D MAN MECH. - cstari

Document Sample
D MAN MECH. - cstari Powered By Docstoc
					       Syllabus of the Module T T-I
                  For the trade


DRAUGHTSMAN MECHANICAL
                    UNDER

CRAFT INSTRUCTOR TRAINING SCHEME



             TRADE TECHNOLOGY-I

                      (T T-I)




             Duration:- 3 Months
              Revised in - 2012




                  Government of India
           Ministry of Labour & Employment
     Directorate General of Employment & Training
  CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE
                 Salt Lake City, Kolkata
List of members attended in the “WORKSHOP” for revision of syllabi for various modules under Craft
Instructor Training Scheme (CTIS) held at Central Staff Training & Research Institute (CSTARI), Kolkata on
Dated 02.08.12

Sl. No.    NAME & DESIGNATION                          ORGANISATION                     REMARKS
           S/Shri./Smt.
    1.     R.N. BANDYOPADHYAY,                  CSTARI, Kol.-91.                         Chairman
           DIRECTOR
    2.     K.L. KULI, JDT                       CSTARI, Kol.-91.                         Member
    3.     ABHINOY NANDI, DDT                   ATI, MUMBAI                              Member
    4.     JAYAN JOHN, VICE PRICIPAL            DIRECTORATE OF TRAINING                  Member
                                                KERALA
    5.     A.V. BALACHANDRAN ACHARY,            DIRECTORATE OF TRAINING                  Member
           VICE PRICIPAL                        KERALA
    6.     A.K. DUTTA, ADT                      ATI, KOLKATA                             Member
    7.     T.K. GHOSH, TO                       CSTARI, KOLKATA-91.                      Member
    8.     C.S. MURTHY, DDT                     ATI-EPI ,HYDERABAD                       Member
    9.     M.S. EKAMBARAM, DDT                  ATI-EPI, HYDERABAD                       Member
    10.    MRINMAY SAMANTA, PRINCIPAL           DIT, WEST BENGAL                         Member
    11.    SHRIKANT SONAVANE                    ATI, MUMBAI                              Member
    12.    A.K. MANDAL, ADT                     ATI, KOLKATA                             Member
    13.    D.K. CHATTOPADHYA, TO                ATI, KOLKATA                             Member
    14.    AMRIT PAL SINGH, DDT                 DGET (HQ)                                Member
    15.    ASHIS CHAKRABORTY                    CSTARI, KOLKATA.                         Member
    16.    PRONAB PARUI                         TIT DEPT., W. BENGAL                     Member
    17.    SUBRATA GHOSH                        TIT DEPT., W. BENGAL                     Member
    18.    HARDHAN DAS, TO                      CSTARI, KOLKATA.                         Member
    19.    TAPAN KR. HALDAR                     ATI, KOLKATA                             Member
    20.    L.K. MUKHERJEE, DDT                  CSTARI, KOLKATA-91.                      Member
    21.    NIRMALYA NATH, ADT                   CSTARI, KOLKATA-91.                      Member
    22.    K.N. HALDER, DDT                     CSTARI, KOLKATA.                         Member
    23.    R.N. MANNA, TO                       CSTARI, KOLKATA                          Member
    24.    MOHAN SINGH, TO                      CSTARI, KOLKATA                          Member
    25.    P. BISWAS, D/MAN                     CSTARI, KOLKATA                          Member
    26.    HEMANT KUJUR, D/MAN                  CSTARI, KOLKATA                          Member
                            GENERAL INFORMATION



1. Name of the Trade           : Draughtsman Mechanical


2. N. C. O. Code No.           :


3. Name of the Module : Trade Technology – I


4. Duration                    : 03 Months


5. Entry Qualification: (a) National Trade Certificate in the relevant trade OR
                        (b) National Apprenticeship Certificate in the Relevant trade
                            OR
                        (c) Diploma in the relevant branch of Engineering

