Organized by

Document Sample
Organized by Powered By Docstoc
					International Conference on Engineering Design and Optimization

                              (ICEDO 2010)

               28-30 October 2010, Ningbo, P. R. China

     Conference Program

                              Organized by
                 Ningbo University, Zhejiang Province, PRC
                     University of Wollongong, Australia
          Ningbo Institute of Technology of Zhejiang University, PRC

                                Hosted by
                 Ningbo University, Zhejiang Province, PRC
Organizing Committee
 Prof. Zhimin Feng, Ningbo University, PRC
Executive Chairman:
 Prof. Xuedao Shu, Ningbo University, PRC
 A/Prof. Weihua Li, University of Wollongong, Australia
 Prof. Di Zheng, Ningbo Institute of Technology of Zhejiang University, PRC
 A/Prof. Guoping Li, Ningbo University, PRC
 Prof. Yi-Min Deng, Ningbo University, PRC (Program Chairman)
 A/Prof. Haibo Huang, Ningbo University, PRC
 Prof. Guofu Li, Ningbo University, PRC
 A/Prof. Jun Liu, Ningbo University, PRC (Conference Affairs Director)
 A/Prof. Wen Feng Lu, National University of Singapore, Singapore
 A/Prof. Yongsheng Ma, University of Alberta, Canada
 A/Prof. Xiaobin Pan, Ningbo University, PRC
 A/Prof. Fa Shen, Ningbo University, PRC
 A/Prof. Baoshou Sun, Ningbo University, PRC
 A/Prof. Wei Xiang, Ningbo University, PRC
 Prof. Aibing Yu, Ningbo University, PRC (Program Co-Chairman)
 A/Prof. Junhe Yu, Ningbo University, PRC

  Miss Aifen Gan           Dr. Dongtai Liang          Dr. Zhiyong Ma
  Mr. Jiaqi Rong           A/Prof. Jianfei Tu         Mr. Wei Wang

International Advisory Committee
 Prof. Feifan Ye, Ningbo University, PRC
 Prof. Andrew Nee, National University of Singapore, Singapore
 Prof. Gursel Alici, University of Wollongong, Australia
 Prof. Graeme Britton, Singapore               Prof. Xu Han, PRC
 Prof. Zhiwu Han, PRC                          Prof. Qingxue Huang, PRC
 Prof. Wenhao Huang, PRC                       Prof. Xiaoxiong Jin, PRC
 Prof. Renwang Li, PRC                         Prof. Bin Lin, PRC
 Dr. Cheng Lu, Australia                       A/Prof. Yongsheng Ma, Canada
 Prof. Yan Peng, PRC                           Prof. Lianguan Shen, PRC
 A/Prof. Shu Beng Tor, Singapore               A/Prof. Jiwang Yan, Japan
 Prof. Yong Zang, PRC                          Prof. Haijun Zhang, PRC

Engineering design and optimization are important tasks and activities that are essential for the success of
product development and application. In general, they cover two aspects of research topics, including those
that are directly related to the design and optimization of the engineered products, and those that are related
to the design and optimization of the engineering processes; where the latter are essentially relevant to the
formation or implementation of the products, namely, the manufacturing processes. A more detailed list of
the relevant topics may be summarized as Engineering Design Theory and Methodology, Product Design and
Development, Simulation and Engineering Optimization, Manufacturing Systems Modeling and
Optimization, as well as Machining and Materials Processing Technology, and so forth.

To provide a forum for researchers and engineers, professionals and graduate students to exchange ideas and
showcase their latest research findings, this International Conference on Engineering Design and
Optimization 2010 (ICEDO 2010) has now been in reality. It is jointly organized by Ningbo University,
Zhejiang Province, China; University of Wollongong, Australia, and Ningbo Institute of Technology of
Zhejiang University, China. Since the first Call-For-Paper announcement from its organizing committee, this
great event has attracted many attentions. After a rigorous peer-review and revision process, we have
eventually compiled a two-volume conference proceedings consisting of as many as 349 papers!

