2B0-202
ES NetSight Atlas Exam: 2B0-202
Demo Edition
C
CERT MAGIC
1 http://www.certmagic.com
2B0-202
QUESTION: 1 Which of the following configuration files can you view while comparing archives in Inventory Manager?
A. All archived configuration files B. Only files in which a difference in configurations is found C. All archived database files D. A and C
Answer: B
QUESTION: 2 What benefits are gained with SNMPv3?
A. Better error codes B. Encrypted messages C. Fast table retrieval D. All of the above
Answer: D
QUESTION: 3 Which RMON groups are accessible from the Device Manager?
A. Alarm and Event B. Host and Matrix C. Statistics and History D. Filter and Capture
Answer: C
QUESTION: 4 Which of the following actions can Atlas Console initiate when certain alarms, events or traps occur on the network?
2
http://www.certmagic.com
2B0-202
A. Send an e-mail notification and then shut down Atlas Console B. Send an e-mail notification or run a program C. Write the event log to an HTML file for web-based viewing D. Run a program or shut down Atlas Console E. A and C only
Answer: B
QUESTION: 5 The Firmware Upgrade Wizard allows you to enter a reset delay time for devices that support timed reset. How can you reset devices that do not support timed reset?
A. You cannot reset devices that do not support timed reset. B. After selecting the devices in the table, click Start to initiate manual resets. C. It is necessary to walk to the device to initiate a reset. D. After closing the Firmware Upgrade Wizard, you open the Manual Device Reset Wizard.
Answer: B
QUESTION: 6 Device Manager provides all of the following, EXCEPT:
A. Graphic representation of a device B. Configuration file upload/download C. System level configuration D. Broadcast Suppression configuration
Answer: C
QUESTION: 7 With SNMPv3, the message is encrypted
A. to prevent disclosure of sensitive information while en route
3
http://www.certmagic.com
2B0-202
B. to make sure the user has permission to access the device C. to verify the message was not modified en route D. to read or to modify subsets of the target data E. Both A and C
Answer: A
QUESTION: 8 In the context of Policy Manager, a Role is a:
A. Feature set that is assigned after authentication exchange and the port is available B. Feature used to assign access control and/or class of service to network traffic based on its OSI layer C. Feature used to enforce the default role on a port D. Feature used to combine classification rules to implement permission and denial to network resources
Answer: A
QUESTION: 9 The Goto symbol is used as a navigational tool to jump to another map.
A. True B. False
Answer: A
QUESTION: 10 What service must be running to save a configuration?
A. TFTP B. BOOTP C. SNMP trapd D. All of the above
4
http://www.certmagic.com
2B0-202
Answer: A
QUESTION: 11 Which version uses IP address-based access lists and community strings for authentication?
A. SNMPv1 B. SNMPv2 C. SNMPv3 D. A and B E. All of the above
Answer: D
QUESTION: 12 VLAN configurations can be deployed in Atlas Lite via the Device Manager, providing the device supports it.
A. True B. False
Answer: A
QUESTION: 13 Inventory Manager Firmware Upgrade Wizard executes download operations in parallel on the number of devices specified in the "Groups of" field. What value do you enter to have the download operations performed serially?
A. serial B. 0 C. 1 D. 6
Answer: C
5
http://www.certmagic.com
2B0-202
QUESTION: 14 What is the purpose of the SNMP trapd Server?
A. To create the trap log file B. To send traps to devices C. To use the trap log file as a trap repository D. To provide device recovery services to remote devices E. Both A and C
Answer: E
QUESTION: 15 Which of the following statements describes the benefit to the network administrator of archiving device configurations?
A. To reconfigure a device from a BOOTP state B. To reconfigure device access properties after a device reset C. To isolate the source of network problems due to changes in configuration files D. All of the above E. A and C
Answer: E
QUESTION: 16 ACL rules are considered redundant if
A. They are the same rule Type B. They are defined by parameters that would match the same packet traffic C. They have the same description D. All of the above E. A and B
Answer: E
6
http://www.certmagic.com
2B0-202
QUESTION: 17 What is the purpose of the Packet Evaluation Tool?
A. To verify that the packet will hit selected ACLs based on other router configurations B. To test whether a defined packet will be denied or allowed based on selected ACL C. To evaluate packet syntax D. All of the above
Answer: B
QUESTION: 18 The Atlas Console process that writes the definitions in the VLAN model to selected devices or ports is called
A. Pushing B. Enforcing C. Requesting D. Verifying
Answer: B
QUESTION: 19 The benefit to defining groups is to enable focused management of network elements.
A. True B. False
Answer: A
QUESTION: 20 FlexViews can be viewed as a
A. Table
7
http://www.certmagic.com
2B0-202
B. Bar graph C. Pie chart D. All of the above E. A and C only
Answer: D
8
http://www.certmagic.com