6. Batch Size           : 20 Trainees

7. Space Norms         : (a) Class Room : 30 Sq. Mt.
                         (b) Drawing Hall : 100 sq. meter.

8. Power Norms          : (a) Class Room : 1 kw (6000 lumen)
                          (b) Drawing Hall : 5.5 kw (25000 lumen)

9. Trainer’s Qualification: (a) Academic Qualification :- 10th class pass or equivalent.
                             (b) Technical Qualification : Degree in appropriate branch of
                                engineering from recognized University
                                OR
                                Three year Diploma in appropriate branch of engineering
                                from recognized Board / Institution. In case of two units,
                                one trainer must be Degree in Engineering.
                             (c) Passed National Craft Instructor Training course in same
                                or relevant trade.
                             (d) Experience : Two years for Degree holder and Five
                                  years for Diploma holder and NCIT as an Instructor.
                         COURSE STRUCTURE




                Module :- TRADE TECHNOLOGY- I
                                      (TT-I)




Sl.                                        Allotted       Allotted
        Components          Units
No.                                       Time/week     Time/module

1.    Trade Technology   a) Theory      14 hrs/wk     14x13=182hrs

                         b) Practical   25hrs/wk      25x13=325hrs

2.    Library            C) Library     1hr/wk        1x13=13hrs

                                        40hrs. / wk   520 hrs. / module




                            Duration: 3 Months.
                          REVISED SYLLABUS OF
                TRADE:- DRAUGHTSMAN MECHANICAL
                MODULE :- TRADE TECHNOLOGY –I (TT-I)
                UNDER CRAFT INSTRUCTOR TRAINING SCHEME

WEEK
                     THEORY                                PRACTICAL
 NO
 01  Importance       of   trade    in    the   Conventional representation and
     development           of       industry.   different rule as per B.I.S and other
     Environmental       occupational    and    International Standards and there
     safety hazards specific to the trade       equivalent i.e B.I.S, B.S, DIN, JIS,
     like electrical, computer and related      ASTM, AAR. Development of
     shop floor hazards. Role of B.I.S and      surfaces. Development of cutting
     International Standards there uses in      plane for various types of pipe –
     modern industry. Indian standards          different sizes and angles.
     and awareness of other International       Use the I.S. code of Practical
     Standards. Definition of development       following SP-46 : 2002 / latest
     & its need in industry. Different
     methods of surface development.
 02  General principle of projection and        Orthographic projection of machine
     their types. General principles of         parts & vice-versa. Dimension
     dimensioning on engineering drawing.       techniques and its application.
 03  Limits, fits and tolerances (including     Indication of linear and angular
     geometrical), interchangeability and       tolerances on technical drawing.
     its terms as per IS. Method of             Different methods of showing
     indicating surface texture on technical    surface finish symbol on working
     drawing.                                   drawings.
 04  Importance of sectional views, types       Different types of section. Screw
     of sectional views and there uses.         thread and their representation in
     Types of fasteners and there uses.         drawing.
     Screw        threads      term      and    Practice on different types of
     nomenclature. Types of rivets and          riveted and welded joints.
     riveted joint. Description of welding
     joints and their representation (actual
     and symbolic) Indication of welding
     symbols on drawing as per I.S.
 05  Different types detailed and assembly      Drawing of a simple bearing and
     drawing. Types of bearing, difference      footstep    bearing.     Details   &
     between plain and anti-frictional          assembly drawing of roller and ball
     bearing. Advantages of anti-frictional     bearing including taper roller
     bearing over plain bearing.                bearing.
 06  Brief description of different types       Different types of pipe layout, pipe
     pipes and tubes, purpose of pipe           joints, pipe fittings, flange, union
     fitting, pressure ratings, joints and      etc. Different piping drawing i.e
     their fittings. Pipe material and          developed      drawing      diametric
     specification. Boiler mountings and        drawing & orthographic projection.
     accessories. Different parts of I.C       Drawing of cams and followers with
     engine and there purposes. Working        different motion.
     principle of 2-stroke and 4- stroke
     engine. Different types of cam and
     followers used in industry, kinds of
     motion displacement diagram.
07   Brief description and function of         Assembly drawing of different types
     centrifugal and reciprocating pump.       of     pumps      (centrifugal    &
     Different types of valves and their       reciprocating), valves and safety
     function.                                 valves.