This conference is a joint effort from all the contributors, including the authors, the reviewers, the conference
organizers, etc. The organizing committee would like to thank all the authors for their valuable contributions
and the reviewers for the constructive comments. Thanks are also due to the members of the International
Advisory Committee, and to the keynote speakers, in particular to those who have come all the way from
Canada, Australia, Singapore, etc. Special thanks are given to the conference program committee, to the
conference secretariat, as well as to a lot of other colleagues and students, for their hard work and much effort
in making the whole event a great success!

                                                                     The Organizing Committee
                                                                     Ningbo, PRC
                                                                     October 2010
Venue of Conference

Golden Port Hotel Ningbo, PRC 中国宁波金港大酒店
Golden Port Hotel Ningbo (Also known as Ningbo Jingang Hotel) is a Four Star hotel built
based on international standard under Everygreen Group. It is located in the central area of
Three-River-Junction Finance & Commerce area. The hotel sits along a scenic river. It is only
3.5 km from railway station, 15 km from airport and 8 km from general bus station.

Registration: at the Foyer 大会注册在酒店大堂(27日14:00-22:00及28日上午)

Plenary Sessions: at the Grand Meeting Room 大会场在酒店的6楼金色大厅(28日上午)

Sessions: at three Meeting Rooms on Floor 6, 7 & 8(28日下午及29日上午)

   Meeting Room 1: 分会场1在6楼的文萃阁

   Meeting Room 2: 分会场2在7楼的文涛阁

   Meeting Room 3: 分会场3在8楼的文略阁

Half Day Tour:Gather at the Foyer 奉化蒋氏故居游29日中餐后12:30在酒店大堂集中
Keynote Speakers

Keynote Speaker 1: A/Prof. Yongsheng Ma, University of Alberta, Canada

               Dr. Yongsheng Ma is a tenured associate professor of University of Alberta. He joined
Department of Mechanical Engineering since 2007. Before that Dr. Ma had been a professor with Nanyang
Technological University, Singapore since 2000. He has worked in the field of engineering IT as a lecturer,
trainer, IT consultant, R&D manager and a professor for the past 18 years. His main research areas include
engineering life-cycle management, feature-based product and process modeling. Dr. Ma owns BEng
(TsingHua, China 1986), MSc and PhD degrees (Manchester University, 1990 and 1994). He has registered
as a Professional Engineers of Alberta since 2009.

Organization: Mechanical Engineering Department, UOA
Telephone: 7804924443

Title: Engineering Design Interoperability and Productivity - A Challenge in
Engineering IT
Abstract: Engineering IT is a leading research field supporting concurrent engineering design productivity
and quality improvement towards key industrial technology upgrading. Nowadays, IT tools have been
applied in almost all the processes from conceptual design, to process analysis, manufacturing, project
management. The interoperability and system integration has been a challenge and demands a systematic
solution. Paradigm of traditional feature-based design and engineering has been shifted towards flexible,
associative, multi-facets, fine-grain, dynamic, and life-cycle-oriented advanced engineering informatics. The
new engineering IT approach is proposed in this presentation to implement IT projects in various engineering
projects with system integration and interoperability considered.
Problem: What are features? What is the concept of interoperability? What are the feature-based engineering
IT solutions? Associative features and their enormous applications in engineering IT are to be introduced.
Collaborative network engineering is emphasized.
Audience: Academics, Researchers, Plant technical managers, IT vendors, IT consultants, engineers using IT
tools, system integrators, system analysts, and developers
Keynote Speaker 2: Prof. Xu Han, Hunan University, PRC

