Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

Stego Wrap Class C Vapour Retarder - Stego Industries LLC

VIEWS: 21 PAGES: 12

									                                                                                Stego® Wrap Class C
                                                                                   Vapour Retarder
                                                                                           STEGO INDUSTRIES, LLC                             Vapour Retarders
                                                                                                                                             07 26 00, 03 30 00

1. Product Name                                               5. Installation                                                  accurate and reliable. However, since
Stego Wrap Class C                                            UNDER SLAB: Unroll Stego Wrap Class                              site conditions are not within its control,
Vapour Retarder                                               C over an aggregate, sand or tamped                              Stego Industries does not guarantee
                                                              earth base. Overlap all seams a mini-                            results from the use of the information
2. Manufacturer                                               mum of 150 mm (6 in) and tape using                              provided and disclaims all liability
Stego Industries, LLC                                         Stego Tape. All penetrations must be                             from any loss or damage. No warranty,
216 Avenida Fabricante, Suite 101                             sealed using a combination of Stego                              express or implied, is given as to the
San Clemente, CA 92672                                        Wrap Class C, Stego Tape and/or Stego                            merchantability, fitness for a particular
Sales, Technical Assistance                                   Mastic.                                                          purpose, or otherwise with respect to
Ph: (855) CA-STEGO                                                                                                             the products referred to.
Fx: (949) 257-4113                                            For additional information, please refer
www.stego.ca                                                  to Stego’s complete installation                                 8. Maintenance
                                                              instructions.                                                    None required.
3. Product Description
USES: Stego Wrap Class C is used as                           6. Availability & Cost                                           9. Technical Services
an exceptional vapour retarder.                               Stego Wrap Class C is available nation-                          Technical advice, custom CAD drawings,
COMPOSITION: Stego Wrap Class C is                            ally via building supply distributors. For                       and additional information can be
a multi-layer plastic extrusion manu-                         current cost information, contact your                           obtained by contacting Stego Industries’
factured with only high grade prime,                          local Stego Wrap distributor or Stego                            technical assistance department or via
virgin, polyolefin resins.                                    Industries’ sales department.                                    the website.
ENVIRONMENTAL FACTORS:
Stego Wrap Class C can be used in                             7. Warranty                                                      10. Filing Systems
systems for the control of soil gases                         Stego Industries, LLC believes to the                            • Stego Industries’ website
(radon, methane), soil poisons (oil                           best of its knowledge, that specifica-                           • Buildsite
by-products) and sulfates.                                    tions and recommendations herein are                             • 4Specs


 4.  Technical Data
 TABLE 1: PHYSICAL PROPERTIES OF STEGO WRAP CLASS C VAPOUR RETARDER
  PROPERTY                                TEST                                                                                                     METRIC            IMPERIAL
                                          ASTM E 1745 Class A, B & C – Standard Specification for Water Vapor Retarders Used
  Under Slab Vapour Retarders                                                                                                                      Exceeds Class A, B & C
                                          in Contact with Soil or Granular Fill under Concrete Slabs
                                                                                                               Permeance Units (perms):           ng/m2/s/Pa      gr/ft2/hr/in-Hg

                                          ASTM F 1249 – Test Method for Water Vapour Transmission Rate
  Water Vapour Permeance                                                                                                                             1.20             0.0209
                                          Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
                                          ASTM E 154 Section 8, F 1249 – Permeance after wetting, drying, and soaking                                1.29             0.0226
  Permeance After Conditioning            ASTM E 154 Section 11, F 1249 – Permeance after heat conditioning                                          1.27             0.0222
  (ASTM E 1745 Sections 7.1.2 - 7.1.5)    ASTM E 154 Section 12, F 1249 – Permeance after low temperature conditioning                               1.22             0.0214
                                          ASTM E 154 Section 13, F 1249 – Permeance after soil organism exposure                                     1.23             0.0214

                                          ASTM D 1709 – Test Methods for Impact Resistance of Plastic Film by Free-Falling
  Puncture Resistance                                                                                                                                       1,286 grams
                                          Dart Method
  Tensile Strength                        ASTM D 882 – Test Method for Tensile Properties of Thin Plastic Sheeting                                 8.6 kN/m         49.2 lbf/in
  Thickness                               ACI 302.1R-04 – Minimum Thickness (0.25 mm/10 mils)                                                      0.25 mm           10 mils
                                                                                                                    width x length:              4.3 m x 64 m      14 ft x 210 ft
  Roll Dimensions
                                                                                                                              area:                 273 m2           2,940 sf
  Roll Weight                                                                                                                                        63 kg           140 lbs

Note: Test results above are for Stego Wrap products made as of March 15, 2013. If you have product made prior to March 15, 2013, please refer to
Stego literature dated 09/12 for representative test results or call your local Stego Representative with questions.




