Docstoc

CURRICULUM VITAE Chemical and Biomolecular Engineering

Document Sample
CURRICULUM VITAE Chemical and Biomolecular Engineering Powered By Docstoc
					                                                1




Publications

Polymer Micro- and Nano-Engineering/Micro- and Nanofluidics/BioMEMS and NEMS
1. X. Cao, S. Lai and L.J. Lee, “Design of a Self-Regulated Drug Delivery Device”, Biomedical
Microdevices, 3(2), 109-118 (2001).

2. M.J. Madou, L.J. Lee, S. Daunert, K.W. Koelling, S. Lai, and C-H Shih, “Design and
Fabrication of CD-like Microfluidic Platforms for Diagnostics, Part I: Microfluidic Functions”,
Biomedical Microdevices, 3(3), 245-254 (2001).

3. L.J. Lee, M.J. Madou, K.W. Koelling, S. Daunert, S. Lai, C.G. Koh, Y-J Juang, Y. Lu and L
Yu, “Design and Fabrication of CD-like Microfluidic Platforms for Diagnostics, Part II:
Polymer-Based Microfabrication”, Biomedical Microdevices, 3(4), 339-351 (2001).

4. M.J. Madou, Y. Lu, S. Lai, C.G. Koh, L.J. Lee and B.R. Wenner, "A Novel Design on a CD
Disc for 2-Point Calibration Measurement," Sensors and Actuators A, 91(3), 301-306 (2001).

5. Y-J Juang, L.J. Lee and K.W. Koelling, “Hot Embossing of Polymers for Microfabrication,
Part I. Experimental”, Polymer Engineering & Science, 42(3), 539-550 (2002).

6. Y-J Juang, L.J. Lee and K.W. Koelling, “Hot Embossing of Polymers for Microfabrication,
Part II. Rheological Characterization and Process Analysis”, Polymer Engineering & Science,
42(3), 551-566 (2002).

7. L. Yu, C.G. Koh, L.J. Lee, K.W. Koelling, and M.J. Madou “Experimental Investigation and
Numerical Simulation of Injection Molding with Micro-Features”, Polymer Engineering &
Science, 42(5), 871-888 (2002).

8. L.J. Lee, “BioMEMS and Micro-/Nano-Processing of Polymers- An Overview”, Journal of the
Chinese Institute of Chemical Engineers, 34(1), 25-46 (2003).

9. S. Lai, S. Wang, L.J. Lee, S.T. Yang and M.J. Madou, “Design of a CD-like Microfluidic
Platform for Enyzme-Linked Immunosobent Assay”, Analytical Chemistry, 76(7), 1832-1837
(2004).

10. S. Lai, X. Cao and L.J. Lee, “A Packaging Technique for Polymer Microfluidic Platforms”,
Analytical Chemistry, 76, 1175-1183 (2004).

11. Y. Yang, C. Zeng and L.J. Lee, “Three-Dimensional Assembly of Polymer Microstructures
at Low Temperatures”, Advanced Materials, 16(6), 560-564 (2004).

12. H. He, X. Cao and L.J. Lee, ”Design of a Hydrogel Based Intelligent System for Controlled
Drug Release”, Journal of Controlled Release, 95(3), 391-402 (2004).

13. L. Yu, L.J. Lee and K.W. Koelling, “Flow and Heat Transfer Simulation of Injection
Molding with Microstructures”, Polymer Engineering & Science, 44(10), 1866-1876 (2004).



                                                1
                                               2




14. Y. Yang, X. Hu, L.J. Lee and K.W. Koelling, “Investigation of Structure Evolution in
Polymer Blending Using Microfabricated Samples”, Polymer, 45(6), 1959-1969 (2004).

15. Y-J. Juang, S. Wang, X. Hu and L.J. Lee, “Dynamics of Single Polymers in a Stagnation
Flow Induced by Electrokinetics”, Physical Review Letters, 93, 268105 (2004). {selected for the
January 10, 2005 issue of Virtual Journal of Nanoscale Science & Technology, Volume 11, Issue
1.}{selected for the January 1, 2005 issue of Virtual Journal of Biological Physics Research,
Volume 9, Issue 1.}

16. Y. Yang, S. Basu, D.L. Tomasko, L.J. Lee and S.T. Yang, “Fabrication of Well-defined
PLGA Scaffolds Using Novel Microembossing and Carbon Dioxide Bonding”, Biomaterials,
26(15), 2585-2594 (2005).

17. K. Kang, K.W. Koelling and L.J. Lee, “High Shear Microfluidics and Its Application in
Rheological Measurement”, Experiments in Fluids, 38, 222-232 (2005).

18. S. Wang, C. Zeng, S. Lai, Y.J. Juang, Y. Yang and L.J. Lee, “Polymeric Nanonozzle Array
Fabricated by Sacrificial Template Imprinting”, Advanced Materials, 17, 1182-1186 (2005).

****19. C. Lu, Y-J. Juang, L.J. Lee, D. Grewell and A. Benatar, “Analysis of Laser/IR-Assisted
Micro-embossing”, Polymer Engineering & Science, 45(5), 661-668 (2005).

20. G. Xu, L. Yu, L.J. Lee and K.W. Koelling, “Experimental and Numerical Studies of Injection
Molding with Microfeatures”, Polymer Engineering & Science, 45, 866-875 (2005).

21. Y. Yang, L.J. Lee, and W. Lu, "Subcritical Carbon Dioxide Assisted Polymer
Nanofabrication at Low Temperatures", Journal of Vacuum Science and Technology B, 23(6),
3202 (2005) {selected for the December 19, 2005 issue of Virtual Journal of Nanoscale Science
& Technology}.

22. C. Zeng, S. Wang, and L.J. Lee, "Dynamic Assembly of Silica for Fabrication of Nanoscale
Polymer Channels", Materials Letters, 59, 3095-3098 (2005).

23. L. Li and L.J. Lee "Photopolymerization of HEMA/DEGDMA Hydrogels in Solution",
Polymer, 46(25), 11540-11547 (2005).

24. J. Guan, H. He, L.J. Lee and D.J. Hansford, “Self-Folding of Hydrogel Three Dimensional
Microstructures”, Journal of Physical Chemistry B: Condensed Matter, Materials Surfaces,
Interfaces, and Biophysics, 109(49), 23134-23137 (2005).

25. Y-J Juang, S. Wang, C. Lu and L.J. Lee, “Electrokinetic Interactions in Microscale Flow
Dynamics”, Applied Physical Letters, 87, 244105 (2005) {selected for the December 15, 2005
issue of Virtual Journal of Biological Physics Research, and the December 26, 2005 issue of
Virtual Journal of Nanoscale Science & Technology}.

26. J. Guan and L. J. Lee, “Generating Highly Ordered and Stretched DNA Arrays”, Proceedings
of National Academy of Science, 102(51), 18321-18325 (2005).


                                               2
                                                3




27. X. Hu, Z. Ding and L.J. Lee, “Simulation of 2D Transient Viscoelastic Flow Using the
CONFESSIT Approach”, Journal of Non-Newtonian Fluid Mechanics, 127, 107-122 (2005).

28. L.J. Lee, “Polymer Nanoengineering for Biomedical Applications", Annals of Biomedical
Engineering, (34)1, 75-88 (2006).

29. H. He, J. Guan, L.J. Lee and D.J. Hansford, "An Oral Delivery Device Based on Self-Folding
Hydrogels", Journal of Controlled Release, 110, 339-346 (2006).

30. H. He, L. Li and L. J. Lee, “Photopolymerization and Structure Formation of Methacrylic
Acid Based Hydrogels in Water/Ethanol Mixture”, Polymer, 47, 1612-1619 (2006).

31. K. Kang, L.J. Lee and K.W. Koelling, “Microdevice End Pressure Evaluations with Bagley
Correction", Microfluidics and Nanofluidics, 2(3), 223-235 (2006).

32. J. Guan, N. Ferrell, L.J. Lee and D.J. Hansford, “"Fabrication of Polymeric Microparticles
for Drug Delivery by Soft Lithography," Biomaterials, 27, 4034-4041 (2006).

33. X. Hu, S. Wang, Y-J Juang and L.J. Lee, “Five-cross Microfluidic Network Design Free of
Coupling between Electrophoretic Motion and Electro-osmotic Flow”, Applied Physical Letters,
89, 084101 (2006) {selected for the September 4, 2006 issue of Virtual Journal of Nanoscale
Science & Technology}.

34. Y. Bai, C. G. Koh, M. Boreman, Y-J Juang, I-C Tang, L.J. Lee, and S-T Yang, “Surface
Modification for Enhancing Antibody Binding on Polymer-Based Microfluidic Device for
Enzyme-Linked Immunosorbent Assay”, Langmuir; 22(22), 9458 – 9467 (2006).

35. H.C. Jung, W. Lu, S. Wang, L.J. Lee, and X. Hu, "Etching of Pyrex Glass Substrates by ICP-
RIE for Micro/Nanofluidic Devices", Journal of Vacuum Science & Technology B:
Microelectronics and Nanometer Structures, 24(6), 3162-3164 (2006).

36. D.F. Farson, H.W. Choi, C. Lu, and L.J. Lee, “Femtosecond laser bulk micromachining of
microfluid channels in poly(methyl methacrylate)”, Journal of Laser Applications, 18(3), 210-
215, (2006).

37. Y. Yang, Y. Xie, X. Kang, L.J. Lee and D.A. Kniss, “Assembly of 3D Cell-Scaffold
Constructs Using Carbon Dioxide”, Journal of American Chemistry Society, 128(43), 14040-
14041 (2006).

^38. Y. Yang, D. Liu, L.J. Lee, and D.L. Tomasko, “Low Temperature Fusion of Polymeric
Nanostructures Using Carbon Dioxide”, Advanced Materials, 19(2), 251-254 (2007).

39. Y. Yang, M-C Cheng, X. Hu, L.J. Lee, R. Goyette, and M. Ferrari, “CO2 Enhanced Polymer
Surface Dynamics below the Bulk Glass Transition Temperature”, Macromolecules, 40(4),
1108-1111 (2007).




                                                3
                                               4




40. X. Kang, Y. Xie, H.M. Powell, L.J. Lee, M.A. Belury, J.J. Lannutti and D.A. Kniss,
“Adipogenesis of Murine Embryonic Stem Cells in a Three-Dimensional Culture System Using
Electrospun Polymer Scaffolds”, Biomaterials, 28(3), 450-458 (2007).