Prof. Xu Han was born in June 1968, and received his PhD of mechanical engineering from National
University of Singapore. He is the Dean of the College of Mechanical and Vehicle Engineering. He is the
distinguished professor of Cheung Kong Scholars Program. His research focuses on computational reverse
technologies and engineering optimization. He has been |PI of many research projects, including the National
Defense 973 Research Program of China, the National Science Fund for Distinguished Young Scholars, the
National 973 Basic Research Sub-Program of China, etc. He has published one book in English and more
than 150 technique papers. As an invited or specially invited speaker, he has attended many important
academic meetings domestically and abroad. As the first winner, he has won various prizes such as the first
prize of the Science and Technology Advancement Award of Hunan Province, the GM innovation talents
award in the automotive field of Chinese colleges and universities, and the Science and Technology Award of
Hunan Province for Young Scientists.

Tel: 86-731-88823993; fax: 86-731-88821445. E-mails:,

Title: Techniques of structural optimization design for complicated equipments
Abstract: Systematic studies are conducted for the digitization modeling and optimization design
techniques of complicated equipments, and a series of computational models and solution algorithms are
developed at the aspects of nonlinear inverse problems, uncertain optimization and multiobjective
optimization. The relevant techniques have been successfully applied to multiple industrial departments such
as Mechanical engineering, Vehicle engineering and Aero-space, etc. An effective technique has been
proposed based on the inverse problem theories to realize the precise modeling for complicated equipments,
in which the problems from experimental measurement and numerical ill-posedness are well settled. The key
mechanical and structural parameters can be precisely identified, which thus can provide reliable inputs for
our simulation models and subsequent optimization design. In some practical applications such as the
vibration environment predication of aero-space structures, parameter identification in projectile-target
systems and advanced composite materials, the above digitalization modeling technique all plays an
important roll. We also develop an efficient multiobjective optimization technique for complicated
equipments, where the two important issues associated with the solution precision and large-scale
computation are a certain extent resolved. An optimal design considering multiple requirements and functions
can be obtained for complicated equipments within limited resources, and this technique has been applied to
the automobile body design for dynamic and static properties, crashworthiness design of commercial
vehicles, structural optimization of high-end grinding machines, etc. An uncertain structural optimization
technique is also developed for complicated equipments, in which we realize the uncertainty quantification in
an extremely complex system and additionally solve the low-efficiency problem caused by the nesting
optimization. Our technique can ensure a high reliability for equipments in some extreme cases, and it has
been applied to the design of automobile die, automobile crashworthiness analysis, analysis and design of
special defensive equipments, etc.
Keynote Speaker 3: A/Prof. Weihua Li, University of Wollongong, Australia

Dr Weihua Li received his B. E. and M. E. degrees from University of Science and Technology of China, and
Ph. D. degree from Nanyang Technological University Singapore. He was with the School of Mechanical and
Production Engineering of Nanyang Technological University as a research fellow from 2001 to 2003. He
has been with the School of Mechanical, Materials and Mechatronic Engineering as a Lecturer (2003-2005),
Senior Lecturer (2006-2009), and Associate Professor (2010 -).
Dr Li is internationally recognized for his work. He did pioneering work in systematically investigating
rheological and mechanical properties of magneto- rheological materials. He has been successfully securing
more than 22 research grants from a number of funding agencies, such as Australian Research Council,
Australian Academy of Science, University of Wollongong, etc. He has published more than 125 technical
articles in refereed international journals and conferences. Professor Li is currently an Associate Editor of the
journal of Smart Materials & Structures. He also sits on the Editorial Boards of the ‘Smart Materials
Research’, ‘Frontiers of Mechanical Engineering China’, and ‘Transactions of Nonlinear Science and
Complexity’. He serves as the reviewer of more than 30 journals and also chairs a number of conferences.