Stego, the stegosaurus logo, Crete Claw, and StegoTack are all deemed to be protectable trademarks of Stego Industries, LLC.                                      04/2013
                                                                                                 Stego® Mastic
                                                                                         STEGO INDUSTRIES, LLC                          Vapour Retarders
                                                                                                                                        07 26 00, 03 30 00
1. Product Name                                                 Membrane for Use with Separate                             For additional information, please refer
Stego Mastic                                                    Wearing Course.                                            to Stego’s complete installation
2. Manufacturer                                               • ASTM E 1643 Standard Practice for                          instructions.
Stego Industries, LLC                                           Selection, Design, Installation, and
216 Avenida Fabricante, Suite 101                               Inspection of Water Vapor Retarders                        6. Availability & Cost
                                                                Used in Contact with Earth or                              Stego Mastic is available nationally via
San Clemente, CA 92672
                                                                Granular Fill Under Concrete Slabs.                        building supply distributors. For current
Sales, Technical Assistance
Ph: (855) CA-STEGO                                            5. Installation                                              cost information, contact your local
Fx:    (949) 257-4113                                         PREPARATION:                                                 Stego distributor or Stego Industries’
                                                              • A test application simulating the                          sales department.
www.stego.ca
                                                                project environment should always                          7. Warranty
3. Product Description                                          be done prior to final usage of Stego                      Stego Industries, LLC believes to the
USES: Stego Mastic is designed to be                            Mastic.                                                    best of its knowledge, that specifications
used as a waterproofing and vapour                            • All Surfaces should be dry and free                        and recommendations herein are
retardant membrane for use in                                   of loose materials, oils and other                         accurate and reliable. However, since
conjunction with Stego Wrap 10-mil                              contaminants. The surfaces should                          site conditions are not within its control,
and 15-mil Vapour Retarder/Barrier.                             be cleaned in the same fashion as                          Stego Industries does not guarantee
Stego Mastic can be used as an alternate                        the test surface in order to ensure                        results from the use of the information
to boots for pipe penetrations in Stego                         proper results.                                            provided and disclaims all liability from
Wrap Vapour Barrier.                                          • Store above 4°C                                            any loss or damage. No warranty,
COMPOSITION: Stego Mastic is a
                                                                                                                           express or implied, is given as to the
medium-viscosity,        water-based,                         PENETRATIONS:                                                merchan-tability, fitness for a particular
polymer-modified anionic bitumin-ous/                         For small pipe and rebar penetrations                        purpose, or otherwise with respect to
asphalt emulsion, which exhibits                              in Stego Wrap Vapour Barrier cut Stego                       the products referred to.
bonding, elongation and water-proofing                        Wrap just big enough for the penetration.
characteristics.                                              Liberally apply Stego Mastic around the                      8. Maintenance
SIZE: Stego Mastic comes in 19-litre                          penetration to keep the integrity of the                     None required.
(5-gal) buckets.                                              membrane intact. Stego Mastic can be                         9. Technical Services
4. Technical Data                                             applied by brush, roller, or sprayer.                        Technical advice, custom CAD drawings,
APPLICABLE STANDARDS:                                         NOTES: 1) For larger penetrations or                         and additional information can be
American Society for Testing and                              wide cut-outs of Stego Wrap, use Stego                       obtained by contacting Stego Industries’
Materials (ASTM)                                              Wrap and Stego Tape to repair and seal.                      technical assistance department or by
• ASTM D 412 Standard Test Method                             2) Solvent-based products should not                         visiting the website.
  for Vulcanized Rubber and Therm-                            be applied over this product. 3)Clean
  oplastic Elastomers - Tension                               all tools with kerosene and/or oil-based                     10. Filing Systems
• ASTM E 154 Standard Test Methods                            cleaners.                                                    • Stego Industries’ website
  for Water Vapor Retarders Used in                                                                                        • Buildsite
  Contact with Earth under Concrete
  Slabs, on Walls, or as Ground Cover
                                                              TABLE 1: PHYSICAL PROPERTIES OF STEGO MASTIC
• ASTM G 23 Practice for Operating
                                                              PROPERTY AND TEST RESULTS                                                    METRIC           IMPERIAL
  Light-Exposure Apparatus (Carbon-
  Arc Type) With and Without Water                            Tensile/Elongation, ASTM D 412                                               221 kPa           32 psi
  for Exposure of Nonmetallic                                 Resistance to Decay, ASTM E 154                                                   9% perm loss
  Materials (Withdrawn 2000)                                  Accelerated Aging, ASTM G 23                                                        No Effect
• ASTM E 96 Standard Test Methods                             Permeance, ASTM E 96 (perms)                                               9.7 ng/m2/s/Pa 0.17 gr/ft2/hr/in-Hg
  for Water Vapor Transmission of                             Hydrostatic Water Pressure, ASTM D 751                                       193 kPa           28 psi
  Materials                                                   Methane Transmission Rate, ASTM D 1434                                                    0
• ASTM D 751 Standard Test Methods
                                                              Adhesion to Concrete & Masonry, ASTM C 836                                  1.2 kN/m          7 lbf/in
  for Coated Fabrics
                                                              Hardness, ASTM C 836                                                                      85
• ASTM D 1434 Standard Test Method
  for Determining Gas Permeability                            Crack Bridging, ASTM C 836                                                          No Cracking
  Characteristics of Plastic Film and                         Low Temp Flexibility, ASTM C 836                                               No Cracking at -20°C
  Sheeting                                                    Resistance to Acids:     Acetic                                                          30%
• ASTM C 836 Standard Specification                                                    Sulfuric and Hydrochloric                                       15%
  for High Solids Content, Cold Liquid-                       Temperature Effect:      Stable                                               120°C            248°F
  Applied Elastomeric Water-proofing                                                   Flexible                                             -11°C             13°F

Stego, the stegosaurus logo, Crete Claw, and StegoTack are all deemed to be protectable trademarks of Stego Industries, LLC.                                    04/2013
                                                                                                      Stego® Tape
                                                                                         STEGO INDUSTRIES, LLC                            Vapour Retarders
                                                                                                                                          07 26 00, 03 30 00

