Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

215

VIEWS: 0 PAGES: 2

									CORRECTION FROM SOURCE: Upper Canada Gold Corporation Announces Assay Results from the
Dingman Property 2010 Drilling

TORONTO, ONTARIO--(Marketwire - July 6, 2010) - Please take note that there is a correction in the
Company's news release that was disseminated earlier today at 9:18am ET; the correction is in the
second paragraph and should read "eighth, ninth and tenth drill holes" as opposed to "second and third
drill holes". The following corrects and replaces the release.

Upper Canada Gold Corporation (the “Company”) (TSX VENTURE:UCC) announces selected drill hole
results from the drill program that commenced in early March 2010 on the Company’s 100% owned
Dingman Property.

The following assay results, corresponding to the eighth, ninth and tenth drill holes of a minimum twenty
hole drill program at the Dingman Property are as follows:

               Assay Results Received For Upper Canada Gold 2010 Drilling — Dingman Project

             DH-ID            Section        Dip        From       To     Length       Au
                                           (degree)      (m)       (m)      (m)       (g/t)
             DI-10-04A    L150W, 250N         -55         206.2     297.4     91.2       1.01
                              Including:                  206.2     214.2      8.0       1.48
                                                          216.2     228.0     11.8       0.66
                                                          236.5     242.0      5.5       2.12
                                                          247.0     258.4     11.4       1.33
                                                          262.0     272.4     10.4       0.96
                                                          274.0     279.5      5.5       0.97
                                                          281.5     297.4     15.9       1.59
             DI-10-04B    L150W, 250N         -48         189.4     285.5     96.1       0.96
                              Including:                  189.4     198.0      8.6       0.69
                                                          199.8     212.7     12.9       2.16
                                                          213.2     221.5      8.3       1.06
                                                          223.3     230.3      7.0       0.57
                                                          236.0     245.0      9.0       2.12
                                                          271.6     285.5     13.9       1.33
             DI-10-04C    L150W, 218N         -44         163.0     251.5     88.5       0.65
                              Including:                  163.0     168.0      5.0       0.83
                                                          178.5     180.0      1.5       0.97
                                                          191.5     195.2      3.7       0.85
                                                          198.0     201.4      3.4       1.65
                                                          203.5     208.6      5.1       1.14
                                                          214.0     224.0     10.0       0.52
                                                          227.0     233.5      6.5       2.90
                                                          240.5     243.3      2.8       1.03
                                                          245.5     251.5      6.0       0.78

The true widths of these mineralized zones are approximately 70% of the above Dingman drill intercept
widths.

The holes, corresponding to the above assays, were drilled on section below DI-07-14 and DI-07-06,
which was previously drilled by Opawica Explorations Inc. (″OPW″), to extend the continuity of the
mineralization below the OPW drill holes. The drill pattern was designed to have pierce points 25-30m
apart within the plane of the mineralization in order that the contained mineralization could be included in
future resource updates. The drill holes above indicate increasing average grade with depth (DI-10-04C to
DI-10-04A).

The drill program is focused on extending the mineralization beneath the current resource base from
approximately 200 m to 300 m below surface. As described further in the Company’s NI-43-101
compliant technical report on the Dingman Property dated September 15, 2009 and filed on SEDAR, the
indicated resource estimate for the Dingman Property includes a total of 8,801,000 tonnes at 0.97 g/t Au.
The inferred resource estimate is a total of 11,301,000 tonnes at 0.98 g/t Au. These resources are based
on a 0.40 g/t Au cut-off grade and a capping Au strategy of 30 g/t.

Approximately 6,700 m of drilling is planned under the current drill program of which approximately 5,502
m has been completed. Sample reporting was delayed for DI-10-04A and DI-10-04B (Section L150W,
250N) due to pending assay results DI-10-04C.

Assays results are also pending for seven additional drill holes (1,463 samples) while four additional drill
holes are being sampled.

Fire assaying for the Dingman property was completed by AGAT Laboratories of Mississauga, Ontario.

This release has been reviewed by Michael Leahey, [P.Geo.], who is a qualified person under National
Instrument 43-101 and is responsible for the drill program.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
release.


FOR FURTHER INFORMATION CONTACT:

Michael Churchill - President

Tel: 416-678-0928

Website: www.uppercanadagold.com

Cautionary Note Regarding Forward Looking Statements:

Some of the statements contained herein may be forward-looking statements which involve known and
unknown risks and uncertainties. Without limitation, statements regarding potential mineralization,
resources and expansion of resources, recoveries, exploration results, and future plans and objectives of
the Company are forward looking statements that involve various degrees of risk. The following are
important factors that could cause the Company’s actual results to differ materially from those expressed
or implied by such forward looking statements: changes in the world price of mineral commodities,
general market conditions, risks inherent in mineral exploration, risks associated with mine permitting,
metallurgy, development, construction and mining operations, the uncertainty of the determination of
mineable ounces of gold and copper in pounds or other minerals in pounds, or the future profitability of
the Company’s projects

								
To top