41. S. Wang and L.J. Lee, “Electrokinetically Assisted Dynamic Assembly in Microfluidics”,
Journal of American Chemistry Society, 127(2), 254-255 (2007).

42. C. Lu, Y. Xie, M-C Cheng, Y. Yang, C-G Koh, L.J. Lee and Y-J Juang, “New Valving and
Bonding Methods for Microfluidic Biochips Containing Proteins”, Analytical Chemistry, 79(3),
994-1001 (2007).

43. T.B. Stachowiak, D.A. Mair, T. G. Holden, L.J. Lee, F. Svec and J.M.J. Fréchet, “Hydrophilic
Surface Modification of Cyclic Olefin Copolymer Microfluidic Chips Using Sequential
Photografting”, J. Separation Science, 30, 1088-1093 (2007).

44. J. Guan, B. Yu and L.J. Lee, “Forming Highly Ordered Arrays of Functionalized Polymer
Nanowires by Dewetting on Micropillars”, Advanced Materials, 19, 1212-1217 (2007).

45. C. Lu, M-C Cheng, A. Benatar and L.J. Lee, “Embossing of High-Aspect-Ratio-
Microstructures Using Sacrificial Templates and Fast Surface Heating”, Polymer Engineering &
Science, 47(6), 830-840 (2007).

46. J. Guan, H. He, L.J. Lee and D.J. Hansford, “Fabrication of Particulate Reservoir-Containing,
Capsule-Like, and Self-Foldable Polymer Microstructures for Drug Delivery”, Small, 3, 412-418
(2007).

47. N-R Chiou, C. Lu, J. Guan, L.J. Lee and A.J. Epstein, “Growth and Alignment of Polyaniline
Nanofibres with Superhydrophobic, Superhydrophilic and Other Properties”, Nature
Nanotechnology, 2, 354-357 (2007).

48. Z. Fei, S. Wang, Y. Xie, B. Henslee and L.J. Lee, “Transgene Delivery to Mammalia Cells
Using Membrane Sandwiched Electroporation’, Analytical Chemistry, 79(15), 5719-5722
(2007).

49. N-R Chiou, L.J. Lee and A.J. Epstein, “Self-assembled Polyaniline Nanofibers/Nanotubes”,
Chemistry of Materials, 19, 3589-3591 (2007).

50. N-R. Chiou, C. Lu, J. Guan, L.J. Lee, A.J. Epstein, “Synthesis and Applications of Aligned
Polyaniline and Polypyrrole Nanofibers”, Polymer Preprints, 48, 121-122, (2007).

51. J. Guan, N. Ferrell, B. Yu, D.J. Hansford and L.J. Lee, “Simultaneous Fabrication of Hybrid
Arrays of Nanowires and Micro/Nanoparticles by Dewetting on Micropillars”, Soft Matter,
3(11), 1369-1371 (2007).

52. H. He, L. Li and L.J. Lee, "Photopolymerization and Structure Formation of Methacrylic
Acid Based Hydrogels: the Effect of Light Intensity", Reactive and Functional Polymers, 68(1),
103-113 (2007).


                                                4
                                                5




53. X. Pan, J. Guan, J-W Yoo, A.J. Epstein, L.J. Lee and R.J. Lee, “Cationic Lipid Coated
Magnetic Nanoparticles Associated with Transferrin for Gene Delivery”, International Journal of
Pharmaceutics, 358, 263-270 (2008).

54. P. Pradhan, J. Guan, D. Lu, P. G. Wang, L.J. Lee and R.J. Lee, “A Facile Microfluidic
Method for Production of Liposomes”, Anticancer Research, 28, 943-948 (2008).

55. R. Lapalombella, X. Zhao, G. Triantafillou, B. Yu, Y. Lin, G. Lozanski, C. Cheney, N.
Heerema, D. Jarjoura, A. Lehman, L.J. Lee, R. Lee , M.A. Caligiuri, N. Muthusamy and J.C.
Byrd, “A Novel Raji-Burkitt’s Lymphoma Model for Preclinical and Mechanistic Evaluation of
CD52-Targeted Immunotherapeutic Agents”, Clinical Cancer Research, 14, 569-578 (2008).

56. N-R. Chiou, L.J. Lee, A.J. Epstein, “Porous Membrane Controlled Polymerization of
Nanofibers of Polyaniline and Its Derivatives”, Journal of Materials Chemistry, 18, 2085-2089
(2008).

57. S. Wang and L.J. Lee, “Flow Guided Dynamic Assembly”, ChemPhysChem, 9, 967-973
(2008).

58. S. Wang, X. Hu and L.J. Lee "Electrokinetics Induced Asymmetric Transport in Polymeric
Nanonozzles", Lab on a Chip, 8, 573-581 (2008).

59. K. Park, J. Jang, D. Irimia, J. Sturgis, L.J. Lee, P. Robinson, M. Toner and R. Bashir, “Living
Cantilever Arrays for Characterization of Mass of Single Live Cells in Fluids”, Lab on a Chip, 8,
1034-1041 (2008).

60. X. Zhang, H. He and L.J. Lee, “A Biodegradable, Immunoprotective, Dual Nanoporous
Capsule for Cell-Based Therapies”, Biomaterials, 29, 4253-4259 (2008).

61. R. Lapalombella, B. Yu, G. Triantafillou, Q. Liu, G. Lozanski, A. Ramanunni, L. Smith, W.
Blum, L. Andritsos, D-S Wang, A. Lehman, C-S Chen, A. Johnson, G. Marcucci, R. Lee, L.J.
Lee, N. Muthusamy and J.C. Byrd, “Lenalidomide Down-Regulates the CD20 Antigen and
Antagonizes both Direct, Complement, and Antibody Dependent Cellular Cytotoxicity of
Rituximab on Primary Chronic Lymphocytic Leukemia Cells”, Blood, 112(13), 5180-5189
(2008).

62. A. Yi, D.F. Farson, W. Lu and L.J. Lee, “Overview of Polymer Micro/Nanofabrication for
Biomedical Applications”, Advances in Polymer Technology, 27(4), 188-198 (2008).

63. X. Yang, C.G. Koh, S. Liu, X. Pan, R. Santhanam, B. Yu, Y. Peng, J. Pang, S. Golan, Y.
Talmon, Y. Jin, N. Muthusamy, J.C. Byrd, K.K. Chan, L.J. Lee, G. Marcucci and R.J. Lee,
“Transferrin Receptor-Targeted Lipid Nanoparticles for Delivery of an Antisense
Oligodeoxyribonucleotide against Bcl-2”, Molecular Pharmaceutics, 6, 221-230 (2009).

64. Y. Yuan, H. He, and L.J. Lee, “Protein A-based Immobilization of Antibody onto A
Polymeric Microfluidic Device for Enzyme-linked Immunosorbent Assay”, Bioengineering and
Biotechnology, 102(3), 891-901 (2009).


                                                 5
                                               6




65. X. Yang, X. Zhao, M.A. Phelps, L. Piao, Q. Liu, D.M. Rozewski, L.J. Lee, G. Marcucci,
M.R. Grever, J.C. Byrd, J.T. Dalton and R.J. Lee, “A Novel Liposomal Formulation of
Flavopiridol”, International Journal of Pharmaceutics, 365, 170-174 (2009).

66. G. Zhai, J. Wu, G. Xiang, W. Mao, B. Yu, H. Li, L. Piao, L.J. Lee and R.J. Lee, “A Folate
Receptor-Targeted Liposomal Formulation for Docetaxel Delivery”, Journal of Nanoscience and
Nanotechnology, 9, 2155-2161 (2009).

67. H. He, Y. Yuan, W. Wang, N-R Chiou and L.J. Lee, “Design and Testing of a Microfluidic
Biochip for Cytokine Enzyme-Linked Immunosorbent Assay (ELISA)”, Biomicrofluidics, 3,
022401 (2009). April 15, 2009 issue of Virtual Journal of Biological Physics Research

68. B. Yu, X. Zhao, L.J. Lee and R.J. Lee, “Targeted Delivery Systems for Oligonucleotide
Therapeutics”, American Association of Pharmaceutical Scientists Journal, 11(1), 195-203
(2009).

69. X. Hu, S. Wang and L.J. Lee, “"Single-Molecule DNA Dynamics in Tapering Contraction-
Expansion Microchannels under Electrophoresis", Journal of Physics Review E, 79, 041911
(2009).

70. Y. Xie, Y. Yang, X. Kang, L.J. Lee, and D.A. Kniss, “Assembly of Embryonic Stem
Cell/Scaffold Three-Dimensional Constructs Using Carbon Dioxide Assisted Polymer Fusion”,
Biotechnology Progress, 25(2), 535-542 (2009).

71. C-H Lin, J. Guan, S-W Chau and L.J. Lee, “Experimental and Numerical Analysis of DNA
Nanowire Array Formation by Surface Patterned Molecular Combing”, Journal of Physics D:
Applied Physics, 42, 02503 (2009).

72. X. Zhang, Y. Xie, C-G Koh and L. J. Lee, “A Novel 3-D Model for Cell Culture and Tissue
Engineering”, Biomedical Microdevices, 11, 795-799 (2009).

73. X. Zhang, C.G. Koh, B. Yu, S. Liu, L. Piao, G. Marcucci, R.J. Lee and L.J. Lee, “Transferrin
Receptor Targeted Lipopolyplexes for Delivery of Antisense Oligonucleotide G3139 in a Murine
K562 Xenograft Model”, Pharmaceutical Research, 26(6), 1516-1524 (2009).

74. J. Yang, C. Liu, Y. Yang, B. Zhu, L.J. Lee, H. Chen and Y.C. Jean „Analysis of Polystyrene
Surface Properties Using Nanoparticle Embedding Technique”, Journal of Polymer Science, Part
B: Polymer Physics, 47, 1535-1542 (2009).

75. S. Wang, X. Zhang, W. Wang, and L.J. Lee, “Semi-continuous Flow Electroporation Chip
for High Throughput Transfection on Mammalian Cells”, Analytical Chemistry, 81, 4414-4421
(2009).

76. C.G. Koh, X. Kang, Z. Fei, J. Guan, Y. Xie, B. Yu and L.J. Lee, “Assembly of PEI/DNA
Nanoparticles for Gene Delivery by Microfluidic Hydrodynamic Focusing”, Molecular
Pharmaceutics, 6(5), 1333-1342 (2009).