1. Product Name                                               PIPE PENETRATION SEALING                                         6. Availability & Cost
Stego Tape                                                    1) Install Stego Wrap around pipe by                             Stego Tape is available nationally
                                                                 slitting/cutting material                                     via building supply distributors. For
2. Manufacturer                                               2) If void space around pipe is
Stego Industries, LLC                                            minimal, seal around base of pipe                             current cost information, contact
216 Avenida Fabricante, Suite 101                                with Stego Tape (Stego Mastic can                             your local Stego distributor or Stego
San Clemente, CA 92672                                           be used for additional coverage)                              Industries’ sales department.
Sales, Technical Assistance                                   DETAIL PATCH FOR PIPE PENETRATION                                7. Warranty
Ph: (855) CA-STEGO                                            SEALING
                                                                                                                               Stego Industries, LLC believes
Fx:    (949) 257-4113                                         1) Cut a piece of Stego Wrap that                                to the best of its knowledge, that
www.stego.ca                                                     creates a 150 mm (6 in) overlap
                                                                 around all edges of the void space                            specifications and recommend-ations
3. Product Description                                                                                                         herein are accurate and reliable.
                                                              2) Cut an “X” in the centre of the
USES: Stego Tape is a low permeance                              detail patch                                                  However, since site conditions are not
tape designed for protective sealing,                         3) Slide detail patch over pipe, secure                          within its control, Stego Industries
hanging, seaming, splicing, and                                  tightly                                                       does not guarantee results from
patching applications where a highly                          4) Tape down all sides of detail patch                           the use of the information provided
conformable material is required.                                with Stego Tape                                               and disclaims all liability from any
It has been engineered to bond                                5) Seal around base of pipe with                                 loss or damage.        No warranty,
specifically to Stego Wrap, making it                            Stego Tape (Stego Mastic can be                               express or implied, is given as to
ideal for sealing Stego Wrap seams                               used for additional coverage)                                 the merchantability, fitness for a
and penetrations.                                             Stego Tape should be installed above                             particular purpose, or otherwise with
COMPOSITION: Stego Tape is                                    4°C. In temperatures below 4°C take                              respect to the products referred to.
composed of polyethylene film and an                          extra care to remove moisture or                                 8. Maintenance
acrylic, pressure-sensitive adhesive.                         frost from the area of adhesion.                                 None required.
SIZE: Stego Tape is 10 cm (3.75 in)
                                                              For additional information, please
wide and 55 m (180 ft) long. Stego                                                                                             9. Technical Services
                                                              refer to Stego’s complete installation
Tape ships 12 rolls in a case.                                                                                                 Technical advice, custom CAD
                                                              instructions.
4. Technical Data                                                                                                              drawings, and additional infor-
APPLICABLE STANDARDS:                                                                                                          mation can be obtained by contacting
Pressure Sensitive Tape Council                                                                                                Stego     Industries’      technical
(PSTC)                                                                                                                         assistance department or by visiting
•	 PSTC 101 – International Standard                                                                                           the website.
   for Peel Adhesion of Pressure                                                                                               10. Filing Systems
   Sensitive Tape                                                                                                              •	Stego	Industries’	website
American Society for Testing &                                                                                                 •	Buildsite
Materials (ASTM)
•	 ASTM E 1643 - Standard Practice for
   Selection, Design, Installation, and                       TABLE 1: PHYSICAL PROPERTIES OF STEGO TAPE
   Inspection of Water Vapor Retarders
                                                              PROPERTY                                                               METRIC               IMPERIAL
   Used in Contact with Earth or
   Granular Fill Under Concrete Slabs                         Total Thickness                                                       0.15 mm                6 mils
5. Installation                                               Permeance (perms)                                                    1.7 ng/m2/s/Pa   0.03 gr/ft2/hr/in-Hg
SEAMS:
Overlap Stego Wrap 150 mm (6 in)                              Tensile Strength                                                       3 kN/m               17 lbs/in
and seal with Stego Tape. Make sure                           Elongation (at break) MD                                                          1060%
the area of adhesion is free from dust,
dirt and moisture to allow maximum                            Adhesion (20 min dwell ss, PSTC 101)                                   1 kN/m               95 oz/in
adhesion of the pressure sensitive                            Ultraviolet Resistance                                                          Excellent
tape.


Stego, the stegosaurus logo, Crete Claw, and StegoTack are all deemed to be protectable trademarks of Stego Industries, LLC.                                   04/2013
                                          STEGO® CRETE CLAW TAPE
Stego Crete Claw Tape provides an innovative and economical way to secure plastic                                              The unique design allows wet concrete
film to concrete while the concrete is still wet.                                                                              to cast into the textured surface of Crete Claw


Crete Claw is a multi-layered tape/detail strip that will mechanically lock Stego
Wrap Vapour Barrier to concrete. The unique design allows wet concrete to cast
into the textured surface of Crete Claw. Just stick Crete Claw to Stego Wrap prior
to concrete placement, then place the concrete directly over the system.

Stego Crete Claw can be used in place of Stego Tape to seal joints in Stego Wrap
Vapour Barrier providing a dual purpose and helping to offset costs.
                                                                                                                                          ANGLED TOP VIEW



                                                                                                                26-MILS
 MOST COMMON APPLICATIONS FOR CRETE CLAW                                                    150 mm 75 mm                                    Quick and easy
                                                                                                                                           SIDE VIEW AT 90°
                                                                                                                                            to install
 ASTM E 1643 - Forming seal to the slab at perimeter                                            ü               ü                           Saves time
 Securing Stego Wrap to bottom of slab for
 expansive/settling soils and carton/void
                                                                          Perimeter
                                                                                                ü                                           and money

 form applications                                                        Seams
                                                                                                ü                                           Innovative Solution to
                                                                                                                                            help meet ASTM E 1643

                                                                                         PERIMETER EDGE
  BELOW SLAB
                                                                                            Terminate just below the            Other more expensive products rely
                                                                                            exterior finished grade
                                                                      VAPOUR BARRIER                                            on chemical reaction or geotextile
           STEGO CRETE CLAW TAPE             VAPOUR BARRIER                                                                     to bond with concrete making it all
                                                                                         STEGO CRETE CLAW TAPE
                                                                                                                                but impossible to properly install the
                                                                                                                                vapour barrier. Often in pursuit of the
                                                                                                                                all-in-one product, the performance
                                                                                                                                characteristics of the vapour bar-
                                                                                                                                rier are compromised. Because Crete
                                                                                                                                Claw Tape is applied as a separate
                                                                                                                                accessory to the vapour barrier, it
                                                                                                                                does not interfere with the ability to
                                                                                                                                detail around penetrations or repair
                                                                                                                                damaged areas.
              SETTLING SOIL              USE CRETE CLAW TO
                                           SEAL JOINTS IN
                                            STEGO WRAP



 TABLE 1: CRETE CLAW TAPE TEST RESULTS

 PROPERTY                                         TEST                                                                                      RESULTS

 Total Thickness                                                                                                                            0.66 mm (26 mils)

 Permeance                                        ASTM F 1249                                                                               1.7 ng/s/m2/Pa (0.03 perms)

 180° Adhesion Peel Strength                      ASTM D 903                                                                                3.1 kN/m (17.6 lbf/in.)