Title: Magnetorheology and Sensing Capability of Graphite based MR Elastomers
Abstract: MR elastomers are smart materials that their mechanical and electrical properties can be
controlled by external magnetic fields. Such materials have potential application in developing intelligent
devices. This research aims to develop a new MR elastomer with graphite as additives and characterize its
field dependence of magnetorheology and sensing capabilities. The research consists of five major tasks: (a)
fabrication of both isotropic and anisotropic graphite MR elastomers with different graphite weight fractions;
(b) characterization of the both steady and dynamic properties of such new MR elastomers; (c) observation of
their microstructures and study of the relationship between microstructures and mechanical properties; (d)
investigation of sensing capabilities via experimental and theoretical approaches; and (e) design and
development of a force sensor working with the new MR elastomers.
Keynote Speaker 4: Prof. Zhiwu Han, Jilin University, PRC

Dr. Han Zhiwu is a professor in School of Biological and Agricultural Engineering, Jilin University, and is a
Vice-Director of Key Laboratory of Bionic Engineering of Ministry of Education, P. R. China. He got the
Trans-Century Talents by Chinese Ministry of Education, China. He is General Secretary of Terrain-machine
System Brach of CSAM, a member of Materials and Manufacturing Technology Branch of CSAM, and a
Life Member of AAAE. He is engaging in Mechanical Engineering, and Engineering Bionics, and his major
research fields are Bionic Theory and Technology of Machine and Functional Surface.

He has engaged in 30 projects, and has published more than 100 papers in some famous journals, including
80 papers cited in SCI, EI, ISTP. He had been a visiting scholar in the University of Oxford for one year. He
also had been a visiting scholar in the University of Nottingham for three months.


Title: Functional Surface Biomimetics in Machinery System: Challenge and Application

Abstract: The phenomenon of damage and invalidation in component surfaces of machinery system
occurred widely, which led to its efficiency decreasing and economic loss increasing. Some traditional
methods were adopted to solve such problems, which made effect to some extent. Many investors and
researchers are engaging in looking for new methods to solve such problems.
The living creatures gave hints to us. Some animals have significant functional surface which made them
have good characteristics through evolution over millions of years. Such characteristics are anti-adhesion,
resistance reduction, anti-wear, anti-fatigue and so on. The functional surfaces of some animals with good
characteristics were chosen as examples to design component surface of machinery system, which changed
the performance of the components successfully.

In this talk, the mechanism of functional surface changing the performance of the components was discussed
carefully. The typical animal’s functional surfaces were investigated, and their morphology pictures were
illustrated. Some successful examples of bionic functional surface applied in machinery system obtained in
Jilin University were reviewed, and some experimental results were explained also.
Keynote Speaker 5: Prof. George Chiu, Purdue University, USA

George T.-C. Chiu is a Professor in the School of Mechanical Engineering and Electrical and Computer
Engineering (by courtesy) at the Purdue University. He received the B.S. degree in Mechanical Engineering
from the National Taiwan University in 1985 and the M.S. and Ph.D. degrees in Mechanical Engineering
from the University of California at Berkeley, in 1990 and 1994, respectively. Before joining Purdue in 1996,
he was an R&D engineer at the Hewlett-Packard Company. His current research interests are mechatronics
and dynamic systems and control with application to modeling and control of digital imaging and printing
systems, motion and vibration control and perception, human motor control and digital fabrication. Dr. Chiu
has authored and co-authored more than 140 journal and refereed conference papers. He received the 2010
IEEE Transactions on Control System Technology Outstanding Paper Award and the 2010 Purdue
Engineering Service and Engagement Excellence Award. He is also the co-inventor of 3 US patents with US
and Korean patent applications. Dr. Chiu is currently a member of the Executive Committee of the ASME
Dynamic Systems and Control Division and an associate editor for the Journal of Electronic Imaging and the
IFAC Journal of Control Engineering Practice. He also serve on the Board of Directors of the Shuttleworth,
Inc. Professor Chiu is a member of IEEE, ASME, and IS&T


Title: Maintain Color Consistency – Modeling and Control of a Two-Component
Xerographic Development Process

