Test Notification Form SQE002 by xiuliliaofz

VIEWS: 5 PAGES: 2

									g      GE Oil&Gas
                                                            Form SQE002
                                         Appendix 2 rev. 1.0 ref: SOU-WI-040
                                   to be sent to mailbox: SQE002.ICC@ge.com al least 10 days before inspection date
(*) SQE002 Issued date:
                                                                   Item Information
(*) Purchase Order #
Release # (only in case of Blanket Order)
(*) Purchase Order Revision
(*)Purchase Order line #
(*) Quantity to be inspected
(*) Item code
(*) Item description
(*) Project #

(*) Shipment/Destination

                                                             Testing Data
                                     Note: one SQE002 shall be filled out for each Testing Category
(*) Testing category                                                                              Laboratory                Coating/Painting
                                                                        NDT
                                                                                                  Tests                     process assessment
Note: only one category can be selected
(*) Inspection Test Plan # (write NA if not available)
(*) Tests to be executed                                        NDT LIST                        Laboratory Tests
(according to ITP)                                              Ultrasonic Test                 Product chemical
                                                                                                                             Coating/Painting process
                                                                                                                             assessment
                                                                                                analysis
                                                                Visual Test
Note: choose tests according to the Testing Category                                            Micrographic Test
selected in the field above                                     Radiographic Test
                                                                film review                     Mechanical Properties:
                                                                                                tensile/yeld/elongation
                                                                Magnetic Particles
                                                                                                Mechanical Properties:
                                                                Hardness on part                impact test

                                                                Liquid Penetrant Test           Hardeness on
                                                                                                specimen
                                                                Painting Thickness
                                                                measurement


Additional Tests

(*) Test description and applicable documentation
(according to ITP)


(*) Inspection date
(not required in case of Laboratory Tests)
(*) Specimen Shipment Date
(only in case of Laboratory Tests)
(*) Specimen Serial Number
(only in case of Laboratory Tests)
                                                                     Supplier Data
(*) Supplier name
(*) Supplier code
(*) Supplier Contact
(*) Phone number
(*) e-mail address
(*) Inspection Site
(not required in case of Laboratory Tests only)
                                                       GE Supplier Quality Engineer data
(*) SQE name
                                                                              Notes



                                                                                                      General note: Fields marked with (*) are mandatory
g     GE Oil&Gas
                                                            Form SQE002
                                         Appendix 2 rev. 1.0 ref: SOU-WI-040
                                   to be sent to mailbox: SQE002.ICC@ge.com al least 10 days before inspection date

(*) SQE002 Issued date:                                      25/03/2013
                                                                   Item Information
(*) Purchase Order #                                         439825981
Release # (only in case of Blanket Order)                    NA
(*) Purchase Order Revision                                  0
(*)Purchase Order line #                                     1
(*) Quantity                                                 1
(*) Item code                                                SRR69087
(*) Item description                                         PISTON
(*) Project #                                                1003184
(*) Shipment/Destination                                     FIRENZE
                                                             Testing Data
(*) Testing category                 Note: one SQE002 shall be filled out for each Testing Category                          Coating/Painting
                                                                         NDT        Laboratory
                                                                                                  Tests                      process assessment           x
Note: only one category can be selected
(*) Inspection Test Plan # (write NA if not available)       NA
(*) Tests to be executed                                        NDT LIST                        Laboratory Tests
(according to ITP)                                               Ultrasonic Test                 Product chemical
                                                                                                                               Coating/Painting process
                                                                                                                               assessment                 x
                                                                                                 analysis
                                                                 Visual Test
Note: choose tests according to the Testing Category                                             Micrographic Test
selected in the field above                                      Radiographic Test
                                                                 film review                     Mechanical Properties:
                                                                                                 tensile/yeld/elongation
                                                                 Magnetic Particles
                                                                                                 Mechanical Properties:
                                                                 Hardeness on part               toughness

                                                                 Liquid Penetrant Test           Hardeness on
                                                                                                 specimen
                                                                 Painting Thickness
                                                                 measurement


Additional Tests
(*) Test description and applicable documentation            Coating/Painting process assessment ITNxxxxx REV xx
(according to ITP)
(*) Inspection date                                          05/04/2013
(not required in case of Laboratory Tests)
(*) Specimen Shipment Date
(only in case of Laboratory Tests)
(*) Specimen Serial Number
(only in case of Laboratory Tests)
                                                                      Supplier Data
(*) Supplier name                                            ABC srl
(*) Supplier code                                            025896
(*) Supplier Contact                                         Fxxxxxxxxx
(*) Phone number                                             055-64xxxxxx
(*) e-mail address                                           commerciale@xxxx-com

(*) Inspection Site                                          Via Roma 21 50145 Firenze
(not required in case of Laboratory Tests only)
                                                       GE Supplier Quality Engineer data
(*) SQE name                                                 Fxxxxxxxxx
                                                                            Notes


                                                                                                       General note: Fields marked with (*) are mandatory

								
To top