                                               6
                                               7




77. Y. Wu, B. Yu, A. Jackson, W. Zha, L.J. Lee, B.E. Wyslouzil, “Electrohydrodynamic
Spraying: A Novel One-Step Technique to Prepare Oligodeoxynucleotide (ODN) Encapsulated
Lipoplex Nanoparticles”, Molecular Pharmaceutics,, 6(5), 1371-1379 (2009).

78. C. Yen, H. He, W. Ho, and L.J. Lee, " Synthesis and Characterization of Nanoporous
Polycaprolactone Membranes via Thermally- and Nonsolvent-Induced Phase Separations for
Biomedical Device Applications”, J. Membrane Science, 343, 180-188 (2009).

79. X. Wen, H. He and L.J. Lee, “Antibody Immobilization with Biotin-Derivatized Poly(L-
lysine)-g-Poly(ethylene glycol) on Polymeric Microfluidic Chips for Enzyme-Linked
Immunosorbent Assay”, Journal of Immunology Methods, 350, 97-105 (2009).

80. W. Weecharangsan, B. Yu, Y. Zheng, S. Liu, J. Pang, L.J. Lee, G. Marcucci and R. Lee,
"Efficient Delivery of Antisense Oligodeoxyribonucleotide G3139 by Human Serum Albumin-
coated Liposomes", Molecular Pharmaceutics, 6, 1848-1855 (2009).

81. C.G. Koh, X. Zhang, S. Liu, S. Golan, B. Yu, X. Yang, J. Guan, Y. Jin, Y. Talmon, R.
Muthasamy, K.K Chan, J. Bryd, R.J. Lee, G. Marcucci and L.J. Lee, “Delivery of Antisense
Oligodeoxyribonucleotide Lipopolyplex Nanoparticles Assembled by Microfluidic
Hydrodynamic Focusing”, Journal of Controlled Release, 141, 62-69 (2010).

82. Y. Jin, B. Yu, S. Liu, L.J. Lee, R. Lee and G. Marcucci, “Transferrin Mediated Targeted
Delivery of GTI-2040 into Acute Myeloid Leukemia (AML) By pH-Sensitive Lipopolyplex
Nanoparticles”, Molecular Pharmaceutics, 7(1), 196-206 (2010).

83. Z. Fei, X. Hu, H. Choi, D. Farson and L. J. Lee, "Micro-nozzle Array Enhanced Sandwich
Electroporation of Embryonic Stem Cells", Analytical Chemistry, 82(1), 351-358 (2010).

84. L. Lei, C. Yang, H. Shi, W-C Liao, H. Huang, L.J. Lee, J. Castro and A. Yi, "Design and
Fabrication of an Affordable Polymer Micromixer for Medical and Biomedical Applications",
Polymer Engineering and Science, 50, 1594-1604 (2010).

85. L.B. Zimmerman, M.D. Rauscher, J. Ellis, P. Poukany and L.J. Lee, “Nanoimprinting Using
Self-assembled Ceramic Nanoislands”, Nanotechnology, 21(4), 045304 (2010).

86.Y. Wu, Z. Fei, L.J. Lee and B.E. Wyslouzil, “Coaxial Electro-hydrodynamic Spraying of
Plasmid DNA/Polyethylenimine (PEI) for Nonviral Gene Delivery”, Biotech. Bioeng., 105, 834 -
841 (2010).

87. P. Boukany, O. Hemminger, S-Q Wang and L.J. Lee, “Molecular Imaging of Slip in
Entangled DNA Solution”, Physical Review Letters, 105(2), 027802 (2010).

88. D. G. Perez; N. Higuita-Castro; S. Sharma; R. Reen; A. F. Palmer; K. Gooch; L.J. Lee; J.
Lannutti and D. Hansford, “High Throughput Assembly of Spatially Controlled 3D Cell Clusters
on a Micro/Nano Platform”, Lab on a Chip, 10, 775-782 (2010).

89. Y. Zheng, B. Yu, W. Weecharangsan, L. Piao, M. Darby, Y. Mao, R. Koynova, X. Yang, H.
Li, S. Xu, L.J. Lee, Y. Sugimotoc, R.W. Brueggemeier, R.J. Lee, “ Transferrin Conjugated

                                               7
                                               8




Lipid-coated PLGA Nanoparticles for Targeted Delivery of Aromatase Inhibitor 7α-APTADD to
Breast Cancer Cells”, International Journal of Pharmaceutics, 390(2), 234-241 (2010).

90. W. Weecharangsan, B. Yu, S. Liu, J. Pang, L.J. Lee, G. Marcucci and R.J. Lee,
“Bioreversible Disulfide-linked Liposomes: Effective Delivery Vehicle for Bcl-2 Antisense
Oligodeoxyribonucleotide G3139.”, Anticancer Res., 30, 31-38 (2010).

91. C. Zhou, B. Yu, X. Yang, T. Huo, L.J. Lee, R.F. Barth and R.J. Lee, “Lipid-coated Nano-
calcium-phosphate (LNCP) for Gene Delivery”, International Journal of Pharmaceutics, 392,
201-208 (2010).

92. X. Huang, R. Caddell, B. Yu, S. Xu, B. Theobald, L.J. Lee and R.J. Lee, “Ultrasound-
enhanced Microfluidic Synthesis of Liposomes.”, Anticancer Res., 30, 463-466 (2010).

93. C. Yen, H. He, Z. Fei, X. Zhang, L.J. Lee, and W.S. Ho, "Surface Modification of
Nanoporous Poly( -caprolactone) Membrane with Poly(ethylene glycol) to Prevent Biofouling:
Part I. Effects of Plasma Power and Treatment Time", International Journal of Polymeric
Materials, 59(11), 923-942 (2010).

94. C. Yen, H. He, Z. Fei, X. Zhang, L.J. Lee, and W.S. Ho, "Surface Modification of
Nanoporous Poly( -caprolactone) Membrane with Poly(ethylene glycol) to Prevent Biofouling:
Part II. Effects of Graft Density and Chain Length", International Journal of Polymeric
Materials, 59(11), 943-957 (2010).

95. J. Guan, P.E. Boukany, N-R Chiou, O. Hemminger, W. Zha, M. Cavanaugh and L.J. Lee,
“Laterally Ordered Nanochannel Arrays from DNA Combing and Imprinting”, Advanced
Materials, 22, 3997-4001 (2010).

96. S. Wang, X. Zhang, B. Yu, R.J. Lee and L.J. Lee, “Targeted Nanoparticles Enhanced Flow
Electroporation of Antisense Oligonucleotides in Leukemia Cells”, Biosensors and
Bioelectronics, 26(2), 778-783 (2010).


97. J. Xu, K.J. Kwak, L.J. Lee and G. Agarwal, “Lifting and Sorting of Charged Au
Nanoparticles by Electrostatic Forces in Atomic Force Microscopy”, Small, 6(19), 2105-2108
(2010).

98. A. Srivastava, Y. Yang, L.J. Lee and S. Ghosh, “Molecular Dynamics Simulations and
Experimental Validation of Glass Transition Temperature of Polystyrene Thin Films under CO 2
Pressure”, Modeling and Simulation in Materials Science and Engineering, 18(6), 65003-65024
(2010).

99. L. Li, L.J. Lee, J.M. Castro and A. Yi, "Improving Mixing Efficiency of A Polymer
Micromixer by Use of A Plastic Shim Divider," Journal of Micromechanics and
Microengineering, 20, 035012 (2010).

100. C H Lin, J Guan, S W Chau, L J Lee and S C Chen, “Experimental and Numerical Analysis
of DNA Nanowire Array Formation by Molecular Combing on Micropillar-Patterned Surface”,
Biomicrofluidics, 4, 034103, 1-15 (2010).
                                               8
                                               9




101. B. Yu, L.J. Lee and R.J. Lee, “Novel Receptor-targeted Drug Delivery Systems and
Therapeutic Strategies”, Molecular Membrane Biology, 27(7), 286-298 (2010).

102. O. Hemminger, P. Boukany, X. Hu, S. Wang and L.J. Lee, “Flow Visualization of
Viscoelastic Flow of Concentrated DNA Solutions through a Microscale 4:1 Planar Contraction
Device”, Journal of Non-Newtonian Fluid Mechanics, 165, 1613-1624 (2010).

103. K.J. Kwak, G. Valincius, W-C Liao, X. Hu, X. Wen, A. Lee, B. Yu, W. Lu, D. Vanderah
and L.J. Lee, “Formation and Analysis of Tethered Bilayer Lipid Structures”, Langmuir, 26(23),
18199-18208 (2010).

104. Y. Lim, J. Johnson, Z. Fei, Y. Wu, D. Farson, J.J. Lannutti, H. W. Choi and L.J. Lee,
“Micropatterning and Characterization of Electrospun Poly(ε-caprolactone)/Gelatin Nanofiber
Tissue Scaffolds by Femtosecond Laser Ablation for Tissue Engineering Applications”,
Biotechnology & Bioengineering, 108 (1), 116-126 (2011).

105. H. He, V. Grignol, C. Yen, N.B. Jones, M.I. Liang, K.A. Varker, G.B. Lesinski, W. Ho,
W.E. Carson, III and L.J. Lee, “Use of a Nanoporous Biodegradable Miniature Devices to
Regulate Cytokins Release for Cancer Treatment”, Journal of Controlled Release, 151, 239-245
(2011).

106. X. Hu, P. Boukany, O. Hemminger and L.J. Lee, “The Use of Microfluidics in Rheology”,
Macromolecular Materials and Engineering, 296, 308-320 (2011).

107. B. Yu, J. Zhu, W. Xue, Y. Wu, X. Huang, L.J. Lee and R.J. Lee, “Microfluidic Assembly of
Lipid-Based Oligonucleotide Nanoparticles”, Anticancer Research Journal, 31, 771-776 (2011).

108. X. Yang, P. Yong, B, Yu, J. Yu, Y. Mao, C. Zhou, L.J. Lee and R.J. Lee, "A Covalently
Stabilized Lipid-Polycation-DNA (sLPD) Vector for Antisense Oligonucleotide Delivery",
Molecular Pharmaceutics, 8, 709-715 (2011).