     Brief description working principles      Assembly and details drawing of
     and function of screw jack.               screw jack.
08   Different types of jig and fixture.       Detail drawing of a milling fixture.
     Section of standard bush. Different       Design and drawing of drilling jig.
     locating methods and clamping             Sketching of different types of
     devices. Function of gauges, different    gauges such as plug, snap, thread,
     types of gauges and there uses. Use       taper etc.
     of template in industry.

     Press tool – types, parts and function.   Drawing of different types of press
                                               tool giving nomenclature of each
                                               part.
09   ALLIED TRADE: OVERVIEW
     M.M.V
     Safety precaution, description uses Familiarisation with saws, chisels,
     and care of hand tool including raps, planes, rules, try-square,
     construction rule and allowance.    scribers and dividers.

     ALLIED TRADE: OVERVIEW                    Familiarisation with different types
     FOUNDARY                                  of mould, cores and core making,
     Hand tools use for moulding,              moulding tools. Floor, box moulding
     description and care of hand tools.       and part patterns.
     Description of different type of
     moulding, core sand and dressing
     materials. Machining / Shrinkage
     allowances.
                                            Familiarisation with hand tools such
     ALLIED TRADE: OVERVIEW                 as hammers, stakes, mallet,
     SHEET METAL WORKER                     punches etc. Development of
     Names and description of common surfaces from working drawing.
     equipments. Different types and uses
     of joint employed in sheet metal work.
                                            Familiarisation with arc welding and
     ALLIED TRADE: OVERVIEW                 gas     welding,     welding     torch,
     WELDER (G & E)                         electrodes, filler wires, tools used in
     Different types of welding and welding the trade.
     joints and symbols as per BIS.
        Surface     and    edge     preparation
        required for welding.
 10                           PRACTICAL RELATED THEORY
 TO        Practice on computer. CAD commands and use of different menus and
 12        different tool bars. Editing drawing using different options under modify
           menu. Creating dimensions of drawing with the help of dimension menu.
           Layer setup and creating sectional drawing. Familiarization with different
           options for creating dimensions and adding text to drawing creating
           drawing in different layers. Creating sectional drawing using different
           patterns. Editing objects through properties bar.

            Industrial cum study tour in different industries (at least two) having
            drawing & design office with required facilities.
                   Project work and Industrial Visit related to the trade (2 days).
  13                                       Revision &
                                     FINAL EXAMINATION


NOTE : For allied trades (Week No. 9 ) Training / Industrial visit may be arranged in the
relevant industries, if the allied trade facilities are not available in the institute.
             LIST OF TOOLS & EQUIPMENT FOR A BATCH OF 20 TRAINEES
            Trade: DRAUGHTSMAN MECHANICAL
                       Module : TT-I

SL.NO.                        DESCRIPTION                           QUANTITY
                                   Trainees Kit
 1       Drawing Instrument Box with accessories.                   20+1   sets
 2       Set square celluloid 45(250x1.5mm)                         20+1   sets
 3       Set square celluloid 60(250x1.5mm)                         20+1   sets
 4       French-curves(set of 20 celluloid)                         20+1   sets
 5       Drawing Board (700 x 500) IS:1444                          20+1   sets
 6       Tee-Square (700 mm blade) IS:1360                          20+1   sets
 7       Mini Drafter                                               20+1   sets