 Sheer Adhesion Strength                          6.5 cm2 (1 in.2) shear test using an Instron 3345 Machine                                 >338 kPa (>49 lbf/in.2)*

                                                                                                                                            150 mm x 55 m (6” x 180’) and
 Roll Sizes
                                                                                                                                            75 mm x 55 m (3” x 180’) **
* Specimens failed by stretching vapor barrier to failure before pulling Crete Claw from concrete.
** 75 mm wide is for perimeter seal application only.

Contact us to learn more about this innovative product.
STEGO INDUSTRIES, LLC | 855-CA-STEGO | www.stego.ca
Stego, the stegosaurus logo, Crete Claw, and StegoTack are all deemed to be protectable trademarks of Stego Industries, LLC.
                                               STEGO® CRETE CLAW TAPE
                                               I N S TA L L AT I O N I N S T R U CT I O N S
                                               TOP-DOWN VIEWS OF A BUILDING FOOTPRINT

      INSTALL CRETE CLAW TAPE
      ON THE ENTIRE PERIMETER
      EDGE OF STEGO WRAP.                                                                        PERIMETER SEAL TO SLAB
      STEGO CRETE CLAW TAPE
                                                                                                 1. Clean surface of Stego Wrap to ensure that it is free of
                                                                                                    moisture and debris prior to the installation of
                                                                                                    Crete Claw Tape.

                                                                                                 2. Install 75 mm or 150 mm Crete Claw Tape on the entire
                                                                                                    perimeter of the Stego Wrap Installation. Crete Claw Tape
                                                                                                    should be completely on Stego Wrap.




                                                                                                          SEAL ALL PENETRATIONS WITH STEGO TAPE AND/OR STEGO MASTIC.
                                                                                                          CRETE CLAW TAPE IS NOT MEANT FOR REPAIRING PENETRATIONS.

                                                                                                                                            OR
                                                                                                                               STEGO TAPE                      STEGO MASTIC
                                                                                   VAPOUR BARRIER




            SEAL ALL SEAMS                                  INSTALL CRETE CLAW TAPE ON EDGE OF
            IN STEGO WRAP                                     STEGO WRAP WHERE STEGO WRAP
           USING STEGO TAPE                                       MEETS INTERIOR FOOTING
                                                                      OR GRADE BEAM

                                                                                               CRETE CLAW CAN BE USED TO SEAL SEAM AROUND
                                                                                               DETAIL PATCH FOR ADDED PROTECTION.

                                                                                           INSTALL CRETE CLAW TAPE
                                                                                           ON THE ENTIRE PERIMETER
                                                                                           EDGE OF STEGO WRAP.
                                                                                           STEGO CRETE CLAW TAPE

SECURING STEGO WRAP TO THE BOTTOM
OF THE SLAB
1. Clean surface of Stego Wrap to ensure that it is free of moisture
   and debris prior to the installation of 150 mm wide Crete Claw Tape.

2. Overlap seams a minimum of 150 mm (6”). Seal all seams in
   Stego Wrap using Crete Claw Tape.
3. Install 150 mm wide Crete Claw Tape on the entire perimeter of the
   Stego Wrap Installation.
4. Install additional Crete Claw Tape if required. Lab and Simulated
   field tests have shown that if 150 mm wide Crete Claw is installed on
   all seams and around the perimeter, then it is more than strong
   enough to support Stego Wrap. If determined by the architect or
   engineer, additional Crete Claw may be specified.
5. Prior to the placement of concrete, ensure that Crete Claw is free
   of dirt or debris to ensure maximum bond to the concrete.                                                                                                      VAPOUR BARRIER



These are general instructions. Installation requirements may change
on a project-by-project basis
                                                                                               SEAL ALL SEAMS                                 INSTALL 150 mm WIDE CRETE CLAW TAPE
IMPORTANT - For the application of securing Stego Wrap to the bottom                           IN STEGO WRAP                                ON EDGE OF STEGO WRAP WHERE STEGO WRAP
                                                                                             USING 150 mm WIDE                                       MEETS INTERIOR FOOTING
of the slab, always use 150 mm wide Crete Claw Tape                                           CRETE CLAW TAPE                                            OR GRADE BEAM




 NOTE: Stego Industries, LLC’s (“Stego”) installation instructions are based on ASTM E 1643 - Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor
 Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs. These instructions are meant to be used as a guide, and do not take into account specific job site
 situations. Consult local building codes and regulations along with the building owner or owner’s representative before proceeding. If you have any questions regarding the above
 mentioned installation instructions, Stego products, please call us at 855-CA-STEGO for technical assistance. While Stego employees and representatives may provide technical
 assistance regarding the utility of a specific installation practice or Stego product, they are not authorized to make final design decisions.

Stego, the stegosaurus logo, Crete Claw, and StegoTack are all deemed to be protectable trademarks of Stego Industries, LLC.
                                                                                                                      855-CA-STEGO • www.stego.ca                          04/2013
                                                                        Stego® Crete Claw Tape
                                                                                           STEGO INDUSTRIES, LLC                      Vapour Retarders
                                                                                                                                      07 26 00


