Docstoc

Understanding Diamond Quality

Document Sample
Understanding Diamond Quality Powered By Docstoc
					Understanding Diamond Quality

                                    I recently got engaged to my girlfriend and have been writing a
                                    number of articles on purchasing engagement rings. When you go to
                                    purchase a ring you will most likely buy the setting and the stone
                                    separately. While there are many stones that you can have placed in
                                    your ring setting it is likely you will choose a diamond. To help you
                                    find the best value here is how to understand the quality of a diamond
                                    and what aspects are most important. Diamond quality is measured
                                    according to the 4Cs which are Color, Clarity, Cut, and Carat.



Color

White diamonds portray a lack of color (If you choose chocolate diamonds or something similar the
color scale will not apply). The ratings system runs on a scale from D all the way to Z (including all the
letters in between). There are a five categories of diamond color within this scale: Colorless (D,E, F),
Near Colorless (G, H, I, J), Faint Yellow (K,L, M), Very Light Yellow (N, O, P, Q, R) and Light yellow (S-Z).

If you are looking for a diamond beautiful to the naked eye (doubtful that your girlfriend will whip out a
loupe to inspect it) you should look for a diamond D-H. Colorless diamonds (D,E,F) are very high quality
but also come with a very large price tag. G and H graded diamonds contain so little color that is barely
noticeable to the naked eye. I and J graded diamonds have a slight amount of color that is noticeable to
the naked eye. Anything beyond J should probably be avoided as there will be noticeable color
especially in smaller diamonds.

Clarity

Diamond clarity grades the lack of inclusions or blemishes. Internal characteristics of the diamond are
inclusions while external characteristics are blemishes. The clarity rating is given based on the number,
size, nature, relief, and position of these inclusions or blemishes. While it is not necessary to understand
exactly how the diamond is graded it is important to understand what the grade signifies. None of these
characteristics are obvious to the naked eye but may affect diamond brilliance. Have the jeweler let you
see the diamond magnified to judge the size of possible inclusions or blemishes.

There are six grades or categories that a diamond may fall under. Flawless (FL) means there are no
inclusions or blemishes visible under 10x magnification (these diamonds can be very pricy). Internally
Flawless (IF) means that there are no inclusions visible under 10x magnification although there may be
blemishes. Very, Very Slightly Included (VVS1 and VVS2) means that there are inclusions so slight they are
difficult for a skilled grader to see under 10X magnification. Very Slight Included (VS1 and VS2) are
observed with effort under 10X magnification, but are minor. Slight Included (Sl1 and Sl2) have inclusions
are noticeable under 10x magnification. Finally, Included (I1, I2, I3) have inclusions obvious under 10x
magnification.

Cut

The cut of the stone is crucial to the stone’s
beauty and sparkle. While diamonds do come
in different shapes the cut refers to the
workmanship of cutting the diamond to allow
the diamond facets to interact with light.
Different jewelers may use their own grading
system to measure the quality of cut but there
are different proportions of a diamond’s cut.
While it is not necessary to go into every
portion of a diamond cut it is important to
understand the three effects the cut may have
on light. The cut will determine the proportions
of the diamond.

Diamonds that are too shallow (larger surface
area and shallow depth) will have light travel straight through the diamond without reflection. If the
diamond is conversely too deep the light will enter the diamond and then be refracted to the side out of
the bottom of the stone. The ideal diamond will reflect the light entering the stone back up to your eye.
Ideal diamonds have an equal mix of light and dark portions when looked straight down on the
diamond. Poorer diamonds will be either very dark or a bland light color.

Carat

The easiest to understand carat simply refers to the weight of the stone. Each carat can be subdivided
into 100 points. Each point matches up to the hundredth of the decimal. A diamond .35 carat diamond
is a thirty-five pointer. Not surprisingly larger diamonds are more rare and more valuable. A note to
make is that carat weights that are exactly the following (.5 carat, 1 carat, 1.5 carat, 2 carat, etc.) can be
very expensive. However, if you have carat weight that is slightly off one of these exact measurements
the diamond will be much cheaper. If you are worried more about the size of the stone you can search
for stones based on top surface area measured in millimeters, (but remember having a shallow or deep
diamond will affect the brilliance of the diamond).

The Price

I have listed no prices in each of the 4C’s because of variability. Your diamond price will change
depending on the grades you select for each of the 4 C’s. Determine what is most important to you and
make sacrifices accordingly. If you want a beautiful diamond you may end up choosing something small.
If size matters remember the diamond may not shine as you hoped. The diamond does represent a
large investment so look into insuring the diamond at the jeweler or including it as part of your home
insurance, good hunting!

Photo Pin: Fancy Diamonds, Fancy Diamonds

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:14
posted:10/26/2013
language:
pages:3
Description: I recently got engaged to my girlfriend and have been writing a number of articles on purchasing engagement rings. When you go to purchase a ring you will most likely buy the setting and the stone separately.