                                 General Outfit

1A)      Computer 3GHz or latest with 1GB 0r higher RAM with         11 nos.
         compatible motherboard DVD combo drive with latest x
         version, hard disk with 160 GB or above, 19″ TFT
         Monitor,1 GB AGP card, 10/100 Ethernet card, Internal
         modem, UPS with 800 VA / Latest Version
 B)      Software: MS-Office XP or latest version of operating       11 users
         software Auto-CAD with power pack or latest version.        licenced
 C)      Laser Jet printer Latest model – Print, Copy and Scan         1 no.
         1200x1200dpi, 16MB
 D)      UPS-10KVA                                                     1 no.
  2      Chest of drawers (8 drawers)                                  2 nos.
  3      Trainees Locker (8 drawers )                                  3 nos.
  4      Book Self                                                     2 nos.
  5      Steel tape 2 meters (Pull type)                               1 nos.
  6      Drawing table for A1 sheet                                 20+1 nos.
  7      Stools (Revolving type) Adjustable height                  20+1 nos.
  8      Print Trimmer 1050 mm cutting edge                            1 no.
  9      T.O’s Table 6ftX4ft                                           1 no.
 10      T.O’s Chair Armed chair - Revolving                           1 no.
 11      Almirah Steel 6ft. height or higher                           2 nos.
 12      Computer table                                               11 nos.
 13      Computer chairs - Revolving                                  21 nos.
 14      Table for printers                                            1 no.
 15      D.L.P Projector 2000 LUMEN OR HIGHER                          1 no.
 16      Motorised Screen forv Projector                               1 no.
 17      White board 6FT. x 4FT.                                       1 no.
 18      Fire Fighting Equipments                                   As required
 19      First Aid Box                                                 1 no.
     Syllabus of the Module – TT-II

                For the trade

DRAUGHTSMAN MECHANICAL
                    UNDER

CRAFT INSTRUCTOR TRAINING SCHEME


            TRADE TECHNOLOGY-II

                     (T T-II)




             Duration:- 3 Months
             Designed in - 2012




                  Government of India
           Ministry of Labour & Employment
     Directorate General of Employment & Training
  CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE
                 Salt Lake City, Kolkata
List of members attended in the “WORKSHOP” for revision of syllabi for various modules under Craft
Instructor Training Scheme (CTIS) held at Central Staff Training & Research Institute (CSTARI), Kolkata on Dated
02.08.12

Sl. No.    NAME & DESIGNATION                          ORGANISATION                     REMARKS
           S/Shri./Smt.
    1.     R.N. BANDYOPADHYAY,                 CSTARI, Kol.-91.                         Chairman
           DIRECTOR
    2.     K.L. KULI, JDT                      CSTARI, Kol.-91.                          Member
    3.     ABHINOY NANDI, DDT                  ATI, MUMBAI                               Member
    4.     JAYAN JOHN, VICE PRICIPAL           DIRECTORATE OF TRAINING                   Member
                                               KERALA
    5.     A.V. BALACHANDRAN ACHARY,           DIRECTORATE OF TRAINING                   Member
           VICE PRICIPAL                       KERALA
    6.     A.K. DUTTA, ADT                     ATI, KOLKATA                              Member
    7.     T.K. GHOSH, TO                      CSTARI, KOLKATA-91.                       Member
    8.     C.S. MURTHY, DDT                    ATI-EPI ,HYDERABAD                        Member
    9.     M.S. EKAMBARAM, DDT                 ATI-EPI, HYDERABAD                        Member
    10.    MRINMAY SAMANTA, PRINCIPAL          DIT, WEST BENGAL                          Member
    11.    SHRIKANT SONAVANE                   ATI, MUMBAI                               Member
    12.    A.K. MANDAL, ADT                    ATI, KOLKATA                              Member
    13.    D.K. CHATTOPADHYA, TO               ATI, KOLKATA                              Member
    14.    AMRIT PAL SINGH, DDT                DGET (HQ)                                 Member
    15.    ASHIS CHAKRABORTY                   CSTARI, KOLKATA.                          Member
    16.    PRONAB PARUI                        TIT DEPT., W. BENGAL                      Member
    17.    SUBRATA GHOSH                       TIT DEPT., W. BENGAL                      Member
    18.    HARDHAN DAS, TO                     CSTARI, KOLKATA.                          Member
    19.    TAPAN KR. HALDAR                    ATI, KOLKATA                              Member
    20.    L.K. MUKHERJEE, DDT                 CSTARI, KOLKATA-91.                       Member
    21.    NIRMALYA NATH, ADT                  CSTARI, KOLKATA-91.                       Member
    22.    K.N. HALDER, DDT                    CSTARI, KOLKATA.                          Member
    23.    R.N. MANNA, TO                      CSTARI, KOLKATA                           Member
    24.    MOHAN SINGH, TO                     CSTARI, KOLKATA                           Member
    25.    P. BISWAS, D/MAN                    CSTARI, KOLKATA                           Member
    26.    HEMANT KUJUR, D/MAN                 CSTARI, KOLKATA                           Member
                            GENERAL INFORMATION