1. Product Name                                                 5. Installation                                            6. Availability & Cost
Stego® Crete Claw Tape                                          SECURING STEGO WRAP TO SLAB:                               Stego Crete Claw is available
                                                                Clean the surface of Stego Wrap to                         nationally through our network of
2. Manufacturer                                                 ensure that it is free of moisture,                        building supply distributors. For
Stego Industries, LLC                                           frost, dirt, and debris prior to the                       current cost information, contact
216 Avenida Fabricante, Suite 101                               installation of Stego Crete Claw.                          your local Stego Wrap distributor
San Clemente, CA 92672                                          When ready to apply Crete Claw,                            or    Stego     Industries’  Sales
Sales, Technical Assistance                                     peel back the release liner and                            Representative.
Ph: (855) CA-STEGO                                              apply to Stego Wrap. Stego Crete
Fx: (949) 257-4113                                              Claw should be completely on Stego                         7. Warranty
www.stego.ca                                                    Wrap.                                                      Stego Industries, LLC believes
                                                                                                                           to the best of its knowledge, that
3. Product Description                                          Install Crete Claw Tape on all seams                       specifications and recommend-
USES: Stego Crete Claw Tape is                                  and around the entire perimeter of                         ations herein are accurate and
a multi-layered tape that is used                               the Stego Wrap installation.                               reliable. However, since site
to seal Stego Wrap to concrete                                                                                             conditions are not within its control,
                                                                To detail, cut Stego Crete Claw with
while the concrete is still wet.                                                                                           Stego Industries does not guarantee
                                                                a box knife or scissors. Crete Claw
Crete Claw allows wet concrete to                                                                                          results from the use of the
                                                                should be installed above 4°C for
cast into the textured top surface                                                                                         information provided and disclaims
                                                                maximum adhesion. For additional
to form a mechanical bond/seal.                                                                                            all liability from any loss or damage.
                                                                information, please refer to Stego’s
COMPOSITION: Stego Crete Claw                                                                                              No warranty, express or implied,
                                                                complete installation instructions.
is composed of polyethylene film,                                                                                          is given as to the merchantability,
aperture film, and an acrylic,                                  TIP: Wrap the release liner back                           fitness for a particular purpose,
pressure sensitive adhesive.                                    over the entire roll while unrolling                       or otherwise with respect to the
SIZE: Stego Crete Claw is 150 mm by                             Crete Claw. This technique will                            products referred to.
55 m. Stego Crete Claw ships 8 rolls                            allow the release liner to pull off
in a case.                                                      easily and keep it out of the way.                         8. Maintenance
                                                                                                                           Store Stego Crete Claw in a dry and
4. Technical Data                                                                                                          temperate area.

TABLE 1: PHYSICAL PROPERTIES OF STEGO CRETE CLAW                                                                           9. Technical Services
                                                                                                                           Technical advice, custom CAD
PROPERTY                                                                                             RESULTS
                                                                                                                           drawings, and additional information
Dimensions                                                                       150 mm x 55 m (6" x 180')                 can be obtained by contacting Stego
                                                                                                                           Industries’ technical department or
Total Thickness                                                                              0.66 mm (26 mils)             via our website.
Permeance: ASTM F 1249                                                        1.7 ng/s/m2/Pa (0.03 perms)
                                                                                                                           10. Filing Systems
180° Adhesion Peel Strength: ASTM D 903                                                3.1 kN/m (17.6 lbf/in.)             www.stego.ca
                                                                                                                           Buildsite
Sheer Adhesion Strength:
 6.5 cm2 (1 in2) shear test using an Instron 3345 Machine                             >338 kPa (>49 lbf/in2)*
* Specimens failed by stretching vapor barrier to failure before pulling Crete Claw from concrete.




Stego, the stegosaurus logo, Crete Claw, and StegoTack are all deemed to be protectable trademarks of Stego Industries, LLC.                             04/2013
                                                  Stego® Crete Claw (75 mm Wide)
                                                                                           STEGO INDUSTRIES, LLC                      Vapour Retarders
                                                                                                                                      07 26 00


1. Product Name                                                 5. Installation                                            distributors.    For current cost
Stego® Crete        Claw (75 mm Wide)                           UNDER SLAB: Clean surface of                               information, contact your local Stego
                                                                Stego Wrap to ensure that it is free                       Wrap distributor or Stego Industries’
2. Manufacturer                                                 of moisture, frost, dirt, and debris                       Sales Representative.
Stego Industries, LLC                                           prior to the installation of Stego
216 Avenida Fabricante, Suite 101                               Crete Claw. When ready to apply                            7. Warranty
San Clemente, CA 92672                                          Crete Claw, peel back the release                          Stego Industries, LLC believes
Sales, Technical Assistance                                     liner and apply to Stego Wrap. Stego                       to the best of its knowledge, that
Ph: (855) CA-STEGO                                              Crete Claw should be completely on                         specifications and recommend-
Fx: (949) 257-4113                                              Stego Wrap.                                                ations herein are accurate and
www.stego.ca                                                                                                               reliable. However, since site
                                                                To detail, cut Stego Crete Claw with                       conditions are not within its control,
3. Product Description                                          a box knife or scissors. Crete Claw                        Stego Industries does not guarantee
USES: Stego Crete Claw is a multi-                              should be installed above 4°C for                          results from the use of the
layered tape that is used to seal                               maximum adhesion. For additional                           information provided and disclaims
Stego Wrap to the perimeter of the                              information please refer to Stego's                        all liability from any loss or damage.
slab while the concrete is placed.                              complete installation instructions.                        No warranty, express or implied,
Crete Claw allows wet concrete to                                                                                          is given as to the merchantability,
cast into the textured top surface                              TIP: Wrap the release liner back                           fitness for a particular purpose,
to form a mechanical bond/seal.                                 over the entire roll while unrolling                       or otherwise with respect to the
COMPOSITION: Stego Crete Claw                                   Crete Claw. This technique will                            products referred to.
is composed of polyethylene film,                               allow the release liner to pull off
aperture film, and an acrylic,                                  easily and keep it out of the way.                         8. Maintenance
pressure sensitive adhesive.                                                                                               Store Stego Crete Claw in a dry and
SIZE: Stego Crete Claw (75 mm                                   6. Availability & Cost                                     temperate area.
Wide) is 75 mm wide 55 m long.                                  Stego Crete Claw (75 mm Wide)
Stego Crete Claw (75 mm Wide)                                   is available nationally through                            9. Technical Services
ships 16 rolls in a case.                                       our network of building supply                             Technical advice, custom CAD
                                                                                                                           drawings, and additional information
4. Technical Data                                                                                                          can be obtained by contacting Stego
                                                                                                                           Industries’ technical department or
TABLE 1: PHYSICAL PROPERTIES OF STEGO CRETE CLAW (75 mm Wide)                                                              via our website.
PROPERTY                                                                                             RESULTS
                                                                                                                           10. Filing Systems
Dimensions                                                                         75 mm x 55 m (3" x 180')                Buildsite
Total Thickness                                                                              0.66 mm (26 mils)
Permeance: ASTM F 1249                                                        1.7 ng/s/m2/Pa (0.03 perms)
180° Adhesion Peel Strength: ASTM D 903                                                3.1 kN/m (17.6 lbf/in.)
Sheer Adhesion Strength:
 6.5 cm2 (1 in2) shear test using an Instron 3345 Machine                             >338 kPa (>49 lbf/in2)*
* Specimens failed by stretching vapor barrier to failure before pulling Crete Claw from concrete.




