soccer nets.pptx by jackmiler2010


More Info
									soccer nets

The internal dimensions of the goals must be about 7.32 m
wide by 2.44 m height for soccer 11 and 5.50 m by 1.80 m for
soccer in 7. The width and the thickness of the amounts of the
goals and of the transverse bar must not be greater than 12
cm (they must have the same width). The amounts of the
goals must be white in color. The goals must not contain any
element that may snag or cut. It is advisable to use the goals
in galvanized steel which is very resistant to rust. The goals of
soccer must be fixed at any time and this, even outside of the
frameworks of a party. However,Soccer nets for the lands in
synthetic turf, one can use the goals with a system of
counterweights. When the mini-soccer field is housed on a
soccer field, it is preferable to do, not anchor the goals on a
permanent basis. These could become a dangerous obstacle
during the parties on the soccer field official. However, the
goals must have a sufficient stability in order not to endanger
the users.
                   The goals of soccer can be classified into six categories:

                   A) Permanent Goals: The vertical posts anchor in the

                   (B) Gel's semi-permanent: the vertical uprights are retained
                   in the ground by a system of bushings pressed into the

                   C) Goals semi-portable: The amounts before these goals
                   are permanent, but we can unhook the amounts back to the

                   D) Portable Goals: Usually aluminum, they are light and
                   easy to carry;

                   E) Goals demountable portable: They are very light and can
                   be dismantled for transport.

The anchorages must allow setting the goals permanently or for a specified period
even if there are constraints for the overthrow.

A) Type Anchor barrel

This anchoring allows you to set a goal at all times when it is taken in the concrete
base.Soccer nets The purpose may be removable with an anchor fitted with a rod or a
pipe that is inserted in a sleeve of a concrete base (ex.: figure 13). The opening of
the sleeve must be plugged when the purpose is removed to prevent the filling of the
cavity by debris.

B) Hooks

When you want to use a removable purpose, we can install the hooks at the bottom of
the aim in order to prevent the latter from tipping forward. These hooks are pushed
into the ground to a depth which can vary from 200 mm to 400 mm
                                   A) Type of nets

                                   A net of soccer must be made of nylon,
                                   twines bent or any equipment of the same
                                   kind. The nets in steel (kind closure) are to
                                   be avoided since they are very dangerous.
                                   The net bottom of the range is made of
                                   nylon thin enough whose nodes are small.
                                   The sustainability is limited and often after
                                   one or two seasons of use,Soccer nets the
                                   net will be drilled in a few places. The high-
                                   quality net is distinguished from the solid
                                   material and thick with large nodes more
                                   worked than the net bottom of the range.
B) Attached to the net

The nets can be installed permanently for
the season or be removable. There are two
systems of clips to make a removable mesh.
The first is to install small circular rings on
the rear face of the three amounts of front-
end goals and to install metal fasteners of
the kind that is found on the loops of hand
bag in the links extremes of nets. The
second is to use rolls of Velcro specially
designed for the nets. It is enough to carve
out of the pieces of Velcro on the same roll
and attach along the purpose in
surrounding the poles so spaced with the
pieces of Velcro.

To top