109. B. Henslee, A. Morss, X. Hu, G. Lafyatis and L.J. Lee, “Threshold Fields for
Electropermeabilization Are Measured To Be Independent of Cell Size”, Analytical Chemistry,
83, 3998-4003 (2011).

110. H. Li, L. Piao, B. Yung, B. Yu, G. Wang, L.J. Lee and R.J. Lee, “Efficient Delivery of Calf
Thymus DAN to Tumor by Folate Receptor Targeted Cationic Liposomes”, Biomaterials, 32,
6614-6620 (2011).

111. X. Wang, B. Yu, Y. Wu, X. Zou, R.J. Lee and L.J. Lee, “Efficient Down-regulation of
CDK4 by Novel Lipid Nanoparticle-mediated siRNA Delivery”, Anticancer Research Journal,
31, 1619-1626 (2011).


112. Y. Wu, Y-P Ho, Y. Mao, X. Wang, B. Yu, K.W. Leong and L.J. Lee, “Uptake and
Intracellular Fate of Multifunctional Nanoparticles: a Comparison between Lipoplexes and
Polyplexes via Quantum Dots-FRET”, Molecular Pharmaceutics, 9, ????-???? (2011).

                                               9
                                              10




113. Y. Wu, M. Crawford, B. Yu, Y. Mao, S. Nana-Sinkam and L.J. Lee, “MicroRNA Delivery
by Cationic Lipoplexes for Lung Cancer Therapy", Molecular Pharmaceutics, 8, 1381-1389
(2011).

114. P. E. Boukany, A. Morss, W-C Liao, B. Henslee, X. Zhang, B. Yu, X. Wang, Y. Wu, H.C.
Jung, L. Li, K. Gao, X. Hu, X. Zhao, O. Hemminger, W. Lu, G. Lafyatis and L.J. Lee,
“Nanochannel Electroporation Delivers Precise Amounts of Biomolecules into Living Cells ”,
Nature Nanotechnology, 6, 747-754 (2011), research highlight in Nature Methods, 8, 996-997
(2011).

115. C. Zhou, Y. Mao, Y. Sugimoto, N. Kanthamneni, B. Yu, R.W. Brueggemeier, L.J. Lee and
R.J. Lee, “Surfactant Vesicles, SPANosomes as Delivery Vehicles for Small Interfering RNA
(siRNA)”, Molecular Pharmaceutics, accepted.

116. Z. Fei, S. Sharma, Y. Wu, D. G. Perez, J.J. Lannutti, D. Hansford and L.J. Lee, “Gene
Delivery by Membrane Sandwich Electroporation of Cells Incubated on Nanofiber Feeder
Layer”, ACS Nano, accepted.


Polymer Nanocomposites/Foams/Supercritical CO2 Technology
1. M. Elkovitch, D.L. Tomasko and L.J. Lee, “Supercritical CO2 Assisted Polymer Blending”,
Polymer Engineering & Science, 39(10), 2075-2084 (1999).

2. M. Elkovitch, L. J. Lee and D.L. Tomasko, “Effect of Supercritical CO2 on Morphology
Development in Polymer Blending”, Polymer Engineering & Science, 40, 1850-1861 (2000).

3. C. Zeng and L.J. Lee, “Poly(methyl methacrylate) and Polystyrene/Clay Nanocomposites
Prepared by In-Situ Polymerization”, Macromolecules, 34, 4098-4103 (2001).

4. H. Wang, C. Zeng, M. Elkovitch, L.J. Lee and K.W. Koelling, “Processing and Properties of
Polymeric Nano-composites”, Polymer Engineering & Science, 41(11), 2036-2046 (2001).

5. M. Elkovitch, L. J. Lee and D.L. Tomasko, “Effect of Supercritical CO2 on PMMA/Rubber
and PS/Rubber Blending: Viscosity Ratio and Phase Inversion”, Polymer Engineering &
Science, 41(12), 2108-2125 (2001).

6. X. Han, K.W. Koelling, D.L. Tomasko and L.J. Lee, “Continuous Microcellular Polystyrene
Foam Extrusion with Supercritical CO2”, Polymer Engineering & Science, 42(11), 2094-2106
(2002).

7. P. Svoboda, C. Zeng, H. Wang, and L.J. Lee, “Morphology and Mechanical Properties of
PP/Organoclay Nanocomposites”, Journal of Applied Polymer Science, 87, 1562-1570 (2002).

8. D.L. Tomasko, H. Li, D. Liu, X. Han, M.J. Wingert, L.J. Lee and K.W. Koelling, “A Review
of CO2 Applications in the Processing of Polymers”, I&EC Research, 42(25), 6431-6456 (2003).



                                               10
                                              11




9. X. Han, C. Zeng, L.J. Lee, K.W. Koelling and D.L. Tomasko, “Extrusion of Polystyrene
Nanocomposite Foams with Supercritical CO2”, Polymer Engineering & Science, 43(6), 1261-
1275 (2003).

10. C. Zeng, X. Han, L.J. Lee, K.W. Koelling and D.L. Tomasko “Polymer/Clay Nanocomposite
Foams Prepared Using CO2”, Advanced Materials, 15(20), 1743-1747 (2003).

11. D.L. Tomasko, X. Han, D. Liu, W. Gao, K.W. Koelling and L.J. Lee, “Supercritical Fluid
Applications in Polymer Nanocomposites”, Current Opinion in Solid State & Materials Science,
8, 407-412 (2003).

12. H. Li, L.J. Lee and D.L. Tomasko, “Effect of Carbon Dioxide on the Interfacial Tension of
Polymer Melts”, I&EC Research, 43, 509-514 (2004).

13. L. Xu and L.J. Lee, “Effect of Nanoclay on Shrinkage Control of Low Profile Unsaturated
Polyester (UP) Resin Cured at Room Temperature”, Polymer, 45(21), 7325-7334 (2004).

14. X. Cao, L. J. Lee, T. Widya, and C.W. Macosko, "Polyurethane/Clay Nanocomposites
Foams: Processing, Structure and Properties", Polymer, 46, 775-783 (2005).

15. L. Xu and L.J. Lee, “Kinetic Analysis and Mechanical Properties of Nanoclay Reinforced
Unsaturated Polyester (UP) Resins Cured at Low Temperatures" Polymer Engineering and
Science, 45(4), 496-509 (2005).

16. J. Shen, C. Zeng and L.J. Lee, “Synthesis of Polystyrene-Carbon Nanofiber Microcellular
Foams”, Polymer, 46, 5218-5224 (2005).

17. L.J. Lee, C. Zeng, X. Cao, X. Han, J. Shen and G. Xu, “Polymer Nanocomposite Foams”,
Composite Science and Technology, 65(15-16), 2344-2363 (2005).

18. X. Han, L.J. Lee and D.L. Tomasko, “CO2 Foaming of Polymer Nanocomposite Blends”,
Aust. J. Chem., 58, 492-503 (2005).

19. J. Shen, X. Han and L.J. Lee, “Nanoscaled Reinforcement of Polystyrene Foams using
Carbon Nanofibers”, J. Cellular Plastics, 42(2), 105-126 (2006).

20. J. Shen, X. Cao and L.J. Lee, “Synthesis and Foaming of Water Expandable Polystyrene-
Clay Nanocomposites’, Polymer, 47(18), 6303-6310 (2006).

21. X. Han, J. Shen, H. Huang and L.J. Lee, “CO2 Foaming Based on Polystyrene / Poly (methyl
methacrylate) Blend and Nanoclay”, Polymer Engineering & Science, 47(2), 103-111 (2007).

22. G. Zhou, L.J. Lee and J. Castro, “Nanoclay and Long Fiber Reinforced Composites based on
Epoxy and Phenolic Resins", Journal of Applied Polymer Science, 108 (6), 3720-3726 (2008).

23. Z. Guo, J. Yang, M.E. Berg, M.J. Wingert, D.L. Tomasko, L.J. Lee and T. Daniel,
“Comparison of Carbon Nanofibers and Activated Carbon on Carbon Dioxide Foaming of
Polystyrene”, Journal of Cellular Plastics, 44, 453-468 (2008).

                                               11
                                             12




24. H. Chen, M-L Cheng, Y.C. Jean, L.J. Lee and J. Yang, “Effect of CO2 Exposure on Free
Volumes in Polystyrene Studied by Positron Annihilation Spectroscopy”, Journal of Polymer
Science, Part B: Polymer Physics, 46, 388-405 (2008).

25. Y.C. Jean, H. Chen, L.J. Lee and J. Yang, “Positron Annihilation Lifetime and Glass
Transition Temperatures in CO2 Sorption Polystyrene", Acta Physica Polonica, 113, 1385-1395
(2008).

26. V. Khanna, B. Bhakshi and L.J. Lee, “Carbon Nanofiber Production: Life Cycle Energy
Consumption and Environmental Impact”, Journal of Industrial Ecology, 12(3), 394-410 (2008).

27. Z. Guo, L.J. Lee and D.L. Tomasko, "CO2 Permeability in Polymer Nanocomposites and
Nanocomposite Foams", Industrial & Engineering Chemistry Research, 47(23), 9636-9643
(2008).

28. G. Zhou, S. Movva and L.J. Lee, “Preparation and Properties of Nanoparticle and Long Fiber
Reinforced Unsaturated Polyester Composites”, Polymer Composites, 30(7), 861-865 (2009).

29. S. Movva, G. Zhou, D. Guerra, and L.J. Lee, “Effect of Carbon Nanofibers on Mold Filling
in a Vacuum Assisted Resin Transfer Molding System”, J. Composite Materials, 43(6), 611-620
(2009).

30. Y.C. Jean, H.M. Chen, L.J. Lee, J. Yang, X. Gu, W.S. Hung, K.R. Lee, J.Y. Lai, Y.M. Sun
and C.C. Hu, “Positronium Chemistry in Polymeric Membrane Systems”, Materials Science
Forum, 607, 1-8 (2009).

31. H.M. Chen, L.J. Lee, J. Yang, X. Gu and Y.C. Jean, “Free Volumes in Polymer
Nanocomposites”, Materials Science Forum, 607, 177-179 (2009).

32. J. Yang, S.K. Yeh, N.R. Chiou, Z. Guo, T. Daniel and L.J. Lee, “Synthesis and Foaming of
Water Expandable Polystyrene-Activated Carbon Composites”, Polymer, 50, 3169-3173 (2009).