Stego, the stegosaurus logo, Crete Claw, and StegoTack are all deemed to be protectable trademarks of Stego Industries, LLC.                             04/2013
                                                                                              StegoTack Tape
                                                                                           STEGO INDUSTRIES, LLC                         Vapour Retarders
                                                                                                                                         07 26 00, 03 30 00


1. Product Name                                               5. Installation                                              network of building supply distributors.
StegoTack Tape                                                TO CRAWLSPACE WALLS: Make sure                               For current cost information, contact
                                                              the area of adhesion is free of dust,                        your local Stego Wrap distributor or
2. Manufacturer                                               dirt, debris, moisture, and frost to allow                   Stego Industries’ sales representative.
Stego Industries, LLC                                         maximum adhesion. Remove release                             7. Warranty
216 Avenida Fabricante, Suite 101                             liner on one side and stick to desired                       Stego Industries, LLC believes to the
San Clemente, CA 92672                                        surface. When ready to apply Stego                           best of its knowledge, that specifications
Sales, Technical Assistance                                   Wrap, remove the exposed release liner                       and recommendations herein are
Ph: (855) CA-STEGO                                            and press Stego Wrap firmly against                          accurate and reliable. However, since
Fx: (949) 257-4113                                            StegoTack Tape to secure.                                    site conditions are not within its control,
www.stego.ca                                                                                                               Stego Industries does not guarantee
                                                              TO FOOTINGS: Make sure the area of
                                                              adhesion is free of dust, dirt, debris,                      results from the use of the information
3. Product Description                                        moisture, and frost to allow maximum                         provided and disclaims all liability
USES: StegoTack Tape is a double-                                                                                          from any loss or damage. No warranty,
                                                              adhesion. Remove release liner on one
sided adhesive strip used to bond                                                                                          express or implied, is given as to the
                                                              side and stick to desired surface. When
and seal Stego Wrap to concrete,                                                                                           merchantability, fitness for a particular
                                                              ready to apply Stego Wrap, remove the
masonry, wood, metal, and other                                                                                            purpose, or otherwise with respect to
                                                              exposed release liner and press Stego
surfaces.     StegoTack Tape is a                                                                                          the products referred to.
                                                              Wrap firmly against StegoTack Tape to
flexible and moldable material to
                                                              secure.                                                      8. Maintenance
allow for a variety of applications
and installations.                                            Cut StegoTack Tape using a utility knife                     For longer adhesive life, store in dry,
COMPOSITION:       StegoTack Tape                             or scissors. Cut StegoTack Tape before                       temperate area.
is made from a blend of synthetic                             removing the release liner for easier                        9. Technical Services
rubber and resins.                                            cutting. Install StegoTack Tape between                      Technical advice, custom CAD drawings,
SIZE: StegoTack Tape is 51 mm                                 4°C and 43°C.                                                and additional information can be
(2") wide and 15 m (15 ft) long.                              For additional information, please                           obtained by contacting Stego Industries’
StegoTack Tape ships 12 rolls in a                            refer to Stego’s complete installation                       technical assistance department or via
case.                                                         instructions.                                                the website. www.stego.ca
                                                              6. Availability & Cost                                       10. Filing Systems
                                                              StegoTack Tape is available through our                      www.stego.ca
                                                                                                                           Buildsite

 4.      Technical Data
 TABLE 1: PHYSICAL PROPERTIES OF STEGOTACK TAPE
 PROPERTY                                 RESULTS

 Dimensions                               15 m (50 ft) long,
                                          51 mm (2") wide
 Total Thickness                          0.76 mm (30 mils)
                                          1.7 ng/m2/s/Pa
 Permeance (at 0.76 mm/30 mils)           (0.03 gr/m2/hr/in-Hg)
 Color                                    Grey
 Material                                 Synthetic rubber blend
                                          1.8 kN/m (10.3 lbs./in.) width
 Adhesion to Steel                         ASTM C 1000
 Installation Temperature                 4°C/43°C (40°F/110°F)
 In Service Temperature Range              -29°C/60°C (-20°F/+140°F)
 VOC Content                              No VOC’s, 100% solids




Stego, the stegosaurus logo, Crete Claw, and StegoTack are all deemed to be protectable trademarks of Stego Industries, LLC.                                04/2013
                                                                                          Stego® Term Bar
                                                                                           STEGO INDUSTRIES, LLC                         Vapour Retarders
                                                                                                                                         07 26 00, 03 30 00


1. Product Name                                               lip is created for mastic/sealant to be                      and recommendations herein are
Stego Term Bar                                                used if required.Pre-drilled nail holes                      accurate and reliable. However, since
                                                              are provided every 150 mm for ease of                        site conditions are not within its control,
2. Manufacturer                                               installation.                                                Stego Industries does not guarantee
Stego Industries, LLC                                                                                                      results from the use of the information
                                                              To cut Stego Term Bar, score with a
216 Avenida Fabricante, Suite 101                                                                                          provided and disclaims all liability
                                                              utility knife or wire snips. Stego Term
San Clemente, CA 92672                                                                                                     from any loss or damage. No warranty,
                                                              Bar can be bent back and forth and then
Sales, Technical Assistance                                                                                                express or implied, is given as to the
                                                              broken at desired locations as well.
Ph: (855) CA-STEGO                                                                                                         merchantability, fitness for a particular
Fx: (949) 257-4113                                            Stego Term Bar is flexible enough to                         purpose, or otherwise with respect to
www.stego.ca                                                  bend around corners and contours in the                      the products referred to.
                                                              wall for easy installation.
3. Product Description                                                                                                     8. Maintenance
                                                              For additional information, please                           Store above 16°C (60°F). Term Bar
USES: Stego Term Bar is a semi-
                                                              refer to Stego’s complete installation                       will become less flexible at lower
flexible plastic termination bar used for
                                                              instructions.                                                temperatures.
mechanically securing Stego Wrap or
other materials to concrete, masonry,                         6. Availability & Cost                                       9. Technical Services
or wood.                                                      Stego Term Bar is available through our                      Technical advice, custom CAD drawings,
COMPOSITION: Stego Term Bar is made                           network of building supply distributors.                     and additional information can be
from post-industrial recycled PVC.                            For current cost information, contact                        obtained by contacting Stego Industries’
                                                              your local Stego Wrap distributor or                         technical assistance department or via
5. Installation                                               Stego Industries’ sales representative.
UNDER SLAB/CRAWLSPACE:                Nail                                                                                 the website. www.stego.ca
through Stego Term Bar and Stego Wrap                         7. Warranty                                                  10. Filing Systems
to secure material as needed. If the                          Stego Industries, LLC believes to the                        www.stego.ca
beveled edge is facing the wall, a pocket/                    best of its knowledge, that specifications



