NON DESTRUCTIVE TESTING WITH EDDY CURRENT ZET@ MASTER ZET@ by a76m823ik

VIEWS: 0 PAGES: 2

									                           NON DESTRUCTIVE TESTING
   Contrôle                  WITH EDDY CURRENT
 Mesure                                                                               NDTS India (P) Limited
                                                                       612 The Great Eastern Galleria, Plot No. 20, Sector 4, Nerul,
                                                                                       New Bombay - 400 706, India
Systèmes
                                                                       Tel.: + 91-22-2770 3913/3923, Fax: + 91-22-2770 3903
                                                                             Email: info@ndts.co.in, Website: www.ndts.co.in




               ZET@ MASTER
              ZET@ PREMIUM
For automatic on line inspection of tubes, pipes,
bars, wires, cables, forged parts and all the
metallic parts in the industry (Automotive,
Aircraft, Iron and steel industry…).

    Multi channels inspection for the
    Zet@ Master (up to 16 probes)
    Remote control for maintenance through the
    network
    Control of all peripheral devices
    Flexible configuration for matching all the
    varieties of the production lines.
    Stand alone, self contained equipment.
    Process parameter control
    Hot Rod inspection (up to 1200 ° C)
    Measurement of surface hardness, structure
    and case depth

                                                            PRODUCTION SOFTWARE
              EDDYSCAN 30 X
       The most versatile solution for today’s              ZET@ MICRO
       eddy current testing installations           The most economical solution for
       Up to 16 channels                            today’s     eddy     current   testing
       Dedicated software for all kind of           installation requiring the latest and
       applications                                 most innovative technology
       Control of peripheral devices                1 or 2 channels
                                                    With or without removable interface
                                                    Control of peripheral devices




                                                                      ZET@ MICRO
 MAGNETIZING AND DEMAGNETIZING UNITS                               EDDY CURRENT SENSORS
                                                                     AND ACCESSORIES
     For the inspection of ferromagnetic products
     Encircling and sector magnetizing units of 6                Standard encircling coils, probes and ID
     different sizes from 0,5 to 230 mm                          probes
     Full accessories, paint marker, encoder, table              Study and manufacturing of special
     support, rotating disk, rotating probe gun…                 sensors



 ROTATING SYSTEM
     For high speed inspection of longitudinal defects
     6 different sizes from 2 to 220 mm diameter




                                   SOME APPLICATIONS




    Defect detection on aluminum plates suitable                                 Multi wire inspection
      in all metallic conducting plates at 2 m/s                                 with only 1 equipment


Contrôle Mesure Systèmes–1 Chemin des Bruyères–F 71100 La Charmée–Tel : +33 3 85 94 14 14–Fax : +33 3 85 94 14 15
                        web Site : cmseddyscan.com – e-mail : contactcms@ cmseddyscan.com
         These informations are subject to change without prior notice.                         General Ed. 04/06

								
To top