Learning Center
Plans & pricing Sign in
Sign Out
Get this document free

Industrial Cooling Towers


To begin let's see what exactly is a cooling tower is used and how. In simple terms, cooling towers remove heat through evaporation.

More Info
									Cross Flow Cooling Tower

Industrial Cooling Towers
To begin let's see what exactly is a cooling tower is used and how. In simple terms, cooling towers
remove heat through evaporation. This allows a small amount of water being cooled is allowed to
evaporate in a stream of air that moves to allow a source of cooling water remaining stream.

With having many different types of applications, such as may be used for manufacturing, power
generation and air conditioning.

Different types of cooling towers

There are two different types of cooling towers: open and closed. Open, also known as direct cooling
towers, allow water to come in contact with the outside air. Return water is cooled, but due to a lot
more water will have evaporated should be introduced to replace what is lost. This tower will also
launch a filtration process to stop external contaminants entering the water.

counter flow cooling tower
Closed, also known as indirect cooling towers, do the opposite of open cooling towers. By not allowing
water to come into direct contact with anything outside the tower. With the addition of the heat
exchangers. The hot water to be cooled passes through the heat exchanger adjacent to the cooling
tower water required. This has its advantages to ensure that water remains pure of foreign substances.

Factors affecting the efficiency

Although reuse a lot of water throughout the process there are many different ways that water is lost. In
order to be considered effective it must minimize at all costs. So how water is lost? :

Evaporation: This is vital to the whole process works but is still considered a source of water loss, thus
estimating the evaporation rate is vital.

Overflow: This occurs when the water level in the cooling tower rises above the pre -set level. By
regularly checking water levels, will help reduce the amount of waste water.
Splash Out: Also known as wind effect, is caused when water is lost through splashing inside a tower.
This can be caused by wind and may require working toward a solution if much affecting the efficiency
of the tower.

Timber cooling tower
There are also many other ways you can lose water and reduce the efficiency of a tower, such as
leakage, which may not be visible.

It is also important to note that the cooling tower rental is also a very popular choice for many
organizations. Rent if necessary can help improve the efficiency and capacity in the short term,
especially if the faults are known to happen.

Crystal Cooling Towers manufacturer, exporters and suppliers of Cooling Tower and frp Cooling Tower.

To top