; 1297064pdf
Learning Center
Plans & pricing Sign in
Sign Out
Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>



  • pg 1
									- - - - - - - - - - - - - - - - MATERIAL SAFETY DATA SHEET - - - - - - - - - - - - - - Fiebing
IDENTITY (As Used on Label and List): Silicone Shoe-Kote, Aerosol ----------------------------------------------------------SECTION I ----------------------------------------------------------MANUFACTURER'S NAME: FIEBING COMPANY, INC. 516 SOUTH 2ND STREET MILWAUKEE, WI 53204-0125 EMERGENCY TELEPHONE NUMBER: (800) 424-9300 TELEPHONE NUMBER FOR INFORMATION: (414) 271-5011 DATE PREPARED: February, 1998 ----------------------------------------------------------SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION ----------------------------------------------------------Hazardous Components (Specific Chemical OSHA ACGIH % Identity: Common Name(s)) PEL TLV (optional) ----------------------------------------------------------Butane N.E. 800 ppm * (CAS No. 106-97-8) Other Limits Recommended: N/A Propane (CAS No. 74-98-6) 1000 ppm N.E. * Other Limits Recommended: N/A Mixture of C10-C13 N.E. N.E. * Isoparaffins (CAS No. 68551-17-7) Other Limits Recommended: 400 ppm Tetra (Octyl) Titanate N.E. N.E. * (CAS No. 1070-10-6) Other Limits Recommended: N/A Tetra Isopropyl Titanate N.E. N.E. * (CAS No. 546-68-9) Other Limits Recommended: N/A ----------------------------------------------------------SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS ----------------------------------------------------------BOILING POINT: Range -44 deg F to over 340 deg F VAPOR PRESSURE (mm Hg.): N.D. VAPOR DENSITY (AIR = 1) Approx.: 4.9 SPECIFIC GRAVITY (H2O = 1) Approx.: 0.80 MELTING POINT: N.D. EVAPORATION RATE (Butyl Acetate = 1): N.D. SOLUBILITY IN WATER: Negligible. APPEARANCE AND ODOR: Clear, colorless liquid under pressure; slight solvent odor. ----------------------------------------------------------SECTION IV - FIRE AND EXPLOSION HAZARD DATA ----------------------------------------------------------FLASH POINT (Method Used): Flammable, estimated to be less than -100 deg F FLAMMABLE LIMITS: Estimated LEL: 1.8 UEL: 9.5 EXTINGUISHING MEDIA: Foam, carbon dioxide, dry chemical. Use (NFPA) Class B extinguisher. SPECIAL FIRE FIGHTING PROCEDURES: Heat may cause containers to explode. Use water to cool containers. Fight fire from safe distance. Wear full protective equipment including NIOSH approved self-contained breathing apparatus. Avoid accumulation of flammable vapors at floor level, as vapor is heavier than air. UNUSUAL FIRE AND EXPLOSION HAZARDS: Pressure build-up due to heat exposure may cause containers to explode. Water may be used to cool containers, but water may spread fire as product floats on water.

----------------------------------------------------------SECTION V - REACTIVITY DATA ----------------------------------------------------------STABILITY: Stable CONDITIONS TO AVOID: Contact with flame, sparks or heat which can cause thermal decomposition. INCOMPATIBILITY (Materials to Avoid): Strong oxidizers. HAZARDOUS DECOMPOSITION OR BYPRODUCTS: Carbon monoxide and various organic compounds may be released if burned, also silicone dioxide oxides of nitrogen and titanium dioxide. HAZARDOUS POLYMERIZATION: Will Not Occur CONDITIONS TO AVOID: None known. ----------------------------------------------------------SECTION VI - HEALTH HAZARD DATA ----------------------------------------------------------ROUTE(S) OF ENTRY: INHALATION? Yes SKIN? No INGESTION? No HEALTH HAZARDS (Acute and Chronic): Effects of overexposure - dizziness, nausea, unconsciousness. Eye contact or prolonged skin contact will cause irritation. CARCINOGENICITY: NTP? No IARC MONOGRAPHS? No OSHA REGULATED? No SIGNS AND SYMPTOMS OF EXPOSURE: As noted above. MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: None known. EMERGENCY AND FIRST AID PROCEDURES: INHALATION: Remove victim to fresh air. Artificial respiration if needed. Get medical aid. SKIN CONTACT: Wash with soap and water. Remove soaked clothing to avoid prolonged skin contact. EYES: Flush with plenty of water for at least 15 minutes. INGESTION: Get immediate medical attention. Consult poison control treatment center. Treatment is dependent on condition of victim. ----------------------------------------------------------SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE ----------------------------------------------------------STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Eliminate all ignition sources. Provide adequate ventilation. Absorb with appropriate inert material. WASTE DISPOSAL METHOD: Dispose of in accordance with federal, state, county and local regulations. Do not puncture, incinerate or heat aerosol cans. PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store away from heat, fire sparks or flame. Product is flammable. Do not store where temperatures may exceed 120 deg F. When storing large quantities storage conditions should comply with OSHA'S 1910.106. OTHER PRECAUTIONS: Flammable product - do not use near heat, fire, sparks or flame. Avoid excessive breathing of vapor. Do not spray in direction of body. Keep away from children. Use only in accordance with product directions. ----------------------------------------------------------SECTION VIII - CONTROL MEASURES ----------------------------------------------------------RESPIRATORY PROTECTION (Specify Type): If TLV is exceeded wear NIOSH approved self-contained breathing apparatus or respirator. VENTILATION: LOCAL EXHAUST: As required to maintain MECHANICAL (General): Levels below 400 ppm. SPECIAL: None OTHER: None PROTECTIVE GLOVES: Solvent-resistant rubber type recommended. EYE PROTECTION: Safety goggles. OTHER PROTECTIVE CLOTHING OR EQUIPMENT: None WORK/HYGIENIC PRACTICES: Handle with due care. Avoid breathing vapors. Avoid ignition sources.

Page 1 of 2

- - - - - - - - - - - - - - - - MATERIAL SAFETY DATA SHEET - - - - - - - - - - - - - - Fiebing
----------------------------------------------------------N.D. = Not Determined N.E. = Not Established N/A = Not Applicable ----------------------------------------------------------DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIES: although preparer and owner have taken reasonable care in the preparation of this document, we extend no warranties and make no representation as to the accuracy or completeness of the information contained herein, and assume no responsibility regarding the suitability of this information for the user's intended purposes or for the consequences of its use. Each user should make a determination as to the suitability of the information for their particular purpose(s). A request has been made to the manufacturer to approve the contents of this material safety data sheet. Upon receipt of any changes a new MSDS will be made available. ----------------------------------------------------------COMPAS Code: 12970641


Page 2 of 2

To top