Abstract: Electrophotography, also known as xerography, is the marking process used in laser printers,
copiers and majority of the digital presses. It utilizes two electrostatic fields to transport micron sized charged
toner particles from toner supply to a photoconductive media to form a toner image and then to the output
media to form the printed image. The development process refers to the process of transporting toner
particles from the supply to the photoconductive media that has been exposed by a pulsed laser. It is one of
the most complex and important step in the xerography since the artifacts resulted from this step cannot be
removed and will likely be accentuated during the subsequent transport and fusing process. After a brief
introduction of the current market and technology analysis, we will first present the development of a bilinear
Weiner-type control-oriented model of the development process. The control-oriented model successfully
predicted/explained the performance degradation that was observed during operations. Given the limited
availability of actuators, process control has limited authority to compensate for the degradation of toner
particle developability, which results in service call and downtime. In the second part of the talk, we will
present the formulation and the numerical and analytical solution of a constrained optimization problem to
develop a process control strategy that will maximize the time between service call while maintain acceptable
image quality.

Wednesday, 27 Oct, 2010

14:00 - 22:00             Registration                                                           酒店大堂

17:00 – 20:00             Buffet Dinner Reception

Thursday, 28 Oct, 2010

8:00 - 12:00            Registration                                                             酒店大堂

                        Opening Ceremony
8:30 – 8:45             Welcome address: Prof. Zhimin Feng (Conference Chairman, Vice
                President of Ningbo University, PRC)

                        First Plenary Session
                        Session Chair: Prof. Yi-Min Deng (Conference Program Chairman)

                        Keynote No.1: Engineering Design Interoperability and Productivity - A
                Challenge in Engineering IT
8:45 – 10:00                                                                                     金色大厅
                        Speaker: A/Prof. Yongsheng Ma (University of Alberta, Canada)

                        Keynote No.2: Techniques of structural optimization design for
                complicated equipments
                        Speaker: Prof. Xu Han (Hunan University, PRC)

10:00 – 10:15           Photo Taking                                                             金色大厅

10:15 – 10:30           Coffee Break

                        Second Plenary Session
10:30 – 12:15                                                                                    金色大厅
                        Session Chair: Prof. Xuedao Shu (Conference Executive Chairman)
                        Keynote No.3: Magnetorheology and Sensing Capability of Graphite
                based MR Elastomers
                        Speaker: A/Prof. Weihua Li (University of Wollongong, Australia)

                        Keynote No.4: Functional Surface Biomimetics in Machinery System:
                Challenge and Application
                        Speaker: Prof. Zhiwu Han (Jilin University, PRC)

                        Keynote No.5: Maintain Color Consistency – Modeling and Control of a
                Two-Component Xerographic Development Process
                        Speaker: Prof. George Chiu (Purdue University, USA)

12:15 – 13:45           Lunch (complimentary)

                                            Short Break 午间短休


Session 1A              Design Methods I
14:00 – 16:00           Session Chairs: Prof Zixue Qiu, A/Prof. Weihua Li

The Matching Pursuit Method for Extracting Feature based on DT-CWT and Its Application

Zhixin Chen, Xuedao Shu, Chenglin Wang and Shikun Xie北京物资学院陈志新100

Study on Profile-adaptive Tool System for Small Robots in Large Freeform Surface Polishing

Qitong Liu, Jianming Zhan and Jianhua Mao詹建民627

Virtual Design for New Type Radial Telescopic Tire Building Drum

Yanbing Ni, Changcheng Li and Yuhu Yang天津大学倪雁冰666

The Mode and Structural Design of Venting System for Injection Mold

Honglin Li and Tingxiao Tang李红林771

A New Method for Accurately Evaluating Planar Straightness Error
Jiang Yuan, Zixue Qiu and Jinwei Cao南通大学邱自学755

Session 1B          Simulation and Optimization I
14:00 – 16:00       Session Chairs: Prof. Jibin Li, Prof. Yi Dai

Microstructure Design with Generalized Shape Optimization Based on Level Set Geometrical
Description and X-FEM

