Environmental Hygienists Introduce Post Mold Remediation Clearance Inspection and Testing Anywhere in the USA

Document Sample
Environmental Hygienists Introduce Post Mold Remediation Clearance Inspection and Testing Anywhere in the USA Powered By Docstoc
					 Environmental Hygienists Introduce Post
Mold Remediation Clearance Inspection and
      Testing Anywhere in the USA
Environmental Hygienists Phillip and Divine Fry have expanded their post mold
remediation clearance inspection and testing services nationwide in the USA plus
Ontario Province to enable homeowners and commercial property owners to evaluate the
effectiveness of any mold removal company’s completed mold removal jobs.

Montrose, MI, October 26, 2013 -- Mold consultants and Environmental Hygienists
Phillip and Divine Fry have expanded EnviroFry’s independent post mold remediation
clearance inspection and testing service, which evaluates the mold removal job after any
company’s mold removal project in Michigan, Ohio, Indiana, Pennsylvania, Iowa,
Wisconsin, nationwide USA, and Ontario Province.

Many mold removal firms don’t discover and remove all of the toxic mold growth
locations often still present and remaining in the remediated homes and commercial
buildings because the companies:

1. Don’t utilize a fiber optics cable with video camera, or, alternatively, open up ceilings
and walls, to inspect inside ceiling, wall, and floor cavities for hidden mold growth. If a
residence or building has experienced roof leaks, siding leaks, plumbing leaks, or
flooding, there is likely to be widespread, hard-to-find mold infestation inside wide areas
of ceilings, walls, and floors.

2. Don’t do mold inspections carefully, thoroughly, and professionally inside attics, crawl
spaces, basements, and heating, ventilating, and air conditioning (HVAC) equipment and
ducts. HVAC systems are often mold factories that grow and distribute large numbers of
airborne mold spores throughout the entire building. Learn more about HVAC mold
problems at www.airconditionermold.com.

3. Use ineffective bleach that does not kill mold instead of effective EPA registered
fungicides such as safe-to-use, non-toxic, and low-cost TimBor. Read the TimBor
material safety data sheet (MSDS) at www.timborprofessional.com.

4. Use untrained and unsupervised workers to do mold cleanup and remediation services
that are best done professionally by Certified Environmental Hygienists and Certified
Mold Remediators such as the professional staff of EnviroFry. Read EnviroFry training
certifications, experience, and client testimonials at www.moldexpertconsultants.com.
Mold training is available at www.ecology-college.com.
5. Don’s use high-tech and effective mold remediation equipment and processes such as
high output ozone gas treatment, air scrubbing with both HEPA and activated carbon
filters, and the encapsulation of treated surfaces with antifungal products such as TimBor.
Read about ozone gas treatment of mold infestations at
www.ozonegeneratorkillsmold.com.

6. Don’t mold test the air of all rooms and areas, including the attic, basement, crawl
space, and the outward air flow from HVAC ducts.

For more information about EnviroFry’s post mold remediation clearance inspection and
testing service, phone Phillip Fry toll-free 1-866-300-1616 or Phillip’s cell phone 1-480-
310-7970, or email phil@moldinspector.com, or visit www.moldexpertconsultants.com.

Contact:
Phillip Fry
EnviroFry
10104 Sheridan Rd
Montrose, Michigan 48457
Toll-free 1-866-300-1616
Cell phone 1-480-310-7970
phil@moldinspector.com
http://www.moldexpertconsultants.com

				
DOCUMENT INFO
Description: Environmental Hygienists Phillip and Divine Fry have expanded their post mold remediation clearance inspection and testing services nationwide in the USA plus Ontario Province to enable homeowners and commercial property owners to evaluate the effectiveness of any mold removal company’s completed mold removal jobs.