1. Name of the Trade: Draughtsman Mechanical

2. N. C. O. Code No. :

3. Name of the Module : Trade Technology – II


4. Duration : 03 Months


5. Entry Qualification        : (a) same as trade Technology – I and
                                (b) completed training in TT-I module of
                                     the relevant trade of modular pattern
                                     of craft Instructor’s Training Scheme
                                     (CITS)
6. Batch Size                : 20 Trainees

7. Space Norms               : (a) Class Room : 30 Sq. Mt.
                               (b) Drawing Hall : 100 sq. meter.

8. Power Norms                  : (a) Class Room : 1 kw (6000 lumen)
                                  (b) Drawing Hall : 5.5 kw (25000 lumen)

9. Trainer’s Qualification: (a) Academic Qualification :- 10th class pass or equivalent.
                            (b) Technical Qualification : Degree in appropriate branch of
                                engineering recognized University
                                OR
                                Three year Diploma in appropriate branch of engineering
                                from recognized Board / Institution. In case of two units,
                                one trainer must be Degree in Engineering.
                            (c) Passed National Craft Instructor Training course in same
                                or relevant trade.
                            (d) Experience : Two years for Degree holder and Five years
                                 For Diploma holder and NCIT as an Instructor.
                         COURSE STRUCTURE




                Module :- TRADE TECHNOLOGY- II
                                      (TT-II)




Sl.                                         Allotted       Allotted
        Components          Units
No.                                        Time/week     Time/module

1.    Trade Technology   a) Theory       14 hrs/wk     14x13=182hrs

                         b) Practical    25hrs/wk      25x13=325hrs

2.    Library            C) Library      1hr/wk        1x13=13hrs

                                         40hrs. / wk   520 hrs. / module




                             Duration: 3 Months
                  REVISED SYLLABUS OF
           TRADE:- DRAUGHTSMAN MECHANICAL
          MODULE :- TRADE TECHNOLOGY –II (TT-II)
       UNDER CRAFT INSTRUCTOR TRAINING SCHEME

WEEK
                     THEORY                                PRACTICAL
 NO
 01    Types of assembly drawings,             Practice of detailed & assembly
       preparing & planning of assembly        drawings of the components of
       drawings. Elements of production        different machine and machine
       drawing.                                parts.
 02    Types of geometrical & dimensional      Representation of geometrical and
       tolerance.                              dimensional tolerances on drawing.
       Selection of tolerance in hole basis    Drawing of Keys, Cotters, Flanges.
       and      shaft     basis    system.     Drawing practice for method of
       Terminology for surface roughness       indicating surface texture on
       system & selection of fit.              technical drawing. Representation
                                               of surface roughness on drawing.
 03    Transmission of power by belt, gear, Drawing of different types of
       pulleys, chain and couplings.        pulleys.     Working       drawing     of
                                            coupling and knuckle joint. Design
                                            and drawing of gears (spur helical
                                            & bevel) worm and worm wheel.
 04    Symbolic representation of welds on Detailed drawing of structural work.
       structural work.                     Assembly drawing of different types
                                            of welded joints used in industries.
 05    Engineering Inspection & inspection Use        of     different     precision
       techniques.                          measuring instruments & gauges.
 06    Difference between Conventional & Demonstrations on CNC machines.
       CNC machining system.
       Working      principles   of    CNC
       machines.
 07    ALLIED      TRADE:       OVERVIEW Familiarisation with fitter related
 &     FITTER:                              skills. Different types of hand tools,
 08    Description and application of cutting           tools     and     measuring
       simple hand tools, cutting tools and instruments used in marking,
       measuring instruments etc.           preparing & fitting.