Kepeng Qiu and Weihong Zhang西北工业大学邱克鹏244

Topology Optimization on the Movable Platen of Plastic Injection Machine

Haibo Huang and Donghui Xue黄海波783

Optimization of Maximum Entropy Model Oriented to Bayes Prior Distribution Based on PSO

Yi Dai, Zhongmin Wang and Guang Ling天津职业技术师范大学戴怡238

Injection Molding Process Optimization of Multi-objective Based on MUD-RBFNN-GA

Baoshou Sun, Zhe Chen and Boqin Gu, Xiaodiao Huang孙宝寿480

The Research of Agile Manufacturing Based on Load Current of the Equipment

Guofu Li, Tengfei Fang and Liang Luo李国富786

Research on the Flow Characteristics of Polymer Injection Molding under Ultrasonic Vibration
and Plastics’ Mechanical Strength
Jibin Li, Keke Xu, Xinbo Lin, Xiaoyu Wu and Guoli


Session 1C          Manufacturing Process and Technologies I
14:00 – 16:00       Session Chairs: Prof. Fuqiang Ying, Prof. Xuedao Shu
The Stress and Strain Analysis in the Broadening Stage of Multi-wedge Synchrostep Rolling
Railway Axle by Cross-wedge Rolling

Xuedao Shu, Min Xiao, Chuanmin Li and Zhenghuan Hu束学道740

Analysis of Heating Performances for Ultra-High Speed Electric Spindle Bearings Based on the
Energy Theory of TEHL in Point Contact State
Songsheng Li, Zhihong Hu, Peng Zhou, Peng Chen, Xiaoyang Chen, Jiaming GU and Lixia FU


Ni-doping Alumina Foams for Fabricating MMCs by Pressureless Infiltration Using Fe Alloy
Shaofeng Yang, Weiping Chen, Mengyan Han and Dezhi


The Application of Slice Method in Cutting Simulation

Qing Li, Lin Li, Jingcai Li and Yu Guo天津大学李清639

Computer Numerical Controlled Coil Winding of the Electric Welding Machine

Yiqiang Wang, Xiaojun Wang and Shunming Hua浙江大学宁波理工学院王义强391

A Squeeze Casting Die Temperature Control System Based on Fuzzy Control

Fuqiang Ying and Taomei Guo浙江工业大学应富强319

16:00 – 16:20       Coffee Break茶歇

Session 2A          Design Methods II
16:20 – 18:20       Session Chairs: Prof Sizhu Zhou, A/Prof. Yongsheng Ma

Analytical Robust Design of a Gear Milling Machine Headstock

Yongliang Chen, Shuang Liu, Hantao Wang and Peihua Gu天津大学陈永亮389
Experimental Study on Performance Characteristics of Magnetorheological Damper

Zhenning Hou, Zhimin Feng, Haigang Hu and Guangbin Wu宁波大学海运学院侯振宁423

Influence Factor Analysis for Tension Control Based on MRF Damper

Liyong Hu, Di Zheng, Yongjie Shi and Yi-Min Deng胡利永768

A Web-based Collaborative Evaluation Platform for Mechanical Conceptual Design

Meiyan Wang, Lianguan Shen and Yi-Min Deng 王美焰363

Behavioral Characteristics of Electromechanical Products and Their Representation Based on a
Modified Petri Net

Huabo He and Ke Wang贺华波715

CAD System of the Cold Extrusion Die Based on VB

Sizhu Zhou, Xinmei Yuan and Jie Fan长江大学周思柱386

Session 2B          Simulation and Optimization II
16:20 – 18:20       Session Chairs: Prof. Yiqiang Wang, A/Prof. Wei Xiang

Parameter Optimization and Design of Radial Telescopic-Type Tire Building Drum

Weida Sun, Yanbing Ni and Yuhu Yang天津大学机械工程学院孙伟达444

Simulation Modeling of the Operating Room Based on SIMIO

Qian Zheng, Saifeng Chen, Jie Shen, Zeqing Liu, Kai Fang and Wei Xiang项薇732

Strategy for Developing Enterprise Cluster by Means of Establishing Regional Commercial