33. M.J. Wingert, S. Shukla, K.W. Koelling, D.L. Tomasko and L.J. Lee, “Shear Viscosity of
CO2-Plastized Polystyrene under High Static Pressure”, I&EC Research, 48(11), 5460-5471
(2009).

34. Z. Guo; S.K. Yeh; M.J. Wingert, D.L.Tomasko and L.J. Lee, “Comparison of Carbon
Nanofibers and Nanoclay on Rheology of Polystyrene under Supercritical Carbon Dioxide”,
Journal of Applied Polymer Science, 116(2), 1068-1076 (2010).

35. B. Zhu, W. Zha, J. Yang, C. Zhang and L.J. Lee, “Layered-Silicate Based Polystyrene
Nanocomposite Microcellular Foam Using Super Critical Carbon Dioxide as Blowing Agent”,
Polymer, 51, 2177-2184 (2010).

36. S-K Yeh, J. Yang, N-R Chiou, T. Daniel and L.J. Lee, “Introducing Water as a Co-Blowing
Agent in the Carbon Dioxide Extrusion Foaming Process for Polystyrene Thermal Insulation
Foams”, Polymer Engineering and Science, 50, 1577-1584 (2010).

                                              12
                                               13




37. Z. Cai, S. Movva, N-R Chiou, J. Castro and L.J. Lee, "Effect of Polyaniline-Surface
Modified Carbon Nanofibers on Cure Kinetics of Epoxy Resin", J. Applied Polymer Science,
118(4), 2328-2335 (2010).

38. S. Awad, H Chen, G. Chen, X. Gu, L.J. Lee, E.E. Abdel-Hady and Y.C. Jean, “Free
Volumes, Glass Transitions and Cross-links of Zinc Oxide/Waterborne Polyurethane
Nanocomposites”, Macromolecules, 44, 29-38 (2011).

39. C. Zhang, B. Zhu and L.J. Lee, “Extrusion Foaming of Polystyrene/Carbon Particles Using
Carbon Dioxide and Water as Co-blowing Agents”, Polymer, 52, 1847-1855 (2011).

40. R. Mulyanal, E. Cabreral, J.M. Castro and L.J. Lee, “Injection Molding of Water Containing
Thermoplastic Polyolefin”, International Polymer Processing, accepted.

41. A. Burley, Z. Gao, L.J. Lee, K.W. Koelling, I. Kusaka and D.L. Tomasko, “CO2 Bubble
Nucleation in Polystyrene: Experimental and Modeling Studies”, J. Applied Polymer Science,
accepted.

42. C. Zhang, B. Zhu and L.J. Lee, “Bimodal Polystyrene Foams Using Carbon Dioxide and
Water as Co-blowing Agents”, submitted to Polymer.

43. S. Movva, D. Guerra, X. Ouyang, J. Castro and L.J. Lee “Cure Kinetics of Carbon
Nanofiber/Vinyl Ester Nanocomposites at Low Temperature”, J. Applied Polymer Science,
accepted

44. S. Movva, X. Ouyang, J. castro and L.J. Lee, “Carbon Nanofiber Paper and Its Effect on
Cure Kinetics of Low Temperature Epoxy Resin”, POLYMER, accepted.


Reactive Processing and Thermoset Polymers
Resins
1. M. Tirrell, L.J. Lee and C.W. Macosko, "Conversion and Composition Profiles in
Polyurethane Reaction Molding," ACS Symposium #104, Polymerization Reactors & Processes,
149-179 (1979).

2. L.J. Lee and C.W. Macosko, "Heat Transfer in Polymer Reaction Molding," International
Journal of Heat and Mass Transfer, 23, 1479-1492 (1980).

3. I.S. Fridman, E.L. Thomas, L.J. Lee and C.W. Macosko, "Morphological Characterization of
RIM Polyester Based Polyurethanes," Polymer, 21, 393-402 (1980).

4. L.J. Lee, "Polyurethane Reaction Injection Molding: Process, Materials and Properties,"
Rubber Chemistry and Technology - Review Issue, 53, 542-549 (1980).

5. L.J. Lee, J.M. Ottino, W.E. Ranz and C.W. Macosko, "Impingement Mixing in Reaction
Injection Molding," Polymer Engineering & Science, 20, 868-874 (1980).


                                               13
                                               14




6. L.J. Lee, R.M. Griffith and J.G. Sommer, "Flow Analysis of Rubber Transfer Molding,"
Polymer Engineering & Science, 24, 403-414 (1984).

7. C.W. Macosko and L.J. Lee, "Heat Transfer and Property Development in Liquid Silicone
Rubber Molding," Rubber Chemistry and Technology, 2, 436-449 (1985).

8. Y.J. Huang and L.J. Lee, "Kinetics of Free Radical Polymerizations in Reactive Polymer
Processing," AIChE Journal, 31, 1585-1593 (1985).

9. Y.J. Huang, T.C. Hsu and L.J. Lee, "Effect of Compound Composition on Fast Reactions of
Polyurethane and Unsaturated Polyester in the Bulk State," Polymer, 26, 1247-1252 (1985).

10. T.C. Hsu and L.J. Lee, "Reaction Kinetics of Polyurethane-Polyester Interpenetrating
Polymer Network in the Bulk Polymerization," Polymer Engineering & Science, 25, 951-958
(1985).

11. T.C. Hsu and L.J. Lee, "Physical Properties of Transfer Molded Polyurethane - Polyester
Interpenetrating Polymer Network," Journal of Applied Polymer Science, 33, 793-807 (1987).

12. Y.M. Lee, Y.S. Yang and L.J. Lee, "Rheological Changes During the Polymerization of
Polyurethane Based IPN," Polymer Engineering & Science, 27, 716-726 (1987).

13. Y.J. Huang, J.D. Fan and L.J. Lee, "Casting of Diffusion-Controlled Free Radical
Polymerizations - Experimental and Theoretical Analysis," Journal of Applied Polymer Science,
33, 1315-1341 (1987).

+14.    Y.S. Yang and L.J. Lee, "Polymerization of Polyurethane-Polyester Interpenetrating
Polymer Network," Macromolecules, 20, 1490-1495 (1987).

15. Y.M. Lee and L.J. Lee, "Effect of Mixing and Reaction on a Fast Step Growth
Polymerization," Journal of International Polymer Processing, 1(3), 144-152 (1987).

16. Y.M. Lee and L.J. Lee, "Rheological Changes of Polyurethane Polymerization in Bulk and in
Solution," Polymer, 28, 2304-2309 (1987).

17. Y.S. Yang and L.J. Lee, "Rheo-kinetic Studies of Unsaturated Polyester Resins," Polymer
Processing Engineering, 5, 327-356 (1987).

18. Y.S. Yang, and L.J. Lee, "Comparison of Thermal and Infrared Spectroscopic Analyses in
the Formation of Polyurethane, Unsaturated Polyester and Their Blend," Journal of Applied
Polymer Science, 36, 1325-1342 (1988).

19. T.C. Hsu and L.J. Lee, "Processing of Polyurethane-Polyester IPN," Journal of Applied
Polymer Science, 36, 1157-1176 (1988).

20. T.C. Hsu and L.J. Lee, "Reaction Injection Molding of Polyureas, I. Kinetics Study,"
Polymer Engineering & Science, 28, 955-963 (1988).


                                               14
                                              15




21. Y.S. Yang and L.J. Lee, "Microstructure Formation in the Cure of Unsaturated Polyester
Resins," Polymer, 29, 1793-1800 (1988).

22. Y.M. Lee and L.J. Lee, "Interaction of Mixing, Diffusion and Kinetics of Fast
Diffusion-Controlled Polycondensations," Polymer-Plastics Technology Engineering, 28(2),
151-184 (1989).

23. M. Nelson and L.J. Lee, "Mixing Characteristics of Urethane Based Materials and Polyurea
in RIM," Journal of Applied Polymer Science, 37, 251-266 (1989).

24. K.J. Wang, T.J. Hsu and L.J. Lee, "Structure-Property-Processing Relationships of
Polyurethane-Polyester IPNs," Polymer Engineering & Science, 29, 397-404 (1989).

25. Y.S. Yang, L.J. Lee, S.K. Lo and P.J. Menardi, "Monitoring the Cure of Unsaturated
Polyester Resins by Pressure DSC and FTIR-PLC," Journal of Applied Polymer Science, 37,
2313-2330 (1989).

26. J.A. Molnar and L.J. Lee, "Mixing Study of L-Shape Mixhead in Reaction Injection
Molding," Journal of Applied Polymer Science, 37, 2295-2312 (1989).

27. Y.J. Huang and L.J. Lee, "Optimization of Diffusion-Controlled Free Radical
Polymerizations in a Distributed Parameter System," Chemical Engineering Science, 44, 363-
376 (1989).

28. S. Damani and L.J. Lee, "The Resin-Fiber Interface in Polyurethane and
Polyurethane-Unsaturated Polyester Hybrid", Polymer Composites, 11, 174-183 (1990).

29. Y.J. Huang and L.J. Lee, "Optimization of Diffusion-Controlled Free Radical
Polymerizations in Lumped Parameter Systems," Journal of Applied Polymer Science, 39, 2353-
2375 (1990).

30. K.J. Wang, Y.J. Huang and L.J. Lee, "Reaction Injection Molding of Polyureas, II.
Rheo-kinetic Changes and Model Simulation," Polymer Engineering & Science, 30, 654-664
(1990).

31. K.J. Wang, T.C. Hsu and L.J. Lee, "Rheo-kinetic Changes of Polyurea Reactions in
Solution," Journal of Applied Polymer Science, 41, 1055-1072 (1990).

32. Y.J. Huang, J.D. Fan and L.J. Lee, "A Free Radical Copolymerization Model for Simulating
Reactive Processing of Unsaturated Polyester Resins," Polymer Engineering & Science 30, 684-
692 (1990).

33. C.P. Hsu and L.J. Lee, "Structure Formation During the Copolymerization of Styrene and
Unsaturated Polyester Resins," Polymer, 32(12), 2263-2271 (1991).

34. S. Muzumdar and L.J. Lee, "Prediction of Gel-Time in the Cure of Unsaturated Polyester
Resins: Mechanistic and Statistical Analyses," Polymer Engineering & Science, 31(23), 1647-
1656 (1991).

                                               15
                                               16




35. F.R. Tollens and L.J. Lee, "Cure Analysis of Unsaturated Polyester Resins Using ESR, DSC
and Rheometry," Polymer, 34(1), 29-37 (1993).