 4.      Technical Data
 TABLE 1: PHYSICAL PROPERTIES OF STEGO TERM BAR
 PROPERTY                                RESULTS

 Dimensions                              1.2 m (4 ft) long,
                                         28.6 mm (1 1/8") wide

 Color                                   Red

 Material                                Recycled PVC

 Weight                                  132 grams (4.7 oz)




Stego, the stegosaurus logo, Crete Claw, and StegoTack are all deemed to be protectable trademarks of Stego Industries, LLC.                                04/2013
        PART 1
         STEGO® WRAP VAPOUR BARRIER/RETARDER
         INSTALLATION INSTRUCTIONS
         IMPORTANT:         Please read these installation instructions completely, prior to beginning any Stego Wrap installation. The following
         installation instructions are based on ASTM E 1643 - Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor
         Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs. If project specifications call for compliance with ASTM E 1643,
         then be sure to review the specific installation sections outlined in the standard along with the techniques referenced in these instructions.

FIGURE 1: UNDER-SLAB INSTALLATION                                         UNDER-SLAB INSTRUCTIONS:
                                                                          1.     Stego Wrap can be installed over an aggregate, sand, or tamped earth
                                    STEGO TAPE                                   base. It is not necessary to have a cushion layer or sand base, as Stego
                                                                                 Wrap is tough enough to withstand rugged construction environments.
                                                                          2.     Unroll Stego Wrap over the area where the slab is to be placed. Stego
                                                                                 Wrap should completely cover the concrete placement area. All joints/
          Minimum 150 mm (6”) overlap                                            seams both lateral and butt should be overlapped a minimum of
                                                                                 150 mm (6”) and taped using Stego Tape.
                                                                          NOTE: The area of adhesion should be free from dust, dirt, moisture, and
                                                                          frost to allow maximum adhesion of the pressure-sensitive tape.

 VAPOUR BARRIER
                                                                          3.     ASTM E 1643 requires sealing the perimeter of the slab. Extend vapor
                                                                                 retarder over footings and seal to foundation wall, grade beam, or
                                                                                 slab at an elevation consistent with the top of the slab or terminate
                                                                                 at impediments such as waterstops or dowels. Consult the structural
                                                                                 engineer of record before proceeding.
FIGURE 2a: SEAL TO SLAB AT PERIMETER
                                                                                 SEAL TO SLAB AT PERIMETER:*
                                                                                 NOTE: Clean the surface of Stego Wrap to ensure that the area of adhesion is
                                                                                 free from dust, dirt, moisture, and frost to allow maximum adhesion of the
                                                                                 pressure-sensitive adhesive.
                                                                                 a.   Install Crete Claw on the entire perimeter edge of Stego Wrap.
                                                                                 b.   Prior to the placement of concrete, ensure that the top of Crete Claw
                                                                                      is free of dirt, debris, or mud to maximize the bond to the concrete.
 SLAB PERIMETER
                                                         STEGO LABOUR SAVER!
              CRETE CLAW
                                                         This method not only complies with ASTM E 1643, but it also:
                                                         • reduces labour compared to other perimeter sealing techniques.
                                                         • can be used even without an existing wall or footing, unlike alternatives.
                        VAPOUR BARRIER



FIGURE 2b: SEAL TO PERIMETER WALL                     FIGURE 2c: SEAL TO FOOTING                 OR SEAL TO PERIMETER WALL OR FOOTING WITH
             STEGOTACK TAPE                                                                      STEGOTACK TAPE:*
                                                                                                 a. Make sure area of adhesion is free of dust, dirt, debris,
                                                                                                    moisture, and frost to allow maximum adhesion.
                                                                                                 b. Remove release liner on one side and stick to desired
                                                                                                    surface.
                                                                                                 c. When ready to apply Stego Wrap, remove the exposed
                                                       FOOTING
                                                                                                    release liner and press Stego Wrap firmly against
                                                       STEGOTACK TAPE
                                                                                                    StegoTack Tape to secure.
 VAPOUR BARRIER
                                                                                                 * If ASTM E 1643 is specified, consult with project architect
                    FOOTING                      OR                 VAPOUR BARRIER               and structural engineer to determine which perimeter seal
                                                                                                 technique should be employed for the project.
      NOTE: Stego Industries, LLC’s (“Stego”) installation instructions are based on ASTM E 1643 - Standard Practice for Selection, Design, Installation, and
      Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs. These instructions are meant to be used as a
      guide, and do not take into account specific job site situations. Consult local building codes and regulations along with the building owner or owner’s
      representative before proceeding. If you have any questions regarding the above mentioned installation instructions or Stego products, please call us at
      855-CA-STEGO for technical assistance. While Stego employees and representatives may provide technical assistance regarding the utility of a specific
      installation practice or Stego product, they are not authorized to make final design decisions.
    Stego, the stegosaurus logo, Crete Claw, and StegoTack are all deemed to be protectable trademarks of Stego Industries, LLC.