Li Liu柳丽733

Design and Optimization of the Suspension System on the Wheel-tracked Exploration Robot
Weiyan Shang and Faju Qiu宁波工程学院尚伟燕399

Research on the Regionally Clustered Manufacturing Mode Based on Flexible Configuration of
Manufacturing Resources

Jiaqi Rong and Lei Chen戎嘉琪760

Reliability Analysis and Improvement of ATCs of CNC Lathes

Yiqiang Wang, Xiaojun Wang and Shunming Hua浙江大学宁波理工学院王义强581

Session 2C          Manufacturing Process and Technologies II
16:20 – 18:20       Session Chairs: Prof. Shiquan Zhou, A/Prof. Jun Liu

Performance Analysis and Parameter Optimization of a Planetary Mixer

Mingjin Yang, Xiwen Li, Tielin Shi and Shuzi Yang西南大学工程技术学院杨明金441

Study on the Wear Properties of Hydrodynamic Oil Film Bearing by Finite Element Method
Yugui Li, Lin Zhu, Jianmei Wang, Hailian Gui, Duo Yan and Qingxue


Study on CNC System of Parallel Mechanism
Xueyong Zhong, Yanbing Ni, Panfeng Wang and Zhiyong


Optimization Design of Powder Molding Pressing Frame Based on Precision Effect

Jun Liu, Xinlong Dong and Gangyi Zhou刘军338

Mechanism of Zn Vapour Suppressed by Al in Laser Lap Welding of High Strength Zinc
Coated Sheet Steel

Shiquan Zhou and Zhenguo Peng华中科技大学工业中心周世权534
18:30 – 20:30       Welcome Banquet hosted by Ningbo University (Complimentary)

Friday, 29 Oct, 2010


Session 3A          Design Methods III
8:00 – 9:45         Session Chair: Prof. Dong Zhao, Prof. Hanwu He

Total-Probability Method in Reliability Design of Gear Strength

Yan Li, Wei Xiao, Haiyang Huang and Yingcai Yuan北京印刷学院李艳268

The Current Density and Energy Input in Electrothermal Explosion of Metallic Powders

Gangyi Zhou, Xinlong Dong and Jun Liu 周刚毅754

Calculation Method for the Theoretical Displacement of Cycloidal Pump

Yangfang Wu, Chunlin Xia and Yonggang Shi浙江大学城市学院吴央芳259

Design of 2-DOF Micro-positional Stage Based on Parallel Structure Using Flexible Plate

Hua Chun, Yuguo Cui, Yong Li and Lei Qiu崔玉国759

Computer Vision-based Augmented Reality System for Assembly Interaction

Hanwu He, Yueming Wu, Detao Zheng and Yong Rao广东工业大学何汉武214

Virtual Instrument for Measuring Elastic Modulus of Wood Floor

Dong Zhao, Jianzhong Zhang and Jian Zhao北京林业大学工学院赵东225

Session 3B
                    Simulation and Optimization III                                7楼文涛阁
8:00 – 9:45         Session Chairs: A/Prof Ligang Qu, Prof. Yanhai Hu

Optimization Design of the Secondary Calibration of Line Structured Light Vision System

Ka Zhang, Xiaosheng Cheng, Ning Dai and Haihua Cui南京航空航天大学张卡304

Enterprise Cluster Entity Modeling Based on Product

Li Sun, Junhe Yu, Hongfei Zhan and Yi Xu余军合777

Research on Building Method of Knowledge Resource Cooperation Complex Network for
Regional Manufacturing

Hongfei Zhan战洪飞770

Optimization of Collaborative Scheduling in Supply Chain

Zizhao Zheng and Yanhai Hu胡燕海467

Dynamic Simulation Analysis on Flexible Assembling Fixture for Aircraft Panel Component