36. Y.C. Chou and L.J. Lee, "Kinetics, Rheological and Morphological Changes of
Polyurethane-Unsaturated Polyester IPNs", ACS Advances in Chemistry Series, 239, 305-331
(1993).

37. C.P. Hsu and L.J. Lee, "Free Radical Crosslinking Copolymerization of Styrene/Unsaturated
Polyester Resins, Part I: Phase Separation and Microgel Formation," Polymer, 34(21), 4495-
4505 (1993).

38. C.P. Hsu and L.J. Lee, "Free Radical Crosslinking Copolymerization of Styrene/Unsaturated
Polyester Resins, Part II: An ESR Study," Polymer, 34(21), 4506-4515 (1993).

39. C.P. Hsu and L.J. Lee, "Free Radical Crosslinking Copolymerization of Styrene/Unsaturated
Polyester Resins, Part III: Kinetics-Gelation Mechanism," Polymer, 34(21), 4516-4523 (1993).

40. Y.C. Chou and L.J. Lee, "Reaction Induced Phase Separation during the Formation of a
Polyurethane-Unsaturated Polyester Interpenetrating Polymer Networks," Polymer Engineering
& Science, 34(16), 1239-1249 (1994).

41. Y.Y. Chiu and L.J. Lee, "Microgel Formation in the Free Radical Crosslinking
Polymerization of EGDMA, Part I: Experimental," Journal of Polymer Science, Polymer
Chemistry Edition, 33, 257-267 (1995).

42. Y.Y. Chiu and L.J. Lee, "Microgel Formation in the Free Radical Crosslinking
Polymerization of EGDMA, Part II: Simulation," Journal of Polymer Science, Polymer
Chemistry Edition, 33, 269-283 (1995).

43. Y.C. Chou and L.J. Lee, "Mechanical Properties of Urethane-Unsaturated Polyester IPN,"
Polymer Engineering & Science, 35(12), 976-988 (1995).

44. Y.Y. Chiu, R. Saito and L.J. Lee, "Modification of Unsaturated Polyester Resins for
Viscosity Control", Polymer, 37(11), 2179-2190 (1996).

45. S. Muzumdar and L.J. Lee, "Chemorheological Analysis of Unsaturated Polyester-Styrene
Copolymerization”, Polymer Engineering & Science, 36(7), 943-952 (1996).

46. X. Sun, J. Toth and L.J. Lee, “Chemorheology of Polyurethane-Isocyanurate Formation,”
Polymer Engineering & Science, 37(1), 143-152 (1997).

47. X. Sun, Y.Y. Chiu and L.J. Lee, "Analysis of Free Radical Cross Linking Copolymerization
of MMA-EGDMA," Industrial and Engineering Chemistry Research, 36, 1343-1351 (1997).

48. L. Li, X. Sun and L.J. Lee, “Low Temperatures Cure of Vinylester Resins”, Polymer
Engineering & Science, 39(4), 646-661 (1999).


                                               16
                                              17




49. L. Li and L. J. Lee, “Effect of Inhibitors and Retarders on Low Temperature Free Radical
Crosslinking Polymerization between Styrene and Vinyl Ester Resin”, Polymer Engineering &
Science, 41(1), 53-65 (2001).

50. H. Yang and L. J. Lee, “Comparison of Unsaturated Polyester and Vinylester Resins Cured
in Low Temperature Polymerization”, Journal of Applied Polymer Science, 79, 1230-1242
(2001).

51. H. Yang and L.J. Lee, “A Kinetic Model for Free-radical Crosslinking Co-polymerization of
Styrene/Vinylester Resin”, Polymer Composites, 22(5), 668-679 (2001).

52. H. Yang and L. J. Lee, “Effects of Resin Chemistry on Redox-Polymerization of Unsaturated
Polyester Resins”, Journal of Applied Polymer Science, 84, 211-227 (2002).

53. L. Li and L.J. Lee, “Effect of A Chelating Agent- 2, 4 P on Low Temperature Cure of
Vinylester and Unsaturated Polyester Resins”, Polymer Composites, 23(6), 971-990 (2002).

54. L. Li, X. Cao and L.J. Lee, “Effect of Dual-Initiator on Low Temperature Curing of
Unsaturated Polyester Resins”, Polymer, 45(19), 6601-6612 (2004).

Low Profile Additives
55. L. Kiaee, Y.S. Yang and L.J. Lee, "Effect of Low Profile Additives on the Morphology and
Curing of Unsaturated Polyester Resins," AIChE Symposium, Series 260, 84, 52-73 (1988).

56. M. Kinkelaar, C.P. Hsu and L.J. Lee, "Interactions of Reaction, Rheological Changes,
Microstructure Formation and Volume Change in the Cure of Low Profile Unsaturated Polyester
Resins," SAMPE Quarterly, 21(4), 40-47, July (1990).

57. C.P. Hsu, M. Kinkelaar, P. Hu and L.J. Lee, "Effect of Thermoplastic Additives on the Cure
of Unsaturated Polyester Resins," Polymer Engineering & Science, 31(20), 1450-1460 (1991).

58. M. Kinkelaar and L.J. Lee, "Development of a Dilatometer and Its Application to Low
Shrink Unsaturated Polyester Resins," Journal of Applied Polymer Science, 45, 37-50 (1992).

59. M. Kinkelaar, B. Wang, and L.J. Lee, "Shrinkage Behavior of Low Profile Unsaturated
Polyester Resins", Polymer, 35(14), 3011-3022 (1994).

60. R.R. Hill, S. Muzumdar and L.J. Lee, "Analysis of Volumetric Changes of Unsaturated
Polyester Resins During Curing," Polymer Engineering & Science, 35(10), 852-859 (1995).

61. M. Kinkelaar and L.J. Lee, "Dilatometric Study of Low Profile Unsaturated Polyester
Resins," Polymer Engineering & Science, 35(10), 823-836 (1995).

62. R. Saito, W.M. Kong and L.J. Lee, "Thickening Behavior and Shrinkage Control of Low
Profile Unsaturated Polyester Resins", Polymer, 37(16), 3567-3576 (1996).

63. W. Li and L.J. Lee, “Shrinkage Control of Low Profile Unsaturated Polyester Resins at Low
Temperature Cure”, Polymer, 39(23), 5677-5687 (1998).

                                               17
                                              18




64. W. Li and L.J. Lee, “Low Temperature Cure of Unsaturated Polyester Resins with
Thermoplastic Additives, I. Dilatometry and Morphology Study”, Polymer, 41(2), 685-696
(2000).

65. W. Li and L.J. Lee, “Low Temperature Cure of Unsaturated Polyester Resins with
Thermoplastic Additives, II. Structure Formation and Shrinkage Control Mechanism”, Polymer,
41(2), 697-710 (2000).

66. W. Li and L.J. Lee, “Low Temperature Cure of Unsaturated Polyester Resins with
Thermoplastic Additives, III. Modification of Polyvinyl Acetate for Better Shrinkage
Control”, Polymer, 41(2), 711-718 (2000).

67. X. Cao and L.J. Lee, “Effect of Co-Promoter and Secondary Monomer on Shrinkage Control
of Unsaturated Polyester/Styrene/Low Profile Additive SystemsCured at Low Temperatures”,
Journal of Applied Polymer Science, 82, 738-749 (2001).

68. X. Cao and L.J. Lee, “Control of Shrinkage and Final Conversion of Vinylester Resin Cured
in Low Temperature Molding Process”, Journal of Applied Polymer Science, 90, 1486-1496
(2003).

69. X. Cao and L.J. Lee, “Control of Shrinkage and Residual Styrene of Unsaturated Polyester
Resins Cured at Low Temperatures, I. Effect of Curing Agents”, Polymer, 44(6), 1893-1902
(2003).

70. X. Cao and L.J. Lee, “Control of Shrinkage and Residual Styrene of Unsaturated Polyester
Resins Cured at Low Temperatures, II. Effect of Comonomer”, Polymer, 44(5), 1507-1516
(2003).

Composite Manufacturing
1. L.J. Lee, "Curing of Compression Molded Sheet Molding Compound," Polymer Engineering
& Science, 21, 483-492 (1981).

2. L.J. Lee, L.F. Marker and R.M. Griffith, "The Rheology and Mold Flow of Polyester Sheet
Molding Compounds," Polymer Composites, 3, 209-218 (1981).

3. J.D. Fan, J.M. Marinelli and L.J. Lee, "Optimization of Polyester Sheet Molding Compounds
I. Experimental Study," Polymer Composites, 7, 239-249 (1986).

4. J.D. Fan and L.J. Lee, "Optimization of Polyester Sheet Molding Compounds II. Theoretical
Modeling," Polymer Composites, 7, 250-260 (1986).

5. J.D. Fan, Y.T. Im, J. Kim and L.J. Lee, "Curing of Sheet Molding Compound in Molds with
Substructures," Polymer Engineering & Science, 29, 740-748 (1989).

6. J.A. Molnar, L. Trevino and L.J. Lee, "Liquid Flow in Molds with Prelocated Fiber Mats,"
Polymer Composites, 10, 414-423 (1989).


                                               18
                                               19




7. J.D. Fan, J. Kim, Y.T. Im, and L.J. Lee, "Flow Analysis of Sheet Molding Compounds in
Compression Molding," Journal of International Polymer Processing, 6(1), 61-72 (1991).

8. L. Trevino, K. Rupel, W.B. Young, M.J. Liou and L.J. Lee, "Analysis of Resin Injection
Molding in Molds with Preplaced Fiber Mats: I. Permeability and Compressibility
Measurements," Polymer Composites, 12, 20-29 (1991).

9. W.B. Young, K. Rupel, K. Han, L.J. Lee and M.J. Liou, "Analysis of Resin Injection Molding
in Molds with Preplaced Fiber Mats: II. Numerical Simulation and Experiments of Mold
Filling," Polymer Composites, 12, 30-38 (1991).

10. W.B. Young, K. Han, L.H. Fong, L.J. Lee and M.J. Liou, "Flow Simulation in Molds with
Preplaced Fiber Mats," Polymer Composites, 12, 391-403 (1991).

11. R.J. Lin, L.J. Lee and M.J. Liou, "Non-isothermal Mold Filling and Curing Simulation in
Thin Cavities with Preplaced Fiber Mats," Journal of International Polymer Processing., 4, 356-
369 (1991).

