH to 10 H
 •   Voltage                  19 µV to 100 V


 Test System Options:
 • CScan                      Detects faults including: open leads on ICs including
                              BGAs; reverse electrolytic capacitors; connector pins and
                              decoupling capacitors
 • ChipScan                   Detects open leads on ICs including BGAs with heat sinks
 • BodeScan                   Built-in network analyzer for detecting missing or wrong
                              small value components in complex RF networks
 • Functional test            IEEE,VXI, LabView, MetLab, etc.

Data subject to alteration without notice!
IS 001

SCORPION TECHNOLOGIES FRANCE SARL • 19 AVENUE DES INDES • 91969 COURTABOEUF-CEDEX
TEL: +33 (0)1 64 86 25 25 • E-MAIL: SCORPION.FRANCE@SCORPION-TECH.COM
SCORPION TECHNOLOGIES ITALIA S.R.L. • VIA DEI GIOVI 19 • 20021 BARANZATE   DI   BOLLATE
TEL: +39 0238 201 186 • EMAIL: SCORPION@SCORPION-TECH.IT
SCORPION TECHNOLOGIES UK LTD. • 500 PAVILION DRIVE • NORTHAMPTON BUSINESS PARK. NORTHAMPTON,
NN4 7YJ • TEL: +44 (0) 1604 661000 • EMAIL: SCORPION@SCORPION-TECH.CO.UK
SCORPION TECHNOLOGIES AG • PAPENREYE 51• D-22453 HAMBURG
TEL: +49 (0)40 -55 787-0 • FAX: +49 (0)40 -55 787-555
E-MAIL:SCORPION@SCORPION-TECH.COM • WWW.SCORPION-TECH.COM

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:0
posted:5/10/2014
language:Unknown
pages:2