                                                                                                                    855-CA-STEGO • www.stego.ca          04/2013
        4.    In the event that Stego Wrap is damaged during or after installation, repairs must be made. Stego Tape can be used
              to repair small holes in the material. For larger holes, cut a piece of Stego Wrap to a size and shape that covers any
              damage by a minimum overlap of 150 mm (6”) in all directions. Clean all adhesion areas of dust, dirt, moisture, and
              frost. Tape down all edges using Stego Tape (see figure 3, Sealing Damaged Areas).
FIGURE 3: SEALING DAMAGED AREAS

                                                                                                                STEGO TAPE                         STEGO TAPE



                                                                             STEGO TAPE




             DAMAGED AREA
                                                                                                                                   OR           SMALL HOLE




        5.    IMPORTANT: ALL PENETRATIONS MUST BE SEALED. All pipe, ducting, rebar, wire penetrations and block outs should
              be sealed using Stego Wrap, Stego Tape and/or Stego Mastic (see figure 4a, Pipe Penetration Sealing).

 FIGURE 4a: PIPE PENETRATION SEALING

                                                                    STEGO TAPE                                         STEGO MASTIC




               MINIMAL VOID SPACE CREATED
                                                                                               OR

              STEGO WRAP PIPE PENETRATION REPAIR DETAIL:
              1: Install Stego Wrap around pipe penetrations by slitting/cutting material as needed. Try to minimize the void space created.
              2: If Stego Wrap is close to pipe and void space is minimized then seal around pipe penetration with Stego Tape and/or Stego Mastic.
              (See Figure 4a)
              3: If detail patch is needed to minimize void space around penetration, then cut a detail patch to a size and shape that creates a 150 mm (6”)
                 overlap on all edges around the void space at the base of the pipe. Stego Pre-Cut Pipe Boots are also available to speed up the installation.
              4: Cut an “X” the size of the pipe diameter in the center of the pipe boot and slide tightly over pipe.
              5: Tape down all sides of the pipe boot with Stego Tape.
              6: Seal around the base of the pipe using Stego Tape and/or Stego Mastic.
              (See Figure 4b)

 FIGURE 4b: DETAIL PATCH FOR PIPE PENETRATION SEALING
                            CUT AN “X” THE SIZE OF
                            PIPE DIAMETER                                                                                          OR
                                                                                                                 STEGO TAPE                         STEGO MASTIC

                                STEGO
                                PRE-CUT
                                PIPE BOOT                                         STEGO TAPE




                                                                            STEGO                                          STEGO                             STEGO
               LARGE VOID SPACE CREATED                                     PRE-CUT                                        PRE-CUT                           PRE-CUT
                                                                            PIPE BOOT                                      PIPE BOOT                         PIPE BOOT

                             FIGURE 5: MULTIPLE PIPE PENETRATION SEALING

                                                     STEGO MASTIC
                                                     COMPLETELY FILL ALL VOIDS




                                                                                                MULTIPLE PIPE PENETRATION SEALING:
                                                                                 STEGO TAPE     Multiple pipe penetrations in close proximity and very
                                                                                                small pipes may be sealed using Stego Wrap and Stego
                                                                                                Mastic for ease of installation (see figure 5, Multiple
                                                                                                Pipe Penetration Sealing).


      NOTE: Stego Industries, LLC’s (“Stego”) installation instructions are based on ASTM E 1643 - Standard Practice for Selection, Design, Installation, and
      Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs. These instructions are meant to be used as a
      guide, and do not take into account specific job site situations. Consult local building codes and regulations along with the building owner or owner’s
      representative before proceeding. If you have any questions regarding the above mentioned installation instructions or Stego products, please call us at
      855-CA-STEGO for technical assistance. While Stego employees and representatives may provide technical assistance regarding the utility of a specific
      installation practice or Stego product, they are not authorized to make final design decisions.
    Stego, the stegosaurus logo, Crete Claw, and StegoTack are all deemed to be protectable trademarks of Stego Industries, LLC.

                                                                                                                    855-CA-STEGO • www.stego.ca               04/2013
    PART 2
    STEGO® WRAP VAPOUR BARRIER/RETARDER
    INSTALLATION INSTRUCTIONS
    CRAWL SPACE INSTALLATION INSTRUCTIONS:
    1.    Turn Stego Wrap up the foundation wall to a minimum height of 150 mm (6”) above the outside/exterior grade or in
          compliance with local building codes and terminate with Stego Term Bar. To form a complete seal, apply StegoTack
          Tape or a layer of Stego Mastic to the foundation wall prior to installing Stego Term Bar. Allow one hour for Stego
          Mastic to cure prior to installing Stego Term Bar.
    2.    Seal Stego Wrap around all penetrations and columns using Stego Tape, StegoTack Tape, and/or Stego Mastic.
    3.    Place Stego Wrap directly over the crawl space floor. If rigid insulation is to be used, install Stego Wrap prior to
          insulation (under insulation and between the foundation wall and insulation).
    4.    Overlap seams a minimum of 150 mm (6”) and seal with Stego Tape. Some codes require a minimum of a 300 mm
          (12”) overlap. Check appropriate codes prior to installation.
    4.
    FIGURE 6: CRAWL SPACE INSTALLATION

                                       STEGOTACK TAPE


                                                                                              STEGO TAPE




                                                                     VAPOUR BARRIER




                                           STEGO TERM BAR


                                       STEGO TAPE                                              STEGOTACK TAPE




                                                                                       SUBGRADE


    NOTE: Stego Wrap Vapour Barrier and Stego Tape are both available in white (as shown in illustration above).

    INSTALLATION TIP:
    1.    For a cleaner look and to prevent against tenting of Stego Wrap at the foundation wall/foundation floor intersection,
          consider mechanically fastening Stego Wrap to base of foundation wall in addition to the above mentioned wall
          termination.



 NOTE: Stego Industries, LLC’s (“Stego”) installation instructions are based on ASTM E 1643 - Standard Practice for Selection, Design, Installation, and
 Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs. These instructions are meant to be used as a
 guide, and do not take into account specific job site situations. Consult local building codes and regulations along with the building owner or owner’s
 representative before proceeding. If you have any questions regarding the above mentioned installation instructions or Stego products, please call us at
 855-CA-STEGO for technical assistance. While Stego employees and representatives may provide technical assistance regarding the utility of a specific
 installation practice or Stego product, they are not authorized to make final design decisions.
Stego, the stegosaurus logo, Crete Claw, and StegoTack are all deemed to be protectable trademarks of Stego Industries, LLC.

                                                                                                                855-CA-STEGO • www.stego.ca         04/2013

								
To top