       ALLIED       TRADE:      OVERVIEW
       MECH. MOTOR VEHICLE:
       Brief description of I.C engine and     Familiarisation and identification of
       its parts such as cylinder block,       different parts of I.C engine. Both
       piston, connecting rod, cam shaft,      spark ignition and compression
       carburettor,    spark   plug,  Fuel     ignition:  2-stroke    &     4-stroke
       Injection pump, etc.                    engines.
     ALLIED TRADE: OVERVIEW
     TURNER                                 Familiarisation with plain, step,
     Lathe – its types, parts, accessories, boring and taper turning, thread
     tools, tool materials and different cutting.
     operations.

     ALLIED TRADE: OVERVIEW
     MACHINIST:
     Description of shaping, planing & Familiarisation                with simple
     milling machines, their parts, operations on milling and shaping
     accessories         and         different machine.
     mechanism and operations.
09   Analyzing the drawing using inquiry option. Creating isometric drawing
To   from orthographic views. Editing properties of the drawing. Making, editing
11   & inserting block under insert menu. Introduction of solid and parametric
     modelling. Methods of generating solids and solid editing. Setting up of
     drawing limits units & scale. Use of 3D modelling with solid modelling
     software for FEA. Saving a drawing file in other formats. Detailed &
     Assembly of simple machine drawing. Creating layout, page setup,
     selection of plotting devices & plotting a drawings. Industrial cum study
     tour in different organization having drawing & design office with required
     facilities. Awareness about design / drawing related latest software.
     Project work and Industrial Visit related to the trade (2 days).
12   Overview of programming & operation of CNC.
     Concept on MASTER CAM.
13                                       Revision &
                                  FINAL EXAMINATION
 LIST OF TOOLS & EQUIPMENT FOR A BATCH OF 20 TRAINEES

            Trade: DRAUGHTSMAN MECHANICAL
                             Module : TT-II
SL.NO.                        DESCRIPTION                        QUANTITY
                                   Trainees Kit
 1       Drawing Instrument Box with accessories.                20+1   sets
 2       Set square celluloid 45(250x1.5mm)                      20+1   sets
 3       Set square celluloid 60(250x1.5mm)                      20+1   sets
 4       French-curves(set of 20 celluloid)                      20+1   sets
 5       Drawing Board (700 x 500) IS:1444                       20+1   sets
 6       Tee-Square (700 mm blade) IS:1360                       20+1   sets
 7       Mini Drafter                                            20+1   sets
                                  General Outfit
1A)      Computer 3GHz or latest with 1GB or Higher RAM with      11 nos.
         compatible motherboard DVD combo drive with latest x
         version, hard disk with 160 GB or above, 19″ TFT
         Monitor,1 GB AGP card, 10/100 Ethernet card, Internal
         modem, UPS with 800 VA or Latest version
 B)      Software: MS-Office XP or latest version of operating    11 users
         system Auto-CAD with power pack or latest version.       licenced
 C)      Laser Jet printer Latest model Print, Copy and Scan        1 no.
         1200x1200dpi, 16MB – A3 size
 D)      UPS-10KVA                                                   1 no.
  2      Chest of drawers (8 drawers)                               2 nos.
  3      Trainees Locker (8 drawers )                               3 nos.
  4      Book Self                                                  2 nos.
  5      Steel tape 2 meters (Pull type)                            1 nos.
  6      Drawing table (A1 sheet)                                20+1 nos.
  7      Stools(Revolving and adjustable type)                   20+1 nos.
  8      Print Trimmer 1050 mm cutting edge                          1 no.
  9      T.O’s Table 6ft. X 4ft.                                     1 no.
 10      T.O’s Chair – revolving type with Arm                       1 no.
 11      Almirah Steel 6 ft.                                        2 nos.
 12      Computer table                                            11 nos.
 13      Computer chairs (Revolving type)                          21 nos.
 14      Master cam software latest version                        10 user
                                                                   license
 15      Table for printers                                          1 no.
 16      D.L.P Projector – 2000 LUMEN OR HIGHER                      1 no.
 17      Motorised screen for projector                              1 no.
 18      White board 6ft. X 4ft.                                     1 no.
 19      Fire Fighting Equipments                                As required
 20      First Aid Box                                               1 no.
           FURNITURE, ACCESSORIES AND AUDIO VISUAL AIDS FOR
      THE MODULES TT-I AND TT-II (COMMON FOR ALL ENGG. TRADES)

