Electricity, Motors and Meters
Email: email@example.com Web: www.cpe.rutgers.edu
Ph: 732.932.9271 Fax: 732.932.8726
102 Ryders Lane New Brunswick, NJ 08901-8519
Rutgers, The State University of New Jersey
NJAES Ofﬁce of Continuing Professional Education
September 10, 2013 Course Code: EO0707CA14
Instructor: Sheldon Kay
Fee: $285 Multi-Fee: $250
New Jersey Agricultural NJ licensed water operator (T, W, or VSWS only) : $142.50
Experiment Station 6 TCHs for NJ water and wastewater license holders
This course has been designed to introduce attendees to the basics of
Electrical Training Programs electrical technology, including electrical terminology, theory, common
circuit design, test equipment, safety concerns and motor plate name data.
for Utility & Maintenance Personnel The material covered is easily understood through the use of simple terms
and the use of real-life experiences as examples. Speciﬁc topics will
include: fundamentals of voltage, current and resistance; basic circuits and
Electricity, Motors and Meters motor name plate data; multimeter functions and meggar use; clamp-on
September 10, 2013 amp probe use and circuit protection. A great introduction or refresher!
Fundamentals of Generators & Transformers
Fundamentals of Generators and Transformers
September 25 & 26, 2013
or by fax 732.932.1187 or phone 732.932.9271.
To unsubscribe and be removed from our list, contact us at firstname.lastname@example.org
We will never sell, rent or exchange your contact information with a 3rd party.
periodic messages from Rutgers via: (check all that apply)
YES, I want to be informed about courses and related information through
If no, please provide billing address here:
Is your credit card address the same as your mailing address?
Signature of Cardholder
Cardholder’s Name (printed)
Method of Payment
Please register me for the following:
September 25 & 26, 2013 Course Code: EO0703CA14
Charge to my credit card
Check, money order or Purchase Order
Instructor: Michael Madden
Ladder Logic Fee: $375 Multi-Fee: $325
NJ licensed water operators (T, W or VSWS only): $187.50
October 1 & 2, 2013 12 TCHs for NJ water and wastewater license holders
Variable Frequency Drives
This course provides an introduction to the theory and operation of these
October 24, 2013
important pieces of electrical equipment. If your facility uses them for
Mastercard AMEX Discover
emergency backup power or as a source of supplemental power, this
Motor Control Circuits
course will teach you the basic information you need to operate and
October 30 & 31 and November 1, 2013 maintain them safely and effectively. Topics include:
Basic Electrical Print Reading • Basic operation of generators and transformers
• Uses and limitations of the equipment
December 5, 2013
• Troubleshooting problems and maintenance issues
New Brunswick, NJ
Permit No. 153
• Other types of emergency power supplies.
O & M of Pumps
December 10 - 12, 2013
Ofﬁce of Continuing Professional Education www.cpe.rutgers.edu
Ladder Logic Motor Control Circuits: Wiring to Troubleshooting O&M of Pumps
October 1 & 2, 2013 Course Code: EO0711CA14 December 10-12, 2013 Course Code: EO0710CA14
October 30, 31 & November 1, 2013 Course code: EO0709CA14
Instructor: Terry Tomsky Instructor: Terry Tomsky Instructor: Terry Tomsky and Bob Waldron
Fee: $380 Multi-Fee: $340 Fee: $490 Multi-Fee: $450 Fee: $490 Multi-Fee: $450
NJ licensed water operators (T, W or VSWS only): $190 NJ licensed water operators (T, W or VSWS only): $245 NJ licensed water operators (T, W or VSWS only): $245
12 TCHs for NJ water and wastewater license holders 18 TCHs for NJ water and wastewater license holders 18 TCHs for NJ water and wastewater license holders
Approval #01-090005-30 Approval #01-090006-30 Approval #01-090010-30
Spend two days with Terry Tomsky to strengthen your electrical This course will present the theory of control operation and the proper
troubleshooting skills! This course will show you how line diagrams techniques for diagramming control circuits. Once you are familiar with This is, without a doubt, our most popular hands-on course with one of
provide fast and easily understood pictures of control circuit operations. the basic circuit, you will be shown how to apply the same theories to our most popular instructional teams. You will learn and practice accepted
Topics include: ladder diagrams, circuit design, voltage back feeds and more complex systems to quickly troubleshoot and repair equipment. procedures for both daily and long term maintenance of pumps and related
control circuit basics. Topics will include: equipment. Proactive maintenance and a thorough understanding of the
inner workings of a pump can save time and increase the efﬁciency of
PLEASE BRING YOUR VOLT/OHM METER!! • Basic control circuit and holding circuit wiring your operation. This class ﬁlls fast, so register early!
• Permissive circuits and light indication wiring
• Time interface circuits
• Electrical interlock interfacing circuits and timers.
Variable Frequency Drives
October 24, 2013 Course Code: EO0706CA14 FOUR CONVENIENT WAYS TO REGISTER
PLEASE BRING YOUR VOLT/OHM METER!!
Instructor: Joseph Longo
Phone: 732.932.9271, M-F 8:00 AM - 4:30 PM.
Please have your Visa, Mastercard, Discover or AMEX number ready.
NJ licensed water operators (T, W or VSWS only): $142.50
6 TCHs for NJ water and wastewater license holders Basic Electrical Print Reading Fax: 732.932.8726, 24 Hours. Please include credit card information
or copy of your check, money order or purchase order with your fax.
Approval #01-090008-30 December 5, 2013 Course Code: EO0708CA14
Instructor: Sheldon Kay
Mail: Registration Desk, NJAES Oﬃce of Continuing Professional
Education, Rutgers University, 102 Ryders Lane, New Brunswick, NJ
This class will introduce you to variable frequency drives (VFDs) and NJ licensed water operators (T, W or VSWS only): $142.50 08901-8519. Please make check payable to: Rutgers University
the reasons for their application in controlling the rotational speed of
motors and other electrical equipment. While most control circuits used
6 TCHs for NJ water and wastewater license holders
Approval #01-010110-30 Web: www.cpe.rutgers.edu
in industrial or commercial applications still use mechanical operating Payment Policy - All students must have prearranged for payment
This course presents the basic skills required for reading and interpreting to be admitted to the class (purchase order, check, VISA, Mastercard,
systems, the application of VFD’s is increasing as a way to reduce power American Express, Discover or money order).
consumption and other operating costs. Topics will include: theory, electrical prints and diagrams. A great introduction or refresher!
operation and applications; new installations; startup/feedback controls; Topics include: schematics, diagram logic, types and uses of diagrams/ Refunds - You may withdraw from this course with a full refund
control status, monitoring and troubleshooting, and maintaining/servicing schematics, symbols and markings, wiring diagrams, scales and (minus a $75 processing fee) provided our oﬃce is notiﬁed at least
conversions. three (3) full working days prior to the start of the course. Beyond that
VFDs. time, registrants may be responsible for the full registration fee.
Substitutions are welcomed.
www.cpe.rutgers.edu Ofﬁce of Continuing Professional Education www.cpe.rutgers.edu