Ligang Qu, Keqiang Pan and Xin Chen沈阳航空航天大学屈力刚228

Session 3C          Manufacturing Process and Technologies III
8:00 – 9:45         Session Chairs: Prof. Lianqing Chen, Prof. Aibing Yu

Study on YAG Laser Welding Process of Fe-Mn-Si Shape Memory Alloy

Chaoyu Zhou, Chengxin Lin and Linlin Liu大连海事大学周超玉630

Research on Swirl-Core Nozzle with Adjustable Spray Angle Based on Vortex Theory
Anhong Bao, Mingjin Yang, Xing Dai, Zhenyu Qiu and Shouyong

Effect of Wheel Elasticity on Grinding Stability

Aibing Yu, Liang Dong and Yanlin Wang于爱兵778

Experimental Study on High Alloy Antifriction Cast Iron in High-speed Cutting

Lianjie Ma and Zhentang Zhou东北大学秦皇岛分校马廉洁458

Microstructure and Interface Strength of MMCs Prepared by Pressureless Ni-induced
Infiltration Using Fe Alloy
Shaofeng Yang, Weiping Chen, Mengyan Han and Dezhi


Research on Inner Circle of Micro Plastic Gear Based on Sub-pixel Location

Lianqing Chen, Kun Wang and Liguo Gao宁波工程学院陈廉清757

9:45 – 10:00         Coffee Break茶歇

Session 4A           Design Methods IV
10:00 – 11:30        Session Chairs: Prof. Xiumin Yang, A/Prof. Guoping Li

The Dynamic Performance Research of Fixture for Automobile Hydraulic Vibration Reliability

Yi-shan Zeng合肥工业大学机械与汽车工程学院曾亿山291

Design and Simulation of Electric Pallet Truck Hydraulic Anti-skid System

Guoping Li, Luwei Wang and Lisheng Shu李国平750

Design of Surface Roughness Measurement Bench Based on Stewart Platform

Xiaobin Pan, Yaming Tang and Xiaojun Zhou潘晓彬443

Research on the Measurement System of Large Dimension Workpieces Based on the
Technology of CCD and Laser

Xiumin Yang, Yan Wang,Weilun Zhao and Lei Zhang沈阳工程学院自控系杨秀敏322

Session 5A          Design Methods V
10:00 – 11:30       Session Chairs: A/Prof. Miaosen Gong, A/Prof. Fa Shen

An Attempt of Using the National Color Culture on Product design

Yuexi Zhou and Lili Yang周跃西370

Feasibility Study of Using the Chinese Traditional Five Elements Chromatology on the

Industrial Design沈法430

On Product Refinement Design and Prototype Test

Zhibin Xie and Lei Shi谢质斌256

The Approaches of Cultivating and Improving Design Students’ DQ

Gang Liu江南大学设计学院刘钢760

Design Intervention for Social Innovation: Two Service Design Workshops in Italy and China

Miaosen Gong, Linghao Zhang and Xian Zhang江南大学设计学院巩淼森

Session 6A          Design Methods VI
10:00 – 11:30       Session Chairs: Prof Bin Lin, Prof. Xinlong Dong

The Research on Control of the Electronic-Mechanical CVT

Zhang Lei, Guoning Li, Yan Liu and Naishi Cheng东北大学机械工程与自动化学院张镭318

Color Image Denoising Using Gaussian Multiscale Multivariate Image Analysis
Dongtai Liang梁冬泰785

Improved Sensing Block Method and Its Application in Measurement of Dynamic Load

Honglian Yuan, Xinlong Dong and Jie Yang董新龙523

Air-lubricated Pneumatic Workbench

Chuhan Wu, Shumin Wan and Bin Lin天津大学林彬366

11:30 – 12:30      Lunch (Complimentary)

Shared By:
yolanda tiffany yolanda tiffany