12. M.J. Perry, L.J. Lee and C.W. Lee, "Cure Monitoring of Graphite/Epoxy Composites by
Scaling Analysis and Thermocouple Piles," Journal of Composite Materials, 26(2), 274-292
(1992).

13. J. Kim, Y.C. Shiau, L.J. Lee and Y.T. Im, "Compression Molding Simulation of Chopped-
Fiber-Reinforced Polymeric Composites in Plate-Rib type Geometry," Polymer Composites,
13(2), 97-107 (1992).

14. L. Kalra, M.J. Perry and L.J. Lee, "Automation of Autoclave Cure of Epoxy/Graphite
Composite," Journal of Composite Materials, 26(17), 2567-2584 (1992).

15. M.J. Perry, J. Xu, Y. Ma and L.J. Lee, "Analysis of Thermal Characteristics of Alternative
Mold Materials for Resin Transfer Molding", SAMPE Quarterly, 23(4), 20-34, July (1992).

16. J.Y. Xu, J. Kim, T. Ho and L.J. Lee, "Compression Molding of SMC in Plate-Rib Type
Geometry," Polymer Composites, 14(1), 51-58 (1993).

17. K. Han, L. Trevino, L.J. Lee and M.J. Liou, "Fiber Mat Deformation in Liquid Composite
Molding: I. Experimental Analysis," Polymer Composites, 14(2), 144-150 (1993).

18. R.J. Lin, L.J. Lee and M.J. Liou, "Mold Filling and Curing Analysis in Resin Transfer
Molding and Structural Reaction Injection Molding," Polymer Composites, 14(1), 71-81 (1993).

19. L.J. Lee, "Material Characterization in Liquid Composite Molding," Makromolecular
Chemistry, Macromolecular Symposium, 68, 169-191 (1993).

20. K. Han, L.J. Lee and M.J. Liou, "Fiber Mat Deformation in Liquid Composite Molding: II.
Modeling," Polymer Composites, 14(2), 151-160 (1993).



                                                19
                                               20




21. N. Patel, V. Rohatgi and L.J. Lee, "Influence of Processing and Material Variables on Resin-
Fiber Interface in Liquid Composite Molding," Polymer Composites, 14(2), 161-172 (1993).

22. J.T. Twu, R.R. Hill, T.J. Wang and L.J. Lee, "Numerical Simulation of Non-isothermal SMC
Molding," Polymer Composites, 14(6), 503-514 (1993).

23. T.J. Wang, C.H. Wu and L.J. Lee, "In-Plane Permeability Measurement and Analysis in
Liquid Composite Molding," Polymer Composites, 15(4), 278-288 (1994).

24. N. Dziewatkoski, J.Y. Xu, L.J. Lee and J.M. Castro, "Effect of Two Stage Pressure Molding
on Surface Quality of SMC Panels," Polymer Composites, 15(2), 106-117 (1994).

25. L.H. Fong, J.Y. Xu and L.J. Lee, "Preforming Analysis of Thermoformable Fiber Mats,
Deformation Modes and Reinforcement Characterization," Polymer Composites, 15(2), 134-146
(1994).

26. L.H. Fong and L.J. Lee, "Preforming Analysis of Thermoformable Fiber Mats. Effect of
Deformation on Mold Filling," Journal of Reinforced Plastics and Composites, 13, 637-663
(1994).

27. J.Y. Xu and L.J. Lee, "Analysis of Preforming Process for a Thermoformable Fiber Mats"
Journal of Advanced Materials, 33-40, October (1994).

28. C.H. Wu, T.J. Wang and L.J. Lee," Transverse Permeability Measurement and Analysis in
Liquid Composite Molding," Polymer Composites, 15(4), 289-298 (1994).

29. L.J. Lee, "Mold Filling and Cure Modeling of RTM," Composites Structure, 27, 109-120
(1994).

30. J.T. Twu, S.C. Chen and L.J. Lee, "Simulation Based Process Design of SMC Compression
Molding," Polymer Composites, 15(5), 313-326 (1994).

31. N. Patel, V. Rohatgi and L.J. Lee, "Micro-scale Flow Behavior and Void Formation
Mechanism during Impregnation Through a Unidirectional Stitched Fiberglass Mat," Polymer
Engineering & Science, 35(10), 837-851 (1995).

32. N. Patel and L.J. Lee, "Effects of Fiber Mat Architecture on Void Formation and Removal in
Liquid Composite Molding", Polymer Composites, 16(5), 386-399 (1995).

33. J.T. Twu and L.J. Lee, "Application of Artificial Neural Networks for the Optimal Design of
SMC Compression Molding", Polymer Composites, 16(5), 400-408 (1995).

34. L. Fong and L.J. Lee, "Preforming Simulation of Thermoformable Fiber Mats Using
Geometric Modeling Approach," Science & Engineering of Composite Materials, 4(3), 133-142
(1995).




                                               20
                                              21




35. T.J. Wang, L.J. Lee, and W.B. Young, "A Modification of the Control Volume Finite
Element Method for Mold Filling Simulation," Journal of International Polymer Processing,
10(1), 82-90 (1995).

36. T.J. Wang, R.J. Lin, and L.J. Lee, "Tool Heat Transfer Analysis in Resin Transfer Molding,"
Journal of International Polymer Processing, 10(4), 364-373 (1995).

37. V. Rohatgi, N. Patel and L.J. Lee, "Experimental Investigation of Flow Induced Microvoids
during Impregnation of Unidirectional Stitched Fiberglass Mat", Polymer Composites, 17(2),
161-170 (1996).

38. N. Patel and L.J. Lee, "Modeling of Void Formation and Removal in Liquid Composite
Molding. Part I: Wettability Analysis, "Polymer Composites, 17(1), 96-103 (1996).

39. N. Patel and L.J. Lee, "Modeling of Void Formation and Removal in Liquid Composite
Molding. Part II: Model Development and Implementation", Polymer Composites, 17(1), 104-
114 (1996).

40. D.R. Calhoun, S. Yalvac, D.G. Wetters, C.H. Wu, T.J. Wang, J.S. Tsai and L.J. Lee, "Mold
Filling Analysis in Resin Transfer Molding", Polymer Composites, 17(2), 251-264 (1996).

41. K. Han and L.J. Lee, "Dry Spot Formation and Changes in Liquid Composite Molding, Part
I: Experimental," Journal of Composite Materials, 30(13), 1458-1474 (1996).

42. K. Han and L.J. Lee, "Dry Spot Formation and Changes in Liquid Composite Molding, Part
II: Simulation", Journal of Composite Materials, 30(13), 1475-1493 (1996).

43. V. Rohatgi and L.J. Lee, “Moldability of Tackified Fiber Preforms in Liquid Composite
Molding,” Journal of Composite Materials, 31 (7), 720-744 (1997).

44. J. Ni, Y. Zhao, L.J. Lee and S. Nakamura, “Analysis of Two-Regional Flow in Liquid
Composite Molding,” Polymer Composites, 18 (2), 254-269 (1997).

45. J. Castro, S. Conover, C. Wilkes, K. Han, H.T. Chiu and L.J. Lee, “Manufacturing of
Composite Links by Structural Reaction Injection Molding,” Polymer Composites, 18 (5), 585-
594 (1997).

46. S.J. Tsai, S.J. Li and L.J. Lee, “Microstructural Analysis of Composite Tubes Made by
Braided Fiber Preform and Resin Transfer Molding,” Journal of Composite Materials, 32(9),
829-850 (1998).

47. Y. Wu, R. Shivpuri and L.J. Lee, “Effect of Macro and Micro Voids on Elastic
Properties of Polymer Composites”, Journal of Reinforced Plastics and Composites, 17(15),
1391-1402 (1998).

48. K. Han, J. Ni, J. Toth, L.J. Lee and J. Greene, “Injection-Compression of Liquid Composite
Molding,” Polymer Composites, 19(4), 487-496 (1998).


                                               21
                                               22




49. S.Y. Hu, S.C. Chen, J.T. Twu and L.J. Lee, “Simulations of Cyclic, Transient Variations of
Mold Temperature in SMC Compression Molding”, Polymer Composites, 19(4), 311-324
(1998).

50. J. Shih and L.J. Lee, “Effect of Fiber Architecture on Permeability in Liquid Composite
Molding”, Polymer Composites, 19(5), 626-639 (1998).

51. X. Sun, S.J. Li and L.J. Lee, “Analysis of Vacuum Infusion Resin Transfer Molding, Part I-
SCRIMP Based on a High Permeable Medium”, Polymer Composites, 19(6), 807-817 (1998).

52. J. Ni, S.J. Li, X. Sun and L.J. Lee, “Analysis of Vacuum Infusion Resin Transfer Molding,
Part II- SCRIMP Based on Grooves”, Polymer Composites, 19(6), 818-829 (1998).

53. C-H Wu, H.T. Chiu, L.J. Lee and S. Nakamura, “Simulation of Resin Transfer Molding
Using an Eulerian-Lagrangian Approach,” Journal of International Polymer Processing, 8(4),
389-397 (1998).

54. B. Yu and L. J. Lee, “A Simplified In-Plane Permeability Model for Textile Fabrics”,
Polymer Composites, 21(5), 660-670 (2000).

55. H.T. Chiu, B. Yu, S.C. Chen and L.J. Lee, “Heat Transfer during Flow and Resin Reaction
through Fiber Reinforcement”, Chemical Engineering Science, 55, 3365-3376 (2000).

56. S. Li and L.J. Lee, “Preforming Analysis of Biaxial Braided Fabrics Sleeving on Pipes and
Ducts”, Journal of Composite Materials, 34 (6), 479-501 (2000).

57. Z. Ding, S. Li, H. Yang, L.J. Lee, H. Engelen and P.M. Puckett, “Numerical and
Experimental Analysis of Resin Flow and Cure in Resin Injection Pultrusion”, Polymer
Composites, 21(5), 762-778 (2000).

58. B. Yu, H-T Chiu and L.J. Lee, “Analysis of Flow and Heat Transfer in Liquid Composite
Molding”, Journal of International Polymer Processing, 15(3), 273-283 (2000).

59. L. Lu, R. Shivpuri and L. J. Lee, “Investigating Process Induced Micro Voids Effect on the
Elastic Properties of LCM Polymer Composites”, Trans. North American Manufacturing
Research Inst. SME, XXXVIII, 93-98 (2000).