01 Class Room Chairs (armless) / Dual desk may also be allowed                 20 /10
02 Class Room Tables ( 3ft X 2ft) / Dual desk may also be allowed              20 /10
03 Chair for Trainer (armed) movable                                             01
04 Table for Trainer (4 ½ ft X 2 ½ ft) with Drawer and cupboard                  01
05 LCD / LED Projector                                                           01
06 Multimedia Computer System with all accessories with UPS
                                                                               01 set
   (.5 KVA)
07 Computer Table                                                                01
08 White Board (6ft X 4 ft.)                                                   01 no.
09 LCD Projector Screen
10 Air Conditioner 1.5Ton (OPTIONAL)                                           02
11 Wall Clock                                                                01 no.
                                                                               As
 12 Wall charts, Transparencies and DVDs related to the trade
                                                                            required
13.   Laser Printer with scanner                                          01
14.   Steel Cupboard with 8 pigeon lockers                                3
15.   Work bench for fitters with two vices of 100mm                      2
16.   Steel cupboard 180x90x45cm                                           2
17.   Steel cupboard 120x60x45cm                                          2
18.   Multi drawer tool rack trolley with minimum 4 drawers and 20 tool   04
      capacity
19.   First aid box.                                                       1


      LIST OF FURNITURE, ACCESSORIES AND AUDIO VISUAL AIDS FOR
           AUDIO VISUAL LAB (COMMON FOR ALL ENGG. TRADES)

 01 Class Room Chairs (armless) / Dual desk may also be allowed                30 /15
 02 Class Room Tables ( 3ft X 2ft) / Dual desk may also be allowed             30 /15
 03 Chair for Trainer (armed) movable                                            01
 04 Table for Trainer (4 ½ ft X 2 ½ ft) with Drawer and cupboard                 01
 05 LCD Projector                                                                01
 06 Multimedia Computer System with all accessories with UPS
                                                                               01 set
    (.5 KVA)
 07 Computer Table                                                               01
 08 White Board (6ft X 4 ft.)                                                  01 no.
 09 LCD Projector Screen
 10 Air Conditioner 1.5Ton (OPTIONAL)                                            02
 11 Wall Clock                                                                 01 no.
                                                                                As
  12 Wall charts, Transparencies and DVDs related to the trade
                                        required
13   Document Camera / Visualiser          01
14   Smart Board / Inter Active Board      01
15   Over Head Projector                   01
16   Video Camera with stand               01
17   Printer cum Scanner                   01

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:0
posted:6/4/2013
language:English
pages:17
wu yunyi wu yunyi
About wuyyok@163.com