60. C-H Shih and L. J. Lee, “Tackification of Textile Fiber Preforms in Resin Transfer
Molding”, Journal of Composite Materials, 35(21), 1954-1981 (2001).

61. C-H Shih, Q. Liu and L.J. Lee, “Vacuum Assisted Resin Transfer Molding Using Tackified
Fiber Preforms”, Polymer Composites, 22(6), 721-729 (2001).

62. B. Yu, L.J. Lee and H. Cao, “Fractal Characters of Pore Microstructures of Textile Fabrics”,
Fractals, 9(2), 155-163 (2001).

63. C-H Shih and L.J. Lee, “Analysis of Void Removal in Liquid Composite Molding Using
Microflow Models’, Polymer Composites, 23(1), 120-131 (2002).

                                                22
                                               23




64. H.T. Chiu and L.J. Lee, “Simulation of Liquid Composite Molding based on Control-Volume
Finite Element Method”, International Journal of Polymer Engineering, 22(3), 155-175 (2002).

65. R. Hogade, M. Li, J.M. Castro and L.J. Lee, “Development of an Isothermal Lubricating
Layer Model for Injection Pultrusion of Electronic Pre-pregs”, Polymer Engineering & Science,
23(1), 1-9 (2002).

66. B. Yu, L.J. Lee and H. Cao, “A Fractal In-plane Permeability Model for Fabrics”, Polymer
Composites, 23(2), 201-221 (2002).

67. S. Li, Z. Ding, L. Xu, L.J. Lee and H. Engelen “Influence of Heat Transfer and Curing on the
Quality of Pultruded Composites, Part I. Experimental”, Polymer Composites, 23(5), 947-956
(2002).

68. Z. Ding, L. Xu, S. Li, and L.J. Lee, “Influence of Heat Transfer and Curing on the Quality of
Pultruded Composites, Part II. Modeling and Simulation”, Polymer Composites, 23(5), 957-969
(2002).

69. S. Li, L.J. Lee and J.M. Castro, “Effective Mass Diffusivity in Composites”, Journal of
Composite Materials, 36 (14), 1709-1724 (2002).

70. S. Li, L. Xu, Z. Ding, L.J. Lee and H. Engelen “Experimental and Theoretical Analysis of
Pulling Force in Pultrusion and Resin Injection Pultrusion, Part I. Experimental”, Journal of
Composite Materials, 37(2), 163-189 (2003).

71. Z. Ding, L. Xu, S. Li and L.J. Lee, “Experimental and Theoretical Analysis in Pultrusion and
Resin Injection Pultrusion, Part II. Modeling and Simulation”, Journal of Composite Materials,
37(3), 195-216 (2003).

Thermoplastic Processing
1. J.M. Marinelli and L.J. Lee, "Experimental Analysis of Plastic Sheet Extrusion," Advances in
Polymer Technology, 5, 239-256 (1985).

2. R.W. Nelson, D. Chan, B. Yang and L.J. Lee, "Dynamic Behavior of a Single Screw
Plasticating Extruder, I. Experimental Study," Polymer Engineering & Science, 26, 144-151
(1986).

3. D. Chan, R.W. Nelson and L.J. Lee, "Dynamic Behavior of a Single Screw Plasticating
Extruder, II. Dynamic Modeling," Polymer Engineering & Science, 26, 152-161 (1986).

4. J.F. Stevenson, L.J. Lee and R.M. Griffith, "Multidimensional Control of Profile Extrusion by
Thermal Methods," Polymer Engineering & Science, 26, 233-238 (1986).

5. B. Yang and L.J. Lee, "Process Control of Polymer Extrusion, Part I: Feedback Control,"
Polymer Engineering & Science, 26(3), 197-204 (1986).



                                                23
                                               24




6. B. Yang and L.J. Lee, "Process Control of Polymer Extrusion, Part II: Feedforward Control,"
Polymer Engineering & Science, 26(3), 205-213 (1986).

7. K.J. Wang and L.J. Lee, "Rheological and Extrusion Behavior of Dispersed Multiphase
Polymeric Systems," Journal of Applied Polymer Science, 33, 431-453 (1987).

8. B. Yang and L.J. Lee, "Effect of Die Temperature on the Flow of Polymer Melts, Part I. Flow
Inside the Die," Polymer Engineering & Science, 27, 1079-1087 (1987).

9. B. Yang and L.J. Lee, "Effect of Die Temperature on the Flow of Polymer Melts, Part II.
Extrudate Swell," Polymer Engineering & Science, 27, 1088-1094 (1987).

10. B. Yang and L.J. Lee, "Process Control of Profile Extrusion Using Thermal Methods, I.
Mathematical Modeling and System Analysis," Polymer Engineering & Science, 28, 697-707
(1988).

11. B. Yang and L.J. Lee, "Process Control of Profile Extrusion Using Thermal Method, II.
Closed Loop Control," Polymer Engineering & Science, 28, 708-717 (1988).

12. D. Chan and L.J. Lee, "Analysis of Molecular Orientation and Internal Stresses in Extruded
Plastic Sheets," Polymer Engineering & Science, 29, 163-170 (1989).

13. D. Chan and L.J. Lee, "Stress Development in Plastic Sheet Extrusion," Polymer Engineering
& Science, 29, 731-739 (1989).

14. J-Y Nieh and L.J. Lee, “Analysis of Hot Plate Welding of PP, Part I-Crystallization
Kinetics,” Polymer Engineering & Science, 38(7), 1121-1132 (1998).

15. J-Y Nieh, J. Ni and L.J. Lee, “Analysis of Hot Plate Welding of PP, Part II-Process
Simulation,” Polymer Engineering & Science, 38(7), 1133-1141 (1998).

16. Y-J Juang, D. Bruer, L.J. Lee, K.W. Koelling, N. Srinivasan, C. Drummond, and B.C. Wong,
“A Method for Assessing the Effect of Polymer Sheeting Rheology, Surface Pattern, and
Processing Conditions on Glass Lamination”, Journal of Applied Polymer Science, 80, 521-528
(2001).

17. Y-J Juang, L.J. Lee and K.W. Koelling, “Rheological Analysis of PVB near Glass Transition
Temperature”, Polymer Engineering & Science, 41(2), 275-292 (2001).

18. L-T Huang, P-S Hsu, S.C. Chen, J-Y Lai and L.J. Lee, “PTFE Paste Extrusion and
Membrane Pore Size Control”, Advances in Polymer Technology, 26(3), 163-172 (2008).


BOOK CHAPTERS
1. L.J. Lee, "Reaction Injection Molding," Ch. 12, Volume 4 (2), Comprehensive Polymer
Science, Pergamon Press, pp 379-426, 1989.



                                                24
                                              25




2. W.K. Lee and L.J. Lee, "Computer Control of Extrusion," Ch. 13, Volume 4 (2),
Comprehensive Polymer Science, Pergamon Press, pp 427-450, 1989.

3. L.J. Lee, "Modeling and Computer Simulation of Reactive Processing", Ch. 20,
Comprehensive Polymer Science-First Supplement, Pergamon Press, pp 575-618, 1992.

4. L.J. Lee, "Liquid Composite Molding," Advanced Composites Manufacturing, Edited by T.
Gutowski, John Wiley & Sons, Ch. 10, pp 393-456, 1997.

5. V. Rohatgi, L.J. Lee and A. Melton, “Overview of Fiber Preforming,” Resin Transfer Molding
for Aerospace Structures, Edited by T. Kruckenberg and R. Paton, Chapman & Hall, Sydney,
Ch. 6, pp 148-176, 1998.

6. L.J. Lee, “BioMEMS”, Encyclopedia of Chemical Processing, Edited by Sunggyu Lee,
Taylor & Francis, New York, pp161-169, 2005.

7. L.J. Lee, L. Yu, K.W. Koelling, and M.J. Madou, “Injection Molding for Microfluidic
Applications” in Precision Injection Molding, Edited by J. Greener and R.Wimberger-Friedl,
Hanser/Gardner Publications, Ch. 8, pp 169-238, 2006.

8. L. J. Lee, S-T Yang, S. Lai, Y. Bai, W-C Huang and Y-J Juang, “Microfluidic Enzyme-Linked
Immunosorbent Assay (ELISA) Technology” in Advances in Clinical Chemistry, Volume 42,
Edited by G. Makowski, Elsevier Inc., pp 255-295, 2006.

9. L.J. Lee, “Nanoscale Polymer Fabrication for Biomedical Applications”, in Volume
“Biomedical and Biological Nanotechnology” in the Kluwer Series of BioMEMS and
Biomedical Nanotechnology, Edited by M. Ferrari, Springer Science, Ch. 3, pp 51-96, 2006.

10. J. Guan, H. He, B. Yu and L.J. Lee, “Polymeric Nanostructures for Controlled Drug and
Gene Delivery” in Biomedical Nanostructures, Edited by K.E. Gonsalves, C.T. Laurencin, C.
Halberstadt and L.S. Nair, John Wiley & Sons, Inc., pp 115-137, 2008.

11. J. Guan, X. Pan, L.J. Lee and R.J. Lee, “Therapeutic Gene Delivery” in Biopharmaceutical
Drug Design and Development, Edited by S. Wu-Pong and Y. Rojanasakul, Humana Press, Ch.
8, 2008.

12. B. Yu, R.J. Lee and L.J. Lee, “Microfluidic Methods for Production of Liposomes”, Methods
in Enzymology/ Vol. 465 – Liposomes, Part G, Ch. 7, pp129-142, Elsevier Inc. 2009.

13. J. Yang, B. Zhu and L.J. Lee, “Polymer Nanocomposites Prepared by Suspension
Polymerization of Inverse Emulsion” in Polymer Nanocomposites by Emulsion and Suspension,
Nanoscience and Nanotechnolgy Series, edited by V. Mittal, The Royal Society of Chemistry,
Cambridge, UK, Ch. 7, p142-166, 2010.

14. J. Guan and L.J. Lee, “Guided Assembly by Surface Controlled Dewetting and Evaporation”,
in Evaporative Self-assembly of Ordered Complex Structures, edited by Z. Lin, World Scientific
Publishing Company, Ch. 8, 2011.


                                              25

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:0
posted:7/5/2013
language:Unknown
pages:25
caifeng li caifeng li
About